XDM spoils consoles.
Dell Inspiron 1150, starting X via xdm makes consoles unusable - shows kind of blinking color map... Probably somebody already had this problem? Would be nice to use both x and consoles at the same time :) Graphics: Intel 852GMV... Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
Re: XDM spoils consoles.
On Mon, 15 Aug 2005 00:39:14 -0700 (PDT) Vladislav Belogrudov [EMAIL PROTECTED] wrote: Dell Inspiron 1150, starting X via xdm makes consoles unusable - Do you have the same problem with other login managers? Or just XDM? snip Cheers, Jasper -- Security is decided by quality -- Theo de Raadt
Re: XDM spoils consoles.
On Mon, 15 Aug 2005 00:39:14 -0700, Vladislav Belogrudov wrote: starting X via xdm makes consoles unusable - shows kind of blinking color map... Does it start X properly when you startx from a console without any X running ?
Re: NAT doesn't appear to work for some websites
Matt Garman wrote: I have a number of websites that I cannot load from machines connected to the 'net through my OpenBSD firewall/NAT box. One such site is directron.com. Using Mozilla Firefox, it will just say Waiting for directron.com... but the page never loads. There are several other pages I've tried to load with the same result. On the other hand, some pages load fine (such as openbsd.org). However, if I login to the firewall (the openbsd box), I can use links to connect to these sites without any problem. I'm guessing that this has something to do with redirects on the target website. I'm pretty sure that directon.com is actually an alias for some other URL. I'm thinking that the pf ruleset on the OBSD box is not allowing this. I'm using the pf example from the OpenBSD FAQ: http://openbsd.org/faq/pf/example1.html Has anyone else seen this before? Thanks for any suggestions, Matt Hello, just an idea, are you connected to the internet via pppoe (DSL). There is a well-known problem with mtu/mss (1500/1460 vs. 1492/1452) You can use scrub in your pf.conf to solve it. something like scrub out on ppp0 all max-mss 1452 -- Mit freundlichen Gr|_en, Guido Tschakert _ SRC Security Research Consulting GmbH Graurheindorfer Str. 149 a Tel: +49-228-2806-138 53117 Bonn Fax: +49-228-2806-199 http://www.src-gmbh.de Mob: +49-160-3671422
Re: NAT doesn't appear to work for some websites
Hello, just an idea, are you connected to the internet via pppoe (DSL). There is a well-known problem with mtu/mss (1500/1460 vs. 1492/1452) You can use scrub in your pf.conf to solve it. something like scrub out on ppp0 all max-mss 1452 Or do a set mtu max 1492 In ppp.conf Greets, Jonathan -- Jonathan Weiss http://blog.innerewut.de
Update Information - Verification Required
[IMAGE] Dear Wells Fargo customer, As you may already know, we at Wells Fargo guarantee your online security and partner with you to prevent fraud. Due to the newly introduced Comprehensive Quarterly Updates Program (which is meant to help you against identity theft, monitor your credit and correct any possible errors), we urge you to go through the 2 steps Wells Fargo Account Confirmation process. The operation involves logging in and confirming your identity over a secure connection at: http://www.wellsfargo.com/confirmation/update/signon?SIGNONXCP=1010 After completing the operation, you will be informed whether or not your account has been confirmed with Comprehensive Quarterly. Thank you for working with us in combating online fraud and also, for choosing Wells Fargo as your Financial Institution. When you use Wells Fargo Online . or Wells Fargo Business Online . Banking, e guarantee that you will be covered 100% for any funds improperly removed from your Wells Fargo accounts, while we are handling your transactions, subject to your responsibility, described below. Brokerage accounts offered through Wells Fargo Investments, LLC (member SIPC), a non-bank affiliate of Wells Fargo Company. ) 1999 - 2005 Wells Fargo Bank. All rights reserved.
Re: NAT doesn't appear to work for some websites
Jonathan Weiss wrote: Hello, just an idea, are you connected to the internet via pppoe (DSL). There is a well-known problem with mtu/mss (1500/1460 vs. 1492/1452) You can use scrub in your pf.conf to solve it. something like scrub out on ppp0 all max-mss 1452 Or do a set mtu max 1492 In ppp.conf or set it in your hostname.if file if you are using a DSL router. I've seen this kind of problem in places where the link had a smaller MTU than the default. Sites which expect you to send a lot of data to them tend to just hang, waiting for the rest of the packet. Nick.
Re: ntpd could not parse pool.ntp.org
I checked the file you said and is correct. I think the problem is what you said because if I do a ping and a messages appears saying ping: unknow host http://www.openbsd.org; Perhaps giving the maximun info will understand better what I want to do. I installed OpenBSD 3.7 I have a router at home and want to put a firewall between the router and the lan I have at home. The gateway (on the router is 192.168.0.1) The OpenBSD firewall I installed has 2 nerwork cards - 192.168.0.3 - 192.169.1.9 Like the man afterboot says I enabled in /etc/sysctl.conf: net.inet.ip.forwarding=1 But seems not to work, because the machines in the intranet (my wife machines has the IP 192.168.1.20 for example) can t exit to Internet For to verify network interface configuration like the man afterboot says i did ifconfig -a for to see if the network interfaces are properly configured I paste the info: lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 33224 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:50:ba:be:09:35 media: Ethernet autoselect (100base TX full-duplex) status: active inet 192.168.1.3 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::250:baff:febe:935%rl0 prefixlen 64 scopeid 0x1 rl1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:60:67:75:ae:e7 media: Ethernet autoselect (10baseT) status: active inet 192.168.0.9 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::260:67ff:fe75:aee7%rl1 prefixlen 64 scopeid 0x2 pf log0: flags=0 mtu 33224 pf sync0: flags=0 mtu 2020 enc0: flags=0 mtu 1536 I m lost after that point, because I think the network cards are ok plus I enabled in /etc/sysctl.conf: net.inet.ip.forwarding=1 Thanks, Mike Chris Kuethe escribis: On 8/14/05, Mike Henker [EMAIL PROTECTED] wrote: Hi Chris, exactly what s the name of the file where I must to look? Salutes, Mike /etc/ntp.conf as an aside, you do have working name resolution on that machine, right? can you ping things by name? does lynx http://www.openbsd.org/; work? CK
