Re: Hard disk controller not recognized

[Xianwen Chen]

Dear Tom,

Booting from a USB dongle works! Thank you!

Yours sincerely,
Xianwen

On Thu, Feb 22, 2018 at 2:37 AM, Tom Smyth 
mailto:tom.sm...@wirelessconnect.eu>> wrote:
Hi Xianwen,

if you try with the USB Boot device...  you can see if you can load it .

then I suggest you get a compact low profiile USB key  so that it
doenst snag on your bag when putting
the laptop back in the case
Tom

On 22 February 2018 at 02:11, Xianwen Chen 
mailto:xianwen.c...@nina.no>> wrote:
> Dear Steve,
>
> I agree! Thank you for the advice!
>
> Yours sincerely,
> Xianwen
>
> On Mon, Feb 12, 2018 at 11:27 PM, STeve Andre' 
> mailto:and...@msu.edu>>>
>  wrote:
>
>
> On 02/12/18 12:07, Xianwen Chen wrote:
> Dear OpenBSD users,
>
> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> installation was done by taking out the hard drive and hook it through
> a USB reader to another machine.
>
> I boot the hard drive through Legacy Boot menu. The boot process stops with
> root device:
>
> It is possible to boot through bsd.rd. However, the hard drive is not
> recognized there.
>
> Here is the dmesg from bsd.rd:
> [snip]
>
> Xianwen,
>
> Obviously the best thing is for IT to release the BIOS control to you,
> but if they won't, get a USB SATA disk interface, and try to use that.
> Your IT department might have figured out how to interfere with that too, but 
> that might be a solution.  You'd have to keep that external disk and its 
> interface with you, but at least you could use OpenBSD.
>
> --STeve Andre'
>



--
Kindest regards,
Tom Smyth

Mobile: +353 87 6193172
The information contained in this E-mail is intended only for the
confidential use of the named recipient. If the reader of this message
is not the intended recipient or the person responsible for
delivering it to the recipient, you are hereby notified that you have
received this communication in error and that any review,
dissemination or copying of this communication is strictly prohibited.
If you have received this in error, please notify the sender
immediately by telephone at the number above and erase the message
You are requested to carry out your own virus check before
opening any attachment.

Re: Hard disk controller not recognized

[Tom Smyth]

Hi Xianwen,

if you try with the USB Boot device...  you can see if you can load it .

then I suggest you get a compact low profiile USB key  so that it
doenst snag on your bag when putting
the laptop back in the case
Tom

On 22 February 2018 at 02:11, Xianwen Chen  wrote:
> Dear Steve,
>
> I agree! Thank you for the advice!
>
> Yours sincerely,
> Xianwen
>
> On Mon, Feb 12, 2018 at 11:27 PM, STeve Andre' 
> mailto:and...@msu.edu>> wrote:
>
>
> On 02/12/18 12:07, Xianwen Chen wrote:
> Dear OpenBSD users,
>
> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> installation was done by taking out the hard drive and hook it through
> a USB reader to another machine.
>
> I boot the hard drive through Legacy Boot menu. The boot process stops with
> root device:
>
> It is possible to boot through bsd.rd. However, the hard drive is not
> recognized there.
>
> Here is the dmesg from bsd.rd:
> [snip]
>
> Xianwen,
>
> Obviously the best thing is for IT to release the BIOS control to you,
> but if they won't, get a USB SATA disk interface, and try to use that.
> Your IT department might have figured out how to interfere with that too, but 
> that might be a solution.  You'd have to keep that external disk and its 
> interface with you, but at least you could use OpenBSD.
>
> --STeve Andre'
>



-- 
Kindest regards,
Tom Smyth

Mobile: +353 87 6193172
The information contained in this E-mail is intended only for the
confidential use of the named recipient. If the reader of this message
is not the intended recipient or the person responsible for
delivering it to the recipient, you are hereby notified that you have
received this communication in error and that any review,
dissemination or copying of this communication is strictly prohibited.
If you have received this in error, please notify the sender
immediately by telephone at the number above and erase the message
You are requested to carry out your own virus check before
opening any attachment.

