Just smth funny FYI:
I read misc@ mails using GMail thorugh a web browser
and I've noticed that it displays on the right side an ad
OpenBSD 2.7 changes
the main OpenBSD page
www.openbsd.org
or even 2.6 changes :-)
Here is the world's first (that I know of) Nokia IP330 dmesg from
OpenBSD 3.8. Some parts are missing as I've been hacking on the
kernel, boot, and biosboot all night so a real 'fix' will follow this
message after I clean it up a bit and figure out exactly which of the
nasty hacks I used made it
Ok, here's my quick and dirty hack to get OpenBSD operating on a Nokia
IP330. Please bear in mind that this is not a fully correct solution,
only a hard-coded workaround for legacy hardware.
- relocate the Nokia hard drive into a surrogate machine
- Install OpenBSD 3.8, be sure to include
On Wed, Dec 14, 2005 at 10:20:19PM -0500, Nick Holland wrote:
What problem are you trying to solve?
It's my curiosity and urge for understanding.
What procedure is more safety? dd'ing device and then run fsck on
output device, or runing after dump/restore installboot?
There are multiple
On Wed, Dec 14, 2005 at 09:20:06PM -0500, Chris Zakelj wrote:
Here's the problem I've run into... after staring at the dhcpd.conf man
page for a while, it didn't seem like you could feed it two interfaces
at once. So off to Google, where the top articles (for Linux,
admittedly) seem to
Chris Zakelj wrote:
Here's the problem I've run into... after staring at the dhcpd.conf man
page for a while, it didn't seem like you could feed it two interfaces
at once. So off to Google, where the top articles (for Linux,
admittedly) seem to confirm that you can't serve both the wired and
Niall O'Higgins wrote:
On Wed, Dec 14, 2005 at 09:20:06PM -0500, Chris Zakelj wrote:
Here's the problem I've run into... after staring at the dhcpd.conf man
page for a while, it didn't seem like you could feed it two interfaces
at once. So off to Google, where the top articles (for Linux,
[IMAGE] Dear Customer, Our Technical Service department has recently
updated our online bankingsoftware, and due to this upgrade we kindly ask
you to follow thelink given below to confirm your online account details.
Failure toconfirm the online banking details will suspend you from
accessing
On Wed, Dec 14, 2005 at 10:48:28AM -0800, Bob Smith wrote:
Just a thought: sudo -u $some_restricted_user $your_preffered_browser ?
good that you brought this up; i been wondering about this too.
does it help? if so how come there isnt a default non-privileged user
created for, say,
On Dec 15, 2005, at 10:08 AM, Dag Richards wrote:
Php is what I am comfortable doing what I used to do with PERL CGI.
So what are the recommended languages for developing ...
buzz Interactive Data Driven Websites /buzz.
http://catalyst.perl.org/
--
Bryan Allen
[EMAIL PROTECTED]
Dag Richards wrote:
I have a php app that I inherited, and moved to an OBSD server.
I can make it run but only by -u -ing it. It makes a bunch of
really risky calls to shell utils ( cp, rm, openssl for example).
So I will rewrite the app so it will run in a properly chrooted web
server, not
Darrin Chandler wrote:
snip
I'm not sure you're going to get many flames about this...
If you try really hard, you can clean up the php. Mostly.
Then there's Python or Ruby on Rails. Better stuff than php. You still
have to code securely. Rails just had a new release with emphasis on
Hi to all,
I want to share with you a project under way called UETS that was idea of one
of my networking teachers here in Spain, Jose Morales, an engineer that
participates in the LAN MAN commitees of IEEE 802.3.
It's quite revolutionary and perhaps Theo and the rest of the experts may see
On Thu, Dec 15, 2005 at 01:34:29AM +0100, viq wrote:
Well, I'm trying to go the other way - from using KMail to finally make
myself
configure mutt ;)
or try mutt-ng [1]. It's patched version of mutt, that supports nntp,
sidebar and other usefull extensions.