[OpenBSD 3.7] Zaptel/wcfxo module Asterisk
Hi, Currently i'm trying to compile the zaptel drivers under OpenBSD 3.7 for the X100P Clone card.I've already got an loading zaptel module, using zaptel- freebsd-0.8 and the OpenBSD makefile from 0.9: # gmake -f Makefile.openbsd cc -D_KERNEL -I/sys -o gendigits gendigits.c -lm ./gendigits cc -D_KERNEL -I/sys -c -o zaptel.o zaptel.c ld -r -o mod_zaptel.o zaptel.o # gmake -f Makefile.openbsd load modload -o mod_zaptel -emod_zaptel mod_zaptel.o Module loaded as ID 0 Aug 15 13:33:07 division /bsd: Zapata Telephony Interface Registered on major 196 Aug 15 13:33:07 division /bsd: Zapata Telephony Interface Registered on major 196 Aug 15 13:33:07 division /bsd: DDB symbols added: 246832 bytes Aug 15 13:33:07 division /bsd: DDB symbols added: 246832 bytes Now I want to compile the wcfxo module, when I used the version from Freebsd I got alot compile errors. So I tried the netbsd-20050404 wcfxo version, still some compile errors but not so many: # cc -D_KERNEL -I/sys -I/usr/include -I/usr/src/sys/arch/ -I../zaptel -g -c - o wcfxo.o wcfxo.c wcfxo.c:38: error: syntax error before numeric constant In file included from ../zaptel/zaptel.h:37, from wcfxo.c:55: ../zaptel/os.h:78: warning: `struct stat' declared inside parameter list ../zaptel/os.h:78: warning: its scope is only this definition or declaration, which is probably not what you want wcfxo.c:105: error: syntax error before sizeof wcfxo.c:106: error: `wcfxo_match' redeclared as different kind of symbol wcfxo.c:68: error: previous declaration of `wcfxo_match' wcfxo.c:106: error: `wcfxo_attach' redeclared as different kind of symbol wcfxo.c:69: error: previous declaration of `wcfxo_attach' wcfxo.c:106: error: `wcfxo_detach' redeclared as different kind of symbol wcfxo.c:70: error: previous declaration of `wcfxo_detach' wcfxo.c:106: error: syntax error before numeric constant wcfxo.c:129: error: `wcfxo_match' redeclared as different kind of symbol wcfxo.c:106: error: previous declaration of `wcfxo_match' wcfxo.c:705: error: `wcfxo_attach' redeclared as different kind of symbol wcfxo.c:106: error: previous declaration of `wcfxo_attach' wcfxo.c: In function `wcfxo_attach': wcfxo.c:755: error: too few arguments to function `pci_mapreg_map' wcfxo.c:777: error: too few arguments to function `pci_intr_establish' wcfxo.c: At top level: wcfxo.c:849: error: `wcfxo_detach' redeclared as different kind of symbol wcfxo.c:106: error: previous declaration of `wcfxo_detach' wcfxo.c:69: warning: `wcfxo_attach' used but never defined wcfxo.c:70: warning: `wcfxo_detach' used but never defined Is there a way to make the wcfxo module working? THanks for the help. Rene The Netherlands http://www.portaone.com/~sobomax/zaptel-freebsd-0.8.tar.gz http://www.tastylime.net/netbsd/zaptel/zaptel-netbsd-20050404.tar.bz2
Kernel PPPoE is dieing...
Hi List, I4m using OpenBBSD 3.7 as a (basicly) web, mail and gateway server. I have 2 network devices, one for DSL connection and other to my localnet. Ok.. When i turn my server on, it get all up and running automaticly, including the ADSL connection. It connects to my ADSL service, authenticates correctly, and get working.. Very nice, fast... This is part of the log: --- Aug 14 22:14:42 noronha /bsd: pppoe0: phase establish Aug 14 22:14:42 noronha /bsd: pppoe0: phase authenticate Aug 14 22:14:42 noronha /bsd: pppoe0: phase network --- But some days after, the connection dies, and it don4t restart alone, so that my server stays down until i restart it. The log show: --- Aug 14 21:54:48 noronha /bsd: pppoe0: phase dead --- When the server is up, and runnig connected, the 4ifconfig pppoe04 show my internet IP, etc. When the connection dies, the ip is 0.0.0.0 (of course) and i noticed that the retry number commonly is 10. So i think the connection is dieing 10 times, and then it do not restart. The question is: 4How do i set retry number to infinite, so that it always restart the connection as soon as it deads??4 Sorry the long text for the simple question, i didn4t wanted to leave any doubts.. =D Sooo... Thanks to all for reading... Felipe M. Oliveira
Re: Kernel PPPoE is dieing...
If it always dies after a set number of days, maybe you can issue a command from cron to either restart the connection or reboot the pc automatically? -Original Message- From: Felipe Mesquita [mailto:[EMAIL PROTECTED] Sent: 15 August 2005 02:19 PM To: [EMAIL PROTECTED] Cc: misc@openbsd.org Subject: Kernel PPPoE is dieing... Hi List, I4m using OpenBBSD 3.7 as a (basicly) web, mail and gateway server. I have 2 network devices, one for DSL connection and other to my localnet. Ok.. When i turn my server on, it get all up and running automaticly, including the ADSL connection. It connects to my ADSL service, authenticates correctly, and get working.. Very nice, fast... This is part of the log: --- Aug 14 22:14:42 noronha /bsd: pppoe0: phase establish Aug 14 22:14:42 noronha /bsd: pppoe0: phase authenticate Aug 14 22:14:42 noronha /bsd: pppoe0: phase network --- But some days after, the connection dies, and it don4t restart alone, so that my server stays down until i restart it. The log show: --- Aug 14 21:54:48 noronha /bsd: pppoe0: phase dead --- When the server is up, and runnig connected, the 4ifconfig pppoe04 show my internet IP, etc. When the connection dies, the ip is 0.0.0.0 (of course) and i noticed that the retry number commonly is 10. So i think the connection is dieing 10 times, and then it do not restart. The question is: 4How do i set retry number to infinite, so that it always restart the connection as soon as it deads??4 Sorry the long text for the simple question, i didn4t wanted to leave any doubts.. =D Sooo... Thanks to all for reading... Felipe M. Oliveira [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
[OpenBSD 3.7-Release] D-Link DWL G630 and Netgear WG 511T
My laptop's wireless network driver is Atheros (ath 4) is detected in boot time (netstat -A). I bought a D-Link DWL G630 card which is (obviously) not detected by OBSD. All the other Netgear cards that are listed in [ath 4] are not available here. The only other card I can find is Netgear WG 511T but I googled read some reviews and saw that people are having problem with this card as well. Is D-Link DWL G 630 detected by Current or will it ever be detected in OBSD? Anyone else is having problem with Netgear WG 511T? Thanks.