Re: Hard disk controller not recognized

[Xianwen Chen]

Dear Steve,

I agree! Thank you for the advice!

Yours sincerely,
Xianwen

On Mon, Feb 12, 2018 at 11:27 PM, STeve Andre' 
mailto:and...@msu.edu>> wrote:


On 02/12/18 12:07, Xianwen Chen wrote:
Dear OpenBSD users,

I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
installation was done by taking out the hard drive and hook it through
a USB reader to another machine.

I boot the hard drive through Legacy Boot menu. The boot process stops with
root device:

It is possible to boot through bsd.rd. However, the hard drive is not
recognized there.

Here is the dmesg from bsd.rd:
[snip]

Xianwen,

Obviously the best thing is for IT to release the BIOS control to you,
but if they won't, get a USB SATA disk interface, and try to use that.
Your IT department might have figured out how to interfere with that too, but 
that might be a solution.  You'd have to keep that external disk and its 
interface with you, but at least you could use OpenBSD.

--STeve Andre'

Re: Hard disk controller not recognized

[STeve Andre']

On 02/12/18 12:07, Xianwen Chen wrote:

Dear OpenBSD users,

I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
installation was done by taking out the hard drive and hook it through
a USB reader to another machine.

I boot the hard drive through Legacy Boot menu. The boot process stops with
root device:

It is possible to boot through bsd.rd. However, the hard drive is not
recognized there.

Here is the dmesg from bsd.rd:

[snip]

Xianwen,

Obviously the best thing is for IT to release the BIOS control to you,
but if they won't, get a USB SATA disk interface, and try to use that.
Your IT department might have figured out how to interfere with that 
too, but that might be a solution.  You'd have to keep that external 
disk and its interface with you, but at least you could use OpenBSD.


--STeve Andre'

Re: Hard disk controller not recognized

[Xianwen Chen]

Dear Mestre,

Thank you. I agree!