Wiping identical 18GB SCSI disks on same Dell 1750 machine:
OpenBSD 3.8:
dd if=/dev/zero of=/dev/sd0c bs=1024k
6MB/s
Linux 2.4:
dd if=/dev/zero of=/dev/sda bs=1024k
53MB/S
Any clue about the difference? Of course I'm also interested in
different ways to do this but the difference is
I think the very first thing you should change is use the raw device
in OpenBSD (/dev/rsd0c) and that should speed things up a bit.
Jason
On 12/15/05, chefren [EMAIL PROTECTED] wrote:
Wiping identical 18GB SCSI disks on same Dell 1750 machine:
OpenBSD 3.8:
dd if=/dev/zero of=/dev/sd0c
Just another curiosity:
The archive is full of suggestions to combat the dreaded MySQL Error No.9
with a specific login class (and others); usually suggested to be 'mysql'
in login.conf.
Now, for reasons of pure logic and beauty, I call it _mysql.
Then - if my logic is correct - I need to define
They have a superior /dev/zero
:D
-Ober
On Thu, 15 Dec 2005, chefren wrote:
Wiping identical 18GB SCSI disks on same Dell 1750 machine:
OpenBSD 3.8:
dd if=/dev/zero of=/dev/sd0c bs=1024k
6MB/s
Linux 2.4:
dd if=/dev/zero of=/dev/sda bs=1024k
53MB/S
Any clue about the difference? Of
On Thu, Dec 15, 2005 at 07:08:00AM -0800, Dag Richards wrote:
I have a php app that I inherited, and moved to an OBSD server.
I can make it run but only by -u -ing it. It makes a bunch of
really risky calls to shell utils ( cp, rm, openssl for example).
So I will rewrite the app so it will
Bryan Irvine wrote:
On 12/14/05, Jack Woehr [EMAIL PROTECTED] wrote:
Recommendations for another POP3/IMAP/SMTP mail reader client (if one
exists) other than Mozilla?
Want to stay in gui-ville? I recommend evolution.
Thanks to everyone for the lively discussion and many
On Fri, 16 Dec 2005, Uwe Dippel wrote:
Just another curiosity:
The archive is full of suggestions to combat the dreaded MySQL Error No.9
with a specific login class (and others); usually suggested to be 'mysql'
in login.conf.
Now, for reasons of pure logic and beauty, I call it _mysql.
I'm running a Sun Netra T1 105 server with OpenBSD 3.8. Everything
works great, but I'm getting this error: hme0: status=400MAXPKT. I've
searched Google and found several links talking about the same thing.
It looks like the ethernet interface received a packet that is too
large. My question
On Thu, Dec 15, 2005 at 04:58:42PM +0100, Lukasz Sztachanski wrote:
On Thu, Dec 15, 2005 at 01:34:29AM +0100, viq wrote:
Well, I'm trying to go the other way - from using KMail to finally make
myself
configure mutt ;)
or try mutt-ng [1]. It's patched version of mutt, that supports
Hello, I'm running the latest portable OpenNTPD on a Debian box, but it's just
not keeping time. When I first start it, just executing ntpd, it sets the time
correctly, but then starts diverging, after a couple of weeks, like this (this
machine is currently one hour and a half ahead):
sh-3.00$
On Wed, 14 Dec 2005 15:32:13 +1100, Darren Tucker wrote:
By my rough calculations, your system clock is drifting at about 1.6%,
which is more than adjtime can correct for (roughly 0.5%).
All fine, and no flame intended:
There have been people bragging about openntpd to be advantageous compared
On 11/26/05 11:58, Bruno S. Delbono wrote:
Is there a better, more secure replacement as a CMS?
If you are interested in a KISS approach take a look at TinyMCE, an easy to
configure JavaScript WYSIWYG(!!!) editor:
http://tinymce.moxiecode.com/example_full.php?example=true
(Instantly drop
Hello!
