On Sun, Apr 20, 2014 at 9:47 PM, Nex6|Bill n6gh...@yahoo.com wrote:
Kinda new to OpenBSD, (have a couple of 5.4 installs in VMs); whats the
standard for alias's? i added it to the .profile but some googling seems to
indicate that that wont work. that you have to export, and do an .kshrc file?
On Sun, Apr 20, 2014 at 05:29:41PM -1000, Felix Johnson wrote:
I used an Atheros-based nic (but the firmware wouldn't load,
and yes, I copied it to /etc/firmware).
Why manual copying? Running fw_update(1) was not an option?
Does this nic actually get attached by a driver?
And then I tried
On 2014-04-20, Benjamin Baier program...@netzbasis.de wrote:
It's Advertised as an EP-N8508.
It is most likely a rebrand, which uses the rtl8188cus (very low cost chip)
This should be supported by the urtwn driver.
Just need to recognize the USB device number.
In this case it's idVendor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi,
I got two SunSoft Unix System V 3.2 of 1994. With still sealed installation
diskettes, user's and maintenance Guides. Anyone interested? I could ship them
from germany.
Christopher
- --
http://gmerlin.de
OpenPGP:
On Sun, Apr 20, 2014 at 10:09:19PM +0200, Benjamin Baier wrote:
It's Advertised as an EP-N8508.
It is most likely a rebrand, which uses the rtl8188cus (very low cost chip)
This should be supported by the urtwn driver.
Just need to recognize the USB device number.
In this case it's idVendor
On 21 April 2014, Juan Francisco Cantero Hurtado i...@juanfra.info wrote:
On Sun, Apr 20, 2014 at 10:09:19PM +0200, Benjamin Baier wrote:
It's Advertised as an EP-N8508.
It is most likely a rebrand, which uses the rtl8188cus (very low cost chip)
This should be supported by the urtwn driver.
Philip Guenther guent...@gmail.com wrote:
On Sun, Apr 20, 2014 at 9:47 PM, Nex6|Bill n6gh...@yahoo.com wrote:
Kinda new to OpenBSD, (have a couple of 5.4 installs in VMs); whats the \
standard for alias's? i added it to the .profile but some googling seems \
to
indicate that that wont
Hello,
5.4-Rel here, GENERIC.MP kernel.
Rather often I need to connect my laptop to networks without DHCP service
(sometimes I use a direct connection through a crossover cable, too); so
it would be nice to have a semi-automatic configuration procedure.
I'm trying to exploit the dhclient's
On Mon, Apr 21, 2014 at 7:22 AM, Martin Brandenburg
mar...@martinbrandenburg.com wrote:
...
I'm going to add that .profile may be read by non-terminal login software
(xdm, etc.) as well, so it's not a bad idea to limit terminal
initialization stuff to interactive login sessions:
Hmm, I haven't
On 14-04-21 09:36 AM, Philip Guenther wrote:
Hmm, I haven't seen anything like that in many many years. $ENV used
to be processed by non-interactive scripts, but that was a bug fixed
in 2007. I would be interested in hearing details of specific cases
where .profile is parsed by non-terminal
Hello,
I google-ed a lot, but it seems that there is no trivial solution to
this point.
I extensively use console (and tmux), ending up with a lot of
simultaneously open shells; I normally suspend my laptop when I leave,
so it would be a security enhancement to automatically lock all of them.
On Mon, Apr 21, 2014 at 7:49 AM, Adam Thompson athom...@athompso.net wrote:
On 14-04-21 09:36 AM, Philip Guenther wrote:
Hmm, I haven't seen anything like that in many many years. $ENV used to be
processed by non-interactive scripts, but that was a bug fixed in 2007. I
would be interested in
Is there a paper explaining the purpose of Linux compatibility in OpenBSD?
I'm not from UNIX time and I'm curious when and why this feature was added.
Thanks.
On 14-04-21 09:56 AM, Philip Guenther wrote:
On Mon, Apr 21, 2014 at 7:49 AM, Adam Thompson athom...@athompso.net wrote:
I have developers using Ant deploy scripts that SSH into the target
host repeatedly, once for every build step. Ant does a reasonably
good job of emulating a terminal and
On Mon, Apr 21, 2014 at 8:20 AM, Mihai Popescu mih...@gmail.com wrote:
Is there a paper explaining the purpose of Linux compatibility in OpenBSD?
I'm not from UNIX time and I'm curious when and why this feature was added.
It actually predates OpenBSD, being part of the original import when
On Mon, Apr 21, 2014 at 8:20 AM, Mihai Popescu mih...@gmail.com wrote:
Is there a paper explaining the purpose of Linux compatibility in OpenBSD?
I'm not from UNIX time and I'm curious when and why this feature was added.
It actually predates OpenBSD, being part of the original import when
previously on this list Mihai Popescu contributed:
Is there a paper explaining the purpose of Linux compatibility in OpenBSD?
I'm not from UNIX time and I'm curious when and why this feature was added.
If you want to run say Opera that cannot be recompiled then you need
it. Unfortunately the
Hi,
Sorry for the noise, but after the upgrade with the last snapshot all
traffic flows only on default queue.
