Hi,
I've got an OpenBSD 4.1-stable i386 setup with active spamd.
When a connection comes in it gets redirected into spamd... but the
spamdb isn't updated. When turning off the redirection or sending out
emails new servers are getting whitelisted just fine.
from /etc/rc.conf.local
are working fine now.
Michael
?
Thanks in advance,
Michael
in advance,
Michael
PS: i386 machine with OpenBSD 4.1-stable. Problem persists even after
backporting QEMU version 0.9 from OpenBSD 4.2 to 4.1.
, would something like
![ -c /dev/tun4 ] || (cd /dev; ./MAKEDEV tun4)
work inside a /etc/hostname.tun4 file, just to make sure the device exists?
Michael
Hello.
I have recently installed OpenBSD 3.7 on my future
router and I had the surpise to see that I am not able
to properly config DNS (bind) on this box.
I have generated /etc/rndc.key with the help of
rndc-confgen.
The file is successfully generated and I cat and see
its content, it is nicely
Hello,
I tried setting up a wrap.2e with the CM9 ath card as access point.
Mode 11b is working just fine but when setting mode to 11g the access
point can't be found by any other wlan devices.
When searching the web I read that there were somes issues a while bad
in 2005 and was wondering if
the GENERIC and my custom SOEKRIS
config below and also both dmesg outputs. I also made a diff of both
dmesg outputs for easy comparison.
Would be nice if someone got an idea about why that fixes the Corrupted
MAC on input issue.
Michael
--- sys/arch/i386/conf/GENERIC Wed Feb 28 22:54:43 2007
a SSH connection and the connection closes. This is with
the Soekris net4801 which got a vpn1411 card.
When I use my custom SOEKRIS kernel with the changes mentioned in my
original mail the SSH connection is stable and hifn card is working just
fine.
I hope it is now clear. =)
Michael
. =)
I also do not ask for support for my modified kernel, it is working just
fine anyway, but thought this would be a nice hint that could help
some dev to figure out the problem with vpn1411 and those USB devices
enabled in GENERIC.
Michael
Hi,
Luca Corti schrieb:
No. I've just reextracted it just to be sure, but I still get the same
error.
I got a sparc64 (Sun Ultra 5) running here which I upgraded from
4.0-stable to 4.1-stable. Just recompiled the kernel without any problems.
Michael
OpenBSD 4.1-stable (GENERIC) #1: Mon May
speed), except the lesser system and memory
usage which is already nice enough, when using IPsec.
Michael
. The ath card (CM9) I had just works in 11b mode as hostap with
OpenBSD though but the other ral card I got works great with 11g.
I would really suggest getting a Ralink card, they just work. You might
want to check out kd85.com if you are from Europe. ral_abg is the one I got.
Michael
Hi,
James Mackinnon schrieb:
I then boot the unit and I can't see it broadcasting the wireless ID for my
clients to connect
Some ath cards, maybe even all, don't support 11g mode when running as
hostap. Just had the same issue a few weeks ago and replaced it with a
nice ral_abg card.
Michael
255.255.255.192 NONE \
media autoselect mode 11b mediaopt hostap \
nwid wrap chan 7 -nwflag hidenwid \
nwkey 0xXX \
up
Btw, my CM9 ath card replaced an old 11b wi card and gave an old
notebook 11g mode too as client. =)
Michael
USB
UPS but its always nice to be able to have a package. =)
Michael
interface working with sysjail?
If yes, I would be happy about some hints in addition to the manuals.
Thanks in advance,
Michael
PS: The last news at the sysjail homepage are quite old. I found a bug
on sparc64 and already reported it, no answer so far, just wondering if
maybe someone knows
on that interface and
attach demons and have them use that virtual IP address as source when
sending out packets.
Michael
state.
Michael
tried by now to work around the problem.
Michael
only get like 10% of
the native speed especially since there is no kqemu for OpenBSD.
I can do most of what I want to do with the sysjail as it is now, but
being have to route stuff to the jail would be a big bonus.
Do you know if this is possible with FreeBSD jail?
Michael
@rui
I've just got a failure notice when sending to [EMAIL PROTECTED]:
The following message to [EMAIL PROTECTED] was undeliverable.
The reason for the problem:
5.1.0 - Unknown address error 554-'5.1.0 Sender Denied'
Final-Recipient: rfc822;[EMAIL PROTECTED]
Action: failed
Status: 5.0.0
other informations please just say so. Since this
doesn't work on either NIC in the system I asume that it is not a
hardware but a driver problem.