Sincerely,
Xianwen

On 2/12/18, Ricardo Mestre 
 wrote:
> Hi Xianwen,
>
> I guess this is one of "you're-on-your-own" cases, the BIOS being locked by
> IT I'm even surprised you're allowed to install a different OS on the
> machine.
>
> For starters I'd speak directly with them and check what are you allowed or
> not to do with the machine.
>
> /mestre
>
> On Monday, 12 February 2018, Xianwen Chen wrote:
>> Dear Mike,
>>
>> From the output of dmesg, I guess so. The BIOS is locked by IT
>> administrators. Is there some way that I can use OpenBSD while the
>> controller is set to RAID mode?
>>
>> Sincerely,
>> Xianwen
>>
>> On 2/12/18, Mike Larkin  wrote:
>> > On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
>> >> Dear OpenBSD users,
>> >>
>> >> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
>> >> installation was done by taking out the hard drive and hook it through
>> >> a USB reader to another machine.
>> >>
>> >> I boot the hard drive through Legacy Boot menu. The boot process stops
>> >> with
>> >> root device:
>> >>
>> >> It is possible to boot through bsd.rd. However, the hard drive is not
>> >> recognized there.
>> >>
>> >> Here is the dmesg from bsd.rd:
>> >>
>> >> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
>> >>
>> >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>> >> real mem = 17064423424 (16273MB)
>> >> avail mem = 16543502336 (15777MB)
>> >> mainbus0 at root
>> >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
>> >> bios0: vendor Dell Inc. version "A16" date 01/18/2016
>> >> bios0: Dell Inc. Latitude E6330
>> >> acpi0 at bios0: rev 2
>> >> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
>> >> ASF! SSDT SLIC BGRT
>> >> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
>> >> cpu0 at mainbus0: apid 0 (boot processor)
>> >> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
>> >> cpu0:
>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>> >> cpu0: 256KB 64b/line 8-way L2 cache
>> >> cpu0: TSC frequency 2891029960 Hz
>> >> cpu0: apic clock running at 99MHz
>> >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
>> >> cpu at mainbus0: not configured
>> >> cpu at mainbus0: not configured
>> >> cpu at mainbus0: not configured
>> >> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
>> >> acpiprt0 at acpi0: bus 0 (PCI0)
>> >> acpiprt1 at acpi0: bus -1 (P0P1)
>> >> acpiprt2 at acpi0: bus 1 (RP01)
>> >> acpiprt3 at acpi0: bus 2 (RP02)
>> >> acpiprt4 at acpi0: bus -1 (RP05)
>> >> acpiprt5 at acpi0: bus 11 (RP06)
>> >> acpiprt6 at acpi0: bus -1 (RP07)
>> >> acpiprt7 at acpi0: bus -1 (RP08)
>> >> acpiprt8 at acpi0: bus -1 (PEG0)
>> >> acpiprt9 at acpi0: bus -1 (PEG1)
>> >> acpiprt10 at acpi0: bus -1 (PEG2)
>> >> acpiprt11 at acpi0: bus -1 (PEG3)
>> >> acpiprt12 at acpi0: bus 3 (RP03)
>> >> acpiprt13 at acpi0: bus 7 (RP04)
>> >> acpiec0 at acpi0
>> >> acpicpu at acpi0 not configured
>> >> acpitz at acpi0 not configured
>> >> "INT3F0D" at acpi0 not configured
>> >> "DLLK0533" at acpi0 not configured
>> >> "DLL0533" at acpi0 not configured
>> >> "PNP0401" at acpi0 not configured
>> >> "SMO8810" at acpi0 not configured
>> >> "*pnp0c14" at acpi0 not configured
>> >> "PNP0C0D" at acpi0 not configured
>> >> "PNP0C0C" at acpi0 not configured
>> >> "PNP0C0E" at acpi0 not configured
>> >> "ACPI0003" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "DELLABCE" at acpi0 not configured
>> >> "PNP0C31" at acpi0 not configured
>> >> pci0 at mainbus0 bus 0
>> >> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
>> >> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
>> >> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
>> >> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
>> >> usb0 at xhci0: USB revision 3.0
>> >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>> >> 3.00/1.00 addr 1
>> >> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
>> >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
>> >> b8:ca:3a:d8:5f:2e
>> >> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2
>> >> int
>> >> 16
>> >> usb1 at ehci0: USB revision 2.0
>> >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>> >> 2.00/1.00 addr 1
>> >> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not
>> >> configured
>> >> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
>> >> pci1 at ppb0 bus 1
>> >> ppb1 at pci0 dev 28 function 1 "Intel 7 Series P

Re: Hard disk controller not recognized

[Xianwen Chen]

Dear Peter,

Thank you. There is probably such an option in BIOS. Unfortunately I
do not have access to BIOS at the moment, because it is locked by
administrators of my IT department.

Sincerely,
Xianwen

On 2/12/18, Peter N. M. Hansteen  wrote:
> On 02/12/18 18:07, Xianwen Chen wrote:
>> Dear OpenBSD users,
>>
>> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
>> installation was done by taking out the hard drive and hook it through
>> a USB reader to another machine.
>>
>> I boot the hard drive through Legacy Boot menu. The boot process stops
>> with
>> root device:
>>
>> It is possible to boot through bsd.rd. However, the hard drive is not
>> recognized there.
>
> I'm guessing that for some reason or the other the controller is set to
> 'hardware raid' mode (which OpenBSD does not support) instead of a more
> useful SATA mode:
>
>> pciide0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: DMA,
>> channel 0 wired to native-PCI, channel 1 wired to native-PCI
>> pciide0: using apic 2 int 19 for native-PCI interrupt
>
> See if the BIOS offers a choice of modes for the controller, hopefully
> there is a SATA option.
>
> - Peter
>
> --
> Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
> "Remember to set the evil bit on all malicious network traffic"
> delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
>

Re: Hard disk controller not recognized

[Xianwen Chen]

Thank you Mike!

