Hi List,
i am using two machines in our network as DHCP servers and want to
synchronise them via the -Y and -y switches. After a while, they get out
of sync and have slight differences in their leasefiles. After
investigating a bit, i activated the sync_debug mode in
On 05/31/2012 05:54 PM, Manolis Tzanidakis wrote:
Please reply on the list. I'm already subscribed and others might find
your questions useful. Also, don't send HTML e-mails. Check the lists'
guidelines.
On Thu (31/05/12), Eugene Yunak wrote:
Thank you very much, this is super helpful! i am
On 05/15/2012 05:43 PM, Otto Moerbeek wrote:
On Tue, May 15, 2012 at 11:35:59AM -0400, Ted Unangst wrote:
On Tue, May 15, 2012 at 17:03, Marc Peters wrote:
Hi list,
i am trying to built a 5.1 release which fails at
disklabel -w vnd0 floppy576
disklabel: unknown disk type: floppy576
On 05/16/2012 10:46 AM, Dan Harnett wrote:
On Wed, May 16, 2012 at 10:05:18AM +0200, Marc Peters wrote:
/tmp # cat /etc/disktab
# $OpenBSD: disktab,v 1.21 2010/10/19 20:23:53 deraadt Exp $
floppy288|3in|3.5in High Density Floppy, 2.88MB:\
:dt=floppy:ty=floppy:se#512:nt#2:rm
On 05/16/2012 10:27 AM, Antoine Jacoutot wrote:
But you can force a full comparison using `-d' as per sysmerge(8).
Solved my problems, thank you all.
marc
Hi list,
i am trying to built a 5.1 release which fails at
ld -Ttext 0x801001e0 -e start --warn-common -S -x -o bsd
${SYSTEM_HEAD} vers.o ${OBJS}
textdatabss dec hex
4375184 2386680 504624 7266488 6ee0b8
cp
Hi list,
i am using an envy based soundcard which is not functional on a -current
from yesterday.
dmesg snippet:
envy0 at pci3 dev 6 function 0 IC Ensemble Envy24PT/HT Audio rev 0x01:
apic 4 int 21
envy0: unknown 1724-based card, 2 inputs, 8 outputs
audio0 at envy0
midi0 at envy0: Envy24
Alexandre Ratchov a...@caoua.org wrote:
I use OpenBSD to record music (audio and midi, combined), with the
following hardware:
- a Roland XV-2020 syth module (umidi)
- a Behringer BCF-2000 control surface (umidi)
- a Studiologic SL-900 midi keyboard
- a ESI Julia card (envy)
- a
Hi List,
i have a problem with multiple DSL Lines and loadbalancing outgoing
traffic. All traffic leaves only over the first interface pppoe0 and i
can't figure out why and how to change this. Maybe the problem is, that
both lines are connected to the same provider and therefore have the
, if it's the same ISP or not.
Michel
Le 2011-12-28 12:41, Marc Peters a icrit :
Hi List,
i have a problem with multiple DSL Lines and loadbalancing outgoing
traffic. All traffic leaves only over the first interface pppoe0 and i
can't figure out why and how to change this. Maybe the problem
After upgrading to current (snapshot from Nov. 25) OpenBSD seems to be
choking on large (2GB) files (tested with GENERIC.MP and GENERIC):
$ pwd
/home/user
$ mount
...
/dev/wd0k on /home type ffs (local, nodev, nosuid, softdep)
...
$ dd if=/dev/zero of=large1 bs=1024 count=250
250+0
I just bought me the new M-Audio USB MobilePre (MK-II):
uaudio0 at uhub2 port 2 configuration 1 interface 0 M-Audio MobilePre rev
1.10/10.00 addr 2
uaudio0: audio rev 1.00, 0 mixer controls
audio0 at uaudio0
Indeed, 'mixerctl -a' shows nothing; but
aucat -u -C 0:1 -e s24le -r 48000 -o
Jacob Meuser jake...@sdf.lonestar.org wrote:
On Mon, Feb 28, 2011 at 11:57:20PM +0100, pet...@schwertfisch.de wrote:
Hi,
using a recent snapshot of 4.9, some USB devices are no longer
attached on boot. They used to be detected/attached automatically
in OpenBSD 4.8.
The dmesg
Hi,
using a recent snapshot of 4.9, some USB devices are no longer
attached on boot. They used to be detected/attached automatically
in OpenBSD 4.8.
The dmesg outputs attached below show how my KORG nanokontrol midi
controller gets attached in 4.8 but is completely ignored in the
recent
Hi,
I am enjoying aucat on OpenBSD 4.8 current (snapshot from end of August),
but sometimes the audio server just exits, leaving the currently
running audio application(s) homeless and confused.
