Re: sec interface and rdomain

figuration that with tunneldomain. if you tcpdump on the enc and sec interfaces, do you see the packets you're expecting? dlg On 24 Dec 2023, at 19:21, Holger Glaess wrote: hi i try to use the new sec0 if in this manner. --- cat /etc/hostname.sec0 rdomain 10 inet 172.16.0.1 255.255.255.252

sec interface and rdomain

hi i try to use the new sec0 if in this manner. --- cat /etc/hostname.sec0 rdomain 10 inet 172.16.0.1 255.255.255.252 172.16.0.2 tunneldomain 0 up --- but it will not work . can sec work with rdomain ? happy christmas to all. Holger

Relayd with 2 interfaces

hi i would to like setup an vm that run relayd with an inbound interfaces and an outbound interface. vm host -> openbsd 7.3 i setup an vm with openbsd 7.3  with 2 interfaces net.ip.inet.forward=0 vio0 inbound vio0 outbound, on this interfaces is also setup the default gw for the vm. both

Re: OpenBSD 7.2 and VPLS

On 13.09.23 10:52, jv.cameros wrote: Hello, I'm defining an scenario based on machines with OpenBSD in which I'm trying to run an VPLS network. This scenario is similar to the one proposed here by a developer: https://github.com/rwestphal/openbsd-ldpd/wiki/VPLS-basic-test-setup although this

Re: latest amd64 snap hangs on "root on sd0a..."

On 21.06.23 18:27, Mikhail wrote: Just installed latest amd64 install73.img from cdn.openbsd.org OpenBSD 7.3-current (GENERIC.MP) #1253 Tue Jun 20 13:52:16 MDT 2023 and after installation it can't proceed further than root on sd0a (..) swap on sdb0b dump on sd0b Was working fine couple

Re: small issue with mpe

hi looks like that the patch works , but should not print "tunneldomain" instead of "rdomain" ? Holger /usr/src/sbin/ifconfig 164>ifconfig mpe1 mpe1: flags=51 rdomain 200 mtu 1500     index 82 priority 0 llprio 3     encap: txprio 0 rxprio packet     mpls: label 200     groups: mpe     

small issue with mpe

hi if you do an "ifconfig mpeX" , will not show the configured tunneldomain. /etc 59>ifconfig mpe1 mpe1: flags=51 rdomain 200 mtu 1500     index 82 priority 0 llprio 3     encap: txprio 0 rxprio packet     mpls: label 200     groups: mpe     inet 172.16.2.201 --> 0.0.0.0 netmask 0x

simple measurement between 7.2 and 7.3

hi Just for fun i did between the upgrade from 7.2 to 7.3 a simple ipferf measurement to compare the speed diffrent. the machines are diffrent hardware see  dmesg bellow. and i say "WOW" great job for you the OpenBSD Developer Team. THANK YOU. Holger on both machines i did: sysupgrade

Re: Using veb instead of bridge at vpls section

On 20.03.23 20:05, Valdrin MUJA wrote: Hello folks, I have successfully configured the VPLS by following the instruction on https://pawa.lt/posts/2018/01/vpls-with-openbsd/. Everything worked like a charm. But when I tried to use veb(4) instead of bridge(4) , I got 'Device Busy' error.

Re: VM(D) Interface Question

, default is iirc 4? To make it work, if that is the case: cd /dev ; sh ./MAKEDEV tun4 ; sh ./MAKEDEV tun5; sh ./MAKEDEV tun6 With best regards, Tobias -Original Message- From: owner-m...@openbsd.org On Behalf Of Holger Glaess Sent: Saturday, 1 October 2022 01:14 To: OpenBSD general

VM(D) Interface Question

Hi how many Interfaces can an single VM have ? With 3 Interface in my vm.conf the vm works, with 4 not i get "to many interfaces". if i put in the vm section "interfaces 6" , this fails also. any veb still exists and working. Holger switch "vswitch100" {     # lan    

