Re: State of IPsec, iked (OpenIKED) and redundancy (CARP)

Hello Jasper, I wanted to use iked in a redundant configuration too and wasn't sure whether iked and sasyncd play nice together. I contacted Reyk Floeter (the main developer of iked) and it turns out there is room for improvement. We use OpenBSD for the Muniam managed firewalls and need

Re: W^X issues running valgrind

On Thu, Oct 6, 2016 at 12:50 PM, Andreas Kusalananda Kähäri wrote: > Hi, > > Let me know if this should be on ports rather than here. > > I'm following OpenBSD current on amd64, updating the system a couple of > times a week, and I'm using valgrind from ports to check a C

W^X issues running valgrind

Hi, Let me know if this should be on ports rather than here. I'm following OpenBSD current on amd64, updating the system a couple of times a week, and I'm using valgrind from ports to check a C program for memory leaks. However, since recently (sorry, can't specify closer, within the last

Re: APU2 Internal USB Headers Not Working

On 2016-10-06, Sam Vaughan wrote: > $ dmesg | egrep -i 'hci|hub|usb' Please don't trim things. Full dmesg, full pcidump (preferably -vxx). Or better, run sendbug as root which includes acpi tables in the mail it produces (the latter is not presently working in -current,

Re: Large datasize - how to limit physical memory?

On Wed, Oct 05, 2016 at 12:34:42PM -0400, Ted Unangst wrote: > If somebody writes a C program that demonstrates the problem, I'm happy to > take a look. I'm not installing erlang. It has been ages since I wrote a C program from scratch, but here goes: #include #include #include int main() {

Re: W^X issues running valgrind

On 2016/10/06 13:23, David Coppa wrote: > On Thu, Oct 6, 2016 at 12:50 PM, Andreas Kusalananda Kähäri > wrote: > > Hi, > > > > Let me know if this should be on ports rather than here. > > > > I'm following OpenBSD current on amd64, updating the system a couple of > > times

Re: W^X issues running valgrind

On Thu, Oct 06, 2016 at 12:57:43PM +0100, Stuart Henderson wrote: > On 2016/10/06 13:23, David Coppa wrote: > > On Thu, Oct 6, 2016 at 12:50 PM, Andreas Kusalananda Kähäri > > wrote: > > > Hi, > > > > > > Let me know if this should be on ports rather than here. > > > > > >

Re: netsnmpd Fails to Start on Current

On 2016-10-04, Theodore Wynnychenko wrote: > # /usr/local/sbin/snmpd -L e > kvm_openfiles: Operation not permitted > kvm_openfiles: /dev/mem: Operation not permitted Kernel virtual memory access is no longer permitted by the kernel on a normally running system. The relevant

Re: Booting BSD on a Libreboot system - documentation needed

On Thu, 6 Oct 2016 15:05:04 +1100 Aaron Mason wrote: > Holy frijole, just reading some of the responses from the some people > in GNU - I'm at the point where I'm not entirely convinced that GNU > isn't a cult, with Stallman as the high almighty leader. I am

Re: Booting BSD on a Libreboot system - documentation needed

Do any of you mind to drop the off topic, pretty please? it's a thread about booting BSD on hardware with the libreboot BIOS/UEFI. Not... whatever you are doing here. 2016-10-06 23:15 GMT+02:00 Gareth Nelson : > To be clear, it's not "the libreboot side" but rather "The

Re: Setting flags on /dev/audio

On 10/06/16 22:44, ludovic coues wrote: misc strip attachment. Please send your diff inline or start a new thread on dev Thanks forthe pointer Ludovic, sys/dev/audio.c: @@ -1537,6 +1537,11 @@ case FIONBIO: /* All handled in the upper FS layer. */ break; +case

Re: Booting BSD on a Libreboot system - documentation needed

Look. Please leave the drama off the lists. Any discussion against drama is also drama. Can my mail be the last on the topic please? People who have jumped onto this list from the outside without respecting our community are the most disrespectful of all. It should be all about code. If it

Re: Booting BSD on a Libreboot system - documentation needed

To be clear, it's not "the libreboot side" but rather "The Leah Rowe side" - to date she has not offered any evidence of her accusations. >From my viewpoint it seems VERY doubtful that the FSF would be bigoted towards trans people and i'm inclined not to believe the accusation. Leah: I also have

Re: SPARC64: input/output error on softraid 5 with more than 8 disks

On 2016-10-06 11:34, Kenneth Westerback wrote: 1) Why do you say >8 but only give an example using 10 disks? 2) fdisk and disklabels for all the disks you test would be useful, as would the verbatum output from newfs. 3) The size of the disks would also be useful (although the information

autoinstall (eg: disklabel -T) doesn't support templates that specify partition sizes in sectors?