I can sort of reproduce this behavior with audacity (from ports), although it
also happens with other
Hi,
I've just upgraded to a recent snapshot (August 11th).
There is some trouble with midicat:
$ midicat -o - | hexdump -e '1/1 %x'
Segmentation fault (core dumped)
$ midicat -o - -q rmidi:0 | hexdump -e '1/1 %x'
Segmentation fault (core dumped)
$ midicat -o - -q rmidi:1 | hexdump -e '1/1 %x'
Alexandre Ratchov a...@caoua.org wrote:
ah, a bug in the options parsing code, the diff below should
fix it, does it?
Thanks, it does!
Now I can use my nanocontrol to control the playback volume of
remote hosts. Or play the piano across the net. This is great.
Dirk
Index: aucat.c
Hi list,
i updated my OpenBSD box this weekend and it seems, my usb-devices
aren't working anymore; they did before. I updated my 4.6-stable to 4.7
and then to 4.7-stable. I tried a printer, a mouse and a harddisk, none
gets recognized by the system; the harddisk powers on though. is there
any
Jacob Meuser jake...@sdf.lonestar.org wrote:
On Tue, Jul 13, 2010 at 09:10:35AM +0200, Jan Stary wrote:
On Feb 21 14:04:01, Alexandre Ratchov wrote:
On Sun, Feb 21, 2010 at 12:29:15AM +0100, Jan Stary wrote:
More generally, what is the status of uaudio(4)?
It works reliably,
Jacob Meuser jake...@sdf.lonestar.org wrote:
E-Mu 0202 USB. it was a gift from patrick keshishian (thanks!).
it's also a USB 2.0 device, so there's also USB 2.0 support for uaudio
in that patchset. the 0202 also uses a sync endpoint for playback, so
that's finally implemented (the first
Hi,
I wanted to test a current snapshot on my machine.
When booting the snapshot, I get
...
trm0 at pci0 dev 9 function 0 Tekram DC-3x5U rev 0x01: apic 2 int 17 (irq 5)
scsibus at trm0: 8 targets, initiator 7
panic: scsi_done called twice on x5 (0xd6197000)
(This is transcribed from paper)
I
Aaron Mason simplersolut...@gmail.com wrote:
Could you post a dmesg of 4.6-release - we don't know a thing about your
system.
Sure (sorry, I should have thought of this):
OpenBSD 4.6 (GENERIC) #1: Fri Oct 23 17:09:17 CEST 2009
pet...@schwertfisch.de wrote:
Aaron Mason simplersolut...@gmail.com wrote:
Could you post a dmesg of 4.6-release - we don't know a thing about your
system.
Sure (sorry, I should have thought of this):
OpenBSD 4.6 (GENERIC) #1: Fri Oct 23 17:09:17 CEST 2009
Alexandre Ratchov a...@caoua.org wrote:
On Fri, Oct 23, 2009 at 06:33:47PM +0200, pet...@schwertfisch.de wrote:
Ah, I see... I did not actually look at envy.c after applying
the patch. I have reinstalled the kernel, and now audio is
back to normal.
Thanks again, without your help
Jacob Meuser jake...@sdf.lonestar.org wrote:
On Sat, Oct 24, 2009 at 09:58:22AM +0200, pet...@schwertfisch.de wrote:
On the application side, I remember seeing a preliminary port of Ardour
to OpenBSD, but it seems to have disappeared.
Ardour uses jackd as it's hardware interface. there
After a fresh install of OpenBSD 4.6 my sound card stopped working,
i.e., I can hear nothing when playing audio. It worked just fine in 4.5.
The card is an M-Audio Audiophile 2496 using envy(4).
I run aucat -l before playing audio.
- OpenBSD 4.5 dmesg snippet:
...
envy0 at pci0 dev 10
Alexandre Ratchov a...@caoua.org wrote:
On Fri, Oct 23, 2009 at 11:12:34AM +0200, pet...@schwertfisch.de wrote:
After a fresh install of OpenBSD 4.6 my sound card stopped working,
i.e., I can hear nothing when playing audio. It worked just fine in 4.5.
The card is an M-Audio Audiophile
Alexandre Ratchov a...@caoua.org wrote:
On Fri, Oct 23, 2009 at 11:12:34AM +0200, pet...@schwertfisch.de wrote:
After a fresh install of OpenBSD 4.6 my sound card stopped working,
i.e., I can hear nothing when playing audio. It worked just fine in 4.5.
