On 2016-09-05, csszep wrote:
> Hello!
>
> In ikectl there is a "-s socket" parameter to change the control socket
> location. But in iked the "-s" parameter is missing, so you cannot change
> the socket location.
>
> This is not implemented in iked? It is useful if run two iked
Hi Kasper,
On 2016-09-07 Wed 15:07 PM |, Kasper Haitsma wrote:
> 5.9 -> 5.9 nothing at all
Fix this problem first.
>
> pf.conf is the same on all 4 boxes
spamd's pf rules changed in 5.8:
http://www.openbsd.org/faq/upgrade58.html
Cheers,
--
Craig Skinner | http://linkd.in/yGqkv7
On September 8, 2016 11:34:48 AM GMT+02:00, "Mart Tõnso"
wrote:
>> True. If it was merely GENERIC[.MP] with vmm enabled, then fine. But
>a
>> kernel named "TIMMU" could deserve some explanation as to what's been
>> done to it.
>
>That's why I included the config in the first
> True. If it was merely GENERIC[.MP] with vmm enabled, then fine. But a
> kernel named "TIMMU" could deserve some explanation as to what's been
> done to it.
That's why I included the config in the first email, but I see where the
confusion arises.
Since VMM is not enabled by default and
On Wed, 7 Sep 2016 12:31:58 -0400
Daniel Ouellet wrote:
> A quick question on this as I only notice this in the last few days by
> accident actually, and I want to know if that's real or not.
> ...
> and the V100 simply doesn't support >127Gb.
> ...
> discover by mistake
On 12/10/15 15:49, Etienne wrote:
[...] in X. setxkbmap(1) needs a device id as an argument, and I'm
supposed to find that id in the output of "xinput list", but that
output never changes, with the Yubikey plugged in or out. It
permanently shows:
% xinput list
⎡ Virtual core pointer
On 2016-09-08 09:46, Bob Jones wrote:
Soany one care to give a more sensible suggestion than Theo's
unnecessary anti-Linux rant ??
Well, Bob, I didn't perceive it as anti, just that you want to use
a Linux-specific fstab entry on an OS which isn't Linux. Of course,
I was just a
Hi,
after many troubles with motherboard MS-7613 ( I can't install OBSD 5.9 or 6.0,
many browser with 300% CPU usage, no audio ... ), I thinking change to another
one :)
Somebody have any suggestion for a motherboard that have Micro-ATX form factor
and LGA-1156 socket, which work fine with
On Thu, Sep 08, 2016 at 02:46:03PM +0100, Bob Jones wrote:
> Soany one care to give a more sensible suggestion than Theo's
> unnecessary anti-Linux rant ??
He gave you a clue. You are using options that do not exist op OpenBSD.
See mount(8)
-Otto
>
> On Monday, 5 September 2016,
Montreal Got them monday :D
On Wed, Sep 7, 2016 at 8:53 PM, patrick keshishian wrote:
> Also arrived in Southern California USA
>
> http://sidster.org/gallery/obsd/60/img_2538.sml.jpg
>
> Fantastic work folks and great tee-shirt design!
> Also a "thank you" to Lyn at
Soany one care to give a more sensible suggestion than Theo's
unnecessary anti-Linux rant ??
On Monday, 5 September 2016, Theo de Raadt wrote:
> > OpenBSD 6.0 GENERIC.MP#0 amd64
> >
> > My fstab entry looks like :
> >
> > 10.10.10.10:/srv/share /mnt/ops_test nfs
Perhaps re-read what Theo said, and do not stop and give up when you
get to the word "linux"?
Good luck,
--
Raul
On Thu, Sep 8, 2016 at 9:46 AM, Bob Jones
wrote:
> Soany one care to give a more sensible suggestion than Theo's
> unnecessary
On 9/7/16 4:55 PM, Michael Plura wrote:
> On Wed, 7 Sep 2016 12:31:58 -0400
> Daniel Ouellet wrote:
>
>> A quick question on this as I only notice this in the last few days by
>> accident actually, and I want to know if that's real or not.