Sincerely,
Xianwen

On 2/12/18, Mike Larkin  wrote:
> On Mon, Feb 12, 2018 at 05:25:57PM +, Xianwen Chen wrote:
>> Dear Mike,
>>
>> >From the output of dmesg, I guess so. The BIOS is locked by IT
>> administrators. Is there some way that I can use OpenBSD while the
>> controller is set to RAID mode?
>>
>> Sincerely,
>> Xianwen
>>
>
> not that I know of
>
>> On 2/12/18, Mike Larkin  wrote:
>> > On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
>> >> Dear OpenBSD users,
>> >>
>> >> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
>> >> installation was done by taking out the hard drive and hook it through
>> >> a USB reader to another machine.
>> >>
>> >> I boot the hard drive through Legacy Boot menu. The boot process stops
>> >> with
>> >> root device:
>> >>
>> >> It is possible to boot through bsd.rd. However, the hard drive is not
>> >> recognized there.
>> >>
>> >> Here is the dmesg from bsd.rd:
>> >>
>> >> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
>> >>
>> >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>> >> real mem = 17064423424 (16273MB)
>> >> avail mem = 16543502336 (15777MB)
>> >> mainbus0 at root
>> >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
>> >> bios0: vendor Dell Inc. version "A16" date 01/18/2016
>> >> bios0: Dell Inc. Latitude E6330
>> >> acpi0 at bios0: rev 2
>> >> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
>> >> ASF! SSDT SLIC BGRT
>> >> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
>> >> cpu0 at mainbus0: apid 0 (boot processor)
>> >> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
>> >> cpu0:
>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>> >> cpu0: 256KB 64b/line 8-way L2 cache
>> >> cpu0: TSC frequency 2891029960 Hz
>> >> cpu0: apic clock running at 99MHz
>> >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
>> >> cpu at mainbus0: not configured
>> >> cpu at mainbus0: not configured
>> >> cpu at mainbus0: not configured
>> >> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
>> >> acpiprt0 at acpi0: bus 0 (PCI0)
>> >> acpiprt1 at acpi0: bus -1 (P0P1)
>> >> acpiprt2 at acpi0: bus 1 (RP01)
>> >> acpiprt3 at acpi0: bus 2 (RP02)
>> >> acpiprt4 at acpi0: bus -1 (RP05)
>> >> acpiprt5 at acpi0: bus 11 (RP06)
>> >> acpiprt6 at acpi0: bus -1 (RP07)
>> >> acpiprt7 at acpi0: bus -1 (RP08)
>> >> acpiprt8 at acpi0: bus -1 (PEG0)
>> >> acpiprt9 at acpi0: bus -1 (PEG1)
>> >> acpiprt10 at acpi0: bus -1 (PEG2)
>> >> acpiprt11 at acpi0: bus -1 (PEG3)
>> >> acpiprt12 at acpi0: bus 3 (RP03)
>> >> acpiprt13 at acpi0: bus 7 (RP04)
>> >> acpiec0 at acpi0
>> >> acpicpu at acpi0 not configured
>> >> acpitz at acpi0 not configured
>> >> "INT3F0D" at acpi0 not configured
>> >> "DLLK0533" at acpi0 not configured
>> >> "DLL0533" at acpi0 not configured
>> >> "PNP0401" at acpi0 not configured
>> >> "SMO8810" at acpi0 not configured
>> >> "*pnp0c14" at acpi0 not configured
>> >> "PNP0C0D" at acpi0 not configured
>> >> "PNP0C0C" at acpi0 not configured
>> >> "PNP0C0E" at acpi0 not configured
>> >> "ACPI0003" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "PNP0C0A" at acpi0 not configured
>> >> "DELLABCE" at acpi0 not configured
>> >> "PNP0C31" at acpi0 not configured
>> >> pci0 at mainbus0 bus 0
>> >> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
>> >> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
>> >> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
>> >> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
>> >> usb0 at xhci0: USB revision 3.0
>> >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>> >> 3.00/1.00 addr 1
>> >> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
>> >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
>> >> b8:ca:3a:d8:5f:2e
>> >> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2
>> >> int
>> >> 16
>> >> usb1 at ehci0: USB revision 2.0
>> >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>> >> 2.00/1.00 addr 1
>> >> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not
>> >> configured
>> >> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
>> >> pci1 at ppb0 bus 1
>> >> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
>> >> pci2 at ppb1 bus 2
>> >> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
>> >> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
>> >> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
>> >> pci3 at ppb2 bus 3
>> >> ppb3

Re: Hard disk controller not recognized

[Ricardo Mestre]

Hi Xianwen,

I guess this is one of "you're-on-your-own" cases, the BIOS being locked by IT 
I'm even surprised you're allowed to install a different OS on the machine.