Re: PC Engines APU alternative for OpenBSD - 2022h2

hi The Banana Pi R3 can be an alernative for PC Engines APU but, sadly , no support by openbsd , just linux. https://wiki.banana-pi.org/Banana_Pi_BPI-R3 Holger On 28.09.22 16:27, Mikolaj Kucharski wrote: Hi, I'm using PC Engines for years. I have many of them. I want to buy more, but

Re: bgpd loadbalancing feature

hi thank you for answer! Holger On 13.08.22 08:50, Claudio Jeker wrote: On Sat, Aug 13, 2022 at 08:27:53AM +0200, Holger Glaess wrote: hi i need a little bit help to understand how i can check if the new openbgpd do the loadbalancing wendehals# bgpctl sh nei 172.16.2.251 BGP neighbor

bgpd loadbalancing feature

hi i need a little bit help to understand how i can check if the new openbgpd do the loadbalancing wendehals# bgpctl sh nei 172.16.2.251 BGP neighbor is 172.16.2.251, remote AS 65010   BGP version 4, remote router-id 172.16.2.251   BGP state = Established, up for 00:14:33   Last read

Re: mpls and pf

colai Mathias Hansteen wrote: 1. aug. 2022 kl. 09:36 skrev Holger Glaess : hi, i have a small issue with mpls . if i do an set skip on "em0 em1" in my pf.conf the mpls network is working. i see my mpls neighbor for mpw ( ldpctl sh disco ) if i do only a "pass quick on { em

mpls and pf

hi, i have a small issue with mpls . if i do an set skip on "em0 em1" in my pf.conf the mpls network is working. i see my mpls neighbor for mpw ( ldpctl sh disco ) if i do only a "pass quick on { em0,em1 } no state" they don't show the mpls neigbor but the rule match. is there a

Re: RFC7432 (EVPN)

hi claudio , thank you for answer Holger On 18.07.22 11:40, Claudio Jeker wrote: On Sun, Jul 17, 2022 at 09:13:52PM +0200, Holger Glaess wrote: hi is there an plan or think about it to implement this RFC ? There is no plan to do this work. It will requirer a good amount of work

RFC7432 (EVPN)

hi is there an plan or think about it to implement this RFC ? Holger

ldpd bridge question

hi can i use veb instead of the bridge interface in the ldpd config ? my mpw0 interface did not coming up. the destination is reachable ( test with ping and ssh works ) mpw0 is member of my veb100 interface. Holger /etc 38>ldpctl sh l2vpn ps Interface   Neighbor    PWID  

anchors enable / disable

hi is there an possibility  to enable / disable anchors with pfctl ? like pfctl -aFooBar -T enable Feature Request ? Holger

Re: vmm error mesg since upgrade to 6.9

e first the host to 6.9 , the vm ist coming up at boot and run , in this case 6.8 . Holger then i did the vm upgrade to 6.9. Am 02.05.21 um 13:04 schrieb Dave Voutila: Holger Glaess writes: hi i did the upgrade von 6.8 to 6.9 . after reboot i get in my messages log vmd[56]: vione

vmm error mesg since upgrade to 6.9

hi i did the upgrade von 6.8 to 6.9 . after reboot i get in my messages log vmd[56]: vionet_enq_rx: descriptor too small for packet data i run only one vm on my box, this is also upgraded to 6.9. how can i fix this ? Holger

Re: blacklistd analogue

hi you can do this with ossec.net holger Am 25.03.21 um 18:00 schrieb Kapetanakis Giannis: How about a distributed setup? Has anyone thought of a way getting IPs from various servers (say linux & fail2ban) to the central OpenBSD (pf) firewall? Ideally with history in order to punish

Re: Bufferbloat, FQ-CoDel, and performance

hi i have the same issue , but only in the kernel pppoe interface. interface re3  -> vlan 7 -> pppoe0 ~ 4>ifconfig re3 hwfeatures re3: flags=8843 rdomain 40 mtu 1518 hwfeatures=8037 hardmtu 9194     lladdr 4c:02:89:0d:cb:78     index 4 priority 0 llprio 3     media: Ethernet autoselect

octeon splassert: yield: want 0 have 1

hi i get often this message "splassert: yield: want 0 have 1" in my dmesg. did i have somthing to care ? my hardware ist an edgerouter 6p . holger Copyright (c) 1982, 1986, 1989, 1991, 1993     The Regents of the University of California.  All rights reserved. Copyright (c)