>> ...
>> and the V100 simply
Sent from my iPhone
> On Sep 8, 2016, at 8:46 AM, Bob Jones
wrote:
>
> Soany one care to give a more sensible suggestion than Theo's
> unnecessary anti-Linux rant ??
>
> On Monday, 5 September 2016, Theo de Raadt wrote:
>
>>>
The 6.0 CD set and the songs CD arrived today (Germany).
The signatures check out.
#!/usr/bin/perl -w
use File::Find;
my %tree;
my %skip = qw(SHA256.sig 1 TRANS.TBL 1 boot.catalog 1 .slicemapfile 1);
find sub { push @{$tree{$File::Find::dir}}, $_ if -f && !$skip{$_} },
After installing
mariadb-server-10.0.25p0v1.tgz
and
rcctl enable mysqld
/etc/rc.d/mysqld start
I got errors
Directly running
/usr/local/libexec/mysqld
gave
160908 10:07:09 [Note] /usr/local/libexec/mysqld (mysqld 10.0.25-MariaDB)
starting as process 15703 ...
160908 10:07:09 [Warning]
>> 5.9 -> 5.9 nothing at all
>
> Fix this problem first.
if this is fixed, I trust, all is fixed.
>>
>> pf.conf is the same on all 4 boxes
>
> spamd's pf rules changed in 5.8:
> http://www.openbsd.org/faq/upgrade58.html
well http://www.openbsd.org/plus58.html reveals:
Change in spamd(8) to
thrph.i...@gmail.com wrote:
Hi,
after many troubles with motherboard MS-7613
( I can't install OBSD 5.9 or 6.0, many browser with 300% CPU usage,
no audio ... ), I thinking change to another one :)
Somebody have any suggestion for a motherboard that have Micro-ATX form factor
and LGA-1156
On Wed, Sep 07, 2016 at 06:35:26PM +0200, Simon Mages wrote:
> can somebody tell me which AMD graphics adapters are supported by the
> OpenBSD kernel?
>
> radeon(4) has a very big list of supported adapters or chip families.
> I greped a bit in /usr/src/sys/dev/pci/drm/radeon to see which ones
>
On Thu, Sep 08, 2016 at 03:48:21PM +, Peter Fraser wrote:
> After installing
>
> mariadb-server-10.0.25p0v1.tgz
>
> and
>
> rcctl enable mysqld
> /etc/rc.d/mysqld start
>
> I got errors
>
> Directly running
>
> /usr/local/libexec/mysqld
>
> gave
>
> 160908 10:07:09 [Note]
On Fri, Sep 09, 2016 at 02:44:33AM +1000, Jonathan Gray wrote:
> > Am I understanding that using a newer, say Radeon HD 7750 or HD 7870
> > card, with the modesetting(4) Xorg driver would work as long as there is
> > kernel support (which there is)? That would obviously not allow for
> > 2d/3d
> Em 8 de set de 2016, Ã (s) 10:47, Leclerc, Sebastien
escreveu:
>
> I had a freeze on a machine with 5.9 amd64 yesterday, and upgraded the
system
> to 6.0 after that.
> I still had the system freeze today, but I am unsure if it is something
with
> the
I had a freeze on a machine with 5.9 amd64 yesterday, and upgraded the system
to 6.0 after that.
I still had the system freeze today, but I am unsure if it is something with
the hardware?
The message on the console during the freeze :
NMI ... going to debugger
Stopped atacpicpu_idle+0x22d:
On Thu, Sep 08, 2016 at 09:29:45AM -0700, Bryan Vyhmeister wrote:
> On Fri, Sep 09, 2016 at 02:17:03AM +1000, Jonathan Gray wrote:
> > The LLVM in the tree will not be installed as libraries suitable
> > for Mesa initially.
> >
> > I'm not aware of anyone working on updating radeondrm at the
On Thu, Sep 08, 2016 at 09:01:27AM -0700, Bryan Vyhmeister wrote:
> On Wed, Sep 07, 2016 at 06:35:26PM +0200, Simon Mages wrote:
> > can somebody tell me which AMD graphics adapters are supported by the
> > OpenBSD kernel?