The card is an M-Audio
Hi list,
i'm working since a while (honestly weeks) on an soekris 5501, trying to build
a nice soho router and somehow i don't get any further, i'm not even sure if my
approach is correct, so i would appreciate a bit help.
setup is quite usual: 1 dsl, 1 lan and 1 wlan link.
in the beginning it
On Wed, 7 Jan 2009 18:29:54 -0800
Philip Guenther guent...@gmail.com wrote:
I contacted the author (G. Ritter) who suggested to compile the program
with the debug flag (-g), and to subsequently run it in gdb.
I did that, but not being a developer, the output did not tell me
anything
Hello,
I am trying to get the excellent Heirloom troff[1] running on OpenBSD.
It compiles and installs fine. However, running the compiled troff
results in random segmentation faults; sometimes it works, most of the
time it does not.
I contacted the author (G. Ritter) who suggested to compile
hi misc.
some time ago i bought a usb to serial controller. after searching the
archives and googling a lot, i found, that i want a profilic driven
controller and nearly every cheap one should run profilic. although i
thought i will be lucky, i got one, which doesn't run as expected
(Logilink USB
On Fri, 25 Jan 2008 09:43:36 +0100, Pierre Riteau wrote:
On Jan 25, 2008 9:13 AM, Nicolas Letellier [EMAIL PROTECTED]
wrote:
I use OpenBSD 4.2-stable with a core2duo laptop. When I use GENERIC
kernel, 'halt -p' works perfectly. However, when I use GENERIC.MP,
'halt -p' does not work and
hi all, here's the dmesg of my t60 running -current:
~ # dmesg
OpenBSD 4.2-current (GENERIC.MP) #0: Thu Jan 17 11:41:56 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145841152 (2046MB)
avail mem = 2072272896 (1976MB)
mainbus0 at root
bios0 at mainbus0:
Peters [EMAIL PROTECTED] wrote:
suspending the laptop doesn't work at all. neither apm -S or -z or zzz.
/usr/sbin/apmd -d doesn't give any output.
suspend only works with apm, not acpi.
Soner Tari schrieb:
Hi All,
On my network, ASP sites are served on a Microsoft IIS, and PHP sites
are on OpenBSD Apache, and there is only one Internet connection with a
single IP (all DNS records point to this IP). Since these web servers
run on different hardware/IPs, I need to distribute
hi misc,
i just want to start using altq with simply priorizing the tcp acks (and
the other lowdelay stuff as it's stated in jaceks great firewallbook). i
looked in /usr/share/pf/ackpri and added the rules there to my pf.conf.
i don't know why it doesn't work, maybe i am too blind to see what
Tonnerre LOMBARD schrieb:
Salut,
On Thu, Nov 16, 2006 at 05:38:58PM +0200, turha turha wrote:
I'm about to build a new box, and thought I'd ask first if there's any
experience with AMD's dual core processors (AM2 or s939). From what I've
read both socket types work as amd64, with bsd and
hi folks,
since yesterday i try to build stable out of the cvs-sources from
anoncvs.de.openbsd.org without success. it crashes every now and then
during the userland build-process (never during the kernel-build). i
checked the ram with memtest86 and it showed no errors. i changed the
=0x0 rrootdev=0x300 rawdev=0x302
Marc Peters schrieb:
hi folks,
since yesterday i try to build stable out of the cvs-sources from
anoncvs.de.openbsd.org without success. it crashes every now and then
during the userland build-process (never during the kernel-build). i
checked the ram
Camiel Dobbelaar schrieb:
On Mon, 13 Nov 2006, Camiel Dobbelaar wrote:
Ok, I think I found something in your original tcpdump:
Nov 11 15:15:04.389556 failinghost.domain.com.ftp
ftp-proxy.domain.com.48293: P 202:233(31) ack 56 win 46
Camiel Dobbelaar schrieb:
On Mon, 13 Nov 2006, Marc Peters wrote:
this is the output from ftp-proxy:
# /usr/sbin/ftp-proxy -d -D7
listening on 127.0.0.1 port 8021
#1 accepted connection from 192.168.0.14
#1 FTP session 1/100 started: client 192.168.0.14 to server 194.XXX.XX.180 via
proxy 194
Camiel Dobbelaar schrieb:
On Mon, 13 Nov 2006, Marc Peters wrote:
60 seconds, and the client gives me this message:
421 Service not available, remote server timed out. Connection closed (mac osx
command line ftp-client)
That CWD line did not pass out on the DMZ interface?
no it didn't
hi folks.
i have issues with the ftp-proxy. i am using openbsd 4.0 which i fetch
during the release-phase, so i think it is on status of -release. this
box is the firewall of our network, with three interfaces. xl0 is for
the internal lan, xl1 is for our dmz and xl2 is connected to internet.
to mention that it doesn't matter if i use the ip-addresses
to connect or the real hostname, the effect is the same.