Re: perl popularity inside openbsd community? (Re: Suggestion: Replace Perl ...)

hi you can do by array sub m4 { my ( $self,$args ) = @_; # $args contains # $args->{'bla'} = blub # $args->['do'} = whatever } as call ( example ) $obj->m4 ({ bla => blub , do => whatever }); holger Am 02.01.20 um 21:40 schrieb danieljb...@icloud.com: What if you want named

Re: ppppoe octeon kernel panic .6.6

hi with the current version OpenBSD 6.6-current (GENERIC.MP) #48: Tue Dec 10 16:30:01 MST 2019 dera...@octeon.openbsd.org:/usr/src/sys/arch/octeon/compile/GENERIC.MP the pppoe interface works as expected. no kernel panic anymore thanks holger Am 22.10.19 um 21:12 schrieb Holger Glaess

small aggr problem ( on current )

hi   runing version /etc 16>dmesg | more Copyright (c) 1982, 1986, 1989, 1991, 1993     The Regents of the University of California.  All rights reserved. Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.6-current (GENERIC.MP) #48: Tue Dec 10

Re: ppppoe octeon kernel panic .6.6

271451  0  0  3  0x40014200    idle0  81495   51122  0  0  3 0x14200  bored smr 1  433360  0  0  3    0x82  wait  init 0 Holger Am 22.10.19 um 21:12 schrieb Holger Glaess: hi ii will try tomorrow to do an backtrace after the p

Re: ppppoe octeon kernel panic .6.6

hi ii will try tomorrow to do an backtrace after the panic. i there additonal thinks what i can , or just this described in https://www.openbsd.org/ddb.html ? Holger Am 22.10.19 um 07:10 schrieb Peter J. Philipp: Hi, The mail from Holger Glaess seems to be missing a backtrace. I got

ppppoe octeon kernel panic .6.6

hi if i boot my edgerouter with connected dsl modem i get an kernel panic. reordering libraries: Trap cause = 2 Frame 0x98004efcb860 Trap PC 0x813cc38c RA 0x8109feac fault 0x0 0x813cc2d8 (1,98000f991b76,1,2)  ra 0x8109feac sp 0x98004efcb9b8, sz 0

may an edgerouter or pair / queue porblem

 hi hi my setup edgerouter 6p with OpenBSD 6.5 an DSL line with up to 100Mbit an Cable Line with 200/20 Mbit the lines are separated my rdomain and connected to the main rdomain 0 by pair interfaces i dont use outbound loadbalancing but i delegate some traffic , example sip or IPv6

dmesg for edgerouter 6p

hi i upgrade from an native 6.4 beta installation , no problems at all. / 29>dmesg Copyright (c) 1982, 1986, 1989, 1991, 1993     The Regents of the University of California.  All rights reserved. Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.4

Re: u-boot loader edgerouter

hi did you upgrade the bootloader as well ? take a look at https://community.ubnt.com/t5/EdgeMAX-Updates-Blog/EdgeMAX-EdgeRouter-software-release-v1-10-6/ba-p/2466640 holger Am 08.10.2018 um 13:40 schrieb Oliver Marugg: Hi Did the test on my ERLs also: I upgraded to ubnts rel 1.10.7

u-boot loader edgerouter

hi the edgerouter becomes an new version of his u-boot bootloader due software update or , maybe , or as new delivery. this version break the boot proccess after fatload usb 0 $(loadaddr) bsd; then he load from the mmc boot partition an file called vmlinux.64.md5 withe the md5 checksum

