Don't use Adaptec RAID (aac). I does not work.
Works fine for me in 3.5 using dell perc 3/Di (aac). Has the driver
regressed any in 3.7?
Brad.
_
SEEK: Over 80,000 jobs across all industries at Australia's #1 job site.
On Tue, Jun 21, 2005 at 06:23:20AM -0600, Bob Beck wrote:
I'll be hiding in the back, wearing nothing but a Speedo, it's really really
warm here. Yeah for global warming!
Wim hanging out in a speedo? Darn. Where's my frequent flyer miles.
If I'm quick I can bring my speedo and hang
Many helpful people wrote:
[snip]
Thanks to all for so many replies :-)
You have convinced me that relying only on Sender/Recipient is really a
bad idea. I will try the mentioned patch(es) that whitelist a complete
/24 subnet.
Regards,
Heinrich
--On 21 June 2005 20:02 -0600, Steve Williams wrote:
What is the best way to add entries from greylisting.org to my
spamd-white table?
Personally I've been keeping them separate, e.g.
table spamd persist
table spamd-white persist
table spamd-nogrey persist file /etc/spamd-nogrey
rdr proto
Ray Percival wrote:
Trying to track -stable according to the FAQ I'm doing the following.
setenv [EMAIL PROTECTED]:/cvs #Which seems to take and
the following cvs commands work and the fingerprints match.
Then
cvs up -rOPENBSD_3_7 -Pd
? archivers/w-cabextract-1.1
?
Our LAN is connected to the Internet with Proxy gateway. Access is authorized
and requires following communication scheme:
USER proxy-account-username
PASS proxy-account-password
USER [EMAIL PROTECTED]
PASS remote-ftp-server-password
Both proxy server and gateway are using this scheme, they
Is there someone who has a working dual monitor matrox X11 configuration?
+++chefren
Hi all,
I'm working with a firewall running OpenBSD with isakmpd. When I want to
connect 2 or more firewalls, I can see the tunnels via: netstat -rn | grep
encap but the only way to begin the real communication is starting it by one
of the sides. If a try to begin with the other side it
On Wed, Jun 22, 2005 at 01:29:26PM +0200, chefren wrote:
Is there someone who has a working dual monitor matrox X11 configuration?
yes.
Nick.
On Wed, Jun 22, 2005 at 06:43:36AM -0400, Nick Holland wrote:
Ray Percival wrote:
Trying to track -stable according to the FAQ I'm doing the following.
setenv [EMAIL PROTECTED]:/cvs #Which seems to take
and
the following cvs commands work and the fingerprints match.
Then
cvs up
--On 22 June 2005 09:03 -0400, Vivek Ayer wrote:
Once I enable pf with the given ruleset, I can't all of a sudden ping
to domains.
PF is doing exactly what you told it ...
priv_nets = { 127.0.0.0/8, 192.168.0.0/16, 10.0.0.0/8 }
[...]
block drop in quick on $ext_if from $priv_nets to any
On Wed, Jun 22, 2005 at 02:01:43PM +0200, Abel Talaversn Estevez wrote:
Is it normal? Can I solve it with a parameter like Retransmit or Timeout?
I know that it happens something similar with D-Link Firewalls.
need configs to answer accurately, please.
shouldn't need to dinker with
The OP was trying to compile it on amd64, which it won't work on.
You're using it on i386, which it *sort of* works on. But it was
removed from the GENERIC kernel for i386 right before 3.7 was tagged,
and if there has been any work done to the kernel which might have
broken aac, no one would know
El Miircoles, 22 de Junio de 2005 15:33, jared r r spiegel escribis:
On Wed, Jun 22, 2005 at 02:01:43PM +0200, Abel Talaversn Estevez wrote:
Is it normal? Can I solve it with a parameter like Retransmit or
Timeout? I know that it happens something similar with D-Link
Firewalls.
need
At 01:08 PM 6/22/2005 +0200, Dunric wrote:
Our LAN is connected to the Internet with Proxy gateway. Access is
authorized and requires following communication scheme:
USER proxy-account-username
PASS proxy-account-password
USER [EMAIL PROTECTED]
PASS remote-ftp-server-password
Both proxy
Hello!
I'm trying to deliver a mail (a bug report) from source IP
212.227.35.69
and seem to not get it through.
Some time earlier I had the same problem, and even after many retries
(i.e. after more time than the greylisting timeout should be) it didn't
get through.
What's wrong?
Is that IP
Running 3.7-current, I get the following behaviour with audioctl
mixerctl.
% audioctl play.sample_rate=11025
audioctl: set failed: Invalid argument
% mixerctl -w record.mic=100
record.mic: 0 - 0
Also, if I try to record through a mic or line in, I get scrambled
noise. My sound card is driven
Hello!
On Wed, Jun 22, 2005 at 05:56:45PM +0200, Hannah Schroeter wrote:
Hello!
I'm trying to deliver a mail (a bug report) from source IP
212.227.35.69
and seem to not get it through.
