Hello All
I have a Intel Core2Duo desktop (dmesg attached below)
running fully patched i386 4.6 GENERIC.MP.
xdriinfo and glxinfo o/p doesn't change whether
machdep.allowaperture is set to 1 or 2. And X is
fully functional/stable in both cases as it has been for
the past 6 months (with
On Fri, Oct 30, 2009 at 08:48:47PM -0400, Tony Abernethy wrote:
Sorry for top-posting, but please: Disk sectors start with 1 (unless you are
reformatting the entire track and something like Write Record zero still
exists)
On DOS-FORMATTED disks, the initial sector is at cylinder 0, head 0,
Sorry for top-posting, but please: Disk sectors start with 1
Just pathetic. Hope you actually get a life sometime.
On Sat, Oct 31, 2009 at 6:57 AM, srikant@gmail.com wrote:
Hello All
I have a Intel Core2Duo desktop (dmesg attached below)
running fully patched i386 4.6 GENERIC.MP.
xdriinfo and glxinfo o/p doesn't change whether
machdep.allowaperture is set to 1 or 2. And X is
fully
How can umask be set on the remote host for chrooted sftp users?
I'm having trouble guessing how to set umask for sftp users on the
remote system. AFAIK, it is usually function of the shell, which is not
used by the sftp client.
~/.cshrc, ~/.profile, and ~/.login seem to not affect sftp, nor
On Saturday 31 October 2009 10.13.44 you wrote:
How can umask be set on the remote host for chrooted sftp users?
[...]
Setup a umask for your users' class in login.conf(5). Perhaps add them in a
new class, eg.:
master.passwd(5):
user:*:1001:1001:sftp:0:0::/home/user:/bin/ksh
login.conf(5):
On 31 October 2009 c. 10:47:31 Matthieu Herrb wrote:
'2' is needed by X.Org drivers that rely on the int10 emulation to
get things setup through the bios of the card.
And how can user easily detect that a driver rely on int10 emulation? Or
no one should bother as the drivers will get fixed
Hi, I'm using OpenBSD 4.6 GENERIC on a alix 2D3 board with
a compact flash card mounted as ffs.
wd0 at pciide0 channel 0 drive 0: CF CARD 4GB
wd0: 1-sector PIO, LBA, 3831MB, 7847280 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
I try to use remote NFS directory for /usr/ports,
Hello!
My LAN (10.51.0.0/16) is behind OpenBSD router with pf.
vlan2 - external interface, vlan621 - internal.
In order to count traffic from Internet to LAN and vice versa with pflow
I need to use states on internal interface vlan621. But when states are enabled
then queues do not work. My
I have a Lenovo T60p (8744-J2U L3-CM199-07/07).
I have been running OpenBSD on it since I purchased it (Summer 2007).
The CPU fan is getting noisy and I'd like to replace it.
The store where I purchased my laptop cannot order the replacement part.
Can anyone suggest a supplier for this part?
BTW, does anyone know if any other (X?) programs require '2', and in
which cases? mplayer?
I have been running mplayer, xine and openarena without
any problems with value 1 for more than 6 months.
Yours
Srikant.
Maybe it's more usefull encrypted a file IN the /home partition and
move the 'shit' there, then you create symlinks (ln -s) to the
encrypted file and done.
2009/10/30 Brad Tilley b...@16systems.com:
I wrote some notes on how I normally encrypt /home on OpenBSD laptops.
I was hoping misc could
Vadim Zhukov wrote:
BTW, does anyone know if any other (X?) programs require '2', and in
which cases? mplayer?
No, it's related to physical memory access (..drivers) can access, if
the X server starts then then the same programs will start.. X is the
only thing that ever directly opens
On Sat, Oct 31, 2009 at 01:01:58PM +0300, Vadim Zhukov wrote:
On 31 October 2009 c. 10:47:31 Matthieu Herrb wrote:
'2' is needed by X.Org drivers that rely on the int10 emulation to
get things setup through the bios of the card.
And how can user easily detect that a driver rely on int10
On Fri, Oct 30, 2009 at 07:57:08PM -0400, Brad Tilley wrote:
I wrote some notes on how I normally encrypt /home on OpenBSD laptops.
I was hoping misc could read it and bash it around some. I'd like to
know if I'm doing something wrong. No jokes about Beck's ass please :)
On Sat, Oct 31, 2009 at 2:08 PM, Brynet bry...@gmail.com wrote:
I know this is unrelated, Matthieu.. but are you and Owain working on
getting DRI/DRM working on other supported architectures? and fixing
the other drivers (..ragedrm/mgadrm/machdrm/etc have been broken since
4.5).
It's on
On Sat, Oct 31, 2009 at 9:30 AM, Joachim Schipper
joac...@joachimschipper.nl wrote:
You should also be careful to note that /root is not encrypted under this
scheme.
The title says it all. Like most normal people, I keep data in /home.
I don't care about meta data that might be in /tmp and I
Brad Tilley wrote:
I wrote some notes on how I normally encrypt /home on OpenBSD laptops.
I was hoping misc could read it and bash it around some. I'd like to
know if I'm doing something wrong. No jokes about Beck's ass please :)
http://16systems.com/openbsd_laptop_encryption.txt
Thanks,
Brad
The same thing happened to me 2 months ago. Maybe this fan is not very
reliable.
Anyway, I bought mine online on the IBM France website. For Canada, it
seems you have to contact the Toronto Parts Order Centre
If you have enough memory you can avoid the /tmp problem by moving it
into RAM:
fstab:
swap /tmp mfs rw,async,nodev,nosuid,-s=200 0 0
This will also speed up some things that write to /tmp.