Re: edgerouter 6 / rdomain at boot

hi Am 02.07.2018 um 09:24 schrieb Claudio Jeker: On Sun, Jul 01, 2018 at 06:26:04AM +0200, Holger Glaess wrote: hi normaly work this on intel , farin# cat /etc/hostname.lo2 rdomain 2 inet 127.0.0.1/8 This stopped working some time ago. Now lo2 is automatically created when rdomain 2

edgerouter 6 / rdomain at boot

hi normaly work this on intel , farin# cat /etc/hostname.lo2 rdomain 2 inet 127.0.0.1/8 !/sbin/route -n -T 2 exec /usr/sbin/ftp-proxy -D 7 !/sbin/route -n -T 2 add default 127.0.0.1 farin# cat /etc/hostname.cnmac3 rdomain 2 inet 192.168.132.252/24 up but if i boot the Edgerouter , i got

dhcrelay between rdomains

hi how can i forward the bootrequest from dhcrelay that listen in rdom 5 , example , to rdom 0 where my dhcpd server listen ? ist see the forwarded bootreqest from dhcrelay but it is not possible , for me , to shift this reqest to an other rdom . holger

Re: egdgerouter 6 and mp

hi solved i run in this problem https://an.undulating.space/post/171020-erl-openbsd-smp/ thanks for help holger Am 12.06.2018 um 16:29 schrieb Holger Glaess: hi sorry the numcores=4 missed by cut & paste now thw whole printenv ( sorry ) Octeon ubnt_e300(ram)# printenv autolo

Re: egdgerouter 6 and mp

018 - 17:14:38) Environment size: 1132/8188 bytes Am 12.06.2018 um 16:24 schrieb Peter J. Philipp: On Tue, Jun 12, 2018 at 03:08:49PM +0200, Holger Glaess wrote: hi hello, i bought the edgerouter 6 to play around wird openbsd 6.3 current. i install and boot current susccessful on a usb stic

egdgerouter 6 and mp

hi i bought the edgerouter 6 to play around wird openbsd 6.3 current. i install and boot current susccessful on a usb stick. my problem is that he only use one core. if i boot the boot the bsd.mp kernel by tftp , the system have 4 cores. my boot env Octeon ubnt_e300(ram)# printenv

Re: openbsd 63-eta and dhcpclient problem

09.03.2018 um 11:39 schrieb Peter Hessler: No need for the tcdump any more. I wanted to see if you were receiving the packets or not. If you're getting a lease, then clearly you're now receiving the packets. On 2018 Mar 09 (Fri) at 11:06:43 +0100 (+0100), Holger Glaess wrote: :hi : : :strange

Re: openbsd 63-eta and dhcpclient problem

hi strange i did the test again with booting the ubuntu cd , then i reboot to openbsd 6.3 since this time dhcp on re works . i did also an complete poweroff and reboot direkt to openbsd is works now . i dont  know why . i start to have this problem with an current version 6.2 from feb

Re: openbsd 63-eta and dhcpclient problem

:03:9a:b4:f6:48 via vlan100 Mar  9 10:05:38 furt dhcpd[72447]: DHCPOFFER on 192.168.131.101 to e8:03:9a:b4:f6:48 via vlan100 holger Am 09.03.2018 um 09:37 schrieb Peter Hessler: please include the output of "dhclient -vv re0" On 2018 Mar 09 (Fri) at 09:14:08 +0100 (+0100), Holger

openbsd 63-eta and dhcpclient problem

hi i have here an fresh installed openbsd 6.3-beta on an samsung ultrabook series 5 problem is the he don't get an ip address on his ethernet interface. i see on my dhcp server the request coming and he send an offer but the samsung diden't get it. if i boot an simple stupid ubuntu

