That did the trick!
Thanks very much.
Now back to trying to get the raid1 array all setup. ;-)
I was getting stopped in that process because of the second disk issue, but I
didn't notice it the first time around.
Again, thank you very much.
On Monday 25 December 2006 21:33, Shane J Pearson
Je suis actuellement absente jusqu'au 27 dicembre. Je ne pourrais virifier mes
messages qu'` mon retour. En cas d'urgence, veuillez adresser un message `
[EMAIL PROTECTED]
I will be out of the office until December 27. I will not be able to check
e-mails while I am away. Please contact [EMAIL
On Sun, Dec 24, 2006 at 01:34:47PM -0800, Passeur wrote:
Alright sorry guys I thought it was the official WIKI website.
Anyway let say I can not use QEMU, which is the case, what would you
recommend to build a live CD ? Having a second machine ? Even virtual, or
can we bypass this step as the
Hi,
I am unable to go to office dueto health reasons and my firm has
allowed me to work from home for 3 months. Icould someone please tell
me the feasible VPN Solutions I have using OpenBSD please?
1) The Company network consists of BSD\Linux\OS X\MS Windows systems
guarded by and OpenBSD
On Monday 25 December 2006 09:30, Siju George wrote:
Hi,
I am running OpenBSD 4.0 amd64 on an ASUS A8V-VM motherboard ( dmesg
below )
The audio output sound is very low.
As said in
http://www.openbsd.org/faq/faq13.html#confaudio
there is no
outputs.master
in my mixerctl ( mixerctl
Siju,
I believe debian has an isakmpd package for IPSec. Although, if you
use OpenBSD , use ipsec.conf which is a breath of fresh air for any
(including large-scale) IPSec VPN implementation.
You may also want to consider OpenVPN - http://openvpn.net. Thanks!
_Raju
On 12/26/06, Siju George
I'm no expert by any means but I am running a few
Zope/Python websites on OpenBSD 4 (GENERIC) with no
problems at all - it runs extremely well in fact.
Note that I did not install Plone because I have no
need for it right now. I am also running Zope/Python
on OpenBSD 4 inside of the SysJail
On Tue, 2006-26-12 at 22:01 +0530, Siju George wrote:
Hi,
I am unable to go to office dueto health reasons and my firm has
allowed me to work from home for 3 months. Icould someone please tell
me the feasible VPN Solutions I have using OpenBSD please?
1) The Company network consists of
- Original Message -
From: [EMAIL PROTECTED]
Date: Tuesday, December 26, 2006 21:33
Subject: amd64 and tightvnc-1.2.9
To: misc@openbsd.org
I am having trouble getting tightvnc-1.2.9 working for
amd64. The
server starts with this error shown in the log file:
Getting interface
On 12/24/06, Michael [EMAIL PROTECTED] wrote:
So, is this a bug or a feature that you can pipe the name of the
saltfile to vnconfig? Personally I consider it a feature (and am using
it right now) but it would have been nice if that was documented in the
vnconfig manual.
it reads from stdin.
On 12/25/06, Merp.com Volunteer [EMAIL PROTECTED] wrote:
We were seeing an unusually large number of complaints when doing search
results related to getting Zope/plone/python working on OpenBSD.
Is there a known caveat about using zope/plone/python-latest on openbsd 4.0
that we should be warned
On 2006/12/25 at 04:48:12PM -0800, Jeff Richards wrote:
I just rebuilt my server from 3.9 to 4.0. I was able to get
everything working except that I can no longer see my tape library unit
(HP Surestore 40x6..)
I am using the 4.0 GENERIC#1107 i386 kernel.
Here's from my dmesg:
siop0 at
Hello misc,
I just upgraded my 4.0 system to -current (GENERIC.MP), and when I
reboot, the two bnx devices could not find firmware in /etc/firmware. It
appears to be looking for /etc/firmware/bnx, but that file is not present.
I can reboot the old kernel just fine (so it appears the old bnx
On 2006/12/26 22:01, Siju George wrote:
I am unable to go to office dueto health reasons and my firm has
allowed me to work from home for 3 months. Icould someone please tell
me the feasible VPN Solutions I have using OpenBSD please?
Between fairly up-to-date OpenBSD systems, the simplest way
On 12/26/06, George C [EMAIL PROTECTED] wrote:
Hello misc,
I just upgraded my 4.0 system to -current (GENERIC.MP), and when I
reboot, the two bnx devices could not find firmware in /etc/firmware. It
appears to be looking for /etc/firmware/bnx, but that file is not present.
try the following:
I just set up a new OpenBSD box on a C2D / DG965RY motherboard and
everything works great. In the recent 4.0 changes it looked like
everything was now supported, however that turned out not to be the
case. Whenever I try to boot bsd.mp it gives kernel protection
fault, pci_intr_map: no mp
The other night I was playing with the SD card reader in my Thinkpad
X40 (dmesg below), and I noticed it began misbehaving.
The problem seemed to arise after issuing ``eject sd0'' (but I suspect
that was purely coincidental). Just now I've updated to the latest
4.0-current snapshot, and here's
Alexandre Ratchov wrote:
If you have some time could you apply all patches and see if the
device work as expected? Feel free to contact me if you need more
info about how to test these diffs and/or to make uaudio(4) work
Installed the patches, now
audioctl -f /dev/audioctl1
Scenario:
DSL - DSL modem - OpenBSD Firewall - LAN
Firewall has three legs:
bge0 - External Interface, 206.124.14.98
bge1 - Internal Interface, 192.168.0.1
sk0 - Management Interface, 192.168.0.36
Desired goal:
Perform multiple static NAT translations along with a fairly
standard rule set,
Here is a dmsg with the stock bsd kernel:
OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1053986816 (1029284K)
avail mem = 891179008 (870292K)
using 22937 buffers containing 105607168 bytes (103132K) of memory
RTC
bge1 - Internal Interface, 192.168.0.1
sk0 - Management Interface, 192.168.0.36
These are on the same network. From your ifconfig:
bge1inet 192.168.0.1 netmask 0x broadcast 192.168.255.255
sk0 inet 192.168.0.36 netmask 0xffc0 broadcast 192.168.0.63
I suspect that will
tell the PFY to fix it
On Dec 26, 2006, at 8:45 PM, B.O.F.H. wrote:
Scenario:
DSL - DSL modem - OpenBSD Firewall - LAN
Firewall has three legs:
bge0 - External Interface, 206.124.14.98
bge1 - Internal Interface, 192.168.0.1
sk0 - Management Interface, 192.168.0.36
Desired goal:
Perform
William,
Are you sure you are using the i386 build? I am using a core 2 duo on
a lenovo 0768DKU notebook and it is working fine both in bsd and
bsd.mp, the only issue it has is bsd.mp does not work if you enable
acpi at the boot prompt
Sam Fourman Jr.
On 12/27/06, William Graeber [EMAIL
I am currently using the generic amd64 build, however it produced a
strikingly similar error on the i386 build although I can't remember
exactly what it was. I haven't fooled with acpi at all, so that
probably is not the issue either.
Also, if I disable nearly everything the motherboard has
24 matches
Mail list logo
