Hello Stefan,
1.Do I need to configure symon.conf only? Do I need to
customize c_config.sh to
meet my specific requirement because c_config.sh
file contains and collect
interface and io information only?
It's not
important which file to use and where is the file. Start symon and symux
Hello,
I would like to know if such configuration is possible.
LAN1
(192.168.10.0/24) -- OpenBSD .99 -- .254 Router IPx -- Internet -- IPy
IPSec_GW (Vendor) -- LAN2 (192.168.20.0/24)
As you can see the OpenBSD 4.9
server sits on the LAN1 and has one physical interface.
When it wants to
access
185.53.27.23/esp/use/in
10.20/16 010.10.11/24
00
185.53.27.23/esp/require/out
Fabio Almeida
Em
13/11/2011, `s 12:06, Mik J escreveu:
Hello,
I would like to know
if such configuration is possible.
LAN1
(192.168.10.0/24) --
OpenBSD .99 -- .254 Router IPx
-- Internet
Almeida
Em
13/11/2011, `s 12:06, Mik J escreveu:
Hello,
I would
like to know if such configuration is possible.
LAN1
(192.168.10.0/24) -- OpenBSD .99 -- .254 Router IPx
-- Internet
--
IPy
IPSec_GW (Vendor) -- LAN2 (192.168.20.0/24)
As you can see the OpenBSD 4.9
/in
10.20/16
0 10.10.11/240 0
185.53.27.23/esp/require/out
Fabio Almeida
Em 13/11/2011, `s 12:06, Mik J escreveu:
Hello,
I would like to know if such configuration
is possible.
LAN1
(192.168.10.0/24) -- OpenBSD .99
-- .254 Router
IPx
MJ LAN1 (192.168.10.0/24) -- OpenBSD .99 -- .254 Router IPx --
Internet -- IPy IPSec_GW (Vendor) -- LAN2 (192.168.20.0/24)
MJ As you
can see the OpenBSD 4.9 server sits on the LAN1 and has one physical
interface.
MJ When it wants to access to the internet, its address
192.168.10.99 is natted in
Hello,
De : Kevin Chadwick ma1l1i...@yahoo.co.uk
Split your config in
half, choose the half you think is most likely to
cause the problem and diff
that half back to defaults and compile.
Just to ack what Kevin says. You're
trying to add and remove too many different things at once.
First take
Hello,
I would like a clarification. I have these rules and I notice an
incrementation only when there is a new incoming connection.
Here I did an ssh
connection
# pfctl -s rules -v | head -6
block drop log all
[ Evaluations:
83Packets: 0 Bytes: 0 States: 0 ]
[
Hello everyone,
I have not found how to get an equivalent of /etc/libmap.conf
on OpenBSD
I'm following a documentation written for FreeBSD and they say
echo libpthread.so libthr.so /etc/libmap.conf
Do you know how can I get
this done on OpenBSD ?
Thanks
Hello,
I have this configuration working without any bridge.
Openbsd rl0 -
LAN1 - Router - Internet - RemoteFW - LAN 2 - SomeDevice
My PC is
connected to a LAN1 switch, and it's able to ssh SomeDevice. As you can see my
OpenBSD has just one interface and the VPN is mounted between OpenBSD and
De : Wesley M. open...@e-solutions.re
@ : Mik J mikyde...@yahoo.fr
Cc : misc@openbsd.org
Envoyi le : Vendredi
17 fivrier 2012 5h45
Objet : Re: Re : vpn isakmpd ipsec, one side with only
one interface
I know ssh works also very well. But the company has
requierements : ipsec
vpn
Hello everyone,
My problem is that I cannot execute a php script in CLI. This
test script is supposed to connect to mysql and retrieve some simple results
Systeme: OpenBSD 3.9
Packages installed: php5-core-5.2.17,
php5-extensions-5.2.17,
php5-gd-5.2.17, php5-mysql-5.2.17, php5-snmp-5.2.17,
De : richardtoo...@paradise.net.nz richardtoo...@paradise.net.nz
OpenBSD 3.9? Or 4.9?
