Re: startting arpwatch port on boot?

stan wrote: What is the prefered way to ave a daemon built from the ports tree (in this case arpwatch) strated at boot time? /etc/rc.local see man 8 rc HTH Fred -- OpenBSD on the Zaurus C3200 http://www.crowsons.net/puters/zaurus.php

Re: specified device does not match mounted device

that error message. HTH Fred -- OpenBSD on the Zaurus C3200 http://www.crowsons.net/puters/zaurus.php

Re: com0 at boot prompt input issues

wouldn't under the same circumstances. Isn't the default speed of serial console on the net4511 19200? or have you changed it in the bios? Fred -- OpenBSD on the Zaurus C3200 http://www.crowsons.net/puters/zaurus.php

Re: USB Serial Converter

Andreas Bihlmaier wrote: * Antoine Jacoutot [EMAIL PROTECTED] [2006-09-16 02:05]: Fred Crowson wrote: However when I try to connect using cu I don't get any output: zaurus:fred /home/fred cu -l /dev/cuaU0 -s19200 Well, it seems there are usb-serial converters, which do not support 19200

Re: USB Serial Converter

Antoine Jacoutot wrote: Fred Crowson wrote: However when I try to connect using cu I don't get any output: zaurus:fred /home/fred cu -l /dev/cuaU0 -s19200 Just a stupid idea, but shouldn't you use ttyU0 instead of cuaU0? I've always used cua as I'm dialing out to the machine on the end

USB Serial Converter

Hi misc@, I have just bought a usb to serial converter which is recognized as: uftdi0 at uhub0 port 2 uftdi0: FTDI FT232R USB UART, rev 2.00/6.00, addr 2 ucom0 at uftdi0 portno 1 However when I try to connect using cu I don't get any output: zaurus:fred /home/fred cu -l /dev/cuaU0 -s19200

Re: TOSBHIBA 305CDT: Card detected, but no sound.

example is given at http://www.crowsons.net/puters/fcm.php which is for a Toshiba Libretto. HTH Fred -- http://www.crowsons.net/puters/zaurus.php

Re: mount_msdos error

Stuart Henderson wrote: On 2006/06/15 16:16, Tony Abernethy wrote: nike:fred /home/fred fdisk sd1 fdisk: sysctl(machdep.bios.diskinfo): Device not configured Disk: sd1 geometry: 1980/64/32 [4055040 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info

mount_msdos error

Hi Misc, I keep getting the following error, when trying to mount a 2GB Sony Memory Stick Pro Duo (MSX-M2GN) in my Sony T7 digital camera: nike:fred /home/fred sudo mount /mnt/t7 mount_msdos: /dev/sd1i on /mnt/t7: Inappropriate file type or format Can anyone help me debug this issue

Re: Linksys USB200M device boot-time troubleshooting,

not seeing where I need to go to troubleshoot. The USB subsystem has to be initialized before ifconfig axe0, right? Thanks, Chris Hi Chris, My crystal ball is not working - but a dmesg(8) and the output of usbdevs -dv might help. Fred -- http://www.crowsons.net/puters/zaurus.php

Re: Toshiba Tecra 8000 xorg.conf

=110691734923937 Which seems to indicate that it should just work... HTH Fred -- http://www.crowsons.net/puters/zaurus.php

Re: double-letter problem in X.org

as an attachment. Thanks... Cagdas Tulek [demime 1.01d removed an attachment of type application/octet-stream which had a name of dmesg.output] Hi The following setting in your xorg.conf might help: Option XkbDisable true HTH Fred -- http://www.crowsons.net/puters/zaurus.php

Re: keeping spamd's whitelist over a rebuild

spamd-white persist file /yourspamdwhitelocation/spamd-white in your pf.conf HTH Fred -- http://www.crowsons.net/puters/zaurus.php

Re: USB -- Ethernet NIC

zaurus:fred /home/fred usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x), PXA27x(0x), rev 1.00 port 1 powered port 2 addr 2: full speed, power 120 mA, config 1, Linksys USB LAN Adapter(0x8150), Linksys(0x0bda), rev 1.00 zaurus:fred /home/fred ifconfig

Re: newbie questions

-sonjaya- Hi, What's the output of route show -inet? and ifconfig -a on both routers? HTH Fred -- http://www.crowsons.net/puters/zaurus.php