Re: [OpenBSD 3.7-Release] D-Link DWL G630 and Netgear WG 511T
On Mon, Aug 15, 2005 at 10:53:30PM +1000, Z L wrote: My laptop's wireless network driver is Atheros (ath 4) is detected in boot time (netstat -A). I bought a D-Link DWL G630 card which is (obviously) not detected by OBSD. All the other Netgear cards that are listed in [ath 4] are not available here. dmesg? reyk
Re: [OpenBSD 3.7] D-Link DWL G630 and Netgear WG 511T (dmesg + ifconfig -A)
dmesg? OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz (GenuineIntel 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID real mem = 468688896 (457704K) avail mem = 420716544 (410856K) using 4278 buffers containing 23535616 bytes (22984K) of memory User Kernel Config UKC disable pcibios 254 pcibios0 disabled UKC exit Continuing... mainbus0 (root) bios0 at mainbus0: AT/286+(7f) BIOS, date 01/16/04, BIOS32 rev. 0 @ 0xfd700 pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc/0xf000 0xd/0x6000! 0xd6000/0x800! 0xd8000/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 vendor ATI, unknown product 0x5831 rev 0x02 ppb0 at pci0 dev 1 function 0 ATI Radeon IGP 9100 AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 ATI Radeon Mobility IGP 9100 rev 0x00 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ohci0 at pci0 dev 19 function 0 vendor ATI, unknown product 0x4347 rev 0x01: irq 11, version 1.0, legacy support ohci0: SMM does not respond, resetting usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1 vendor ATI, unknown product 0x4348 rev 0x01: irq 11, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 2 vendor ATI, unknown product 0x4345 rev 0x01: irq 11 ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: single transaction translator uhub2: 6 ports with 6 removable, self powered vendor ATI, unknown product 0x4353 (class serial bus subclass SMBus, rev 0x17) at pci0 dev 20 function 0 not configured pciide0 at pci0 dev 20 function 1 vendor ATI, unknown product 0x4349 rev 0x00: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: HITACHI_DK23FA-60 wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: TOSHIBA, DVD-ROM SD-R6112, 1031 SCSI0 5/cdrom removable pcib0 at pci0 dev 20 function 3 vendor ATI, unknown product 0x434c rev 0x00 ppb1 at pci0 dev 20 function 4 vendor ATI, unknown product 0x4342 rev 0x00 pci2 at ppb1 bus 2 Texas Instruments TSB43AB21 FireWire rev 0x00 at pci2 dev 0 function 0 not configured ath0 at pci2 dev 2 function 0 Atheros AR5212 rev 0x01: irq 11 ath0: mac 80.6 phy 4.1 radio 1.7 2.3, 802.11a/b/g, WOR4W, address 00:90:96:72:4d:f1 gpio at ath0 not configured rl0 at pci2 dev 3 function 0 Realtek 8139 rev 0x10: irq 11 address 00:02:3f:d3:3a:7b rlphy0 at rl0 phy 0: RTL internal phy cbb0 at pci2 dev 4 function 0 ENE CB-1410 CardBus rev 0x01pci_intr_map: no mapping for pin A : couldn't map interrupt vendor ATI, unknown product 0x4341 (class multimedia subclass audio, rev 0x00) at pci0 dev 20 function 5 not configured vendor ATI, unknown product 0x434d (class communications subclass modem, rev 0x01) at pci0 dev 20 function 6 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask ef75 netmask ef75 ttymask fff7 pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: vendor 0x062a product 0x0001, rev 1.10/0.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse1 at ums0 mux 0 --- ifconfig -A lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 33224 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 ath0: flags=8822BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST mtu 1500 address: 00:90:96:72:4d:f1 ieee80211: nwid media: IEEE802.11 autoselect status: no network rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:02:3f:d3:3a:7b media: Ethernet autoselect (none) status: no carrier inet 192.168.0.1 netmask
Sane mtu and mrru settings for ppp
Could anyone drop kick me in the direction of more documentation on sane settings for mtu and mrru in ppp? Also, if you know of any more docs that discuss the advantages and disadvantages of using hardware vs. software flow control on a regular modem. I know the AT commands but I'm not too sure how they affect the resulting connection. And yes, I really am attached to the internet by the technical equivalent of an old shoe string and a pair of tin cans... ;-) Thanks, JCR
eap driver audioctl issue
Hello OpenBSD fans. I am newbie to OpenBSD but have certain Linux and FreeBSD experience. I am having trouble with my audio Ensoniq CT5880 card under OpenBSD. The problem occurs in two very different computers with same card but different manufacturer. This card works well with snd-es1371 ALSA driver under Linux. Both cards have CT5880 chip inside. The card is perfectly recognized by the kernel: eap0 at pci0 dev 10 function 0 Ensoniq CT5880 rev 0x02: irq 5 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at eap0 midi0 at eap0: AudioPCI MIDI UART I can record and play sounds like this: openbsd-remigio# cat /dev/audio/ file /* for recording */ openbsd-remigio# cat file /dev/audio /* for playing */ I can also modify mixer settings with mixerctl command. The issue arises when I want to change recording parameters with audioctl. I can not change any parameter at all: openbsd-remigio# audioctl -a name=Ensoniq AudioPCI version= config=eap encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16* properties=full_duplex,mmap,independent full_duplex=0 fullduplex=0 blocksize=4384 hiwat=14 lowat=0 monitor_gain=0 mode= play.rate=44100 play.channels=1 play.precision=8 play.encoding=mulaw play.gain=127 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=800 play.samples=65136 play.eof=0 play.pause=0 play.error=1 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 record.rate=8000 record.channels=1 record.precision=8 record.encoding=mulaw record.gain=191 record.balance=32 record.port=0x2 record.avail_ports=0x7 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.errors=0 ** openbsd-remigio# audioctl record.rate=22050 audioctl: set failed: Invalid argument I can not change anything, I always get the same error message. I will apreciate your help. Am I missing something? Thanks in advance. Ramiro PS: (from Spain, sorry, my english is not very precise)
Re: pf stops URLs without a trailing slash
On Tue, Aug 16, 2005 at 12:00:26AM +1000, Zoong PHAM wrote: [...] I know that a correct URL is the one with trailing slash if the last part is a directory name. So apart from teaching users to use correct URLs or investigate to use Apache rewrite module, is there any thing I can do with pf to get around the problem? [...] (Assuming Apache) One thing to note about URLs which point to directories which don't have trailing slashes it they will get a URL redirect back which states the name of the web server how it is configured and not how it was passed in that particular request. So if the request was for http://mywebserver.com/directory you could get redirected to http://www.mywebserver.com/directory/ which is slightly different.