My mistake, yes it's OpenBSD 4.9
Quoting Mik J
mikyde...@yahoo.fr:
Hello everyone,
My problem is that I
cannot execute a php script in CLI. This
test script is supposed to
connect to mysql
_mysqlB
33 OctB 4 23:08 /var/run/mysql/mysql.sock -
/var/www/var/run/mysql/mysql.sock
I suppose this is normal
DeB : pavel pocheptsov
lilit-aibo...@mail.ru
CB : misc@openbsd.org
CcB : Mik J
mikyde...@yahoo.fr
EnvoyC) le : Jeudi 6 Octobre 2011 11h11
ObjetB : Re
.
Have a nice week
end
- Mail original -
De : richardtoo...@paradise.net.nz
richardtoo...@paradise.net.nz
@ : Mik J mikyde...@yahoo.fr
Cc :
misc@openbsd.org misc@openbsd.org; richardtoo...@paradise.net.nz
richardtoo...@paradise.net.nz
Envoyi le : Jeudi 6 Octobre 2011 21h51
Objet : Re
Hello,
I'm reinstalling my system from 4.9 to 5.1
I have installed
pecl-imagick and stopped/started Apache but I have a seg fault (core dumped).
If I uninstall this package Apache stops/starts nicely.
I have read this page
http://www.openbsd.org/faq/upgrade50.html#Pkgup
The last point talks
Hello,
Not exactly the accurate answer to your question but I use pure-ftpd.
It does exactly what you want: A user is chrooted and cannot see other users
directories (which are not within the user's tree)
- Mail original
-
De : Wesley open...@e-solutions.re
@ : Nicolai
:
Apache won't start after pecl-imagick installation
On 2012-05-08, Mik J
mikyde...@yahoo.fr wrote:
Hello,
I'm reinstalling my system
from 4.9 to 5.1
I have installed
pecl-imagick and stopped/started
Apache but I have a seg fault (core
dumped).
If I uninstall this
package Apache stops
Hello,
After my new OpenBSD installation, I'm trying to copy data from my
backup disk and I have these errors.
wd0f: uncorrectable data error reading
fsbn 1671616960 of 1671616896-1671617023)
It happens with different files
that belong to different directories and it's always the number fsbn
- Mail original -
De : Ted Unangst t...@tedunangst.com
On Mon,
May 14, 2012 at 10:19, Jan Stary wrote:
On May 14 08:11:43, Mik J wrote:
My first question is that I don't
understand the term fsbn.
http://lmgtfy.com/?q=openbsd+fsbn
The results for that aren't
particularly helpful
On Tue, 15 May 2012 17:33:02 +0100 (BST)
Mik J wrote:
to recover
the rest of my files (50% left) while the disk doesn't
complain
Hello,
I
wanted to give a feedback. I have copied all my directories except one that
was generating the errors that I wrote in my first mail.
The directory
Hello,
I'm able to mount a partition as a user if I have
kern.usermount=1
#
ls -l /dev/wd2*
brw-rw 1 root operator 0, 0 May 7 21:54 /dev/wd2a
# ls -l /mnt
drwxrwxr-x 2 myuser operator 512 May 7 22:38 extpart
and
#
grep operator /etc/group
operator:*:5:root,myuser
However, I'm
+0100, Mik J wrote:
...
However, I'm unable to
mount the partition if the owner of /mnt/extpart is root although
that
mount point is rwx by the group operator and myuser belongs to that
group.
# ls -l
/mnt
drwxrwxr-x 2 root operator 512 May 7
22:38 extpart
I assume
to work ?
- Mail original -
De : Mik J mikyde...@yahoo.fr
À :
misc@openbsd.org misc@openbsd.org
Cc :
Envoyé le : Mardi 8 mai 2012
22h08
Objet : Re : Apache won't start after pecl-imagick installation
Thank you for your answer.