Thanks in advance,
Michael
PS: This is the GENERIC stable kernel with activated ACPI. The issue
also exists on the release GENERIC(.MP) kernels
.
Michael
Hi,
I suddenly had a weird wlan lockup during a big file transfer over wlan.
The access point is a WRAP.2E, 1 LAN, 128 MB with a ral0 card. See dmesg
below for more infos.
The client is an IBM X41 notebook with iwi0 and I am using an IPsec VPN
between the two machines. Just after the lockup I
26 10:13:55 warden sm-mta[17886]: Password verification failed
Jun 26 10:13:56 warden sm-mta[17886]: Could not open db
Someone got an idea what might be the problem here?
Michael
of the first network card, or even
all existing network cards in the system, but that information should be
too easy to come by. I would go for using the MACs, but I would like to
know if anyone here got any better ideas first. :-)
Thanks in advance,
Michael
is high
enough re-calculating a dictionary will not be feasible.
Well, since I want to have the partition to be automagically mounted
when I insert the USB stick (with the saltfile), having the HDD (with
the modified mount_vnd on it) and the USB stick would be enough to
decrypt it.
Michael
, so you would need to be able to change the PTR of your fixed
IP to something like mail.yourdomain.tld instead of
dsl-4433433.cust.provider.tld.
Just rent a virtual system somewhere and put everything on it. That is
a) cheaper than the electricity bill at home and b) more reliable.
Michael
Hi,
Han Boetes schrieb:
Michael wrote:
I am looking for sh/ksh replacement for the following bash command:
$ X=abcdefghi
$ echo ${X:0:2}
ab
cut(1)
Thanks a lot, sometimes the obvious solutions are the hardest to find...
$ X=abcdefghi
$ echo $X | cut -c 1-2
ab
:-)
Michael
Hi,
I am looking for sh/ksh replacement for the following bash command:
$ X=abcdefghi
$ echo ${X:0:2}
ab
Anyone got an idea?
Michael
Hi,
Paul de Weerd schrieb:
| Michael wrote:
| $ X=abcdefghi
| $ echo $X | cut -c 1-2
| ab
Note that it's not a complete replacement for bash's
${parameter:offset:length} parameter expansion implementation. If you
give it @ or an array as a parameter, behaviour is completely
different
Hi,
Beavis schrieb:
Is there anyone here that have the same problem with a dell 1950 box,
No, but with a PE 2950...
Michael
# dmesg
OpenBSD 4.2-current (GENERIC.MP) #0: Sat Jan 26 14:05:52 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU
this for a few days.
Thanks a lot, I was able to force that error by just deleting (rm -rP)
~50 GB of files (~300 MB / each) which I created before ... the system
hung before all files could be deleted.
Michael
, will try that tomorrow.
Michael
8080 \
- 192.168.3.105 port 8080
rdr pass on $ext_if proto tcp to x.x.x.x port 8080 \
- 192.168.3.106 port 8080
($ext_if:0) is the main IP of the interface
Michael
... with DRAC 5 you need 1.32, everything else before that...
total piece if shit.
Basically one can say... if you get a DRAC, you need the IE... either
Windows/IE or Wine/IE, version 6 of cause, 7 doesn't work properly.
Michael
, but I'm used to
it). /bsd (the kernal in use, whichever it is) is a copy of one of
them then, easy to identify by its file size. For me that's easier
than with a link.
Same here. :-)
Michael
I was really excited to learn that as of late OpenBSD has support for Sierra
Novatell Wireless cards. The lack of support held me back from using OpenBSD on
my laptop because I need the wireless access.
So I bought the Novatel Wireless U720 which is listed as Devices suspected of
being compatible
Thanks for the responses. I tried lowering the MTU and disabling vjcomp. This
did improve the situation but still has not completely fixed the problem.
Websites and normal network content is now properly accessible but I noticed
that it is consistently half the speed it is on windows. I tried
always work, only on two of four
systems here. Those who do not work are probably too new.
kqemu works great on my Thinkpad X41 and a Dell Optiplex SX 270, but
doesn't work on a Dell PE 2950 and some newer Optiplex at work.
Michael
page at 0x7d1e7000
kqemu: failed to unwire page at 0x82b23000
kqemu: failed to unwire page at 0x8ae4d000
Already posted that once in another topic though. Still hoping a little
that maybe qemu 0.9.1 fixes it, once that is ported.
