Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On 06/01/16(Wed) 10:17, Martin Pieuchot wrote:
> On 05/01/16(Tue) 13:19, Matt Adams wrote:
> > On 05/01/16 05:10 AM, Martin Pieuchot wrote:
> > >On 03/01/16(Sun) 23:18, Matt Adams wrote:
> > >>Hi,
> > >>
> > >>I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a
> > >>piece
> > >>of hardware that I have. However, ugen appears to attach to this device
> > >>instead of allowing the special firmware (installed via "# fw_install
> > >>uvideo") to configure /dev/video0 or /dev/video1, even though those two
> > >>device files are present in the system.
> > >>
> > >>For example:
> > >>
> > >>-bash-4.3$ luvcview
> > >>luvcview version 2.0
> > >>Video driver: x11
> > >>A window manager is available
> > >>video /dev/video0
> > >>ERROR opening V4L interface
> > >>: Device not configured
> > >>
> > >>Is there something that I am missing here or is my webcam not actually
> > >>supported?
> > >Could you paste the output of "lsusb -v" for your webcam? lsusb(1) is
> > >part of the usbutils package.
> >
> > lsusb -v as follows (webcam portion only):
> >
> > Bus 001 Device 002: ID 046d:08c5 Logitech, Inc. QuickCam Pro 5000
> > Device Descriptor:
> > bLength18
> > bDescriptorType 1
> > bcdUSB 2.00
> > bDeviceClass0 (Defined at Interface level)
> > bDeviceSubClass 0
> > bDeviceProtocol 1
> > bMaxPacketSize064
> > idVendor 0x046d Logitech, Inc.
> > idProduct 0x08c5 QuickCam Pro 5000
>
> Thanks, does the diff below help?
Could you test the diff? Does it work?
> Index: uvideo.c
> ===
> RCS file: /cvs/src/sys/dev/usb/uvideo.c,v
> retrieving revision 1.183
> diff -u -p -r1.183 uvideo.c
> --- uvideo.c 20 Dec 2015 10:08:05 - 1.183
> +++ uvideo.c 6 Jan 2016 09:14:05 -
> @@ -382,6 +382,12 @@ struct uvideo_devs {
> NULL,
> UVIDEO_FLAG_VENDOR_CLASS
> },
> + { /* Incorrectly reports as bInterfaceClass=UICLASS_VENDOR */
> + { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO5K_1 },
> + NULL,
> + NULL,
> + UVIDEO_FLAG_VENDOR_CLASS
> + },
> };
> #define uvideo_lookup(v, p) \
> ((struct uvideo_devs *)usb_lookup(uvideo_devs, v, p))
Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On 15/01/16 05:44 AM, Martin Pieuchot wrote: Could you test the diff? Does it work? I haven't had a chance but I will as soon as I can. Thanks! Matt
Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On 05/01/16(Tue) 13:19, Matt Adams wrote:
> On 05/01/16 05:10 AM, Martin Pieuchot wrote:
> >On 03/01/16(Sun) 23:18, Matt Adams wrote:
> >>Hi,
> >>
> >>I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a piece
> >>of hardware that I have. However, ugen appears to attach to this device
> >>instead of allowing the special firmware (installed via "# fw_install
> >>uvideo") to configure /dev/video0 or /dev/video1, even though those two
> >>device files are present in the system.
> >>
> >>For example:
> >>
> >>-bash-4.3$ luvcview
> >>luvcview version 2.0
> >>Video driver: x11
> >>A window manager is available
> >>video /dev/video0
> >>ERROR opening V4L interface
> >>: Device not configured
> >>
> >>Is there something that I am missing here or is my webcam not actually
> >>supported?
> >Could you paste the output of "lsusb -v" for your webcam? lsusb(1) is
> >part of the usbutils package.
>
> lsusb -v as follows (webcam portion only):
>
> Bus 001 Device 002: ID 046d:08c5 Logitech, Inc. QuickCam Pro 5000
> Device Descriptor:
> bLength18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 1
> bMaxPacketSize064
> idVendor 0x046d Logitech, Inc.
> idProduct 0x08c5 QuickCam Pro 5000
Thanks, does the diff below help?
