Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Subhaditya Nath
On 5/29/21, Jean-Pierre de Villiers wrote: > In other words, you are probably better off asking on the amdgpu(4) > mailing list: > https://lists.freedesktop.org/mailman/listinfo/amd-gfx > > The link above, in fact, was copied from amdgpu(4). Other relevant > links can also be found there

Re: Advice on serial port communication

2021-05-28 Thread Joseph Olatt
Hi David and Stuart, Thank you to both of you for your insight and assistance. I have OpenBSD 6.9 running on my BBB now. This is what I did: - I created a new SD card image on an OpenBSD system (previously I was using the Debian-based MX-Linux laptop for that. - During the install process

Re: pflow on PE router

2021-05-28 Thread Chris Cappuccio
Denis Fondras [open...@ledeuns.net] wrote: > Hello, > > I used OpenBSD as a PE router on my network. The router is connected to an > IX, a > transit and multiple peers with OpenBGPd. > > Earlier this week, I enabled pflow(4) to track traffic usage. > Unfortunately enabling pf(4) on a edge

Re: iwm0: fatal firmware error

2021-05-28 Thread Chris Cappuccio
Marco Scholz [t...@disroot.org] wrote: > Hello. > My laptop (Lenovo Thinkpad T495s AMD Ryzen) reports an iwm0 fatal > firmware error. I'm running 6.9 #29. > System gets quite hot, systat shows 40-50% interrupt while idling. > Networking works fine. > > Anybody else has this issue? > > Regards,

Re: Using relayd as a reverse proxy for multiple local servers

2021-05-28 Thread Philip Kaludercic
Jean-Pierre de Villiers writes: > Personally, I would drop the keypairs you define and rename the > certificates as 'localhost.crt' for example.com and its subdomain and a > certificate 'localhost:8082' for handling beispiel.de. Similarly, > repeat this for the private keys as well. I tried

Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Jean-Pierre de Villiers
In other words, you are probably better off asking on the amdgpu(4) mailing list: https://lists.freedesktop.org/mailman/listinfo/amd-gfx The link above, in fact, was copied from amdgpu(4). Other relevant links can also be found there alongside it. Regards, JP On 21/05/27 10:54pm, Theo

Re: Using relayd as a reverse proxy for multiple local servers

2021-05-28 Thread Jean-Pierre de Villiers
Personally, I would drop the keypairs you define and rename the certificates as 'localhost.crt' for example.com and its subdomain and a certificate 'localhost:8082' for handling beispiel.de. Similarly, repeat this for the private keys as well. No further configuration is needed after that. See

Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Subhaditya Nath
On 5/28/21, Mike Larkin wrote: > On Fri, May 28, 2021 at 12:59:09PM +0530, Subhaditya Nath wrote: >> On 5/28/21, Theo de Raadt wrote: >> > amdgpu startup is slow. >> > >> > not our fault. >> > >> >> Oh. >> You mean amdgpu(4), right? >> >> But resuming from suspend is instantaneous in Linux... >>

Re: Using relayd as a reverse proxy for multiple local servers

2021-05-28 Thread Philip Kaludercic
Joel Carnat writes: > Le 27 mai 2021 à 11:03, Philip Kaludercic a écrit : >> listen on * port https tls > In my testings, using « listen on * port https tls » doesn’t work either. > What I did is replace the « * » with the IP address where I want > relayd to listen to. And as my gateway has

Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Rudy Baker
Imagine code could be changed like in Linux On Fri., May 28, 2021, 12:17 p.m. Mike Larkin, wrote: > On Fri, May 28, 2021 at 12:59:09PM +0530, Subhaditya Nath wrote: > > On 5/28/21, Theo de Raadt wrote: > > > amdgpu startup is slow. > > > > > > not our fault. > > > > > > > Oh. > > You mean

Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Mike Larkin
On Fri, May 28, 2021 at 12:59:09PM +0530, Subhaditya Nath wrote: > On 5/28/21, Theo de Raadt wrote: > > amdgpu startup is slow. > > > > not our fault. > > > > Oh. > You mean amdgpu(4), right? > > But resuming from suspend is instantaneous in Linux... > Why is it so slow on OpenBSD? > different

Re: after upgrade to 6.9, iked does not pass traffic

2021-05-28 Thread Leclerc, Sebastien
>It looks like 'keep state (if-bound)' iked.conf(5) is not present or being >respected on the return traffic to the VPN device/firewall from your internal >network.  ICMP traffic is coming into the VPN device >encrypted, being >decrypted and passed to the destination.  The destination responds

Re: Resuming from suspend takes 12-14 seconds

2021-05-28 Thread Subhaditya Nath
On 5/28/21, Theo de Raadt wrote: > amdgpu startup is slow. > > not our fault. > Oh. You mean amdgpu(4), right? But resuming from suspend is instantaneous in Linux... Why is it so slow on OpenBSD? I am sorry, but I am new to OpenBSD, and I am genuinely curious about what might cause amdgpu

Re: libexpat.so.14.0 missing in latest -current

2021-05-28 Thread Anthony Campbell
On 27 May 2021, Matthias Schmidt wrote: > Hi, > > * Anthony Campbell wrote: > > After upgrading to -current today I found that xenodm would not run > > because of a missing /usr/lib/libexpat.so.14.0_ Various other things > > didn['t work either, including vim. > > Had the same. Just fetch