For starters I'd speak directly with them and check what are you allowed or not 
to do with the machine.

/mestre 

On Monday, 12 February 2018, Xianwen Chen wrote:
> Dear Mike,
> 
> From the output of dmesg, I guess so. The BIOS is locked by IT
> administrators. Is there some way that I can use OpenBSD while the
> controller is set to RAID mode?
> 
> Sincerely,
> Xianwen
> 
> On 2/12/18, Mike Larkin  wrote:
> > On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
> >> Dear OpenBSD users,
> >>
> >> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> >> installation was done by taking out the hard drive and hook it through
> >> a USB reader to another machine.
> >>
> >> I boot the hard drive through Legacy Boot menu. The boot process stops
> >> with
> >> root device:
> >>
> >> It is possible to boot through bsd.rd. However, the hard drive is not
> >> recognized there.
> >>
> >> Here is the dmesg from bsd.rd:
> >>
> >> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
> >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> >> real mem = 17064423424 (16273MB)
> >> avail mem = 16543502336 (15777MB)
> >> mainbus0 at root
> >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
> >> bios0: vendor Dell Inc. version "A16" date 01/18/2016
> >> bios0: Dell Inc. Latitude E6330
> >> acpi0 at bios0: rev 2
> >> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
> >> ASF! SSDT SLIC BGRT
> >> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> >> cpu0 at mainbus0: apid 0 (boot processor)
> >> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
> >> cpu0:
> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> >> cpu0: 256KB 64b/line 8-way L2 cache
> >> cpu0: TSC frequency 2891029960 Hz
> >> cpu0: apic clock running at 99MHz
> >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> >> cpu at mainbus0: not configured
> >> cpu at mainbus0: not configured
> >> cpu at mainbus0: not configured
> >> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
> >> acpiprt0 at acpi0: bus 0 (PCI0)
> >> acpiprt1 at acpi0: bus -1 (P0P1)
> >> acpiprt2 at acpi0: bus 1 (RP01)
> >> acpiprt3 at acpi0: bus 2 (RP02)
> >> acpiprt4 at acpi0: bus -1 (RP05)
> >> acpiprt5 at acpi0: bus 11 (RP06)
> >> acpiprt6 at acpi0: bus -1 (RP07)
> >> acpiprt7 at acpi0: bus -1 (RP08)
> >> acpiprt8 at acpi0: bus -1 (PEG0)
> >> acpiprt9 at acpi0: bus -1 (PEG1)
> >> acpiprt10 at acpi0: bus -1 (PEG2)
> >> acpiprt11 at acpi0: bus -1 (PEG3)
> >> acpiprt12 at acpi0: bus 3 (RP03)
> >> acpiprt13 at acpi0: bus 7 (RP04)
> >> acpiec0 at acpi0
> >> acpicpu at acpi0 not configured
> >> acpitz at acpi0 not configured
> >> "INT3F0D" at acpi0 not configured
> >> "DLLK0533" at acpi0 not configured
> >> "DLL0533" at acpi0 not configured
> >> "PNP0401" at acpi0 not configured
> >> "SMO8810" at acpi0 not configured
> >> "*pnp0c14" at acpi0 not configured
> >> "PNP0C0D" at acpi0 not configured
> >> "PNP0C0C" at acpi0 not configured
> >> "PNP0C0E" at acpi0 not configured
> >> "ACPI0003" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "DELLABCE" at acpi0 not configured
> >> "PNP0C31" at acpi0 not configured
> >> pci0 at mainbus0 bus 0
> >> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> >> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> >> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> >> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> >> usb0 at xhci0: USB revision 3.0
> >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> >> 3.00/1.00 addr 1
> >> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> >> b8:ca:3a:d8:5f:2e
> >> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int
> >> 16
> >> usb1 at ehci0: USB revision 2.0
> >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> >> 2.00/1.00 addr 1
> >> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not
> >> configured
> >> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci1 at ppb0 bus 1
> >> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci2 at ppb1 bus 2
> >> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
> >> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
> >> ppb2 at pci0 dev 28 function 2 "Intel 