I did use apachectl but after your email I
followed your
: Apache won't start after pecl-imagick installation
Maybe
a stupid question, but did you create the certificate the steps in the
FAQ?
http://www.openbsd.org/faq/faq10.html#HTTPS
On Fri, Jul 20, 2012 at
09:23:53AM +0100, Mik J wrote:
Hello,
I'm coming back with this
Apache startup
Hello Otto,
I was confused if I could start it manually or not. There was
indeed a little mistake in the configuration regarding the paths of the
certificate.
It's now solved.
Thank you to both of you
- Mail original
-
De : Otto Moerbeek o...@drijf.net
À : Mik J mikyde...@yahoo.fr
Cc
Hello,
Has anyone tried to install OpenERP on OpenBSD ?
I tried tryton but I
really didn't like it. There's no web interface and it requires a heavy
client. And also for other reasons.
I also tried Adempierre but it required a
libmap.conf file and OpenBSD will not have this.
Hello,
I have the following perl script that works in command line:
#!/usr/bin/perl
use Net::DNS;
my $res = Net::DNS::Resolver-new;
my $query =
$res-search(www.openbsd.org);
if ($query) {
foreach my $rr
($query-answer) {
next unless $rr-type eq A;
print
$rr-address, \n;
De : Sébastien Marie semarie-open...@latrappe.fr
On Fri, Aug 24, 2012
at 06:02:39PM +0100, Mik J wrote:
Hello,
I have the following perl
script that works in command line:
[...]
# ./dns.pl
142.244.12.42
[...]
I tried in /var/www/htdocs/cgi/ but when I
access
http
I modified the wrong file. Since I was debugging I had created many copies of
that script.
Yes your solution works. Thank you.
- Mail original -
De : Mik J mikyde...@yahoo.fr
À : misc@openbsd.org misc@openbsd.org
Cc :
Envoyé le : Vendredi 24 août 2012 23h14
Objet : Re: Perl
Hello,
The web page
http://www.openbsd.org/52.htmlsays
Added nginx(8), an
HTTP server, reverse proxy server and mail proxy server.
Does it mean that
Apache 1.3 will be removed from the default install ?
Thank you
- Mail original -
De : Nick Holland n...@holland-consulting.net
The web page
http://www.openbsd.org/52.html says
Added nginx(8), an
HTTP server, reverse proxy server and mail proxy server.
Does it mean
that Apache 1.3 will be removed from the default install ?
Thank you
Hello,
I'm trying to get a php script to authenticate with ldaps but I can't
make it work for some reason.
A basic ldap query works in command line
$
ldapsearch -x -H ldaps://myserver.mydomain.fr -W -D cn=admin,dc=mydomain,dc=fr
-b '' -s base '(objectclass=*)' namingContexts
So I'm 90% sure
De : Philip Guenther guent...@gmail.com
On Sat, Sep 22, 2012 at 7:55
AM, Mik J mikyde...@yahoo.fr wrote:
...
I think so the problem is on
the client side. When I use the command
line, I think that
/etc/openldap/ldap.conf is used by ldapsearch and in
that
file I have:
URI ldaps
De : Philip Guenther guent...@gmail.com
On Sat, Sep 22, 2012 at 3:33
PM, Mik J mikyde...@yahoo.fr wrote:
De : Philip Guenther
guent...@gmail.com
Since you have a working set up outside of the
chroot, I would think
the easiest thing would be to copy that set up into
the chroot
Hello,
I have these messages that appear in my syslog on a regular basis
Sep
27 05:52:51 obsd isakmpd[11819]: message_recv: bad message length
Sep 27
05:52:51 obsd isakmpd[11819]: dropped message from REMOTE_IP port 4500 due to
notification type Unknown 0
Sep 27 05:53:18 obsd isakmpd[11819]:
Hello,
In my message log file I have
/bsd: wd1g: uncorrectable data error
reading fsbn 27690576 of 27690560-27690591 (wd1 bn 1951859792; cn 121497 tn
166 sn 29), retrying
I used the badblocks utility an checked the whole disk
and only this block number is faulty.