Re: gre and ipsec

advice that you have care about enc interface an rdomain . holger Am 01.03.2018 um 20:21 schrieb Holger Glaess: hi i try to setup an gre tunnel with ipsec encryption on both sides are openbsd 6.2 stable with all patches if i run the gre tunnel plain without ipsec he is working as espected

gre and ipsec

hi i try to setup an gre tunnel with ipsec encryption on both sides are openbsd 6.2 stable with all patches if i run the gre tunnel plain without ipsec he is working as espected. if i enable the ipsec part , i see that the ipsec tunnel are negotiated , but the ping cant pass anymore the

slaacd / dhcp6c

hi i migrate the wwekend my home box from 6.1 to 6.2. all ist working as expected but not the ipv6 "part". under 6.1 i run toghter kernel pppoe with dhcp6v from wide-dhcp6 in a rdomain. i works well , the interface got an ipv6 ip an and an /64 prefix. the same combination is not working

Banana-Pi R2

hi it is possible to boot / install openbsd on the new Banana Pi Router 2 Board ? for more details take a look http://www.banana-pi.org/r2.html holger

Re: octeon port, ubiquity edgerouter

hi what about the hardware functions of the edgerouter description https://help.ubnt.com/hc/en-us/articles/115006567467-EdgeRouter-Hardware-Offloading-Explained holger > On Mon, Jul 24, 2017 at 07:21:36PM +0200, Peter J. Philipp wrote: >> > Now it would be very interesting to see dmesg

Re: PC-Engines Wireless - PPPOE timeouts.

hi what kind of DSL you have ( DSL or VDSL2 ) ? if you use VDSL2 is AUTO MTU Active ? ( Mother Interface have to be set to MTU 1508 , and no MTU Setting das the PPPOE Interface.) what says pfctl -si ( Line congestion ) what say sysctl -a | grep ifq ? holger > Stuart > > Thanks for the

Re: nat for ipv6 (RFC4193)

Am 09.09.2016 um 20:16 schrieb Stuart Henderson: On 2016/09/09 18:01, Holger Glaess wrote: On 2016-09-09, Holger Glaess <gla...@glaessixs.de> wrote: inet6 2001:4dd0:af15:483d:20d:48ff:fe26:7a1f -> prefixlen 64 autoconf pltime 559190 vltime 2546390 inet6 2001:4dd0:

Re: nat for ipv6 (RFC4193)

> On 2016-09-09, Holger Glaess <gla...@glaessixs.de> wrote: >> inet6 2001:4dd0:af15:483d:20d:48ff:fe26:7a1f -> prefixlen 64 >> autoconf pltime 559190 vltime 2546390 >> inet6 2001:4dd0:af15:cbd9:20d:48ff:fe26:7a1f -> prefixlen 64 >> autoconf

nat for ipv6 (RFC4193)

hi i work with 5.9stable i have an german dsl provider with dual stack slaac config. i use kernel pppoe # ifconfig pppoe0 pppoe0: flags=208951 rdomain 4 mtu 1500 priority: 0 dev: em3 state: session sid: 0x1c

Re: rdomain and dhcrelay

> Am 05/09/16 um 08:20 schrieb Holger Glaess: >> hi >> >> is there an possiblity to forward dhcp request from >> an rdomain X to the runing dhcp server in rdomain 0 ? >> >> >> if i start the dhcrelay -i em1 192.168.131.250, >> >> i s

rdomain and dhcrelay

hi is there an possiblity to forward dhcp request from an rdomain X to the runing dhcp server in rdomain 0 ? if i start the dhcrelay -i em1 192.168.131.250, i see that he forward the request but never reach the server. the clients in rdoamin 0 works with the dhcp server. or it is need to

bug in pair ?

hi i play around with pair with current 5.9 . what i dit # cat /etc/hostname.pair* inet 172.16.0.1 255.255.255.248 NONE rdomain 3 inet 172.16.0.2 255.255.255.248 NONE so i can ping now between rdoamin 0 and rdomain 3 because i dont patch the interface like the man page describe. bug ?