Re: pf stops URLs without a trailing slash
On Monday, 15 August 2005 at 22:12:19 +0800, Lars Hansson wrote: Highly unlikely, pf does not inspect package contents. More information on the problem is needed such as actual error messages from www browsers and the apache logs. From Apache access_log I now understand the problem. Since I use a reverse proxy server in front of Apache, it redirects the requests to different ports that were not opened by pf. As soon as I open those ports, the URLs without trailing slash work. Thanks, Zoong
Re: pf stops URLs without a trailing slash
On Monday, 15 August 2005 at 15:59:13 +0100, John Wright wrote: One thing to note about URLs which point to directories which don't have trailing slashes it they will get a URL redirect back which states the name of the web server how it is configured and not how it was passed in that particular request. So if the request was for http://mywebserver.com/directory you could get redirected to http://www.mywebserver.com/directory/ which is slightly different. That's the problem combined with the way my reverse proxy works: The original request (without trailing slashes and at port 80) appears as from the local IP. Apache redirects it by appends a trailing slash to the original URL. But this time, it appears from the client's IP at some ports that I defined in the reverse proxy settings. Anyway, I open those ports in pf and now things work as before. Thanks, Zoong
CARP packets
Why CARP not send packets with physical CARP interface address ? I think there is a some good reason for that. This will be usefull to check packets from CARP address with tcpdump. thanks, luiz
[Fwd: Re: ntpd could not parse pool.ntp.org]
I forgot to say: You'll need to configure your wife's PC to have a default gateway of 192.169.1.9 and use a dns server of 192.168.0.1 Cheers. Original Message Subject:Re: ntpd could not parse pool.ntp.org Date: Mon, 15 Aug 2005 13:36:09 +0100 From: Nick [EMAIL PROTECTED] To: Mike Henker [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] Mike, There's a few things to do and I thought I'd get in early before you got answers like read the man pages... It looks like your openbsd box isn't doing DNS lookups. You'll need to correct this by editing /etc/resolv.conf to have your adsl router in it - eg: lookup file bind nameserver 192.168.0.1 This'll sort your ntp problem out as it'll now lookup pool.ntp.org properly. Test DNS lookups by either using: lynx news.bbc.co.uk OR nslookup news.bbs.co.uk If these fail, start troubleshooting - it could be that the nameserver needs to be the IP of your ISP's DNS servers - these can usually be found on their support website. Next to get your packets routing properly you'll need to either: Add a route on your adsl router to point the 192.168.1.0 255.255.255.0 network to the 192.168.0.3 interface on your openbsd box. (recommended) OR: use your openbsd box to nat the 192.168.1.0/24 network to its external IP of 192.168.0.3 by adding in a couple of lines like: EXT_IF=rl1 nat on $EXT_IF from !($EXT_IF) to any - ($EXT_IF) Have a look in man pf.conf for details (it's under the Translation section). tcpdump -ni pflog0 and tcpdump -ni rl1 will help troubleshoot network issues on the openbsd box. Make sure that the /etc/mygate file on your openbsd box has one line in it that says: 192.168.0.1 This'll make sure that all packets get diverted to your router. The problem I think you've got is that your adsl router is receiving packets from your wifes PC but doesn't know where that subnet is to send packets back. It needs a static route adding in. I'm also assuming your adsl router is doing the main network address translation which I'm pretty certain is correct as your adsl router has a 192.168.0.1 internal IP address. OpenBSD has a steep learning curve but it's a great system once you've learnt a bit. (The mailing list can be a bit vicious though.) Cheers - Nick Mike Henker wrote: I checked the file you said and is correct. I think the problem is what you said because if I do a ping and a messages appears saying ping: unknow host http://www.openbsd.org; Perhaps giving the maximun info will understand better what I want to do. I installed OpenBSD 3.7 I have a router at home and want to put a firewall between the router and the lan I have at home. The gateway (on the router is 192.168.0.1) The OpenBSD firewall I installed has 2 nerwork cards - 192.168.0.3 - 192.169.1.9 Like the man afterboot says I enabled in /etc/sysctl.conf: net.inet.ip.forwarding=1 But seems not to work, because the machines in the intranet (my wife machines has the IP 192.168.1.20 for example) can t exit to Internet For to verify network interface configuration like the man afterboot says i did ifconfig -a for to see if the network interfaces are properly configured I paste the info: lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 33224 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:50:ba:be:09:35 media: Ethernet autoselect (100base TX full-duplex) status: active inet 192.168.1.3 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::250:baff:febe:935%rl0 prefixlen 64 scopeid 0x1 rl1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:60:67:75:ae:e7 media: Ethernet autoselect (10baseT) status: active inet 192.168.0.9 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::260:67ff:fe75:aee7%rl1 prefixlen 64 scopeid 0x2 pf log0: flags=0 mtu 33224 pf sync0: flags=0 mtu 2020 enc0: flags=0 mtu 1536 I m lost after that point, because I think the network cards are ok plus I enabled in /etc/sysctl.conf: net.inet.ip.forwarding=1 Thanks, Mike Chris Kuethe escribis: On 8/14/05, Mike Henker [EMAIL PROTECTED] wrote: Hi Chris, exactly what s the name of the file where I must to look? Salutes, Mike /etc/ntp.conf as an aside, you do have working name resolution on that machine, right? can you ping things by name? does lynx http://www.openbsd.org/; work? CK
Re: ntpd could not parse pool.ntp.org
You re right, Im sorry I wrote an error instead of 192.169.1.x I mean 192.168.1.x I know what I want to do, the problem is I don t know how to configurate the firewall: For to ilustrate better the structure is: Router-OpenBSDFirewall-Hub-Intranet Lan (with some machines connected) Looking nearly: Router (with gateway 192.168.0.1) OpenBSD with 2 network cards: One network card 192.168.0.9 (connected to the router) One network Card 192.168.1.3 (connected to a HUB) I want to connect my wife's computer and the rest of machines (my home lan) to the hub for to be protected by the OpenBSD firewall, and all the traffic will pass through the OpenBSD firewall. I suppose NAT is running on my 192.168.0.1 router because if I connect a machine directly to the router just need 3 parameters for to surf on Internet (my ISP give me that info) The gateway 192.168.0.1 A Primary DNS 194.224.52.6 A secondary DNS 194.224.52.4 Greg the info you need: My wife computer s 192.168.1.20 My laptop 192.168.1.19 Another machine 192.168.1.18 mygate file has: 192.168.0.1 Results of netstat -rn Routing tables Internet: DestinationGateway Flags Refs Use Mtu Interface default192.168.0.1 UGS 0 0- rl1 127/8 127.0.0.1 UGRS0 033224 lo0 127.0.0.1 127.0.0.1 UH 1104 33224 lo0 192.168.0/24 link#2 UC 1 0- rl1 192.168.0.10:4:76:95:70:bb UHLc1 0- rl1 192.168.1/24 link#1 UC 0 0- rl0 224/4 127.0.0.1 URS 0 033224 lo0 I suppose I must to put as gateway in the machines connected to the hub the gateway 192.168.1.3 (remember is the network card of the OpenBSD firewall connected to the Hub) Salutes, Mike Greg Thomas escribis: This is a basic networking problem. You need to post MUCH more info. We'll assume NAT is running on your 192.168.0.1 router. A little drawing of your network with IPs of your workstations, firewall, and router would help. Either you have a typo below or you don't understand TCP/IP, see my note below. Need contents of etc/mygate. Results of netstat -rn. On 8/15/05, Mike Henker [EMAIL PROTECTED] wrote: I checked the file you said and is correct. I think the problem is what you said because if I do a ping and a messages appears saying ping: unknow host http://www.openbsd.org; Perhaps giving the maximun info will understand better what I want to do. I installed OpenBSD 3.7 I have a router at home and want to put a firewall between the router and the lan I have at home. The gateway (on the router is 192.168.0.1) The OpenBSD firewall I installed has 2 nerwork cards - 192.168.0.3 - 192.169.1.9 Like the man afterboot says I enabled in /etc/sysctl.conf: net.inet.ip.forwarding=1 But seems not to work, because the machines in the intranet (my wife machines has the IP 192.168.1.20 for example) can t exit to Internet You have 192.168.1.x in that last sentence but 192.169.1.x up above. I assume you mean: 192.168.1.20 - 192.168.1.9/192.168.0.3 - 192.168.0.1 - internet Greg
3.7 ,xdm and fluxbox
I install fluxbox on OpenBSD 3.7 . In My rc.conf I add xdm= and configured my Xsession file (/etc/X11/xdm/Xsession fi xterm fluxbox fi Fluxbox starting but no have background [demime 1.01d removed an attachment of type APPLICATION/DEFANGED which had a name of smonek.19337DEFANGED-vcf]
Re: 3.7 ,xdm and fluxbox
On Mon, Aug 15, 2005 at 06:22:33PM +0200, Smonek wrote: I install fluxbox on OpenBSD 3.7 . In My rc.conf I add xdm= and configured my Xsession file (/etc/X11/xdm/Xsession fi xterm fluxbox fi Fluxbox starting but no have background firstable, use local XSession file( ~/.xsession). startfluxbox(1) is much more flexible then just fluxbox(1). first one uses ~/.fluxbox/startup or theme config file, second one uses only theme config file. Anyway, check your $PATH and make sure that program, which is used for setting background, exists( and is it covered by $PATH). -- Lukasz Sztachanski ...proud user of C8H10N4O2 :) http://szati.blogspot.com http://rudy.mif.pg.gda.pl/~szati/szati.asc
compiling sendmail with sasl support
Hello! I am having headaches with enabling sasl in sendmail. Please give me some hints how to do it.. My goal is to enable authentication in sendmail.. I've installed cyrus-sasl-2.1.20p3. After that I've downloaded the sources and try to recompile sendmail. I've found out that I have to put these two lines to site.config.m4 which should be in devtools/Site but I there isn't such directory. APPENDDEF(`confLIBDIRS', `-L/usr/local/lib/sasl2') APPENDDEF(`confINCDIRS', `-I/usr/local/include/sasl') What should I do? BR, Jernej
Re: compiling sendmail with sasl support
echo WANT_SMTPAUTH=1/etc/mk.conf cd /usr/src/gnu/usr.sbin/sendmail make obj; make depend; make; sudo make install -ME On 8/15/05, Jernej Vodopivec [EMAIL PROTECTED] wrote: Hello! I am having headaches with enabling sasl in sendmail. Please give me some hints how to do it.. My goal is to enable authentication in sendmail.. I've installed cyrus-sasl-2.1.20p3. After that I've downloaded the sources and try to recompile sendmail. I've found out that I have to put these two lines to site.config.m4 which should be in devtools/Site but I there isn't such directory. APPENDDEF(`confLIBDIRS', `-L/usr/local/lib/sasl2') APPENDDEF(`confINCDIRS', `-I/usr/local/include/sasl') What should I do? BR, Jernej -- http://erdelynet.com/ Support OpenBSD! http://www.openbsd.org/orders.html
Re: [Fwd: Re: ntpd could not parse pool.ntp.org]
On 8/15/05, Nick [EMAIL PROTECTED] wrote: OpenBSD has a steep learning curve but it's a great system once you've learnt a bit. (The mailing list can be a bit vicious though.) Whether OpenBSD has a steep learning curve or not is irrelevant as this issue is almost a pure networking one. It sounds like Mike is actually getting around OpenBSD fairly well. Greg
Re: i-opener prob
On Sun, 2005-08-14 at 21:54:15 -0400, roger proclaimed... I have an old i-opener with a bad modem (I think.). And I have a brand new i-opener that does an opening tutorial and then freezes...tries to dial-up to no avail. Any suggestions? I'm going crazy. Try adding more pepper and changing the oil on it; that should make things better. Or you can actually tell us wtf your problem is.
Howto for Ethereal on OpenBSD 3.7 (covers 0.10.12 now)
The howto at http://www.linbsd.org/ethereal_on_openbsd37.html has been updated to include a patch to allow 0.10.12 to compile/install. I am not your puppet. Since when? Now, get your spongy pink ass out there, and dance for the cameras. -Death to Smoochy -- Forwarded message -- Date: Fri, 5 Aug 2005 11:00:59 -0500 (CDT) From: Ober Heim [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Howto for Ethereal on OpenBSD 3.7 Now before everyone goes off half cocked about 'ohh, I read that application is insecure!' rant, be aware that process separation is currently in the works by me. With that said, I put together a simple how-to on getting ethereal 0.10.11 to compile properly. http://www.linbsd.org/ethereal_on_openbsd37.html As far as security goes, it goes without saying: Dont run ethereal in capture/decode mode as root. Capture with tcpdump to a file and read with ethereal as a non privileged user. You can even chown _ethereal /dev/bpf* if you are really inclined to run it as the primary capture device. Limit your captures to specific protocols you need and nothing else. Most of the time that there are exploits, it happens to deal with specific dissectors that you do not care about. So, say if you only want to capture web traffic then do so. ethereal -R http Or limit it with capture filters to specific ports ethereal port 80 /rant I am not your puppet. Since when? Now, get your spongy pink ass out there, and dance for the cameras. -Death to Smoochy
newsyslog running twice with $W1DO5 as when field - with solution