But keep in mind that in case of a crash the content is lost (if this is
relevant for you).
* To Unmount, do this:
- # unmount /home
+ # umount /home
# vnconfig -v -u svnd0
/Markus
Brad Tilley wrote:
I wrote some notes on how I normally encrypt /home on OpenBSD laptops.
I was hoping misc could read it and bash it around some. I'd like to
know if I'm doing something
I am planing on rebuilding my laptop shortly. I plan on putting Ubuntu 9.10
as the base OS, and I want to be able to run OpenBSD as a guest OS under
one of the FM' choices. Preferably one of the free ones (eg not VMWare).
What is the wisdom of the list on this?
--
One of the main causes of the
On Sat, Oct 31, 2009 at 10:00 AM, Jacob Yocom-Piatt
j...@fixedpointgroup.com wrote:
disk name is sd0) fdisk -iy sd0, disklabel -E sd0, make a smallish 100-150
MB 4.4BSD partition for root and the rest of the disk set as a single
partition of type RAID e.g. /dev/sd0a is root and /dev/sd0b is
I've been running it under virtualbox quite a while. Has trouble
compiling a full release, but does well other than that,
-B
On Sat, Oct 31, 2009 at 8:12 AM, stan st...@panix.com wrote:
I am planing on rebuilding my laptop shortly. I plan on putting Ubuntu 9.10
as the base OS, and I want to
On Sat, Oct 31, 2009 at 09:42:58AM +0100, Michiel van Baak wrote:
I tried to upgrade my 4.5 and got the same.
Sorry, have no way around it for the moment. I reverted the vm back to
it's previous working state.
GENERIC has a few things enabled that play hob with current generation KVM
and
On Sat, Oct 31, 2009 at 10:12:02AM -0500, stan wrote:
I am planing on rebuilding my laptop shortly. I plan on putting Ubuntu 9.10
as the base OS, and I want to be able to run OpenBSD as a guest OS under
one of the FM' choices. Preferably one of the free ones (eg not VMWare).
What is the
It works under KVM. I vaguely recall mpbios0 and acpmiadt0 need to be
disabled.
Then it doesn't work.
I've got this car, but the engine won't start. But it works fine,
because if some friends help me I can push it down the road.
We won't cripple OpenBSD just because the virtual machines out
I'm fresh off the boat from Debian. I love OpenBSD's attitude, and the
documentation is even pretty decipherable, but I'm still a little
confused by pf. I managed to build a trivial filter, but there are a
few things I don't understand.
I read somewhere (3 books, google, the website docs,
On 1 November 2009 c. 00:00:41 ghe wrote:
I'm fresh off the boat from Debian. I love OpenBSD's attitude, and the
documentation is even pretty decipherable, but I'm still a little
confused by pf. I managed to build a trivial filter, but there are a
few things I don't understand.
I read
On 2009-10-31, ghe g...@slsware.com wrote:
pf.conf consists largely of anchors (to fork on protocol) and sub-
anchors below them to fork on service -- I'm trying to reduce the
count of rules seen by a packet to a minimum. But
no need for that, we have automatic skip steps, and a ruleset
Lars Nooden wrote:
How can umask be set on the remote host for chrooted sftp users?
You can set it on the server side with sftp-server's -u option but
that's very new (post 4.6).
You would have something like this in sshd_config:
Subsystem sftp sftp-server -u 0022
--
Darren Tucker
On Sat, Oct 31, 2009 at 01:57:20PM -0600, Theo de Raadt wrote:
It works under KVM. I vaguely recall mpbios0 and acpmiadt0 need to be
disabled.
Then it doesn't work.
I've got this car, but the engine won't start. But it works fine,
because if some friends help me I can push it down the
OpenBSD 4.5+ works if mpbios is disabled, more info here:
http://scie.nti.st/2009/10/4/running-openbsd-4-5-in-kvm-on-ubuntu-linux-9-04
OpenBSD 4.5 works on 99.9% of PCs out there with mpbios enabled,
so KVM must have a really stupid bug.
I've had decent luck with VirtualBox as of late, in previous versions
VirtualBox would cause problems at install time bugging out when
extracting packages.
I've never had a problem with VMware though, but my experience is
limited. I've been running it under ESXi 4.0 for a while and it's been
very
On Sat, Oct 31, 2009 at 03:00:41PM -0600, ghe wrote:
I'm fresh off the boat from Debian. I love OpenBSD's attitude, and
the documentation is even pretty decipherable, but I'm still a
little confused by pf. I managed to build a trivial filter, but
there are a few things I don't understand.
I
On Sat, Oct 31, 2009 at 05:50:57PM -0600, Theo de Raadt wrote:
OpenBSD 4.5+ works if mpbios is disabled, more info here:
http://scie.nti.st/2009/10/4/running-openbsd-4-5-in-kvm-on-ubuntu-linux-9-04
OpenBSD 4.5 works on 99.9% of PCs out there with mpbios enabled,
so KVM must have a really
On Sat, Oct 31, 2009 at 05:50:57PM -0600, Theo de Raadt wrote:
OpenBSD 4.5+ works if mpbios is disabled, more info here:
http://scie.nti.st/2009/10/4/running-openbsd-4-5-in-kvm-on-ubuntu-linux-9-04
OpenBSD 4.5 works on 99.9% of PCs out there with mpbios enabled,
so KVM must have a
On Sat, Oct 31, 2009 at 11:29 PM, Chris Dukes pak...@pr.neotoma.org wrote:
I'm at a bit of a loss as to why mpbios is still enabled in GENERIC.
Because more machines work with mpbios that don't work without it than
machines that work without it but not with it.
My memory of the brief
38 matches
Mail list logo