Camiel Dobbelaar schrieb:
Can you show your pf.conf? Did you start ftp-proxy with any options?
On Sat, 11 Nov 2006, Marc Peters wrote:
hi folks.
i have issues
hello misc@,
is the xbase-package needed, although the package is named with
no_x11? it complains about a missing freetype-lib (which is already
discussed in may at misc@ and sometime earlier at ports@), which seems
to come with xbase.
i am just asking, because i was able to install
hello misc,
yesterday i wanted to update my openbsd-box @home to -current, as i am
still running 3.9-current as of march 13th. i downloaded the latest
snapshot from september 1st and started the upgrade. everything went
fine, but my the pppoe-connection doesn't let any traffic pass; ping and
Arnaud Bergeron schrieb:
On 9/12/06, Marc Peters [EMAIL PROTECTED] wrote:
[snip]
/etc/hostname.pppoe0:
inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev rl0 authproto pap authname
myname authkey secret up
You still need the !/sbin/route add default 0.0.0.1 in the new
hostname.pppoe0.
hi
hello misc,
i bought a soekris 4801 from wim and wanted to install it via net. when
i boot the box it gets it ip-address and when it comes to load bsd.rd it
loads the kernel but hangs during load:
comBIOS ver. 1.28 20050529 Copyright (C) 2000-2005 Soekris
Engineering.
net4801
0128
Marc Peters wrote:
hello misc,
i bought a soekris 4801 from wim and wanted to install it via net. when
i boot the box it gets it ip-address and when it comes to load bsd.rd it
loads the kernel but hangs during load:
OpenBSD/i386 PXEBOOT 1.07
switching console to com0
OpenBSD/i386 PXEBOOT
thx for your answer.
Reyk Floeter schrieb:
hi,
you have a main misunderstanding here because you're mixing up the
identities with the flows.
On Thu, Mar 09, 2006 at 09:29:29PM +0100, Marc Peters wrote:
i am using -current as of 24.02.2006 and made a realese for my other
machines. i tried
[EMAIL PROTECTED] schrieb:
[snip]
One problem is parsing and
syntax checking of pf rules so that garbage isn't fed to for
example pfctl if that is the method one chooses.
[snip]
that's where the -n option of pfctl is for, isn't it?
okay, i updated all versions to recent -current and now pkg_add works
like expected; the versions were too different, obviously.
sorry for the noise.
Marc Espie schrieb:
On Wed, Oct 12, 2005 at 05:04:56PM +0200, Marc Peters wrote:
hi all,
i wanted to install a package on an box, which i
hi all,
i wanted to install a package on an box, which i built out of the
portstree via make package. everything goes fine and the package is
available in /usr/ports/packages/i386/cdrom/ and ../ftp/. i copied
the .tgz to the machine, where i wanted to install it on, but it failed
with the
I am on OpenBSD since 3.6. Whenever i did feel i need an upgrade to a
newer version, i did, because it works for my configurations. i insert
the cd (if it's a snapshot or release), or fetch the sources, upgrade
the whole system and it simply works. that's it.
and that's the thing i am awaiting
hello misc.
i am using openbsd 3.7-release with pf and ftp-proxy. ftp-proxy is
working fine so far, but i recognised, that it establishes a new
connection for each file it transfers.
a little excerpt from netstat -an:
[snip]
tcp0 0 192.168.83.1.53966 192.168.83.14.2503
B4nsh33 schrieb:
Hi people, im having some problems implementing a firewall/router for my
company. the firewall has two interfaces, one to local lan and one to
the isp's router (static ip). We have local and remote offices,
interconnected by a wan link (cisco routers). the local office is
hi helios,
on the website of openvpn is something for the scrub-rules for doing vpn
on an openbsd box and linux-clients. my openvpn works from win (yes, i
know ;)) to obsd. try to trace with tcpdump on the logging interface if
and what is blocking your connection, that worked for me on some of
pardon, forgot to add misc@
Original-Nachricht
Betreff: Re: djbdns DNS server? Status, Pros and Cons?
Datum: Fri, 27 May 2005 11:21:00 +0200
Von: Marc Peters [EMAIL PROTECTED]
An: Paul de Weerd [EMAIL PROTECTED]
Referenzen: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED
101 - 159 of 159 matches
Mail list logo