Re: tape,seagate,trouble

time to get it here in Sweden. // Regards if you order now from: https://https.openbsd.org/cgi-bin/order.eu you might get your 3.9 CD's before release date :~) It's worth it. Fred -- https://https.openbsd.org/cgi-bin/order

authentication without adding user to /etc/master.passwd

Is there a way in OpenBSD to authenticate users without adding them to /etc/master.passwd file? I have an OpenBSD server with authpf enabled and login_ldap configured. I have also a seperate LDAP server. I can authenticate any user in OpenBSD by using this seperate LDAP server if and only if

Re: mssql.so

!!! Someone can help me?! You've already been given two good hints - but a search of MARC would have also produced: http://marc.theaimsgroup.com/?l=openbsd-miscw=2r=1s=mssql.soq=t HTH Fred -- http://www.bristolshotokan.org.uk/

Re: Banking with OpenBSD (OT)

but they don't do the cheap IBAN inter-european banking that they should :~{ Fred -- http://www.bristolshotokan.org.uk/

Re: Different

to hostname.pcn0 and your configuration will be there. Then either do a /bin/sh -x /etc/netstart or reboot. HTH Fred -- http://www.bristolshotokan.org.uk/

Re: Keyboard trouble...

of keyboard is it? 5pin DIN, PS2 or USB? Fred -- http://www.bristolshotokan.org.uk/

Re: Buy OpenBSD CD set in UK. Which benefits OpenBSD most?

is always reasonable (in terms of time). But all and any donations direct to the project are valuable, and pounds buy more than the equivalent number of candian dollars. HTH Fred -- http://www.bristolshotokan.org.uk/

Re: DSL Internet Connection Question

put your local changes in /etc/resolv.conf.tail - thus when resolv.conf is overwritten your local changes will be preserved. HTH Fred

Re: Just confirming: no way to do a pf rdr based on hostname?

. Or would it be possible to use squid to do http proxying? Hope this might be of some use. Fred

Re: Help with lpd and XP

a similar message on misc back in August but no resolution. What am I doing wrong? Thanks, Greg Hi Have you tried using samba to share the printer with XP? HTH Fred

Re: DWL-AG530 Support?

Melameth, Daniel D. wrote: Fred Crowson wrote: If you are after an 802.11g card then the Edimax EW-7128G can be found in the UK at: http://marc.theaimsgroup.com/?l=openbsd-miscm=113101477530208w=2 I managed to buy two from: http://www.dabs.com/productview.aspx?Quicklinx=3119 which were

Re: DWL-AG530 Support?

/productview.aspx?Quicklinx=3119 which were marginally cheaper and they are both working well with OpenBSD 3.8, using ral. HTH Fred

Re: ath0: bogus xmit rate 0x0

=112867773214527w=2 HTH Fred

Re: OpenBSD Desktop Document

, Roy Hi Roy, Good document - would it be worth mentioning sudo(8) for all the root tasks? After using adduser(8) to create an account, just add the following line to the sudoers file using visudo(8): username ALL=(ALL) ALL HTH Fred

Re: / never unmounts properly

sync reboot. The bootup sequence still shows that / wasn't unmounted properly. Am I doing something wrong? Is there anything that can be done to deal with this? /snipped dmesg Does: #shutdown -r now Give the same problem? Fred

Re: NetMos 4S question

extra cua's to use them all. HTH Fred

Wireless issue (ath0: bogus xmit rate 0x0 error)

to the ath0 card? My dmesg, hostname.ath0 and the ps and trace follow. Thanks, in advance, Fred kernel:kernel: page fault trap, code=0 Stopped at Xrecurse_legacy8+0x7d: movl0x4(%ebx),%eax ddb ps PID PPID PGRPUID S FLAGS WAIT COMMAND kernel: page fault trap, code=0

Re: Floppy problems... (fdc missing in /dev)

: helen:fred /home/fred uname -a OpenBSD helen.crowsons.net 3.7 GENERIC#50 i386 helen:fred /home/fred dmesg|grep fd fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec HTH Fred

Re: DOS Attacks?

. If that is not possible perhaps you are better suited to a point and click OS. Good Luck - you need some. HTH Fred

Re: VPN client connectivity issues with OBSD firewall

state pass in log on $ext_if inet proto $vpn from $vpn_ip to any keep state pass in quick on $ext_if inet proto udp from $vpn_ip to any port 500 \ keep state HTH Fred

More 3.7 CD's

the great work! Fred -- ;~)

<    1   2   3   4