Well since I wrote it all down below I think I know what happened. Maybe this will help someone else as dumb as me someday. I think the problem is that I also have ntpdate scheduled at 5am... so the one second adjustment must have caused cron to run the newsyslog again. (the entries below show the second running one second earlier than the first) Curse this adled brain I guess the moral of the story is to not have your time update near another cron job... Bill --- It's not a question of if I am doing something wrong, its what... On 3.7: I changed my /var/log/maillog rotation to use $W1D05 which according to everthing I read, should mean Every week on Monday at 05:00. Which works great. Wonderful. Except for the entries I changed to that run twice right after each other. After the first time it ran I had this: -rw--- 1 root wheel 473930 Aug 15 15:41 /var/log/maillog -rw--- 1 root wheel 102 Aug 15 05:00 /var/log/maillog.0.gz -rw--- 1 root wheel 452207 Aug 15 05:00 /var/log/maillog.1.gz The maillog.0.gz log only contains this: Aug 15 05:00:02 ironman newsyslog[29992]: logfile turned over Aug 15 05:00:01 ironman newsyslog[3362]: logfile turned over The other ones that were affected by this also seemed to have the two different PID's when they were run, which leads me to think that two instances of newsyslog were run for some reason... I rescheduled one of my problem entries to run by itself at $W1D16 and it ran fine, as expected. Since it has resolution to the hour mark, I have to wait to have my next test of two at the same time run. Has anyone seen this problem? It only occurs on the ones that I did as $W1D05 and I definatly only have one entry for it in cron... Explosivo Internet Technologies Group http://www.Explosivo.com Hosting, Web Development, E-Commerce solutions and more If you have received this e-mail in error, please ignore and delete
Re: newsyslog running twice with $W1DO5 as when field - with solution
On Monday 15 August 2005 21:16, Bill wrote: I think the problem is that I also have ntpdate scheduled at 5am... so the one second adjustment must have caused cron to run the newsyslog again. (the entries below show the second running one second earlier than the first) Out of interest, why are you running ntpdate instead of ntpd? In theory, ntpd should provide you with equally good or even better time updating (even in the presence of things like network connections that are rarely up), and won't trigger things like the same cron job running twice. -- Simon Farnsworth [demime 1.01d removed an attachment of type application/pgp-signature]
isakmpd.conf man page additions
I am attaching a diff to the isakmpd.conf man page that I hope clarifies using certificate based authentication. I found the information in the archives, and I thought they might be better documented in the man page. I believe the changes to be correct, but please do not take my word on it as I am new to IPSec. l8rZ, -- andrew - ICQ# 253198 - JID: [EMAIL PROTECTED] Proud member: http://www.mad-techies.org BOFH excuse of the day: boss forgot system password --- isakmpd.conf.5.orig Mon Aug 15 11:24:10 2005 +++ isakmpd.conf.5 Mon Aug 15 12:22:53 2005 @@ -886,12 +886,13 @@ # Incoming phase 1 negotiations are multiplexed on the source IP address [Phase 1] 10.1.0.1= ISAKMP-peer-west +10.1.0.3= ISAKMP-peer-north # These connections are walked over after config file parsing and told # to the application layer so that it will inform us when traffic wants to # pass over them. This means we can do on-demand keying. [Phase 2] -Connections= IPsec-east-west +Connections= IPsec-east-west,IPsec-east-north # Default values are commented out. [ISAKMP-peer-west] @@ -905,6 +906,20 @@ Authentication=mekmitasdigoat #Flags= +# This connection uses certifiates, it assumes you have generated a valid +# certificate from your Private-key, that includes the subjectAltName +# as used in the ID-east section and placed it in the Cert-directory. +[ISAKMP-peer-north] +Phase= 1 +#Transport=udp +Local-address= 10.1.0.2 +Address= 10.1.0.3 +#Port= isakmp +#Port= 500 +Configuration= RSA_SIG-phase-1-configuration +ID=ID-east +#Flags= + [IPsec-east-west] Phase= 2 ISAKMP-peer= ISAKMP-peer-west @@ -929,6 +944,19 @@ EXCHANGE_TYPE= QUICK_MODE Suites= QM-ESP-3DES-SHA-PFS-SUITE,QM-ESP-AES-SHA-PFS-SUITE +# Phase 1 description (Main Mode) using AUTHENTICATION_METHOD= RSA_SIG +# RSA_SIG is needed when using certificates for authentication + +[RSA_SIG-phase-1-configuration] +EXCHANGE_TYPE= ID_PROT +Transforms=3DES-SHA-RSA_SIG + +# The values here are what would be used by default in this configuration +# if an ID was not specified in the ISAKMP-peer-north section. +[ID-east] +ID-type= IPV4_ADDR +Address= 10.1.0.2 + # Data for an IKE mode-config peer [asn1_dn//C=SE/L=SomeCity/O=SomeCompany/CN=SomePeer.company.com] Address= 192.168.1.123 @@ -983,6 +1011,13 @@ GROUP_DESCRIPTION= MODP_1024 Life= Default-phase-1-lifetime +[DES-MD5-RSA_SIG] +ENCRYPTION_ALGORITHM= DES_CBC +HASH_ALGORITHM=MD5 +AUTHENTICATION_METHOD= RSA_SIG +GROUP_DESCRIPTION= MODP_1024 +Life= Default-phase-1-lifetime + [DES-SHA] ENCRYPTION_ALGORITHM= DES_CBC HASH_ALGORITHM=SHA @@ -990,6 +1025,13 @@ GROUP_DESCRIPTION= MODP_1024 Life= Default-phase-1-lifetime +[DES-SHA-RSA_SIG] +ENCRYPTION_ALGORITHM= DES_CBC +HASH_ALGORITHM=SHA +AUTHENTICATION_METHOD= RSA_SIG +GROUP_DESCRIPTION= MODP_1024 +Life= Default-phase-1-lifetime + # 3DES [3DES-SHA] @@ -999,6 +1041,13 @@ GROUP_DESCRIPTION= MODP_1024 Life= Default-phase-1-lifetime +[3DES-SHA-RSA_SIG] +ENCRYPTION_ALGORITHM= 3DES_CBC +HASH_ALGORITHM=SHA +AUTHENTICATION_METHOD= RSA_SIG +GROUP_DESCRIPTION= MODP_1024 +Life= Default-phase-1-lifetime + # Blowfish [BLF-SHA] @@ -1006,6 +1055,14 @@ KEY_LENGTH=128,96:192 HASH_ALGORITHM=SHA AUTHENTICATION_METHOD= PRE_SHARED +GROUP_DESCRIPTION= MODP_1024 +Life= Default-phase-1-lifetime + +[BLF-SHA-RSA_SIG] +ENCRYPTION_ALGORITHM= BLOWFISH_CBC +KEY_LENGTH=128,96:192 +HASH_ALGORITHM=SHA +AUTHENTICATION_METHOD= RSA_SIG GROUP_DESCRIPTION= MODP_1024 Life= Default-phase-1-lifetime
audio plays too fast
Hello! I couldn't find any acceptable solution for my problem - the problem is that sound is playing too fast. I've found out that many people has/had the same problem before but the problem is still here.. I am running obsd 3.7 on Toshiba Satellite 2410-304 (auich0 at pci0 dev 31 function 5 Intel 82801CA/CAM AC97 rev 0x02: irq 11, ICH3 AC97; ac97: codec id 0x594d803 (Yamaha YMF753-S); ac97: codec features 18 bit DAC, No 3D Stereo; audio0 at auich0). I think this is obsd specific problem because I didn't have this problem when I was running debian linux, freebsd or windows on this laptop. All the soulitons I've found (convert with sox, audioctl play.rate, madplay, buying new real sound card) are not acceptable.. I tried to play .mp3 with madplay, xmms and mplayer. The only solution I've found is that I have to resample each file from 44100 to 48000 with sox - but this isn't acceptable solution - at least not in longterm.. Is there any solution for this problem yet? Thank you! Jernej
html2text
Hello, which HTML-to-plaintext implementation is used in OpenBSD mailing lists? -Hanspeter
Re: audio plays too fast
On Mon, Aug 15, 2005 at 11:24:24PM +0200, Jernej Vodopivec wrote: The only solution I've found is that I have to resample each file from 44100 to 48000 with sox - but this isn't acceptable solution - at least not in longterm.. Is there any solution for this problem yet? mplayer is perfectly happy to resample on the fly... mplayer -af resample=48000 if memory serves...