Michael
MAC on input
I hoped that it had been fixed for good by now... :-(
Michael
*dmesg of the old version which worked:*
OpenBSD 4.2-current (GENERIC) #599: Fri Dec 14 17:13:48 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National
Got my 4.3 cd's 4 days ago :) Thanks for a great system.
I have installed 4.3 on this laptop and have a few problems:
1). using pkg_add to install packages from cd is very slow:
it took over 5 minutes to install firefox and over 10 minutes to install
abiword.
2). startx takes a minimum of
Nico Meijer wrote:
Hi Michael,
Boot into UKC with 'boot -c' and disable acpi. Check the FAQ for more
info.
FWIW- FreeBSD 7.0 won't even install on this laptop.
I have 7.0-RELEASE running on this laptop right now, just for kicks.
Works for me, in a sense. ;-)
HTH... Nico
Guess my earlier
On Fri, May 02, 2008 at 05:56:30PM -0700, [EMAIL PROTECTED] wrote:
On Fri May 2 17:29 , [EMAIL PROTECTED] sent:
On Fri May 2 17:09 , Stuart Henderson sent:
On 2008-05-02, [EMAIL PROTECTED] eone.net [EMAIL PROTECTED] eone.net
wrote:
Just tried installing mutt-1.5.17p0.tgz but it
, so i can choose what to disable.
Thanks in advance.
ps. i am from Holland so my English might be a little poor.
With kind regards,
Michael
6 is already out, the version used for release should be RC 6+ ...
Michael
I am terribly sorry, accidently clicked on the wrong recicient list... :)
Please ignore.
On Tue, 8 Aug 2006 7:42:06 +0200, Michael [EMAIL PROTECTED] wrote:
Hey,
just wanted to let you know that the current version as it comes from
ports (same as package) got some problems when trying
the content of, lets say, a small image or
a file filles from /dev/random or some other file as a key?
Minimum key length is 16, whats the maximum key length?
I am asking since I would like to use a floppy or USB stick to unlock
the encrypted folders.
Michael
the
encrypted directories which should be attachable by BSD and Linux systems.
Ok need to check for vnconfig on linux first.
Any ideas about which cipher to use? TDES / blowfish? Pros / cons?
Thanks and thanks in advance. =)
Michael
an idea if the upper still is possible somehow?
Changing permissions on those attached mounts.
Michael
On the other hand, I could just insert the encrypting script (which
reads a key from USB stick and cattaches the encraypted folder) into
.profile and the shared folder gets assigned to the user on login.
This seems to work only partly in my scenario.
Even though I can mount the same encrypted
Even though I can mount the same encrypted folder with different users
and create files, and permissions are 644 or 755 it is not possible to
access files/folders created by other users, only own stuff.
Neither is it possible, even as the owner, to change the ownership of
files/folders inside
Ok I played around a bit and what I got so far is this.
A file or directory created by a common user can be access by root as it
should be. A file created by root can not read by a user even though the
permissions allow it (644). When I issue chmod 644 file as root, it
works. A directory
Ok I played around a bit and what I got so far is this.
A file or directory created by a common user can be access by root as it
should be. A file created by root can not read by a user even though the
permissions allow it (644). When I issue chmod 644 file as root, it
works. A directory
It is startxfce4 in -current
Hello,
so I wonder if there is anybody else having the same problem.
Yes, having the same problem...
I wonder if it's a thunderbird or enigmail issue. Maybe it gets fixed
once the ports tree isn't locked anymore.
Michael
fsck them.
No problem so far, but when I try to use ccdconfig there are no devices
in /dev for the second harddisk.
Anyone got an idea how I can upgrade the system anyway without having to
compile the kernel and everything else from source while the system is
running?
Thanks in advance,
Michael
-f /mnt/etc/ccd.conf
of whatever (I think ccdconfig isn't part of the ramdisk) and then
control-D to get back to the
(I)nstall (U)pgrade (S)hell
prompt or whatever it looks like...
-p
Thanks a lot, worked perfectly. =)
Michael
not supported by device
About the other stuff, even though all updates were installed like this:
pkg_add -ui -F update -F updatedepends
when that command is entered again, it shows the same updates again for
installation.
Michael
Forgot some things...
Michael schrieb:
Hi,
I just installed the latest snapshot and it seems that there are several
things that are broken, most importantly pf.
When trying to load the rules I get this error message:
# pfctl -of /etc/pf.conf
No ALTQ support in kernel
ALTQ related
Stuart Henderson schrieb:
On 2006/10/18 16:53, Michael wrote:
I just installed the latest snapshot
that doesn't mean much without saying the date and architecture.
did you use bsd and base40.tgz files with the same date/time?
i386, latest snapshot that is available from
rsync
, or is there any chance to
get the 4.0 packages before official release so I can downgrade to a
working state?
Michael
Ryan McBride schrieb:
On Wed, Oct 18, 2006 at 04:53:39PM +0200, Michael wrote:
I just installed the latest snapshot and it seems that there are several
things that are broken, most importantly pf.
This probably means your kernel and userland is mismatched.
Did you do a manual upgrade
Just want to give a little update.
I used the new (to this time) snapshot from the second level mirror
Erlangen and it still doesn't work... same error as before.
# pfctl -f /etc/pf.conf
No ALTQ support in kernel
ALTQ related functions disabled
pfctl: DIOCADDRULE: Operation not supported by
When looking at the snapshot tgz files on the second level mirror in
Erlangen and compared the dates to those from ftp.openbsd.org I also
noticed that the files base40.tgz and comp40.tgz have a slightly
different size and md5sum.
So I downloaded the files from ftp.openbsd.org and updated the
Hi,
could it be that named ignores the listen-on directive?
All IPs are on bge0 and 10.12.13.170 on bge1
/var/named/etc/named.conf
[...]
listen-on {
localhost;
80.237.156.59;
};
//listen-on-v6 { any; };
[...]
# lsof -ni -P
[...]
named
Sorry, forgot to add dmesg:
# dmesg
OpenBSD 4.0-current (GENERIC) #1190: Tue Oct 31 17:04:30 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz (GenuineIntel 686-class) 2.81 GHz
cpu0:
jared r r spiegel schrieb:
did you make sure that /etc/hosts isn't the reason for what
you're seeing? re: 'localhost'.
# cat /etc/hosts
# $OpenBSD: hosts,v 1.11 2002/09/26 23:35:51 krw Exp $
#
# Host Database
#
# RFC 1918 specifies that these networks are internal.
# 10.0.0.0
38* internet stream tcp 0xd73d0cd0 127.0.0.1:953
namednamed 17436 39* internet6 stream tcp 0xd79a3e14 [::1]:953
Michael
chance to get someone help me, please tell me what you
need. dmesg probably, but anything else?
I would even give some dev full SSH access to the machine if it would help.
Thanks in advance,
Michael
Jasper Bal schrieb:
Anyone using webmail on OpenBSD? What's good, what's not?
I like http://roundcube.net/, using beta2
if it still work.
I installed my Soekris using tftp and used the /mfs technique described
in the WRAP links with some modifications for personal needs.
Michael
i wonder if there is anyone working on a port for enigmail to run under
openbsd?
Check -current ports and snapshot packages.
solution.
But WRAPs are good too from what I've read here, especially a lot
cheaper and they support up to two MiniPCI slots but, afaik, they don't
support pxeboot.
- Michael
On Sun, May 11, 2008 at 05:32:37PM -0400, Steven Surdock wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
..
While rebuilding the binaries for 4.3-stable, I get this error:
=== usr.sbin/config
make: don't know how to make mkmakefile.c.
partition, containing a traveling backup of some stuff. ;-)
cfs on the other hand... never really got it to work reliable.
Michael
that be under CAVEATS?
Michael
Hi,
topic says all I guess... if you need more details please let me know.
Michael
Hi,
Ryan McBride schrieb:
Well, with a bug report as detailed as this all I can say is it's
probably been fixed, try a new snapshot.
Well, this is the last available snapshot... having the issue on my X41 and
also inside qemu.
tcpdump shows that the connection gets pass'ed, but nothing
Hi,
according to http://www.openbsd.org/sparc64.html#hardware OpenBSD
works on this machine, but does anyone know if multiple UltraSPARC
IIIi CPUs are also supported?
Thanks in advance.
Michael
Hi,
Jose Fragoso schrieb:
I am having some problems while trying to run spamd in greylisting
mode in a bridge.
For some reason, spamd is not greylisting, and the all the connections
(even the initial ones) seem to timeout.
Just out of curiosity, is modulate state working for you?