Index: uvideo.c
===
RCS file: /cvs/src/sys/dev/usb/uvideo.c,v
retrieving revision 1.183
diff -u -p -r1.183 uvideo.c
--- uvideo.c20 Dec 2015 10:08:05 - 1.183
+++ uvideo.c6 Jan 2016 09:14:05 -
@@ -382,6 +382,12 @@ struct uvideo_devs {
NULL,
UVIDEO_FLAG_VENDOR_CLASS
},
+ { /* Incorrectly reports as bInterfaceClass=UICLASS_VENDOR */
+ { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO5K_1 },
+ NULL,
+ NULL,
+ UVIDEO_FLAG_VENDOR_CLASS
+ },
};
#define uvideo_lookup(v, p) \
((struct uvideo_devs *)usb_lookup(uvideo_devs, v, p))
Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On Mon, Jan 04, 2016 at 06:18:30AM GMT, Matt Adams wrote: > Hi, > > I noted that uvideo has support for the Logitech QuickCam Pro 5000 - > a piece of hardware that I have. However, ugen appears to attach to > this device instead of allowing the special firmware (installed via > "# fw_install uvideo") to configure /dev/video0 or /dev/video1, even > though those two device files are present in the system. Hi Matt, Logitech QuickCam Pro 5000 comes is two models: UVC and non-UVC[0]. Please verify that your camera is the V-UAX16[1], not the V-VAX16, model (P/N 861306) - I can't verify it based only on its USB Product ID as I'm not entirely sure whether it would differ between these two models. Regards, Raf [0] http://support.logitech.com/en_gb/product/quickcam-pro-5000 [1] http://support.logitech.com/en_gb/article/6471
Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On 05/01/16 05:10 AM, Martin Pieuchot wrote: On 03/01/16(Sun) 23:18, Matt Adams wrote: Hi, I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a piece of hardware that I have. However, ugen appears to attach to this device instead of allowing the special firmware (installed via "# fw_install uvideo") to configure /dev/video0 or /dev/video1, even though those two device files are present in the system. For example: -bash-4.3$ luvcview luvcview version 2.0 Video driver: x11 A window manager is available video /dev/video0 ERROR opening V4L interface : Device not configured Is there something that I am missing here or is my webcam not actually supported? Could you paste the output of "lsusb -v" for your webcam? lsusb(1) is part of the usbutils package. lsusb -v as follows (webcam portion only): Bus 001 Device 002: ID 046d:08c5 Logitech, Inc. QuickCam Pro 5000 Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 1 bMaxPacketSize064 idVendor 0x046d Logitech, Inc. idProduct 0x08c5 QuickCam Pro 5000 bcdDevice0.05 iManufacturer 0 iProduct0 iSerial 2 87C33093 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 1267 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass255 Vendor Specific Class bFunctionSubClass 3 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 0d 24 01 00 01 6a 00 00 6c dc 02 01 01 ** UNRECOGNIZED: 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 0e 00 00 ** UNRECOGNIZED: 0b 24 05 02 01 00 40 02 7b 17 00 ** UNRECOGNIZED: 1c 24 06 03 82 06 61 63 70 50 ab 49 b8 cc b3 85 5e 8d 22 1d 00 01 02 03 ff ff 1f 00 ** UNRECOGNIZED: 1b 24 06 04 82 06 61 63 70 50 ab 49 b8 cc b3 85 5e 8d 22 1e 00 01 03 02 7f 01 00 ** UNRECOGNIZED: 09 24 03 05 01 01 00 04 00 ** UNRECOGNIZED: 20 41 01 08 82 06 61 63 70 50 ab 49 b8 cc b3 85 5e 8d 22 51 03 01 04 03 19 00 00 00 00 00 00 00 ** UNRECOGNIZED: 20 41 01 0a 82 06 61 63 70 50 ab 49 b8 cc b3 85 5e 8d 22 52 01 01 04 03 00 40 00 00 00 00 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 8 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 10 24 01 03 a9 02 81 00 05 02 01 00 01 04 00 04 ** UNRECOGNIZED: 0b 24 06 01 09 01 03 00 00 00 00 ** UNRECOGNIZED: 32 24 07 01 00 a0 00 78 00 00 70 17 00 00 a0 8c 00 00 96 00 00 15 16 05 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 02 00 b0 00 90 00 00 f0 1e 00 00 a0 b9 00 00 c6 00 00 15 16 05 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 03 00 40 01 f0 00 00 c0 5d 00 00 80 32 02 00 58 02 00 2a 2c 0a 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 04 00 60 01 20 01 00 c0 7b 00 00 80 e6 02 00 18 03 00 15 16 05 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 05 00 b0 01 f0 00 00 90 7e 00 00 60 f7 02 00 2a 03 00 15 16 05 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 06 00 e0 01 68 01 00 f0 d2 00 00 a0 f1 04 00 46 05 00 15 16 05 00 06 15 16 05 00 80 1a 06 00 20 a1 07 00 2a 2c 0a 00 40 42 0f 00 80 84 1e 00 ** UNRECOGNIZED: 32 24 07 07 00 00 02 20 01 00 00 b4 00 00 00 38 04 00
Re: 5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