> >
> > radeon(4) has a very big list of supported adapters or chip
Hi Jens,
Thank you for sharing your experience.
Best regards,
Raffaele
On Thu, 8 Sep 2016 17:53:24 +0200
"Jens A. Griepentrog" wrote:
> thrph.i...@gmail.com wrote:
> > Hi,
> > after many troubles with motherboard MS-7613
> > ( I can't install OBSD 5.9 or 6.0, many
ok, thanks for the clarification.
2016-09-08 18:49 GMT+02:00, Bryan Vyhmeister :
> On Fri, Sep 09, 2016 at 02:44:33AM +1000, Jonathan Gray wrote:
>> > Am I understanding that using a newer, say Radeon HD 7750 or HD 7870
>> > card, with the modesetting(4) Xorg driver would
On Fri, Sep 09, 2016 at 02:17:03AM +1000, Jonathan Gray wrote:
> The LLVM in the tree will not be installed as libraries suitable
> for Mesa initially.
>
> I'm not aware of anyone working on updating radeondrm at the moment
> and doing so for basic modesetting support is not tied to LLVM.
> 2d/3d
United States
--
Thanks,
Bryan
On Fri, Sep 09, 2016 at 12:54:05AM -0400, Stephen Trotter wrote:
> hi,
> i was attempting a fresh install of 6.0 and got to the part where you pull
> the source tree and update the system to stable.
> i was stuck because the faq states you can (should) use a regular user with
> cvs, and i kept
Hi,
Since I upgraded to OBSD 6.0 I have had some problems with Unbound and
dnscrypt-proxy.
Normally I would troubleshoot by using "dig" to request directly to
dnscrypt-proxy, but for some reason (I don't know) the "-p" option has been
removed and it is impossible to use that now.
Unbound
hi,
i was attempting a fresh install of 6.0 and got to the part where you pull
the source tree and update the system to stable.
i was stuck because the faq states you can (should) use a regular user with
cvs, and i kept getting a permission error from cvs when attempting to run
from /usr
so, just
On Fri, Sep 09, 2016 at 05:54:05AM BST, Stephen Trotter wrote:
> hi,
> i was attempting a fresh install of 6.0 and got to the part where you pull
> the source tree and update the system to stable.
> i was stuck because the faq states you can (should) use a regular user with
> cvs, and i kept
Sent from my iPhone
> On Sep 8, 2016, at 5:49 PM, Martin Hanson
wrote:
>
> Hi,
>
> Since I upgraded to OBSD 6.0 I have had some problems with Unbound and
dnscrypt-proxy.
>
> Normally I would troubleshoot by using "dig" to request directly to
dnscrypt-proxy, but for
Does unbound.conf have the following setting?
do-not-query-localhost: no
Unbound will not query the local host without that set to no.
> On Sep 8, 2016, at 5:49 PM, Martin Hanson
wrote:
>
> Hi,
>
> Since I upgraded to OBSD 6.0 I have had some problems with Unbound
Sent from my iPhone
> On Sep 8, 2016, at 7:32 PM, Predrag Punosevac
wrote:
>
> Dear All,
>
> I have being scratching my head over this issue for two days now so I am
> soliciting help from numerous ISP and network engineers who are luring
> on this list.
>
> I upgraded all
Dear All,
I have being scratching my head over this issue for two days now so I am
soliciting help from numerous ISP and network engineers who are luring
on this list.
I upgraded all machines on my home network to
predrag@oko$ uname -a
OpenBSD oko.bagdala2.net 6.0 GENERIC.MP#0 amd64
on
Edgar Pettijohn wrote:
>
>
> Sent from my iPhone
>
> > On Sep 8, 2016, at 7:32 PM, Predrag Punosevac wrote:
> >
> > Dear All,
> >
> > I have being scratching my head over this issue for two days now so I am
> > soliciting help from numerous
38 matches
Mail list logo