I tried to override it with
command)
De : Josh Grosse j...@jggimi.homeip.net
À : misc@openbsd.org misc@openbsd.org
Envoyé le : Dimanche 18 août 2013
3h26
Objet : Re: How to mark a block as invalid ?
On Sat, Aug 17, 2013
at 10:51:36PM +0100, Mik J wrote:
Hello,
In my message log file I
have
écrit :
On Wed, 28 Oct 2015 07:45:05 + (UTC) Mik J <mikyde...@yahoo.fr> wrote:
> Hello everyone,
> I asked this question on another list a long time ago.
> * I would like to mount an iso in order to add some files# ls -l /mnt
> drwxr-xr-x 2 root wheel  512 May
Hello everyone,
I asked this question on another list a long time ago.
* I would like to mount an iso in order to add some files# ls -l /mnt
drwxr-xr-x 2 root wheel 512 May 3 15:31 iso# vnconfig svnd0 Image.iso
# mount_cd9660 -o rw /dev/svnd0c /mnt/isoAfter the mount, it's read only# ls -l
drm0 in the
kernel, it seems to boot without any problem (I tried 3 reboots)
Le Lundi 28 décembre 2015 23h15, Mik J <mikyde...@yahoo.fr> a écrit :
Hello,
I just did a fresh install with OpenBSD 5.8 and an ASUS motherboard Z97-P
The installation went fine but then from the firs
Priviet,
I would advice you to use the openvpn from the ports. I imported the
configuration from my windows clients a few days ago and I have been to make
it work in a few minutes.One of the first question is, what does the remote
end supports.
Le Samedi 2 janvier 2016 18h09, Jiri B
Hello,
I just did a fresh install with OpenBSD 5.8 and an ASUS motherboard Z97-P
The installation went fine but then from the first boot it hangs at "setting
tty flags" this is just after the partitions are fsck'edI searched on search
engines and found that people running Openbsd as a VM disable
Hello,Thank you. You are right, it's working now.Thank you
Le Jeudi 14 juillet 2016 14h38, trondd <tro...@kagu-tsuchi.com> a écrit
:
On Thu, July 14, 2016 7:00 am, Mik J wrote:
> Hello,
> Does anyone know how to install the VMWare tools on Openbsd 5.9 ?I
> un
Hello,
Does anyone know how to install the VMWare tools on Openbsd 5.9 ?I understood
that I will not install some vmware program and rather use the vmt driver which
is enabled by default in GENERIC.I can see it's loaded at bootup dmesg | grep
vmt
But what's next ?When I edit the VM parameters,
should appear
Thanks
Le Samedi 30 juillet 2016 21h19, Mik J <mikyde...@yahoo.fr> a écrit :
Hello Olivier,
About your configuration, I don't understand why you use
"mail_privileged_group = vmail" because it's only for mailbox not for
MaildirThey say "Currently this is
 mailbox Trash {
   special_use = \Trash
 }
 prefix =
}
passdb {
 args = /etc/dovecot/dovecot.passwd
 driver = passwd-file
}
protocols = imap
ssl_ca = /etc/ssl/certs/CA_Root_and_Intermediate.crt
ssl_cert = a
écrit :
On Sat, 30 Jul 2016 10:39:30 + (UTC)
Mik J <mikyde...
Hello,
I'm able to start dovecot manually as a root# dovecot
But I can't using the startup script# /etc/rc.d/dovecot start
I notice errorsJul 30 10:50:52 x dovecot: master: Dovecot v2.2.21 (5345f22)
starting up for imap
Jul 30 10:50:52 x dovecot: master: Error: service(imap-login): pipe() failed:
was feeling the login.conf
parameters were not taken into account.
Do you know how my login.conf should look like if I run dovecot with the
_vmail user ?
Regards
Le Samedi 30 juillet 2016 12h10, Olivier Burelli <oliv...@burelli.fr> a
écrit :
On Sat, 30 Jul 2016 08:56:18 + (UTC)
Openbsd: 6.0
Hello,
I have an ipsec vpn set up but I don't understand why my packets are going out
on the wrong interface.