Re: current status of octeon support

> Holger Glaess [gla...@glaessixs.de] wrote: >> hi >> >> can some tell me what the status is for 5.9 octeon port ? >> >> is the usb port stable enough to handle an harddisk ? > > Yes although there may be more speed optimization possible > > hi w

current status of octeon support

hi can some tell me what the status is for 5.9 octeon port ? is the usb port stable enough to handle an harddisk ? thanks holger

Intel Ethernet with Bypass Function

hi i don't get an link at em0 and em1 there is an hardware bypass for the inerfaces. still exist an tool to control that function ? em2 and em3 are ok. holger # dmesg OpenBSD 5.8-current (GENERIC.MP) #1248: Sun Oct 4 14:14:25 MDT 2015

Re: rdomain 0 and dafault route

hostname.if contain rdomain and dhcp then set mygate ? Holger > On Tue, Oct 06, 2015 at 08:58:24AM +0200, Holger Glaess wrote: >> hi >> >> > On Tue, Oct 06, 2015 at 06:49:29AM +0200, Holger Glaess wrote: >> >> hi >> >> >> >> just a sim

Re: kernel panic

> On Fri, Oct 09, 2015 at 06:22:53AM +0200, Holger Glaess wrote: >> hi >> >> what kind of information you need more ? >> > > uhm. this machine is very very strange. It has devices I've never > seen before and many other devices not even recognized. Without acces

kernel panic

hi what kind of information you need more ? holger Stopped at 0:ehci0: unrecoverable error, controller halted panic: kernel diagnostic assertion "ci->ci_fpcurproc == p" failed: file "../../../../arch/i386/isa/npx.c", line 881 Stopped at Debugger+0x7: leave TIDPID

Re: rdomain 0 and dafault route

hi > On Tue, Oct 06, 2015 at 06:49:29AM +0200, Holger Glaess wrote: >> hi >> >> just a simple question >> >> how can i setup an kind of "default route" in rdomain 0 >> to , for example , rdomain 2. >> >> i have 3 rdomain >>

rdomain 0 and dafault route

hi just a simple question how can i setup an kind of "default route" in rdomain 0 to , for example , rdomain 2. i have 3 rdomain the default one one with the internet connection ( rdomain 1 ) one for my wlan ( rdomain 2 ) the routing between wlan to internet is still working( test "route -n

Re: pf_rules

Am 12.08.2015 um 22:07 schrieb Stuart Henderson: On 2015-08-12, Holger Glaess gla...@glaessixs.de wrote: hi i miss the option pf_rules= for rc.conf.local in current ( build today ) is this correct ? holger Yes, it was totally removed revision 1.449 date: 2015

pf_rules

hi i miss the option pf_rules= for rc.conf.local in current ( build today ) is this correct ? holger

Re: ipv6 kernel pppoe + slaac problem

Am 25.07.2015 um 16:35 schrieb Stuart Henderson: On 2015-07-25, Holger Glaess gla...@glaessixs.de wrote: # ifconfig pppoe0 pppoe0: flags=208851UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6 mtu 1492 priority: 0 dev: em2 state: session sid: 0x508f PADI retries

ipv6 kernel pppoe + slaac problem

hi i allready read the threads here in this list because my problem is similar but not the the same. the environment. dsl provider in germany NetCologne they offer an full working /64 ipv6 net through slaac config. i use an openbsd 5.8 beta 8 build a couple of day before ) physical

Re: not known intel ethernet card

hi so restart with a blank paper ;) i did an rm -r /usr/src then cd /usr cvs -qd anon...@ftp5.eu.openbsd.org:/cvs get -P src cd /usr/src/sys/dev patch -p1 /home/glaess/EP80579_debug.diff then i got some reject i modify all rejected files by hand ( with the missing lines ) cd

Re: not known intel ethernet card

--- SysAdm | SecOff | DS14145-RIPE| DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --- A mouse is a device used to point at the xterm you want to type in. On 17 kwi 2015, at 18:45, Holger Glaess gla

Re: not known intel ethernet card

Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet

Re: not known intel ethernet card

dms On Fri, 17 Apr 2015, Holger Glaess wrote: hi after build and boot the a patched kernel i see now the em interface but he show an eeprom error. see demsg Holger OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 root@DAF.rocki.intern:/usr/src/sys/arch/i386