On 03/01/16(Sun) 23:18, Matt Adams wrote: > Hi, > > I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a piece > of hardware that I have. However, ugen appears to attach to this device > instead of allowing the special firmware (installed via "# fw_install > uvideo") to configure /dev/video0 or /dev/video1, even though those two > device files are present in the system. > > For example: > > -bash-4.3$ luvcview > luvcview version 2.0 > Video driver: x11 > A window manager is available > video /dev/video0 > ERROR opening V4L interface > : Device not configured > > Is there something that I am missing here or is my webcam not actually > supported? Could you paste the output of "lsusb -v" for your webcam? lsusb(1) is part of the usbutils package. > > -bash-4.3$ ls -l /dev/video* > lrwxr-xr-x 1 root wheel 6 Dec 24 00:09 /dev/video -> video0 > crw-rw-rw- 1 root wheel 44, 0 Dec 24 00:09 /dev/video0 > crw-rw-rw- 1 root wheel 44, 1 Dec 24 00:09 /dev/video1 > > Thanks, > > Matt > > -- usbdevs -v below > > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 addr 2: high speed, self powered, config 1, product 0x2514(0x2514), > Standard Microsystems(0x0424), rev 0.00 > port 1 powered > port 2 powered > port 4 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 addr 2: high speed, power 500 mA, config 1, QuickCam Pro > 5000(0x08c5), Logitech(0x046d), rev 0.05, iSerialNumber 87C33093 > port 6 powered > port 7 powered > port 8 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 addr 2: full speed, self powered, config 1, product 0x7000(0x7000), > ATEN International(0x0557), rev 1.00 > port 1 addr 3: low speed, power 100 mA, config 1, Type 6 Keyboard(0x0005), > Fujitsu Component(0x0430), rev 1.02 > port 2 powered > port 3 powered > port 4 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 addr 2: low speed, self powered, config 1, Back-UPS RS 1300 LCD > FW:838.H5 .D USB FW:H5(0x0002), American Power Conversion(0x051d), rev 1.01, > iSerialNumber JB0721002454 > Controller /dev/usb7: > addr 1: full speed, self powered, config 1, UHCI root hub(0x), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > > > -- dmesg below > > OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 25739890688 (24547MB) > avail mem = 24955904000 (23799MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (85 entries) > bios0: vendor Dell Inc. version "6.4.0" date 07/23/2013 > bios0: Dell Inc. PowerEdge T710 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WD__ SLIC ERST HEST BERT > EINJ SRAT TCPA SSDT > acpi0: wakeup devices PCI0(S5) PCI1(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.46 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 132MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor)
5.8: uvideo has support for Logitech QuickCam Pro 5000 but ugen0 attaches instead
Hi, I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a piece of hardware that I have. However, ugen appears to attach to this device instead of allowing the special firmware (installed via "# fw_install uvideo") to configure /dev/video0 or /dev/video1, even though those two device files are present in the system. For example: -bash-4.3$ luvcview luvcview version 2.0 Video driver: x11 A window manager is available video /dev/video0 ERROR opening V4L interface : Device not configured Is there something that I am missing here or is my webcam not actually supported? -bash-4.3$ ls -l /dev/video* lrwxr-xr-x 1 root wheel 6 Dec 24 00:09 /dev/video -> video0 crw-rw-rw- 1 root wheel 44, 0 Dec 24 00:09 /dev/video0 crw-rw-rw- 1 root wheel 44, 1 Dec 24 00:09 /dev/video1 Thanks, Matt -- usbdevs -v below Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 addr 2: high speed, self powered, config 1, product 0x2514(0x2514), Standard Microsystems(0x0424), rev 0.00 port 1 powered port 2 powered port 4 powered Controller /dev/usb1: addr 1: high speed, self powered, config 1, EHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 addr 2: high speed, power 500 mA, config 1, QuickCam Pro 5000(0x08c5), Logitech(0x046d), rev 0.05, iSerialNumber 87C33093 port 6 powered port 7 powered port 8 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, product 0x7000(0x7000), ATEN International(0x0557), rev 1.00 port 1 addr 3: low speed, power 100 mA, config 1, Type 6 Keyboard(0x0005), Fujitsu Component(0x0430), rev 1.02 port 2 powered port 3 powered port 4 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb6: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 addr 2: low speed, self powered, config 1, Back-UPS RS 1300 LCD FW:838.H5 .D USB FW:H5(0x0002), American Power Conversion(0x051d), rev 1.01, iSerialNumber JB0721002454 Controller /dev/usb7: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 port 1 powered port 2 powered -- dmesg below OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 25739890688 (24547MB) avail mem = 24955904000 (23799MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (85 entries) bios0: vendor Dell Inc. version "6.4.0" date 07/23/2013 bios0: Dell Inc. PowerEdge T710 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WD__ SLIC ERST HEST BERT EINJ SRAT TCPA SSDT acpi0: wakeup devices PCI0(S5) PCI1(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.46 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 132MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache
