Re: vmd: routing problem

Hello, > Can you people see something that i might missed? The easy way would be enable forwarding, add a vether(4) on the host, bridge it with tap0 and configure it with an IP in the 136.243.186.160/29 subnet. Use that IP as the gateway in your VMs.

Re: OT: protonmail mail body

On Thu, Jul 20, 2017 at 02:46:02AM -0400, Rupert Gallagher wrote: | Out of curiosity, I just checked what all the fuss is about. It turns out that someone reads mail with a non-RFC compliant client, and thus fails to read mime parts. Screw it, update your client. | The other problem seemed to be

Re: vmd: routing problem

Hi List, Hetzner has like other dedicated hosting providers an "crazy" looking network setup for ipv4. Here point to point for the default gw in a different network segment. So it's important also to keep that in mind. Maybe this document helps a bit, need to adapt to Openbsd.

Re: DUMP: Invalid argument: [block -60912738518]

Hi Jan, On Tue, 18 Jul 2017 21:53:03 +0200 Jan Stary wrote: > ... During the dump, there was some activity on the filesystem ... Try altering your scripts stop relevant daemons, then umount the partition before dumping & see if the problem persists. See sections '5.0 Conclusions' and '2.0

Re: vmd: routing problem

Hi Leo, Can you ask them how they route the separate subnet to you? Mischa > On 20 Jul 2017, at 12:59, Leo Unglaub wrote: > > Hey, > >> On 07/20/17 06:25, Mike Larkin wrote: >> sysctl net.inet.ip.forwarding=1 ? >> I'm not a networking expert but I think your VM's subnet mask

Re: vmd: routing problem

Hey, On 07/20/17 13:05, Mischa Peters wrote: Can you ask them how they route the separate subnet to you? as far as i understand it they route the subnet on my main ip address. From there documentation: Newly assigned IPv4 subnets are statically routed on the main IP address of the server,

Re: Read sysctl from file

On 07:45 Thu 20 Jul, Theo de Raadt wrote: > > On 07:39 Thu 20 Jul, Theo de Raadt wrote: > > > someone in linux land went off the map here. and then another piece of > > > software started un-portably assuming that's the way to do things? > > > > Because it's a nice way to apply configuration

Re: Read sysctl from file

On 07:39 Thu 20 Jul, Theo de Raadt wrote: > someone in linux land went off the map here. and then another piece of > software started un-portably assuming that's the way to do things? Because it's a nice way to apply configuration changes made to /etc/sysctl.conf without restarting the whole

Re: Read sysctl from file

> > > On 07:39 Thu 20 Jul, Theo de Raadt wrote: > > > > someone in linux land went off the map here. and then another piece of > > > > software started un-portably assuming that's the way to do things? > > > > > > Because it's a nice way to apply configuration changes made to > > >

Re: Openbsd 6.1 and Current Console Freezes and lockup Proxmox PVE5.0

Alex Bihlmaier writes: > the only issue i had running OpenBSD/Proxmox so far is a constant > system load of ~1 in the OpenBSD guest. The kvm-qemu process on the VM > host also has a quite constant load. In 6.1, load average display changed, typical "at rest" load averages

Re: OT: protonmail mail body

If you make business in Europe, or with people in Europe, then you know about legal compliance with the Commision's standards, and their pdf and p7m signed attachments. Similar standards exist in other countries, and they use mime parts. If your email client cannot read mime parts, you are out

Read sysctl from file

Hello, Is there a way to make sysctl re-read its conf file, or even another file, like sysctl -p does on linux systems ? Supporting this option would be nice, as it is used by the sysctl module of ansible. -- Cordialement, Pierre BARDOU

Re: Read sysctl from file

> Is there a way to make sysctl re-read its conf file, or even another file, > like sysctl -p does on linux systems ? > Supporting this option would be nice, as it is used by the sysctl module of= > ansible. But sysctl doesn't have a configuration file. there is a file called sysctl.conf, but it