Re: not known intel ethernet card

, Holger Glaess gla...@glaessixs.de wrote: hi looks good , but this unable to read is coming from not connected port ? Holger # dmesg | grep ^em em0 at pci1 dev 0 function 0 Intel 82574L rev 0x00: msi, address 00:14:b7:00:61:63 em1 at pci3 dev 0 function 0 Intel EP80579 LAN rev 0x01: apic 2 int 16

not known intel ethernet card

hi can help someone ? the 3 other intel ethernet card are also gigabit . holger # dmesg OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) processor 1.20GHz (GenuineIntel 686-class) 1.21

Re: not known intel ethernet card

to type in. On 16 kwi 2015, at 21:55, Dariusz Swiderski sfi...@sfires.net wrote: Hi, Sorry for the noise, fixed in latest builds. #784 works as expected for me on same hardware. Sent from my iPhone On 16 kwi 2015, at 20:31, Holger Glaess gla...@glaessixs.de wrote: Am 16.04.2015 um 20:21

Re: not known intel ethernet card

Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: Hi, Could you provide output of pcidump -v Sent from my iPhone On 16 kwi 2015, at 18:59, Holger Glaess gla...@glaessixs.de mailto:gla...@glaessixs.de wrote: hi can help someone ? the 3 other intel ethernet card are also gigabit

Re: bug in rdomain together with kernel pppoe

Am 31.03.2015 um 06:24 schrieb Holger Glaess: Am 30.03.2015 um 17:49 schrieb Martin Pieuchot: On 30/03/15(Mon) 17:21, Holger Glaess wrote: Am 29.03.2015 um 13:54 schrieb Martin Pieuchot: On 29/03/15(Sun) 12:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play

Re: bug in rdomain together with kernel pppoe

On 29/03/2015 13:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet 0.0.0.0 255.255.255.255 NONE \ pppoedev msk0

Re: bug in rdomain together with kernel pppoe

Am 07.04.2015 um 10:52 schrieb Pantelis Roditis: On 29/03/2015 13:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet

Re: bug in rdomain together with kernel pppoe

Am 31.03.2015 um 06:24 schrieb Holger Glaess: Am 30.03.2015 um 17:49 schrieb Martin Pieuchot: On 30/03/15(Mon) 17:21, Holger Glaess wrote: Am 29.03.2015 um 13:54 schrieb Martin Pieuchot: On 29/03/15(Sun) 12:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play

Re: bug in rdomain together with kernel pppoe

Am 29.03.2015 um 13:54 schrieb Martin Pieuchot: On 29/03/15(Sun) 12:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet

Re: bug in rdomain together with kernel pppoe

Am 30.03.2015 um 17:49 schrieb Martin Pieuchot: On 30/03/15(Mon) 17:21, Holger Glaess wrote: Am 29.03.2015 um 13:54 schrieb Martin Pieuchot: On 29/03/15(Sun) 12:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device

Re: bug in rdomain together with kernel pppoe

Am 30.03.2015 um 17:49 schrieb Martin Pieuchot: On 30/03/15(Mon) 17:21, Holger Glaess wrote: Am 29.03.2015 um 13:54 schrieb Martin Pieuchot: On 29/03/15(Sun) 12:56, Holger Glaess wrote: Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device

Re: bug in rdomain together with kernel pppoe

Am 24.03.2015 um 05:41 schrieb Holger Glaess: hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet 0.0.0.0 255.255.255.255 NONE \ pppoedev msk0 authproto pap \ authname 'foo@bar' authkey 'xyz' up

Re: bug in rdomain together with kernel pppoe

hi Am 24.03.2015 um 08:20 schrieb Claudio Jeker: On Tue, Mar 24, 2015 at 05:41:11AM +0100, Holger Glaess wrote: hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet 0.0.0.0 255.255.255.255 NONE

bug in rdomain together with kernel pppoe

hi i play a little bit with rdomain if add my pppoe device to rdomain 1 # cat /etc/hostname.pppoe0 rdomain 1 rtlabel netcologne inet6 autoconf inet 0.0.0.0 255.255.255.255 NONE \ pppoedev msk0 authproto pap \ authname 'foo@bar' authkey 'xyz' up dest 0.0.0.1 !/sbin/route -T 1 add default -ifp

rdomain enhancment

hi it is possible to add a feature for rdomain to do somthing like , for example route add 192.168.1.0/24 -T 0 insile of an rdomain , i look for an possibility like junipers virtual routing zones holger