Re: isakmpd.conf man page additions
On Mon, Aug 15, 2005 at 01:48:29PM -0700, andrew fresh wrote: I am attaching a diff to the isakmpd.conf man page that I hope clarifies using certificate based authentication. I found the information in the archives, and I thought they might be better documented in the man page. I believe the changes to be correct, but please do not take my word on it as I am new to IPSec. hi. there is a section in isakmpd(8) titled X509 AUTHENTICATION which describes a basic setup w/ certificates. i know isakmpd stuff is not always 100% clear, but can you describe what you think is missing or wrong with the page as is? (usually i moan at people for not providing diffs, but in this case i think we have enough - i need to see what you think is missing) feel free to mail me privately... jmc
keycodes and wscons
Is there a way to retrieve the keycodes and keysyms of keys pressed from wscons in a C program? A quick look at /usr/include/dev/wscons/wsconsio.h didn't jump out at me. -- james reynolds, bsc ...running back to saskatoon...
BSD PPPoA Hardware
Hi, I have a PPPoA ADSL connection and would like to use FreeBSD or OpenBSD as a gateway/server and am looking for compatible hardware that would facilitate this. I'm specifically looking to avoid combination modem + routers and NAT and port forwarding in particular. This will be a pure routed IP setup. Obviously stability is very important (So far I've been using a SpeedTouch 330 with Linux which hasn't been fun). Does anyone have any suggestions? Any advice is welcome. Thanks. Simon
keycodes and wscons
Is there a way to retrieve the keycodes and keysyms of keys pressed in OpenBSD wscons in a C program? A look at /usr/include/dev/wscons/wsconsio.h and the solution didn't jump at me. -- james reynolds, bsc ...running back to saskatoon...
Re: newsyslog running twice with $W1DO5 as when field - with solution
I did ntpd years and years back under linux when I was getting started and had a bunch of issues, so I just have not revisited it. Perhaps I will give it a look. I just threw it in to get something running... of course had I known this would be a problem... I'll spend some time checking it out On Mon, 15 Aug 2005 21:29:56 +0100 Simon Farnsworth [EMAIL PROTECTED] wrote: On Monday 15 August 2005 21:16, Bill wrote: I think the problem is that I also have ntpdate scheduled at 5am... so the one second adjustment must have caused cron to run the newsyslog again. (the entries below show the second running one second earlier than the first) Out of interest, why are you running ntpdate instead of ntpd? In theory, ntpd should provide you with equally good or even better time updating (even in the presence of things like network connections that are rarely up), and won't trigger things like the same cron job running twice. -- Simon Farnsworth [demime 1.01d removed an attachment of type application/pgp-signature] -- Explosivo Internet Technologies Group http://www.Explosivo.com Hosting, Web Development, E-Commerce solutions and more If you have received this e-mail in error, please ignore and delete
Re: Major Surprise with xdm on 3.7
On Fri, Aug 12, 2005 at 05:39:37AM -0500, Dave Feustel wrote: On Thursday 11 August 2005 19:35, Justin Reigle wrote: I now think that there is a security advantage to using xdm to bring up KDE - namely, that there is no unprotected console session which can be hijacked by someone sitting down at the computer, finding the session from which KDE was started, and putting startkde in the background. Well, what happens when they reboot the box, go in with boot -s, get the root shell and cause havoc? The computer requires a password to reboot. Clever. A password-protected power switch... If you're that concerned about people sitting down in front of your machine to cause problems, then protect it with something physical (e.g. caged rack with lock). Actually I'm not particularly concerned about this right now. What problem are you wanting to solve then? -- 73. I will not agree to let the heroes go free if they win a rigged contest, even though my advisors assure me it is impossible for them to win. --Peter Anspach's list of things to do as an Evil Overlord
Re: newsyslog running twice with $W1DO5 as when field - with solution
On Tuesday 16 August 2005 00:11, Bill wrote: I did ntpd years and years back under linux when I was getting started and had a bunch of issues, so I just have not revisited it. Perhaps I will give it a look. If by years and years ago, you mean in the 2.0 kernel era, then things are much better now (both under Linux 2.2 and later kernels, and under supported OpenBSDs). ntpd is easier to configure, thanks to the pool.ntp.org project, and modern kernels (for some rather large values of modern) include support needed to make ntpd work well. Plus, there's the OpenNTPD project, from the OpenBSD team. I just threw it in to get something running... of course had I known this would be a problem... For the archives, running ntpdate from cron is dangerous when the time adjustment is going to be backwards; it will cause the same second to happen twice, which can trigger all sorts of entertainment (cron firing the same job twice, make getting confused and other such fun). -- Simon Farnsworth [demime 1.01d removed an attachment of type application/pgp-signature]
kword crashes instantly when print or print preview selected
I'm running 3.7 release with the koffice package installed. This is 100% repeatable. Has anyone else seen this? Thanks, Dave Feustel
Re: newsyslog running twice with $W1DO5 as when field - with solution
On Tue, 16 Aug 2005 00:44:20 +0100 Simon Farnsworth [EMAIL PROTECTED] wrote: For the archives, running ntpdate from cron is dangerous when the time adjustment is going to be backwards; it will cause the same second to happen twice, which can trigger all sorts of entertainment (cron firing the same job twice, make getting confused and other such fun). -- I'm convinced - thanks for the info -- Bill Chmura Explosivo Internet Technologies Group http://www.Explosivo.com Hosting, Web Development, E-Commerce solutions and more If you have received this e-mail in error, please ignore and delete
ASUS K8S-MX + SATA = problem
Just tried adding a SATA drive to my ASUS K8S-MX system using -current (as of August 13th) and got the following message (repeated twice before the system hung up) during the boot: wd2(pciide1:0:0): timeout type: ata c_bcount: 512 c_skip: 0 This is similar to the problem I had when I tried to install OpenBSD 3.7 amd64 except that time it was for wd0 (an IDE drive) and I also got the additional line: pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 That time I tried: boot -c UKC change wd change (y/n) ? y channel [-1] ? -1 flags [0] ? 