Re: Hard disk controller not recognized

[Mike Larkin]

On Mon, Feb 12, 2018 at 05:25:57PM +, Xianwen Chen wrote:
> Dear Mike,
> 
> >From the output of dmesg, I guess so. The BIOS is locked by IT
> administrators. Is there some way that I can use OpenBSD while the
> controller is set to RAID mode?
> 
> Sincerely,
> Xianwen
> 

not that I know of

> On 2/12/18, Mike Larkin  wrote:
> > On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
> >> Dear OpenBSD users,
> >>
> >> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> >> installation was done by taking out the hard drive and hook it through
> >> a USB reader to another machine.
> >>
> >> I boot the hard drive through Legacy Boot menu. The boot process stops
> >> with
> >> root device:
> >>
> >> It is possible to boot through bsd.rd. However, the hard drive is not
> >> recognized there.
> >>
> >> Here is the dmesg from bsd.rd:
> >>
> >> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
> >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> >> real mem = 17064423424 (16273MB)
> >> avail mem = 16543502336 (15777MB)
> >> mainbus0 at root
> >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
> >> bios0: vendor Dell Inc. version "A16" date 01/18/2016
> >> bios0: Dell Inc. Latitude E6330
> >> acpi0 at bios0: rev 2
> >> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
> >> ASF! SSDT SLIC BGRT
> >> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> >> cpu0 at mainbus0: apid 0 (boot processor)
> >> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
> >> cpu0:
> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> >> cpu0: 256KB 64b/line 8-way L2 cache
> >> cpu0: TSC frequency 2891029960 Hz
> >> cpu0: apic clock running at 99MHz
> >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> >> cpu at mainbus0: not configured
> >> cpu at mainbus0: not configured
> >> cpu at mainbus0: not configured
> >> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
> >> acpiprt0 at acpi0: bus 0 (PCI0)
> >> acpiprt1 at acpi0: bus -1 (P0P1)
> >> acpiprt2 at acpi0: bus 1 (RP01)
> >> acpiprt3 at acpi0: bus 2 (RP02)
> >> acpiprt4 at acpi0: bus -1 (RP05)
> >> acpiprt5 at acpi0: bus 11 (RP06)
> >> acpiprt6 at acpi0: bus -1 (RP07)
> >> acpiprt7 at acpi0: bus -1 (RP08)
> >> acpiprt8 at acpi0: bus -1 (PEG0)
> >> acpiprt9 at acpi0: bus -1 (PEG1)
> >> acpiprt10 at acpi0: bus -1 (PEG2)
> >> acpiprt11 at acpi0: bus -1 (PEG3)
> >> acpiprt12 at acpi0: bus 3 (RP03)
> >> acpiprt13 at acpi0: bus 7 (RP04)
> >> acpiec0 at acpi0
> >> acpicpu at acpi0 not configured
> >> acpitz at acpi0 not configured
> >> "INT3F0D" at acpi0 not configured
> >> "DLLK0533" at acpi0 not configured
> >> "DLL0533" at acpi0 not configured
> >> "PNP0401" at acpi0 not configured
> >> "SMO8810" at acpi0 not configured
> >> "*pnp0c14" at acpi0 not configured
> >> "PNP0C0D" at acpi0 not configured
> >> "PNP0C0C" at acpi0 not configured
> >> "PNP0C0E" at acpi0 not configured
> >> "ACPI0003" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "PNP0C0A" at acpi0 not configured
> >> "DELLABCE" at acpi0 not configured
> >> "PNP0C31" at acpi0 not configured
> >> pci0 at mainbus0 bus 0
> >> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> >> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> >> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> >> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> >> usb0 at xhci0: USB revision 3.0
> >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> >> 3.00/1.00 addr 1
> >> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> >> b8:ca:3a:d8:5f:2e
> >> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int
> >> 16
> >> usb1 at ehci0: USB revision 2.0
> >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> >> 2.00/1.00 addr 1
> >> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not
> >> configured
> >> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci1 at ppb0 bus 1
> >> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci2 at ppb1 bus 2
> >> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
> >> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
> >> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci3 at ppb2 bus 3
> >> ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci4 at ppb3 bus 7
> >> ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi
> >> pci5 at ppb4 bus 11
> >> 

Re: Hard disk controller not recognized

[Xianwen Chen]

Dear Mike,

>From the output of dmesg, I guess so. The BIOS is locked by IT
administrators. Is there some way that I can use OpenBSD while the
controller is set to RAID mode?