# ipsecctl -sa
FLOWS:
flow esp in from 192.168.8.0/24 to 10.2.89.224/27 peer remote.y.y.y srcid
external.ip.x.x/32 dstid remote.y.y.y/32 type use
flow esp out from
alexan...@beard.se> a écrit
:
> > On Mon, Oct 17, 2016 at 11:34:02AM +, Mik J wrote:
>
>> Hello,
>> It is possible to redirect the boot sequence to the console using
>> # cat /etc/boot.conf
>> set tty com0
>> But then there is no screen
Hello,
I have FTP clients behind my Openbsd firewall and they want to access ftp sites
on the internet
I have read numerous documentations but haven't found the answer yet.
* I start the ftp-proxy like this
/usr/sbin/ftp-proxy -D7 -v
* I have rules in my pf.conf
anchor "ftp-proxy/*"
pass in
Hello,
It is possible to redirect the boot sequence to the console using
# cat /etc/boot.conf
set tty com0
But then there is no screen output. How is it possible to have both of them ?
Thank you
at 21:31:25 + (+0000), Mik J wrote:
:Hello,
:I've been annoyed for months/years by a few marketing companies from which I
regularly unsubriscribed (according to the law in my country they should have
done it).A few days ago I decided to make spamd work on my pf machine.
:And I trapped tha
the mail to spamd
configured with -b3) for other IPs send the mail to my mx
Regards
Le Mardi 13 décembre 2016 14h24, Craig Skinner <skin...@britvault.co.uk>
a écrit :
Hi Mik,
On Mon, 12 Dec 2016 23:21:51 +0100 Peter Hessler wrote:
> On 2016 Dec 12 (Mon) at 21:31:25 + (+0000), Mi
Hello,
I've been annoyed for months/years by a few marketing companies from which I
regularly unsubriscribed (according to the law in my country they should have
done it).A few days ago I decided to make spamd work on my pf machine.
And I trapped that spam companyDec 12 19:25:55 openbsd
Openbsd 6.0
Hello,
I have a ftp server behind my PF firewall and I would like to be able to ftp in
from the internet
It doesn't work with# /usr/sbin/ftp-proxy -D7 -v -R @ftp_internal_address -p21
-b @external_address
anchor "ftp-proxy/*"
pass in quick on $ext_if inet proto tcp to $ext_add port
...@online.fr> a
écrit :
On Sat, Jan 14, 2017 at 11:23:22PM +, Mik J wrote:
> Hmmm I don't know# pfctl -f /etc/pf.conf
> /etc/pf.conf:95: unknown user _ftp-proxy
> pfctl: Syntax error in config file: pf rules not loaded
>
> I would like to make sure that this rule would mat
to
$ftp_internal_address
Thank you
Le Samedi 14 janvier 2017 14h40, Sebastien Marie <sema...@online.fr> a
écrit :
On Sat, Jan 14, 2017 at 12:11:54PM +0000, Mik J wrote:
> Openbsd 6.0
> Hello,
> I have a ftp server behind my PF firewall and I would like to be able to ftp
in fr
on? They are using CISCO 6509 with IOS 12.2-33.SXH3a.
Thanks by advance,
Sebastien
On Tue, Mar 14, 2017 at 12:46 AM, Mik J <mikyde...@yahoo.fr> wrote:
> Hello Sebastien,
> I'm not sure there's something special to force nat-t, it's automatic.
> The natted side has to initiate th
Hello Pierre,I don't use relayd but for some of my needs with snmp, I retrieve
the statistics through a script that is executed everytime I poll a specific
OID.It might be dirty, but does the job.Regards
Le Mardi 7 mars 2017 16h08, BARDOU Pierre a écrit :
I found
Hello,
Spamd has been really efficient in blocking spam. A few of them passed through
once in a while but there's no discomfort.
But, I'm not able to use spamtrap.
#spamdb -T -a ""# spamdb | grep SPAMTRAP
SPAMTRAP|
But when I telnet port 25 and try
r> a écrit :
Hello,
Thanks for the idea, but how are you triggering a script on polling ?