Re: Openbsd 6.1 and Current Console Freezes and lockup Proxmox PVE5.0

Am Tue, 18 Jul 2017 21:14:07 -0400 schrieb "trondd" : > When you do come back, mention if this is new with Proxmox 5.0 and if > you've used previous versions succesfully. > > I have been running OpenBSD on Proxmox for 2 or 3 years with no > problems. I think I am still on

Re: Read sysctl from file

> On 07:39 Thu 20 Jul, Theo de Raadt wrote: > > someone in linux land went off the map here. and then another piece of > > software started un-portably assuming that's the way to do things? > > Because it's a nice way to apply configuration changes made to > /etc/sysctl.conf without restarting

Re: OT: protonmail mail body

Out of curiosity, I just checked what all the fuss is about. It turns out that someone reads mail with a non-RFC compliant client, and thus fails to read mime parts. Screw it, update your client. The other problem seemed to be with the list archive. It turns out that at least one archive has no

Re: vmd: routing problem

Hey, On 07/20/17 09:46, Denis Fondras wrote: Can you people see something that i might missed? The easy way would be enable forwarding, add a vether(4) on the host, bridge it with tap0 and configure it with an IP in the 136.243.186.160/29 subnet. Use that IP as the gateway in your VMs. i did

Re: vmd: routing problem

Hey, On 07/20/17 06:25, Mike Larkin wrote: sysctl net.inet.ip.forwarding=1 ? I'm not a networking expert but I think your VM's subnet mask is wrong for the gateway you are trying to use. thank you for your response. I tryed it with net.inet.ip.forwarding being 1 and 0. Both don't work.

Re: Read sysctl from file

> Because it's a nice way to apply configuration changes made to > /etc/sysctl.conf without restarting the whole server? Systemctl doesn't offer hot reload unless the controlled daemon offers the capability in the first place. The only thing systemd does is hits the controlling process on

Re: OT: protonmail mail body

Rupert Gallagher writes: > If you make business in Europe, or with people in Europe, then you > know about legal compliance with the Commision's standards, and their > pdf and p7m signed attachments. Similar standards exist in other > countries, and they use mime parts. If

Re: vmd: routing problem

> What would be the difference to your version where i use vether instead of > an alias? Or did i missunderstand you? > The difference is broadcast trafic won't be sent over your provider network.

Re: Read sysctl from file

On 07:08 Thu 20 Jul, Kai Wetlesen wrote: > > Because it's a nice way to apply configuration changes made to > > /etc/sysctl.conf without restarting the whole server? > > Systemctl doesn't offer hot reload unless the controlled daemon offers > the capability in the first place. The only thing

Preferred configuration for SLAAC in hostname.if

Howdy. Doing a new install from a long hiatus, I've noticed SLAAC is now in the kernel. Looking through the archives: https://marc.info/?l=openbsd-misc=14335917638=2 seems to indicate that the keyword 'rtsol' and 'inet6 autoconf' are "equivalent" as far as /etc/netstart is concerned.

Re: Mounting DVD with single file burned onto

Sending to ports@ to continue this part of the discussion. Please remove misc@ in any replies. On Thu, Jul 20, 2017 at 01:20:41AM +0200, Stefan Wollny wrote: > >> When it comes to backups one usual advice (among others) is to make use > >> of different storage types. So I have tar'ed one folder

Re: Read sysctl from file

> On Jul 20, 2017, at 6:35 AM, BARDOU Pierre wrote: > > Hello, > > Is there a way to make sysctl re-read its conf file, or even another file, > like sysctl -p does on linux systems ? > Supporting this option would be nice, as it is used by the sysctl module of > ansible.

Re: vmd: routing problem

On Thu, Jul 20, 2017 at 02:19:29PM +0200, Leo Unglaub wrote: > Hey, > > On 07/20/17 13:05, Mischa Peters wrote: > > Can you ask them how they route the separate subnet to you? > > as far as i understand it they route the subnet on my main ip address. > > > From there documentation: > > Newly

Re: Read sysctl from file

On 20/07/17 18:48, Consus wrote: On 07:08 Thu 20 Jul, Kai Wetlesen wrote: Because it's a nice way to apply configuration changes made to /etc/sysctl.conf without restarting the whole server? Systemctl doesn't offer hot reload unless the controlled daemon offers the capability in the first