Sincerely,
Xianwen

On 2/12/18, Mike Larkin  wrote:
> On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
>> Dear OpenBSD users,
>>
>> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
>> installation was done by taking out the hard drive and hook it through
>> a USB reader to another machine.
>>
>> I boot the hard drive through Legacy Boot menu. The boot process stops
>> with
>> root device:
>>
>> It is possible to boot through bsd.rd. However, the hard drive is not
>> recognized there.
>>
>> Here is the dmesg from bsd.rd:
>>
>> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>> real mem = 17064423424 (16273MB)
>> avail mem = 16543502336 (15777MB)
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
>> bios0: vendor Dell Inc. version "A16" date 01/18/2016
>> bios0: Dell Inc. Latitude E6330
>> acpi0 at bios0: rev 2
>> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
>> ASF! SSDT SLIC BGRT
>> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
>> cpu0:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: TSC frequency 2891029960 Hz
>> cpu0: apic clock running at 99MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus -1 (P0P1)
>> acpiprt2 at acpi0: bus 1 (RP01)
>> acpiprt3 at acpi0: bus 2 (RP02)
>> acpiprt4 at acpi0: bus -1 (RP05)
>> acpiprt5 at acpi0: bus 11 (RP06)
>> acpiprt6 at acpi0: bus -1 (RP07)
>> acpiprt7 at acpi0: bus -1 (RP08)
>> acpiprt8 at acpi0: bus -1 (PEG0)
>> acpiprt9 at acpi0: bus -1 (PEG1)
>> acpiprt10 at acpi0: bus -1 (PEG2)
>> acpiprt11 at acpi0: bus -1 (PEG3)
>> acpiprt12 at acpi0: bus 3 (RP03)
>> acpiprt13 at acpi0: bus 7 (RP04)
>> acpiec0 at acpi0
>> acpicpu at acpi0 not configured
>> acpitz at acpi0 not configured
>> "INT3F0D" at acpi0 not configured
>> "DLLK0533" at acpi0 not configured
>> "DLL0533" at acpi0 not configured
>> "PNP0401" at acpi0 not configured
>> "SMO8810" at acpi0 not configured
>> "*pnp0c14" at acpi0 not configured
>> "PNP0C0D" at acpi0 not configured
>> "PNP0C0C" at acpi0 not configured
>> "PNP0C0E" at acpi0 not configured
>> "ACPI0003" at acpi0 not configured
>> "PNP0C0A" at acpi0 not configured
>> "PNP0C0A" at acpi0 not configured
>> "PNP0C0A" at acpi0 not configured
>> "DELLABCE" at acpi0 not configured
>> "PNP0C31" at acpi0 not configured
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
>> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
>> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
>> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>> 3.00/1.00 addr 1
>> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
>> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
>> b8:ca:3a:d8:5f:2e
>> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int
>> 16
>> usb1 at ehci0: USB revision 2.0
>> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>> 2.00/1.00 addr 1
>> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not
>> configured
>> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
>> pci1 at ppb0 bus 1
>> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
>> pci2 at ppb1 bus 2
>> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
>> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
>> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
>> pci3 at ppb2 bus 3
>> ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
>> pci4 at ppb3 bus 7
>> ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi
>> pci5 at ppb4 bus 11
>> sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product
>> 0x8221 rev 0x05: apic 2 int 17
>> sdhc0: SDHC 2.0, 50 MHz base clock
>> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
>> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int
>> 21
>> usb2 at ehci1: USB revi

Re: Hard disk controller not recognized

[Peter N. M. Hansteen]

On 02/12/18 18:07, Xianwen Chen wrote:
> Dear OpenBSD users,
> 
> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> installation was done by taking out the hard drive and hook it through
> a USB reader to another machine.
> 
> I boot the hard drive through Legacy Boot menu. The boot process stops with
> root device:
> 
> It is possible to boot through bsd.rd. However, the hard drive is not
> recognized there.