BTW, I think that if snmp is not available I will stick to check_relayd wth
NRPE.
Cf. http://undeadly.org/cgi?action=article=20110220204953
--
Cordialement,
Pierre BARDOU
De : Mik J [mailto:mikyde...
Hello Sebastien,I'm not sure there's something special to force nat-t, it's
automatic.The natted side has to initiate the flow to the non natted side.If
the two sides are natted then there should be a port forward to one of
them.There should be a nat keepalive parameter as well.
Le Lundi 13
Thank you for your answer Ingo.
I'll reconfigure my mailbox to use text only
Le Dimanche 16 juillet 2017 18h45, Ingo Schwarze a écrit :
Hi Mik,
not quoting anything because your posting is too ill-formatted.
Yours is a frequently answered question. The directory
Hello,
I'm storing my mailboxes in the following directory# ls -l /var/mail/
drwx-- 11 _virtmail _virtmail 512 Jun 28 19:37 _virtmail
And it has subdirectories per domain# ls -l /var/mail/_virtmail/
drwx-- 4 _virtmail _virtmail 512 May 6 12:16 domain1.org
The problem is that
spamd-greytrap -T show
Regards
Le Mercredi 17 mai 2017 17h00, Peter N. M. Hansteen <pe...@bsdly.net> a
écrit :
On 05/17/17 16:51, Boudewijn Dijkstra wrote:
> Op Wed, 17 May 2017 13:55:58 +0200 schreef Mik J <mikyde...@yahoo.fr>:
>> Hello,
>> I'm trying to
t is blacklisted for 24 hours by adding the host to the spamd
blacklist . Spamtrap addresses are added to the /var/db/spamd
database with the following spamdb(8) command:"
So I'm expecting a spamd-greytrap table
Le Mercredi 17 mai 2017 19h10, Peter N. M. Hansteen <pe...@bsdly.net> a é
Hello,
I'm trying to make spamtrap to work
I added a spamtrap address# spamdb | grep trap
SPAMTRAP|
I started spamd with these parametersspamd_flags="-v -s 5 -S 2 -w 1 -G5:12:2400
-l 127.0.0.1 -h mx.mydomain.org -n String"
When I send an email to t...@mydomain.org, it's
Hello,I had the same problem recently.Please check the rights on the file
smtpd.conf and if necessary chmod 600 smtpd.conf
Le Vendredi 26 mai 2017 15h08, Ted Unangst a écrit :
Choose a display name wrote:
> >As always, you can post your smtpd.config, dmesg and
, Boudewijn Dijkstra
<mailinglists.boudew...@indes.com> a écrit :
Op Thu, 18 May 2017 10:23:40 +0200 schreef Peter N. M. Hansteen
<pe...@bsdly.net>:
> On Thu, May 18, 2017 at 06:09:19AM +, Mik J wrote:
>> I was reading the man spamd
>> http://man.openbsd.org/
Thank you Martijn for this quick answer.So should I do something likeexport
TRUSTED_PKG_PATH=/usr/ports/packages/amd64/all/
Le mercredi 9 mai 2018 à 15:04:29 UTC+2, Martijn van Duren
<openbsd+m...@list.imperialat.at> a écrit :
On 05/09/18 15:00, Mik J wrote:
> Hello,
>
Hello,
I probably miss something in what I'm doing.
I install packages through ports, for example I want to install php.Many other
packages are also built but not installed (php-imap, php-curl...)
So when I want to install this kind of packages I dopkg_add
Thank you for your answers.
I did a first test with exporting the variable and it worked fine.
