I have a T1000, and it runs 6.9 in primary and 7 guests.
However, attempts to create and install a new ldom config result
in complete loss of the device tree, and consequent inability to boot.
restore to factory, and then restore the ldom config created with OBSD 6.3
will produce a working
Hi Masato,
Thanks for checking. I'm currently stuck with Workstation Pro 15.5.7
build-17171714.
It seems likely that it is an interaction between Workstation and some
changes between 6.8 and 6.9 that causes this regression. It's not clear
whose fault it is for this misbehavior. However, none
Tobias,
I replaced the OpenBSD with the same configuration:
-> % uname -r -p
6.9 amd64
Now, with this configuration:
ikev2 crypto-primary active esp \
from any to any \
peer 7.7.7.7 \
ikesa auth hmac-sha2-256 enc aes-256 prf hmac-sha2-256 group modp2048
\
childsa auth
On Wed, May 12, 2021 at 12:06:21PM +0300, Денис Давыдов wrote:
> I tried to specify an explicit parameter -T to disable NAT-Traversal
> auto-detection and use `local' parameter. Also according to your advice
> tried a configuration like this:
>
> ikev2 crypto-primary active esp \
> from any
Hello.
I'm trying to upgrade ports after upgrading os to 6.9, but I get a lot
of failures from various packages and I don't know how to approach them.
One of those packages is python-3.8.6p0 -> python-3.8.8p0.
>quirks-4.9 signed on 2021-05-11T16:31:32Z
>Can't install python-3.8.8p0 because of
I've also tried VMware Workstation 16 Player on Windows10 Pro and the
netowrk is working fine.
--
ASOU Masato
From: Masato Asou
Date: Wed, 12 May 2021 12:51:48 +0900 (JST)
> Hi Moritz,
>
> I upgraded with the following command on my OpenBSD 6.8 release, and
> the network is working fine.
>
>
I tried to specify an explicit parameter -T to disable NAT-Traversal
auto-detection and use `local' parameter. Also according to your advice
tried a configuration like this:
ikev2 crypto-primary active esp \
from any to any \
local 1.1.1.1 peer 7.7.7.7 \
ikesa auth hmac-sha2-256
Den ons 12 maj 2021 kl 11:29 skrev Артём Мазуров :
> Hello.
> I'm trying to upgrade ports after upgrading os to 6.9, but I get a lot
> >|library ssl.48.2 not found
> >| /usr/lib/libssl.so.48.1 (system): minor is too small
> >| /usr/lib/libssl.so.49.0 (system): bad major
This usually means the
I used to be able to install OpenBSD on a 1G disk (sets: -x* -g* -c*) and 256M
ram, but no more….now a 1280M disk + 384M ram is needed.
After a little sleuthing, the primary reason seems to be that the size of
/usr/share/relink/kernel/GENERIC/ has been growing:
Rel Size
Hi list,
I can't find in spamd(8) how to enable IPv6 listener in addition to IPv4 one.
Is it possible to set spamd(8) to listen on both IPv4 and IPv6?
Martin
Have you considered using a real computer?
Martin wrote:
> Hi Dave,
>
> Can you recommend any way to see online videos without shuttering? Modern
> CPUs can't smoothly play it in software emulation, unfortunately.
>
> Martin
>
> ‐‐‐ Original Message ‐‐‐
> On Wednesday, May 12, 2021
I am terribly sorry you aren't satisfied with what is possible in OpenBSD,
and will have to return to a Linux or Windows environment.
Martin wrote:
> Hi Theo,
>
> Sure, for online videos I'm using OpenBSD host with appropriate browser
> installed. Just wonder about VMM to move all
kernel-side code for X
Kent Watsen wrote:
> I used to be able to install OpenBSD on a 1G disk (sets: -x* -g* -c*) and
> 256M ram, but no more….now a 1280M disk + 384M ram is needed.
>
> After a little sleuthing, the primary reason seems to be that the size of
>
On Wed, May 12, 2021 at 06:06:14PM +, Martin wrote:
> Hi Dave,
>
> Can you recommend any way to see online videos without shuttering? Modern
> CPUs can't smoothly play it in software emulation, unfortunately.
>
pkg_add youtube-dl
pkg_add firefox (or chrome, etc)
What's the problem here?
Hi list,
Just wonder how to enable video acceleration on VMM guest's side (Debian) if it
was possible. Maybe PCIe passthru should be present for that purpose?
virtio_vmmci and vmm_clock kernel driver modules doesn't help.
Martin
Check the diff of release notes I guess
On Wed, May 12, 2021, 19:26 Kent Watsen wrote:
> I used to be able to install OpenBSD on a 1G disk (sets: -x* -g* -c*) and
> 256M ram, but no more….now a 1280M disk + 384M ram is needed.
>
> After a little sleuthing, the primary reason seems to be that
afaik spamd(8) does not support ipv6 (yet).
I also do not know if there is any ongoing effort for ipv6 to be added.
On 5/12/21 9:24 AM, Martin wrote:
Hi list,
I can't find in spamd(8) how to enable IPv6 listener in addition to IPv4 one.