Experimenting with autoinstall(8) and predefined partition layout templates, I was a little surprised to find that disklabel(8) apparently does not support specifying partition sizes givin in sectors, only in units (b,c,k,m,g,t) and/or percentages? Am I missing out on something obvious here? My

Re: tfdpd doesn't deliver pxeboot file

> On Oct 6, 2016, at 7:24 AM, Peer Janssen wrote: > > But I realized that there must be something in the dhcpd options and/or > something related to arp resolution, which I didn't grok. So I read some > more RFCs about pxebooting in relation to dhcp and arp, but finally > abandoned

Re: APU2 Internal USB Headers Not Working

> > $ dmesg | egrep -i 'hci|hub|usb' > > Please don't trim things. Full dmesg, full pcidump (preferably -vxx). > Or better, run sendbug as root which includes acpi tables in the mail > it produces (the latter is not presently working in -current, but since > you're running 6.0 you won't run into

use of divert-packet and table insertion

I need to use dns blacklisting on incoming email. Spamd caused a user revolt because of its unpredictable delay. smtpd maintainers have more urgent projects than working on filter-dnsbl. What I'd like to do is: in pf.conf pass in on ingress from to any port smtp pass in on

quirks "unsigned package," "Can't find CONTENTS"

I'm installing OpenBSD i386 on a fresh new hard drive, I've set PKG_PATH, and I can't add packages- my tries give errors about quirks. Trying a bare "pkg_add quirks" tells me: # pkg_add quirks Error from http://mirrors.mit.edu/pub/OpenBSD/6.0/packages/i386/quirks-2.241.tgz unsigned package Can't

Re: quirks "unsigned package," "Can't find CONTENTS"

>Your package path points to 6.0- release. But your error messages > indicate you've installed a snapshot of -current, the development > breach. Use snapshot packages, or install the release. Thanks! You're right, I had intended to install 6.0 from release, but ended up getting a snapshot ISO.

security(8) question - how to skip a single file?

I have RTFMed and googled, but I still can’t figure out how to do one simple thing: make security(8) ignore a single file that changes on a daily basis, where that file is otherwise monitored due to /etc/mtree/4.4BSD.dist. The file in question is /var/unbound/db/root.key, which I have

Re: serial input line not working [solved]

Am 22.09.2016 um 04:47 schrieb Philip Guenther: > Backing up to the beginning... > > On Wed, Sep 21, 2016 at 2:39 PM, Peer Janssen wrote: >> I updated an alix.3c3 box from OpenBSD 4.6 release to 6.0 release >> recently via bsd.rd install kernel. >> This went very smoothly, except

Re: tfdpd doesn't deliver pxeboot file

Am 29.09.2016 um 14:05 schrieb Stuart Henderson: > On 2016-09-28, Peer Janssen wrote: >> # tftpd -d /tftpboot >> >> tftpd: 192.168.0.81: read request for 'pxeboot' >> tftpd: 192.168.0.81: read request for 'pxeboot' >> tftpd: 192.168.0.81: read request for 'pxeboot' >> tftpd:

Re: OpenBSD 6.0 bsd.rd doesn't boot on soekris net4801 [wrap up]

Wrap-up: The net4801 is now working as expected. (Before reading his post,) I did exactly what Nick suggested. This worked well. Lesson learned: mixing bootloader and kernel from different releases doesn't necessarily work. Another lesson: An intuition told me that I might have had to sync

Re: security(8) question - how to skip a single file?

On Thu, Oct 06, 2016 at 08:17:02AM -0500, Adam Thompson wrote: > I have RTFMed and googled, but I still can???t figure out how to do one simple > thing: make security(8) ignore a single file that changes on a daily basis, > where that file is otherwise monitored due to /etc/mtree/4.4BSD.dist. > >

Re: Large datasize - how to limit physical memory?

Raimo Niskanen wrote: > On Wed, Oct 05, 2016 at 12:34:42PM -0400, Ted Unangst wrote: > > If somebody writes a C program that demonstrates the problem, I'm happy to > > take a look. I'm not installing erlang. > > It has been ages since I wrote a C program from scratch, but here goes: Thanks. That