[ns]~$ systat queue
QUEUE BW SCH PRIO PKTSBYTES
DROP_P DROP_B QLEN BORROW SUSPEN P/S B/S
rootq 100M
It exists on freebsd, but I never used it. I remove
every bit of not necessary code from the kernel to
prove manhood, or whatever you call it. Compability
should enable you to run linux binaries. At the mo-
ment almost every known app works on openbsd or free
bsd. Personally, I do not care having
The original message was received at Mon, 21 Apr 2014 11:26:46 +0800
from nmsu.edu [129.247.149.220]
- The following addresses had permanent fatal errors -
misc@openbsd.org
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of readme.zip]
On Mon, Apr 21, 2014 at 16:51, Alessandro DE LAURENZIS wrote:
Hello,
I google-ed a lot, but it seems that there is no trivial solution to
this point.
I extensively use console (and tmux), ending up with a lot of
simultaneously open shells; I normally suspend my laptop when I leave,
so it
On 21.04.2014 19:38, Atanas Vladimirov wrote:
Hi,
Sorry for the noise, but after the upgrade with the last snapshot all
traffic flows only on default queue.
[ns]~$ systat queue
QUEUE BW SCH PRIO PKTSBYTES
DROP_P DROP_B QLEN BORROW SUSPEN P/S B/S
[ OpenBSD related discussion removed]
It may be this problem is not software related. Try to check the following:
- thermal paste from the CPU is not dry (remove it anyway and reapply a
fresh one)
- heatsink fins are not filled in with dust (if so, clean it)
- heatpipes, if present on heatsink,
Well, you wasted time of a lot of the people stripping out important
info just because you thought that it is not important.
Link to picture of those outputs somewhere on Internet is zillion times
better then trying explain in number of emails why do you think
opposite.
And why? Because of No
Folks,
still unclear after reading the hier man page where is the most suitable
node for a NFS server export directory.
I would like to stay as much close as possible to the BSD tradition,
so I would put data for or from services inside /var, but it seems that
no predefined standard node is
There is no standard place. Many sites put all their exports under /export,
but for N sites using NFS there are probably log(N) ways to do it.
I am unaware of any preference OpenBSD has, perhaps someone else has a more
relevant insight?
-Adam
On April 21, 2014 2:39:43 PM CDT, Alessandro DE
On Mon, Apr 21, 2014 at 21:39, Alessandro DE LAURENZIS wrote:
Folks,
still unclear after reading the hier man page where is the most suitable
node for a NFS server export directory.
Wherever you like? /export or /data are convenient choices. The rules
for export make separate filesystems the
In gmane.os.openbsd.misc, Atanas Vladimirov wrote:
On 21.04.2014 19:38, Atanas Vladimirov wrote:
Hi,
Sorry for the noise, but after the upgrade with the last snapshot all
traffic flows only on default queue.
Can you describe your environment in a little more detail?
Are you using pfsync or
Ok. Thanks for your time.
On 21.04.2014 23:46, Stuart Henderson wrote:
This is what I'm wondering, which is why I cc'd henning on my reply to
you -
my pf queue setup is in a place which is awkward for me to test at the
moment
so I can't check it myself yet.
On 2014/04/21 23:42, Atanas
On 20 Apr 2014, at 19:24, Henning Brauer lists-open...@bsws.de wrote:
* Andy Lemin a...@brandwatch.com [2014-04-09 00:14]:
For PF, I wouldn't recommend using anchors as I *think* their slower
where on earth are people getting this ridiculous ideas from?
Can't remember. Thanks for
Hello
Try slock -- http://tools.suckless.org/slock/
2014-04-22 1:51 GMT+11:00 Alessandro DE LAURENZIS just22@gmail.com:
...
Of course, any suitable alternatives would be welcome.
--
//Alex
Hello list,
[dmesg attached below]
I recently purchased a Thinkpad X61 tablet (manufactured circa
2006) and have not been able to get the stylus to work with the
screen in OpenBSD. It worked fine with the Windows 7 install that
came with it, so I know the hardware itself is fine.
From reading
On Mon, Apr 21, 2014, at 04:11 AM, Philip Guenther wrote:
On Sun, Apr 20, 2014 at 9:47 PM, Nex6|Bill n6gh...@yahoo.com wrote:
Kinda new to OpenBSD, (have a couple of 5.4 installs in VMs); whats the
standard for alias's? i added it to the .profile but some googling seems to
indicate that
On Sat, Apr 19, 2014 at 8:12 AM, Alan Corey alan01...@gmail.com wrote:
I just got a cheap USB WiFi adapter that I thought was a Realtek for
some reason, turned out to be Ralink. I was interested in small
because I want to mount it at the focal point of a TVRO satellite
dish. If I'd known it
On Mon, Apr 21, 2014 at 4:29 PM, Alessandro DE LAURENZIS
just22@gmail.com wrote:
Hello,
5.4-Rel here, GENERIC.MP kernel.
Rather often I need to connect my laptop to networks without DHCP service
(sometimes I use a direct connection through a crossover cable, too); so
it would be nice
On Mon, Apr 21, 2014 at 4:51 PM, Alessandro DE LAURENZIS
just22@gmail.com wrote:
Hello,
I google-ed a lot, but it seems that there is no trivial solution to
this point.
I extensively use console (and tmux), ending up with a lot of
simultaneously open shells; I normally suspend my
36 matches
Mail list logo