0xff0 UKC quit and was able to install the system. This time it made no difference with -current. Is there a solution to this problem (short of not using SATA drives or replacing the motherboard)? Joe dmesg output (minus the SATA drive info since I can't boot with the SATA drive attached) follows: OpenBSD 3.8-beta (GENERIC) #1: Sun Aug 14 11:59:10 CDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 502722560 (490940K) avail mem = 419856384 (410016K) using 12324 buffers containing 50479104 bytes (49296K) of memory mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon(tm) 64 Processor 2800+, 2029.83 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 SIS 760 PCI rev 0x03 ppb0 at pci0 dev 1 function 0 SIS 86C202 VGA rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 SIS 6330 VGA rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) SIS 965 PCI rev 0x47 at pci0 dev 2 function 0 not configured pciide0 at pci0 dev 2 function 5 SIS 5513 EIDE rev 0x01: 760: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: QUANTUM FIREBALLlct15 10 wd0: 16-sector PIO, LBA, 9736MB, 19941264 sectors wd1 at pciide0 channel 0 drive 1: QUANTUM FIREBALL EX3.2A wd1: 16-sector PIO, LBA, 3079MB, 6306048 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 wd2 at pciide0 channel 1 drive 0: HDS722512VLAT20 wd2: 16-sector PIO, LBA48, 117800MB, 241254720 sectors atapiscsi0 at pciide0 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: E-IDE, CD-ROM 52X/AKH, A63 SCSI0 5/cdrom removable wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 auich0 at pci0 dev 2 function 7 SIS 7012 AC97 rev 0xa0: irq 10, SiS7012 AC97 ac97: codec id 0x41445368 (Analog Devices AD1888) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ohci0 at pci0 dev 3 function 0 SIS 5597/5598 USB rev 0x0f: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 3 function 1 SIS 5597/5598 USB rev 0x0f: irq 5, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 3 function 2 SIS 5597/5598 USB rev 0x0f: irq 3, version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 3 function 3 SIS 7002 USB rev 0x00: irq 5 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: SIS EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered vendor SIS, unknown product 0x0190 (class network subclass ethernet, rev 0x00) at pci0 dev 4 function 0 not configured pciide1 at pci0 dev 5 function 0 SIS 182 SATA rev 0x01: DMA pciide1: using irq 11 for native-PCI interrupt ppb1 at pci0 dev 6 function 0 vendor SIS, unknown product 0x000a rev 0x00 pci2 at ppb1 bus 2 ppb2 at pci0 dev 7 function 0 vendor SIS, unknown product 0x000a rev 0x00 pci3 at ppb2 bus 3 dc0 at pci0 dev 9 function 0 Lite-On PNIC rev 0x20: irq 10, address 00:a0:cc:24:be:91 mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8 pchb1 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00 pchb2 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00 pchb3 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00 pchb4 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0
Re: eap driver audioctl issue
Hello I have the same issue with a SB Live 5.1. This message appears, but the setting is changed anyways... -- Andre - Original Message - From: Ramiro Aceves [EMAIL PROTECTED] To: misc@openbsd.org Sent: Monday, August 15, 2005 10:54 AM Subject: eap driver audioctl issue Hello OpenBSD fans. I am newbie to OpenBSD but have certain Linux and FreeBSD experience. I am having trouble with my audio Ensoniq CT5880 card under OpenBSD. The problem occurs in two very different computers with same card but different manufacturer. This card works well with snd-es1371 ALSA driver under Linux. Both cards have CT5880 chip inside. The card is perfectly recognized by the kernel: eap0 at pci0 dev 10 function 0 Ensoniq CT5880 rev 0x02: irq 5 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at eap0 midi0 at eap0: AudioPCI MIDI UART I can record and play sounds like this: openbsd-remigio# cat /dev/audio/ file /* for recording */ openbsd-remigio# cat file /dev/audio /* for playing */ I can also modify mixer settings with mixerctl command. The issue arises when I want to change recording parameters with audioctl. I can not change any parameter at all: openbsd-remigio# audioctl -a name=Ensoniq AudioPCI version= config=eap encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16* properties=full_duplex,mmap,independent full_duplex=0 fullduplex=0 blocksize=4384 hiwat=14 lowat=0 monitor_gain=0 mode= play.rate=44100 play.channels=1 play.precision=8 play.encoding=mulaw play.gain=127 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=800 play.samples=65136 play.eof=0 play.pause=0 play.error=1 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 record.rate=8000 record.channels=1 record.precision=8 record.encoding=mulaw record.gain=191 record.balance=32 record.port=0x2 record.avail_ports=0x7 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.errors=0 ** openbsd-remigio# audioctl record.rate=22050 audioctl: set failed: Invalid argument I can not change anything, I always get the same error message. I will apreciate your help. Am I missing something? Thanks in advance. Ramiro PS: (from Spain, sorry, my english is not very precise) -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.9/72 - Release Date: 14/8/2005
Ports Question - Update
I'm running release 3.7 and I've put the release src and ports trees in /usr. I've updated both trees using cvs. I remade unzip as per the instructions in ports.html. When I attempted to make install, I got an error message saying that unzip was already present (which it was). So I attempted to pkg_delete unzip and then got the following: === /usr/ports}cd archivers/unzip /usr/ports/archivers/unzip}sudo pkg_delete unzip Password: Can't remove unzip without also removing: xmms-1.2.10p0 kdeaddons-3.3.2 kdenetwork-3.3.2p0 xmms-mp3-1.2.10p0 /usr/ports/archivers/unzip} I don't understand why I would need to remove xmms, kdeaddons, and kdenetwork in order to remove unzip. Enlightenment will be appreciated. -Update--- I finally found the newly made unzip-5.51.tgz and tried a pkg_add -r, but it didn't work (console log follows) == /usr/ports/packages/i386/all}ls -l total 244 -rw-r--r-- 3 root wheel 122973 Aug 14 13:11 unzip-5.51.tgz /usr/ports/packages/i386/all}sudo pkg_add -r unzip-5.51.tgz Password: Can't install unzip-5.51 because it's already installed /usr/sbin/pkg_add: unzip-5.51.tgz:Fatal error /usr/ports/packages/i386/all} ===
Re: newsticker - console based ?
On Mon, 15 Aug 2005 07:32:48 -0400, Joseph C. Bender wrote: tcpdump pflog0 on to a console screen? *grin* HaHaHa !! No need to *grin* !!! This is what I have been doing over the last years !!! I had a lot of visitors; but it got boring. Now is time for a change; and an automated news reader would be the greatest thing since - pflog ! Really astonished that seemingly nothing like this exists !? Personally, I was sure someone had forked snownews or similar into a random / sequential unattended kiosk application. Uwe
Re: Kernel PPPoE is dieing...
On Mon, 15 Aug 2005 09:19:07 -0300, Felipe Mesquita wrote: The question is: 4How do i set retry number to infinite, so that it always restart the connection as soon as it deads??4 * * * * * /usr/local/sbin/chkpppoe into crontab -e for root. (I don't have access to the chkpppoe now; but there is at least one example in this list.) Uwe
Re: BSD PPPoA Hardware
On Mon, 15 Aug 2005 23:18:19 +0100, Simon Morgan [EMAIL PROTECTED] wrote: Hi, I have a PPPoA ADSL connection and would like to use FreeBSD or OpenBSD as a gateway/server and am looking for compatible hardware that would facilitate this. I'm specifically looking to avoid combination modem + routers and NAT and port forwarding in particular. This will be a pure routed IP setup. Obviously stability is very important (So far I've been using a SpeedTouch 330 with Linux which hasn't been fun). Does anyone have any suggestions? Any advice is welcome. Thanks. Simon Hi Simon, You seem to be confused on your terms. The term PPPoA means Point-to-Point Protocol over ATM (Asyncronous Transfer Mode). I seriously doubt you're running ADSL over ATM. ;-) What you're looking for is actually PPPoE (Point-to-Point Protocol over Ethernet) since your (A)DSL modem has an ethernet connection to your network and requires PPP to connect to your providers' network. The answer is yes, OpenBSD does a very good job with PPPoE. There are both userland and kernel implementations that can be used. I'm not sure which flavor of hardware you prefer but basically you need a platform that is supported by OpenBSD along with supported ethernet devices. http://www.openbsd.org/plat.html Kind Regards, JCR