I'm guessing that for some reason or the other the controller is set to
'hardware raid' mode (which OpenBSD does not support) instead of a more
useful SATA mode:

> pciide0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt

See if the BIOS offers a choice of modes for the controller, hopefully
there is a SATA option.

- Peter

-- 
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

Re: Hard disk controller not recognized

[Mike Larkin]

On Mon, Feb 12, 2018 at 05:07:15PM +, Xianwen Chen wrote:
> Dear OpenBSD users,
> 
> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
> installation was done by taking out the hard drive and hook it through
> a USB reader to another machine.
> 
> I boot the hard drive through Legacy Boot menu. The boot process stops with
> root device:
> 
> It is possible to boot through bsd.rd. However, the hard drive is not
> recognized there.
> 
> Here is the dmesg from bsd.rd:
> 
> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 17064423424 (16273MB)
> avail mem = 16543502336 (15777MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
> bios0: vendor Dell Inc. version "A16" date 01/18/2016
> bios0: Dell Inc. Latitude E6330
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
> ASF! SSDT SLIC BGRT
> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2891029960 Hz
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP01)
> acpiprt3 at acpi0: bus 2 (RP02)
> acpiprt4 at acpi0: bus -1 (RP05)
> acpiprt5 at acpi0: bus 11 (RP06)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus -1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP03)
> acpiprt13 at acpi0: bus 7 (RP04)
> acpiec0 at acpi0
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> "DLLK0533" at acpi0 not configured
> "DLL0533" at acpi0 not configured
> "PNP0401" at acpi0 not configured
> "SMO8810" at acpi0 not configured
> "*pnp0c14" at acpi0 not configured
> "PNP0C0D" at acpi0 not configured
> "PNP0C0C" at acpi0 not configured
> "PNP0C0E" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "DELLABCE" at acpi0 not configured
> "PNP0C31" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> b8:ca:3a:d8:5f:2e
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> pci4 at ppb3 bus 7
> ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi
> pci5 at ppb4 bus 11
> sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product
> 0x8221 rev 0x05: apic 2 int 17
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 21
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel QM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> pciide0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide0: using apic 2 int 19 for na

Hard disk controller not recognized

[Xianwen Chen]

Dear OpenBSD users,

I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The
installation was done by taking out the hard drive and hook it through
a USB reader to another machine.

I boot the hard drive through Legacy Boot menu. The boot process stops with
root device:

It is possible to boot through bsd.rd. However, the hard drive is not
recognized there.

Here is the dmesg from bsd.rd:

OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17064423424 (16273MB)
avail mem = 16543502336 (15777MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries)
bios0: vendor Dell Inc. version "A16" date 01/18/2016
bios0: Dell Inc. Latitude E6330
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR
ASF! SSDT SLIC BGRT
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2891029960 Hz
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP05)
acpiprt5 at acpi0: bus 11 (RP06)
acpiprt6 at acpi0: bus -1 (RP07)
acpiprt7 at acpi0: bus -1 (RP08)
acpiprt8 at acpi0: bus -1 (PEG0)
acpiprt9 at acpi0: bus -1 (PEG1)
acpiprt10 at acpi0: bus -1 (PEG2)
acpiprt11 at acpi0: bus -1 (PEG3)
acpiprt12 at acpi0: bus 3 (RP03)
acpiprt13 at acpi0: bus 7 (RP04)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
"INT3F0D" at acpi0 not configured
"DLLK0533" at acpi0 not configured
"DLL0533" at acpi0 not configured
"PNP0401" at acpi0 not configured
"SMO8810" at acpi0 not configured
"*pnp0c14" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"DELLABCE" at acpi0 not configured
"PNP0C31" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
b8:ca:3a:d8:5f:2e
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev
0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
pci4 at ppb3 bus 7
ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi
pci5 at ppb4 bus 11
sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product
0x8221 rev 0x05: apic 2 int 17
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 21
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel QM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub3 at uhub1 port 1 configuration 1 interface 0 "v