Have a nice week
Le mercredi 9 mai 2018 à 16:17:01 UTC+2, Marc Espie <es...@nerim.net> a
écrit :
On Wed, May 09, 2018 at 01:08:49PM +0000, Mik J wrote:
> Thank you Martijn for t
at 11:09:13PM +0000, Mik J wrote:
> Hello all,
> What do you think about my initial question.When I receive an email, I have
> the following messagewarn: smtpd: parent_forward_open: /var/mail/_vmail: No
> such file or directory
> With /var/mail... not /var/rep... like I wrote in
Le 17/01/2018 à 22:24, Mik J a écrit :
> Hello,
> I'd like my firewall to start two instances one for ftp proxy and one for ftp
> proxy.So far I have in rc.confftpproxy_flags="-D7 -v -p 8021"
>
> I can run manually/usr/sbin/ftp-proxy -D7 -v -R 10.1.1.1 -p21 -b 3and t
à 11:48:00 UTC+1, Stuart Henderson
<s...@spacehopper.org> a écrit :
On 2018-01-19, Mik J <mikyde...@yahoo.fr> wrote:
> I had many kernel panic these past days. This is a 6.2 openbsd VM running o=
> n esxi 5.5
>
> # grep "" /tmp/if_vmx.dis
I've reported a lo
Hello,
I'd like my firewall to start two instances one for ftp proxy and one for ftp
proxy.So far I have in rc.confftpproxy_flags="-D7 -v -p 8021"
I can run manually/usr/sbin/ftp-proxy -D7 -v -R 10.1.1.1 -p21 -b 3and the
reverse proxy works
But I would like these to instance to start
smtp://127.0.0.1:10025
Le samedi 6 janvier 2018 à 17:00:55 UTC+1, Edgar Pettijohn
<ed...@pettijohn-web.com> a écrit :
On Sat, Jan 06, 2018 at 02:40:00PM +, Mik J wrote:
> Hello Edgar,
> I just found that the path is related to the home directory of the virtual
>
Hello,
I have multiple VMs running on ESXi.I would like to know if it's worth enabling
the apm daemon on my VM in order to spare ressources of the ESXi
Thank you
Hello Daren,
Thank you for your answer, I didn't see it earlier today.
This change in current makes sense to me.
Regards
Le mercredi 8 août 2018 à 06:07:10 UTC+2, Darren Tucker
a écrit :
On 8 August 2018 at 05:29, Mik J wrote:
> Does anyone knows what means lowdelay and though
Hello,
Does anyone knows what means lowdelay and thoughput for IPQoS parameter ?
To what DSCP correspond these words
I did a capture when writing ls in my terminal and I see DSCP=cs0.
I would have expected something else.
Regards
ercredi 8 août 2018 à 11:31:39 UTC+2, Dahlberg, David
a écrit :
Am Dienstag, den 07.08.2018, 19:29 + schrieb Mik J:
> Does anyone knows what means lowdelay and thoughput for IPQoS
> parameter ?
Bits 3 and 4 of old IP TOS field.
> To what DSCP correspond these words
You
22 janvier 2018 à 10:35:47 UTC+1, Stuart Henderson
<s...@spacehopper.org> a écrit :
On 2018/01/22 00:22, Mik J wrote:
> Le dimanche 21 janvier 2018 à 11:48:00 UTC+1, Stuart Henderson
> <s...@spacehopper.org> a écrit :
> On 2018-01-19, Mik J <mikyde...@yahoo.fr> w
Hello,
Thank you for your answers@Christian: The command takes 1s, and seem to work as
you said# dumpfs sd1c | grep clean
cgrotor 64 fmod 0 ronly 0 clean 0
@Theo: The fsck is not superfast, it takes 20s I end with that message39256
files, 5904368 used, 10865841 free
net> a écrit :
On 04/02/18 02:28, Mik J wrote:
> @Theo: The fsck is not superfast, it takes 20s I end with that message39256
> files, 5904368 used, 10865841 free (15345 frags, 1356312 blocks, 0.1%
> fragmentation)
you missed his point.
If it took 20 seconds to run, you needed to ru
Hello,
I have a script that mounts a partition and it works well except when the
partition needs to be fsck checked.How can I know if the partition needs to be
checked by fsck, I'd like to test that.If the partition needs to be checked by
fsck, I run fsck firstElse I mount the partition
Happy
Hello,
Did you have a full partition at some moment ?