Is it possible to set spamd(8) to listen on both IPv4
Have you considered using a real computer?
Martin wrote:
> Hi Theo,
>
> Sure, for online videos I'm using OpenBSD host with appropriate browser
> installed. Just wonder about VMM to move all 'potentially dangerous' things
> to a linux VM and remove any browsers from the host.
>
> Martin
>
Am Wed, May 12, 2021 at 09:46:28AM -0400 schrieb Aisha Tammy:
> afaik spamd(8) does not support ipv6 (yet).
> I also do not know if there is any ongoing effort for ipv6 to be added.
>
> On 5/12/21 9:24 AM, Martin wrote:
> > Hi list,
> >
> > I can't find in spamd(8) how to enable IPv6 listener in
Hi,
Do you mean packages upgrade by using command:
$ doas pkg_add -uvi ?
If yes, you can remove failed packages for upgrade and reinstall them manually
by the command:
$ doas pkg_add package_name
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 9:06 AM, Артём Мазуров
Hi,
Please consider to move to VirtualBox. No any problems with networking at all
on any host platform. Network works fine using OpenBSD VMM hypervisor too.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 9:48 AM, Moritz Grimm
wrote:
> Hi Masato,
>
> Thanks for checking.
Martin writes:
> Hi list,
>
> Just wonder how to enable video acceleration on VMM guest's side (Debian) if
> it was possible. Maybe PCIe passthru should be present for that purpose?
There is nothing to accelerate: vmd(8) doesn't emulate a display or
video device. vmm(4) doesn't support
Finally solved! Tried TS one after another. To put it mildly, I'm
surprised. it turns out that the equipment on the remote side is configured
in such a way that for each TS I had to set up a separate connection. This
configuration working fine now:
ikev2 crypto-primary active esp \
from
I just have to say this hatred and twisting of facts could be due to
my mindness promotion of our operating system.
I've hurt a lot of people. Jealousy is a m*.
--Murk
On Wed, May 12, 2021 at 8:09 PM Theo de Raadt wrote:
>
> Have you considered using a real computer?
>
> Martin wrote:
>
> >
Hi Dave,
Can you recommend any way to see online videos without shuttering? Modern CPUs
can't smoothly play it in software emulation, unfortunately.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 1:43 PM, Dave Voutila wrote:
> Martin writes:
>
> > Hi list,
> > Just wonder
Hi Peter,
Great book of PF. I've read it early in 2015, very useful.
Since last updates all the incoming connections to my mail servers are IPv6,
unfortunately. Just before the updates it was IPv4, so spamd has been used for
all the incoming connections outside whitelists of known peers. Works
Hi Theo,
Sure, for online videos I'm using OpenBSD host with appropriate browser
installed. Just wonder about VMM to move all 'potentially dangerous' things to
a linux VM and remove any browsers from the host.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:07 PM, Theo de
No Window'es or Linux'es on the hosts, just OpenBSD. Anyway, Debian works great
on VMM, except the question's topic thing. Thank you for your attention)
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:25 PM, Theo de Raadt wrote:
> I am terribly sorry you aren't satisfied
I use TigerVNC server on the Linux VM (Debian) plus dummy video driver and
compiled vmm kernel modules for clock in sync and network...
https://github.com/voutilad/virtio_vmmci
https://github.com/voutilad/vmm_clock
On the OpenBSD host TigerVNC viewer has been installed.
Works absolutely
* mindless
On Wed, May 12, 2021 at 11:30 PM BergenBergen BergenBergen
wrote:
>
> I just have to say this hatred and twisting of facts could be due to
> my mindness promotion of our operating system.
>
> I've hurt a lot of people. Jealousy is a m*.
>
> --Murk
>
>
>
> On Wed, May 12, 2021 at 8:09
Hi Mike,
Did it already as you replied.
Thanks.
Martin
‐‐‐ Original Message ‐‐‐
On Wednesday, May 12, 2021 6:20 PM, Mike Larkin wrote:
> On Wed, May 12, 2021 at 06:06:14PM +, Martin wrote:
>
> > Hi Dave,
> > Can you recommend any way to see online videos without shuttering?
> 12. mai 2021 kl. 15:24 skrev Martin :
>
> Hi list,
>
> I can't find in spamd(8) how to enable IPv6 listener in addition to IPv4 one.
>
> Is it possible to set spamd(8) to listen on both IPv4 and IPv6?
Unfortunately spamd is IPv4 only.
Back in the day (2014ish?, about the time I was
Hello
Im on 6.9 release amd64. Switched to clang and lldb since gcc and gdb are not
in base anymore. My problem is during debugging for some functions
command "next/step-over" behaves like "step/step-in".
example code (just for illustration purpose):
#include
#include
int main()
{
int
I think there are ways to get what you want w/o VMM, such as a
combination of regular X, separate user accounts for different
activities, ssh -X/-Y, and rarely, xhost. Email me off-list if you want
details; I have described them here at least somewhat, in the past.
(Also given the fact that
34 matches
Mail list logo