Re: dhclient

/default/append commands for the relevant options? Would it apply to all members of each option, or route by route? If all else fails you can always use the ISC dhclient from ports to gain access to a dhclient-script again. Ken On 31 January 2014 02:04, Holger Glaess gla...@glaessixs.de wrote: Am

Re: Cisco routers

Am 31.01.2014 20:44, schrieb Matt M: This may not be the most appropriate place to ask, but I figured a lot of you are using Cisco on your networks. I am beginning to study for the CCNA and I want to purchase at least one Cisco router and a switch for a home lab. I don't want to spend a lot of

Re: dhclient

Am 30.01.2014 13:10, schrieb Giancarlo Razzolini: Em 29-01-2014 18:13, Holger Glaess escreveu: hi i try to setup and multipath configuration with 2 line provider 1 cable with dhcp(client) 1 with pppoe just dynamic ips. the pppoe config create well the new default route with -math

dhclient

hi i try to setup and multipath configuration with 2 line provider 1 cable with dhcp(client) 1 with pppoe just dynamic ips. the pppoe config create well the new default route with -math but dhclient dont. [snip pppoe config] inet 0.0.0.0 255.255.255.255 NONE \ pppoedev msk0 authproto pap \

ipv6 problem

hi my setup a multi home openbsd box a working sixxs tunnel with the endpoint openbsd forwarding for ipv4 and ipv6 is on a running rtadvd on re0 lan_if block rules for all interface exccept re0 ( lan_if ) for testing i use traceroute6.net outging ping6 and traceroute6 from the openbsd box

athn error

hi can someone help me about this error ? athn0: could not initialize calibration athn0: unable to reset hardware; reset status 60 dmesg OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Samuel 2

Re: kvm and Openbsd 5.1

Hi list, today I've installed OpenBSD 5.1 amd64 on a kvm (linux slackware) kvm version is 1.0.1. Starting machine with 4 core, and bsd.mp it crash. Disabling mpbios see only one core and not smp. Then, I've updated kvm to 1.1.1 but the results are the same. There is someone that has

pf-smp alpha on freebsd

hi i dident wont start about smp on openbsd but what about this porject ? [quote] Hello, networkers! [net@ in Cc, but further discussion should go on pf@] As you already probably know, or some may be don't yet know, the pf(4) subsystem in FreeBSD is currently working under a single mutex.

Re: Load balancing and fail-over

hi why you not try the relayd way ? look at http://gouloum.fr/doc/multilink.html the part with relayd holger On 2012/05/17 13:20, Indunil Jayasooriya wrote: Route lookups are based on the *destination* address not the source address, you could add a route for a certain destination

Re: athn0 (ar9227) trouble

hi nobody can help ? it is a brand new pci card . or should i return the card to the seller ? holger hi i get login: athn0: could not wakeup chip athn0: unable to reset hardware; reset status 60 if i do an ifconfig athn0 x.x.x.x y.y.y.y and at boot i get athn0: could not

Re: athn0 (ar9227) trouble

Hello, You should try with the most recent snapshot. Your machine's dmesg looks interesting, could you give some details about it and maybe the name of the supplier. Thanks hi its an old portwell box nar-2054 , i bought it used at ebay . similar box should be ( but more up to date

athn0 (ar9227) trouble

hi i get login: athn0: could not wakeup chip athn0: unable to reset hardware; reset status 60 if i do an ifconfig athn0 x.x.x.x y.y.y.y and at boot i get athn0: could not initialize calibration athn0: unable to reset hardware; reset status 60 ifconfig: SIOCAIFADDR: Connection timed out

  1   2   >