I had the same, as far as I remember I had a partition full at some point.
Regards
Le jeudi 18 octobre 2018 à 19:55:49 UTC+2, schwack
a écrit :
Was prepping for 6.4 upgrade and noticed a bunch of *_writes_to_HOME
directories in my
Hello,
Does anyone know if there is an equivalent for UserTasksMax in openbsd ?
UserTasksMax=
- Sets the maximum number of OS tasks each user may run concurrently.
This controls theTasksMax=setting of the per-user slice unit
Hello,
It's been a few releases that I noticed I can't install nginx from the ports.
The problem is not nginx itself but the package ruby24-passenger-5.1.11p0
I make install in the nginx port directory, I get the crash messages below.
mv:
Hello,
Does anyone know how to change these values ?
# sysctl kern.nprocs=52
sysctl: kern.nprocs: Operation not permitted
# sysctl kern.nfiles=575
sysctl: kern.nfiles: Operation not permitted
Regards
:
> On 11/16/18 10:24 AM, Mik J wrote:
> > Hello,
> >
> > Does anyone know how to change these values ?
> >
> > # sysctl kern.nprocs=52
> > sysctl: kern.nprocs: Operation not permitted
> > # sysctl kern.nfiles=575
> > sysctl: kern.nfiles: Operation
a écrit :
On Fri, Nov 16, 2018 at 10:46:12AM +, Mik J wrote:
> Hello,
> Thank you to both of you.
> I had already changed openfiles-max=65536 in login.conf and
> kern.maxproc=16384 in sysctl.conf.
> Have a nice day
But why?
-Otto
>
> Le vendredi 16 novembre
Hello Peter,
Thank you for this article.
Do you know why, and particularly Microsoft, use very random IPs to send mails.
In that way, they make greylisting not as reliable as it should be. We could
all use greylisting if google or microsoft would use the same 4 or 5 IPs to
retry sending the
than 500 people within 24h
Le dimanche 4 novembre 2018 à 23:49:47 UTC+1, Misc User
a écrit :
On 11/4/2018 2:25 PM, Mik J wrote:
> Hello Peter,
>
> Thank you for this article.
> Do you know why, and particularly Microsoft, use very random IPs to send
> mails
écrit :
On Mon, Sep 17, 2018 at 06:33:52PM +, Mik J wrote:
>
> Really it will take time, here are the components I installed for this to
> work: opensmtp, dkimproxy, clamav, clamsmtp, nginx, roundcube, prosody,
> dovecot, let's encrypt, bind
>
> I'm using imapsy
Hello,
I started to use my own mail server two years ago, but a few years ago I tried
it unsuccessfully.
So yes it will take you some time to set it up with all options.
Now for your needs I would advice you openbsd+opensmtpd, you don't especially
need performance just a one box solution.
Baker a
écrit :
On Mon, Apr 22, 2019, 10:43 AM Thuban, wrote:
> * Otto Moerbeek le [21-04-2019 12:49:07 +0200]:
> > On Sun, Apr 21, 2019 at 09:53:52AM +0000, Mik J wrote:
> >
> > > Hello,
> > > I read the man but it's not so clear to me
> > > htt
26 mai 2019 à 22:49:25 UTC+2, Sean Kamath
a écrit :
On May 26, 2019, at 04:41, Mik J wrote:
>
> Hello,
>
> I'm coming back on this topic. I added the -K option
> # /usr/libexec/spamd -v -s 5 -S 5 -w 1 -G5:24:2400 -l 127.0.0.1 -h
> myhost.mydomain.org -y vmx0 -Y myhos
d it worked perfectly. However I'd be interested to
know what can be done with PF
Regards
Le jeudi 9 mai 2019 à 17:57:18 UTC+2, Chris Cappuccio a
écrit :
Mik J [mikyde...@yahoo.fr] wrote:
> Hello,
> Is it possible to nat both source and destination IP on the same openbsd pf
1 - 100 of 139 matches
Mail list logo