Michael
the Konsole is really useless because it is either way
to small (to read) or too large (consuming too much space on screen).
Thanks in advance,
Michael
# dmesg
OpenBSD 4.4-beta (GENERIC.MP) #799: Fri Jul 11 16:49:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0
Hi,
Martin Toft schrieb:
On Mon, Jul 14, 2008 at 06:49:43PM +0200, Michael wrote:
sometime between the June 25 snapshot and today something in X changed.
Font sizes of some programms (like Konsole, Psi, xclock when using
-render) are much larger then before.
http://marc.info/?l=openbsd
Hi,
sometimes I get this on my SUN Fire v440 when there is some traffic:
cas0: status=7889090RXDONE,RX_COMP_FULL,RXMAC
cas0 stops working then. Using ifconfig cas0 down/up only helps for a
very short time. Only way to get it to work again for some time is a
full reboot.
This is using the
Hi,
adding some information...
Michael schrieb:
sometimes I get this on my SUN Fire v440 when there is some traffic:
cas0: status=7889090RXDONE,RX_COMP_FULL,RXMAC
cas0 stops working then. Using ifconfig cas0 down/up only helps for a
very short time. Only way to get it to work again for some
Hi all,
I just had my v440 crash on me with a weird message (at the end of the
dmesg). Any ideas why that happened?
console is /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.
Hi again,
Michael schrieb:
I just had my v440 crash on me with a weird message (at the end of the
dmesg). Any ideas why that happened?
Noone? Wrong list? Would tech@ or sparc@ be better?
console is /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],3f8
Copyright (c) 1982, 1986
be nice if someone could look into that.
On Wed, 23 Jul 2008 13:06:05 +0200, Michael [EMAIL PROTECTED] wrote:
adding some information...
Michael schrieb:
sometimes I get this on my SUN Fire v440 when there is some traffic:
cas0: status=7889090RXDONE,RX_COMP_FULL,RXMAC
cas0 stops working
behaviour on my ALIX... it gets to where you get at
your Soekris but instead of standing there the ALIX gets into a reboot
cycle.
/bsd md5: 3a62104b876b145d8e3c445c3ef27ff8
Michael
=== libreadline
mkdep -a -DHAVE_CONFIG_H -I/usr/src/gnu/lib/libreadline
/usr/src/gnu/lib/libreadline/readline.c
/usr/src/gnu/lib/libreadline/funmap.c
/usr/src/gnu/lib/libreadline/keymaps.c
/usr/src/gnu/lib/libreadline/vi_mode.c
/usr/src/gnu/lib/libreadline/parens.c
:
flow esp proto udp from X.X.X.X to Y.Y.Y.Y port 5000:5050 type bypass
Thanks in advance,
Michael
it up like that with port.
If that currently also isn't possible, it would be a nice to have
feature for a cleaner ipsec.conf file. Automatic expansion of port
ranges would be even better... :-)
Michael
Hi,
Alexey Vatchenko schrieb:
Why not to make it available for the public?
I am/was not even sure that this is the right list. So before I get
flamed for posting at the wrong list I wanted to be sure and not add any
attachments to make it even worse.
- Michael
The screen brightness control
Hi,
will there be any support for the fingerprint sensor on the newer
Thinkpads (anytime soon)?
Linux:
http://toe.ch/~tsa/ibm-fingerprint/
http://www.thinkwiki.org/wiki/How_to_enable_the_fingerprint_reader
http://www.qrivy.net/~michael/blua/
Vendor SDKs:
Linux: http://www.upek.com/support
://www.heise.de/ix/
Direkt link to the article:
http://www.heise.de/ix/artikel/2007/01/074/
- Michael
Hi,
I am getting no sound out of this board (ASUSTeK Computer INC. P5AD2-E-Premium)
with OpenBSD 4.0.
See dmesg for azalia error during boot:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU
L. Ahmadi schrieb:
Hi,
If you want to use /bin/sh, it works well if you replace
((i=i+1)) by
let i=i+1
Or use
I=$((I+1))
which works in sh/ksh/bash and should be pretty universal.
- Michael
the kernel crash message + ddb trace + ddb ps into a
file so I can post it here?
Thanks in advance.
- Michael
dmesg:
OpenBSD 4.0-current (GENERIC) #1287: Tue Dec 19 13:50:08 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz (GenuineIntel
1 - 100 of 1175 matches
Mail list logo