Some time earlier I had the same problem, and even after many retries
(i.e. after more time than the
hi,
i am trying to aggregate a few transit providers into a device that
can't handle the full feeds from them. to get around that i am getting
the full feeds into an obsd 3.7 machine and then setting up a session
to reflect the finalized table to the device. instead of having 3 full
feeds it has
Pozdrav !!!
\
Ponudicu Vam dva nacina da dodjete do novca na 100% legalan i proveren nacin.
Napomenucu Vam samo da MORATE da se pridrzavate uputstva i pravila kako Vam
uspeh ne bi izostao. Licno ja radim oba posla isovremeno ( ne vidim razlog
zasto ne biste i Vi ) i rezultati su vise nego
Does showmount -e against that nfs server show nfs version 2 as an
allowable service?
-Blake
-Original Message-
From: Rene Rivera [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 22, 2005 10:46 AM
To: misc@openbsd.org
Subject: NFS Protocol not supported when mounting from a Linux
On Wed, Jun 22, 2005 at 12:59:35AM +0100, Ed Wandasiewicz wrote:
Running 3.7-current, I get the following behaviour with audioctl
mixerctl.
% audioctl play.sample_rate=11025
audioctl: set failed: Invalid argument
% mixerctl -w record.mic=100
record.mic: 0 - 0
I see the same thing with
On Jun 22 12:46 PM, Rene Rivera wrote:
I'm trying to NFS mount from a Linux machine to my new OpenBSD setup and
it just doesn't work. I've run out of things to try, and I keep getting
the Protocol not supported error. Trying to force the NFS version:
mount_nfs -2 x.x.x.x:/mnt/export
anyone know what happened to the w32codecs in the ports tree?
I'm using 3.7-STABLE and see this:
cirque$ cd ./graphics/win32-codecs
cirque$ sudo make
Password:
=== Checking files for win32-codecs-20050216
all-20050216.tar.bz2 doesn't seem to exist on this system.
Attempting to fetch
If it is an upper layer protocol that is using up all of the pf
states, can rules be created automatically that would block
individuals from doing this, or do I have to manually create a rule?
PLease let me know.
Thanks,
Aaron
iProvo Network Engineer
On 6/18/05, tony sarendal [EMAIL PROTECTED]
anyone know what happened to the w32codecs in the ports tree?
I'm using 3.7-STABLE and see this:
cirque$ cd ./graphics/win32-codecs
cirque$ sudo make
Password:
=== Checking files for win32-codecs-20050216
all-20050216.tar.bz2 doesn't seem to exist on this system.
Looks like the port needs
Hello,
I have been running BSD on a desktop machine for 3 months and I would like
to install OpenBSD on my test server. My test box is a P500 with 128MB of
RAM and three disk drives.
I would like to use 100% of the storage space on all three drives while
installing / on wd0, /swap on wd1,
On Wed, Jun 22, 2005 at 03:38:14PM -0500, eric wrote:
On Wed, 2005-06-22 at 15:15:21 -0500, Steve Tornio proclaimed...
Looks like the port needs to be updated. The filename currently offered is
all-20050412.tar.bz2. It doesn't look like mplayer keeps the older codecs
around.
Yep,
At 02:04 PM 6/22/2005 -0500, Gabe Johanns wrote:
Hello,
I have been running BSD on a desktop machine for 3 months and I would like
to install OpenBSD on my test server. My test box is a P500 with 128MB of
RAM and three disk drives.
I would like to use 100% of the storage space on all three
Hello,
I'd like to offer a public OpenBSD CVS mirror, but I have no experience
with setting up CVS servers, especially public ones.
My question may sound obvious: how to set up a read-only CVS server, using
the reference CVS or OpenCVS?
I found various tutorials and scripts, but
On Wed, 22 Jun 2005, L. V. Lammert wrote:
At 02:04 PM 6/22/2005 -0500, Gabe Johanns wrote:
Hello,
I have been running BSD on a desktop machine for 3 months and I would like
to install OpenBSD on my test server. My test box is a P500 with 128MB of
RAM and three disk drives.
I
Did you even READ the fine vnconfig man page?
diana
isakmpd.conf on one side:
...
[Phase 2]
-Connections= IPsec-clients,CONN-VPNPrueba2
+Passive-connections= IPsec-clients,CONN-VPNPrueba2
Try making this one change the isakmpd.conf on the VPN-peer
that the clients will be connecting to.
Mark T. Uemura
OpenBSD Support Japan Inc.
On Wed, Jun 22, 2005 at 11:33:15PM +0200, Frank Denis (Jedi/Sector One) wrote:
I'd like to offer a public OpenBSD CVS mirror, [...]
http://www.openbsd.org/anoncvs.html#MIRROR
http://www.openbsd.org/anoncvs.shar
On Wed, Jun 22, 2005 at 11:33:15PM +0200, Frank Denis (Jedi/Sector One) wrote:
Hello,
I'd like to offer a public OpenBSD CVS mirror, but I have no experience
with setting up CVS servers, especially public ones.
My question may sound obvious: how to set up a read-only CVS server,
On Wed, Jun 22, 2005 at 04:15:19PM +0200, Abel Talaversn Estevez wrote:
[General]
Exchange-max-time= 30
Check-interval= 30
DPD_check_interval= 30
if you're certain those are what you need to use for
one reason or another, then you need to use them :), but
I've been trying
On Wed, Jun 22, 2005 at 06:11:58PM +0200, Hannah Schroeter wrote:
Perhaps it'd be an improvement to spamd to report to the client on how
it got decided to block or greylist the IP, as that can come quite handy
if debugging is needed (i.e. legitimate mail doesn't get through even
after the
Can anyone point me in the right direction to get flash working with
firefox? I notice there is a nsplugin.so in ports/graphics/flash.
Would this work for firefox or would it work with netscape?
On Wed, Jun 22, 2005 at 11:39:26PM +0100, Ed Wandasiewicz wrote:
Following the faq, here is my output. Using /dev/audio and sox, I get
scrambled noise. The bytes/sec dont match...
# dd if=/dev/audio of=myvoice.raw
289+0 records in
289+0 records out
147968 bytes transferred in 4.636 secs
On Wed, Jun 22, 2005 at 11:33:15PM +0200, Frank Denis (Jedi/Sector One) wrote:
Hello,
I'd like to offer a public OpenBSD CVS mirror, but I have no experience
with setting up CVS servers, especially public ones.
My question may sound obvious: how to set up a read-only CVS server,
If you for some reason need a working flash player in a browser, use
opera and macromedia's Linux flash plug-in.
get these packages from your neighborhood mirror
redhat_base*
redhat_motif*
next install ports/www/opera (no package)
Hi,
We've been testing a squid proxy at my workplace (~300 machines
locally) on a smaller group of 60 machines. (used the Windows'
autodetect proxy thing with some javascript on a local webserver to
get get our 'volunteers')
Our new machine arrived which will be replacing this test unit. P4, 3.4
On Wed, 22 Jun 2005 19:35:37 -0500
Gordon Grieder [EMAIL PROTECTED] wrote:
Hi,
We've been testing a squid proxy at my workplace (~300 machines
locally) on a smaller group of 60 machines. (used the Windows'
autodetect proxy thing with some javascript on a local webserver to
get get our
On Wed, Jun 22, 2005 at 11:33:07PM +0200, Otto Moerbeek wrote:
I'd have to check to know for sure, but I think having a swap
partition on the root disk is mandatory. But you can always add extra
swap partitions later.
i got away with installing a full-disk / when i was doing a
soekris
On Mon, 20 Jun 2005, Ray Percival wrote:
I think the problem is that /dev/sound is
lrwx-- 1 root wheel 6 Jun 19 14:29 /dev/sound - sound0 and for some
reason wont let me change the perms on it.
it's a symlinks, permissions for it are irrelevant. (that's why you can't
change them)
During high utilization, the number of output errors on the pppoe
interface rises rapidly (several per second). I put the interface in
debug mode and examined /var/logs/messages, but could not find anything
of apparent interest. The following is relevant output of netstat -in:
NameMtu
Neta wrote:
Hello All,
I have some strange with NIC Dlink DFE 528TX, dmesg recognize it as
rl0 and ifconfig mark this interface ACTIVE, but if I ping on it
replied with ping: send to : Host is down
Anybody have a clue?
Any incompatibility with this one?
Kind regards
neta
kinda hard to
Otto Moerbeek wrote:
On Wed, 22 Jun 2005, L. V. Lammert wrote:
At 02:04 PM 6/22/2005 -0500, Gabe Johanns wrote:
Hello,
I have been running BSD on a desktop machine for 3 months and I would like
to install OpenBSD on my test server. My test box is a P500 with 128MB of
RAM and three
Thx for the reply but unfortunately it don't work.
In case of ftp-gateway, ftp client initiates with command PASSERVE our
gateway don't know and breaks the connection.
In case of ftp-proxy, which works only in non-interactive mode(autofetch),
attempt fails with ftp: Error retrieving file.
jared r r spiegel wrote:
this probably doesn't matter, but what if you just change the
options to be a simple (rw) or (ro)? perhaps those options
only apply on the server side and are therefore not communicated
over to the 192.168.0.3 client, but .. ?
Tried it, doesn't help :-(
any
Yes, I did 'make search' in /usr/ports.
And now I ask about your experiences: which one is recommended,
respectively not so suitable for a smaller server directly connected to
the Internet ?
Thanks for any comment,
Uwe
On 6/23/05, Nick Holland [EMAIL PROTECTED] wrote:
kinda hard to tell, since you didn't include the dmesg. Or the ifconfig
output. Or the ping command you were using.
However, you are misinterpreting messages. host is down means
whatever you were trying to ping couldn't be reached, and
52 matches
Mail list logo
