Re: Can't ping IPv6

On Wed, Sep 16, 2015 at 07:28:48AM +0200, Remi Locherer wrote: > Strange notation with "-". Never seen such an output from "routei show" or > "netstat -rn" command. > Guess it is a rdns. > You don't have a default route set for IPv6. > I second that :)

Soekris 4501 and OpenBSd 5.7

Hi there, just a simple question, is it possible to install a 5.7 on a soekris 4501? It seems when I try to load the bsd.rd ftom the tftp server the soekris isnt able to handle it. I redirected the console but it get stuck on the entry point msg. Regards Markus -- Markus Rosjatfon:

Re: Native EFI Bootloader Support

On 16 September 2015 at 00:39, YASUOKA Masahiko wrote: > > > Can you try > > http://yasuoka.net/~yasuoka/BOOTX64.EFI > > this and "machine test" on boot prompt? It will show > > 0 blocksize=512 > > like this. Disk number and blocksize. > Yup - that's what I get:

Re: Soekris 4501 and OpenBSd 5.7

> On Sep 16, 2015, at 00:40, Markus Rosjat wrote: > > Hi there, > > just a simple question, is it possible to install a 5.7 on a soekris 4501? I don't know about the 4501, but the 5501 works fine. Any chance you grabbed the 64 bit image by mistake? Devin

Re: Soekris 4501 and OpenBSd 5.7

4801 worked fine for me until it died (hardware failure) On Wed, Sep 16, 2015 at 8:35 AM, Devin Reade wrote: >> On Sep 16, 2015, at 00:40, Markus Rosjat wrote: >> >> Hi there, >> >> just a simple question, is it possible to install a 5.7 on a soekris 4501? > > I

Re: Soekris 4501 and OpenBSd 5.7

rosjat wrote: > stuck on the entry point msg. You need to create a boot.conf file with a couple of commands. Read this: http://www.openbsd.org/faq/faq6.html#PXE The contents of the file will likely need to be as follows: stty com0 115200 set tty com0 The default baud rate is 9600 --

Re: Sep 13 snapshot doesn't cleanly unmount / on reboot?

Darren Tucker [dtuc...@zip.com.au] wrote: > Hi all. > > I've got a pcengines APU running a recent snap (upgraded via bsd.rd), > and it doesn't seem to cleanly unmount the root filesystem on reboot, > always claiming "/mnt was not properly unmounted". Any ideas ideas why? > Sometime before 5.8

Re: Soekris 4501 and OpenBSd 5.7

On 2015-09-16, Devin Reade wrote: > I don't know about the 4501, but the 5501 works fine. Also, lunch was okay. Since we are talking about totally different things. -- Christian "naddy" Weisgerber na...@mips.inka.de

Re: Can't ping IPv6

Denis Fondras writes: > On Wed, Sep 16, 2015 at 07:28:48AM +0200, Remi Locherer wrote: >> Strange notation with "-". Never seen such an output from "routei show" or >> "netstat -rn" command. > > Guess it is a rdns. There is indeed one set. >> You don't have a default

Re: Soekris 4501 and OpenBSd 5.7

On 2015-09-16, Adam Jeanguenat wrote: > rosjat wrote: >> stuck on the entry point msg. > > You need to create a boot.conf file with a couple of commands. Read > this: > >http://www.openbsd.org/faq/faq6.html#PXE > > The contents of the file will likely need to be as follows: >

Re: Can't ping IPv6

Stuart Henderson writes: > On 2015-09-16, Mark Carroll wrote: >> Maybe there's a better way to specify default routes, but that one sure >> seems to work. > > The standard method is to add it to /etc/mygate. Aha! Of course, it looks like the installer

Re: Can't ping IPv6

On 2015-09-16, Mark Carroll wrote: > Maybe there's a better way to specify default routes, but that one sure > seems to work. The standard method is to add it to /etc/mygate.

Re: Can't ping IPv6

Em 16-09-2015 15:01, Mark Carroll escreveu: > Maybe there's a better way to specify default routes, but that one sure > seems to work. My CPE sometimes won't give me a default route through SLAAC. I'm not sure you're using it, but I presume you are. The only way I have to kind of assure a default

file sets and CVS tree

When I first install OpenBSD there is a phase where I choose file sets like base57.tgz which it then downloads and untars. Then for upgrades I can check out the CVS tree and build and install the patch branch or whatever. One thing that isn't yet clear to me is what one has to do with the other.

Re: file sets and CVS tree

On Wed, Sep 16, 2015 at 09:27:25PM +0100, Mark Carroll wrote: > When I first install OpenBSD there is a phase where I choose file sets > like base57.tgz which it then downloads and untars. Then for upgrades I > can check out the CVS tree and build and install the patch branch or > whatever. > >

Re: file sets and CVS tree

Josh Grosse writes: > The filesets are built when you make a release. See FAQ 5.4, and the > release(8) man page. Aha, thank you, that all makes sense. I should have also figured this from reading the last paragraph of http://www.openbsd.org/stable.html -- Mark

Re: file sets and CVS tree

On Wed, Sep 16, 2015 at 09:27:25PM +0100, Mark Carroll wrote: > When I first install OpenBSD there is a phase where I choose file sets > like base57.tgz which it then downloads and untars. Then for upgrades I > can check out the CVS tree and build and install the patch branch or > whatever. > >

Problems building BIND 9.10.3 on OpenBSD 5.7

Hello, I am currently having issues compiling BIND 9.10.3 (released by ISC this week to correct for DoS vulnerabilities), on my OpenBSD 5.7 test machine. I am running the OpenBSD 5.7 release build with the 14 errata patches successfully applied and with the userland also rebuilt. I can

Re: Problems building BIND 9.10.3 on OpenBSD 5.7

On Thu, Sep 17, 2015 at 02:03:01AM BST, Research wrote: > Hello, Hi, > I am currently having issues compiling BIND 9.10.3 (released by ISC > this week to correct for DoS vulnerabilities), on my OpenBSD 5.7 > test machine. I am running the OpenBSD 5.7 release build with the > 14 errata patches

Re: Sep 13 snapshot doesn't cleanly unmount / on reboot?

Darren Tucker [dtuc...@zip.com.au] wrote: > On Thu, Sep 17, 2015 at 1:48 AM, Chris Cappuccio wrote: > > > > Sometime before 5.8 release, a 4 second pause was removed from the shutdown > > path. This must have been giving your USB disk time to finish before the > > reset. > > >

Re: Sep 13 snapshot doesn't cleanly unmount / on reboot?

On Thu, Sep 17, 2015 at 1:48 AM, Chris Cappuccio wrote: > > Sometime before 5.8 release, a 4 second pause was removed from the shutdown > path. This must have been giving your USB disk time to finish before the > reset. > Interesting, was that in the rc scripts or the kernel?

Re: Soekris 4501 and OpenBSd 5.7

yeah basically :-P but the hint with the version of the image seems to be the right thing to check. I had the image laying arround since earlier this yeah when I set up a 6501 so this should be a 64bit image and if I remember right 4501 is only capable of 32bit. So I'll give it a try with a