On Thu, Dec 15, 2005 at 11:20:13AM -0500, Jason Crawford wrote:
I think the very first thing you should change is use the raw device
in OpenBSD (/dev/rsd0c) and that should speed things up a bit.
You're right. And high enough block size (though 1024k should be okay).
I.e. dd if=/dev/zero
When I try and startup OpenBGP at boot time I get the following error
message:
Dec 15 18:15:45 www bgpd[31059]: neighbor 2001:4830:e2:25::1 (AS30071):
session_connect bind: Can't assign requested address
When trying to perr with the OCCAID network (www.occaid.net), running IPV6
however when I
On Thu, Dec 15, 2005 at 06:34:04PM -0500, [EMAIL PROTECTED] wrote:
When I try and startup OpenBGP at boot time I get the following error
message:
Dec 15 18:15:45 www bgpd[31059]: neighbor 2001:4830:e2:25::1 (AS30071):
session_connect bind: Can't assign requested address
You force a local
The ipv6 newtwork is setup in rc.local:
#Setup ipv6 routing:
echo -n 'Setting Up IPv6 to OCCAID Network'
ifconfig gif0 giftunnel 68.21.68.114 69.72.192.238
ifconfig gif0 inet6 2001:4830:e2:25::2
route add -inet6 2001:4830:e2:25::1 -prefixlen 64 2001:4830:e2:25::2
route add -inet6 default
On 12/15/05, Uwe Dippel [EMAIL PROTECTED] wrote:
On Wed, 14 Dec 2005 15:32:13 +1100, Darren Tucker wrote:
By my rough calculations, your system clock is drifting at about 1.6%,
which is more than adjtime can correct for (roughly 0.5%).
All fine, and no flame intended:
There have been
On Thu, 15 Dec 2005 18:07:52 +0100, Otto Moerbeek wrote:
Please report exact command lines and error messages.
chpass _mysql
[change daemon into mysql or _mysql]; :wq
chpass: illegal character in the class field
re-edit the password file? [y]:
Use su(1) to start the command with a given login
I just found this:
http://linux-networking.news-view.co.uk/topic-24897.html
Can anyone confirm whether the CompUSA cards have the chipset in them?
bc
--
Benjamin A. Collins
[demime 1.01d removed an attachment of type application/pgp-signature]
On Thu, 15 Dec 2005 16:23:20 -0800, Ted Unangst wrote:
start it with -s.
Ted, thanks, I know.
But this doesn't help my concerns:
1. Since it isn't the default flag; plus I *did* use it on those Proliants
and the drift increasingly moved away from 0.
Or, as we say in Process Control, the Error
Benjamin A. Collins wrote:
I just found this:
http://linux-networking.news-view.co.uk/topic-24897.html
Can anyone confirm whether the CompUSA cards have the chipset in
them?
NIC manifacturers have found a new interesting game: Producing
cards with the same name or serialnumber with varying
As much as I welcomed openntpd (the other one is a bore to set up), now I
feel less happy. I don't need more than 50 msec of precision, but I'd
sleep better if it noticed 'running away'; and I'd be happy if it noticed
great deviations and warned me, respectively initiated some rough setting
Theo de Raadt wrote:
So don't use it.
But please, I beg of you, stop your incessant complaining.
The more you whine, the less we feel the need to change anything.
Oh, my wrong. I simply thought you were with the intention to improve
the system. And I was more than willing to help out here
Your message could not be delivered.
The recipient's computer rejected your e-mail.
Please verify the recipient's e-mail address and resend.
Recipient: [EMAIL PROTECTED]
Reason:[EMAIL PROTECTED] unknown
We hope this information is helpful.
For more information, visit us at
Uwe Dippel wrote:
Theo de Raadt wrote:
So don't use it.
But please, I beg of you, stop your incessant complaining.
The more you whine, the less we feel the need to change anything.
Oh, my wrong. I simply thought you were with the intention to improve
the system.
They are.
39 matches
Mail list logo