Hello,
With "6.3 release" version, i'm unable to set swap priority with fstab
using the following :
2e04cb867188f137.b none swap sw,priority=0
e7f9094bf357d407.b none swap sw,priority=1
I get the following result :
$ swapctl
Device 512-blocks Used Avail Capacity Priority
/dev/sd
Hello,
Functionnally pf is OK : packets are blocked or passed according to
what's expected. But when i use systat for live examination of what
appends amongst the rules there is no hit on match rules with IP list
while there's on relevant block rule.
Did someone notice such behaviour, or did
Solene Rapenne wrote:
Eric Huiban wrote:
Hello,
With "6.3 release" version, i'm unable to set swap priority with fstab
using the following :
2e04cb867188f137.b none swap sw,priority=0
e7f9094bf357d407.b none swap sw,priority=1
I get the following result :
$ swapctl
Device
Base Pr1me wrote:
Has anyone played around with compiling the Espressif SDK for their chips?
Just curious.
Thanks,
Tracey
I'm beginning to modify the SDK for Espressif ESP32 step by step when
time allows. It's full of linuxism and very gnuish, but if i can do some
mod in their stuff everybo
Hello,
I'm looking for a dmesg from a Z68P-DS3 motherboard as seen by
OpenBSD/amd64, as well as the result of "sysctl hw". Does someone have
this kind of information available ?
Reason: on my system the ITE chip is not seen by the OS. So... Just
checking... and sorry for the noise ! :)
Tha
Hello,
I'm currently playing with home stuff with OpenBSD, and i'm now looking
for a media server with dlna support amongst package. Up to this day i
was not able to find one, or at least to find how to enable and
configure that.
The OpenBSD based server side is ok and well supported (also tested
Eric Huiban wrote:
> Hello,
>
> I'm currently playing with home stuff with OpenBSD, and i'm now looking
> for a media server with dlna support amongst package. Up to this day i
> was not able to find one, or at least to find how to enable and
> configure that.
>
tech-lists wrote:
> On 30/09/2016 16:49, tech-lists wrote:
>> Hello misc@
>>
>> If I had this arrangement:
>>
>> openbsd re0 --- unmanaged gigabit switch --- vdsl modem offering PPPoE
>>
>> can I expect pppoe0 on the openbsd box to be able to communicate with
>> the modem and bring the line up?
>
Raimo Niskanen wrote:
> I did a bridge configuration according to the FAQ with bridge0 containing
> athn0, vr1 and vether0. vether0 got the IP address configuration that
> athn0 had before, dhcpd was reconfigured to serve vr0 and vether0 and that
> worked just fine. DHCP over athn0 passes throug
Hello,
I should have miss something in the man pages with softraid and bioctl.
But i want to form a RAID 1 between two 3TB harddisk (2.7TiB) and it is
acting like 2TiB MBR disks with OpenBSD 6.0.
fdisk -ig sd1 is OK. same for sd2. No EFI boot partition.
disklabel is ok with a 2.7TiB ".a and
Stefan Sperling wrote:
On Fri, Mar 03, 2017 at 01:27:20PM +0100, Eric Huiban wrote:
Hello,
I should have miss something in the man pages with softraid and bioctl. But
i want to form a RAID 1 between two 3TB harddisk (2.7TiB) and it is acting
like 2TiB MBR disks with OpenBSD 6.0.
fdisk -ig sd1
Eric Huiban wrote:
Stefan Sperling wrote:
On Fri, Mar 03, 2017 at 01:27:20PM +0100, Eric Huiban wrote:
Hello,
I should have miss something in the man pages with softraid and
bioctl. But
i want to form a RAID 1 between two 3TB harddisk (2.7TiB) and it is
acting
like 2TiB MBR disks with OpenBSD
Hi,
Give a try to ifconfig as regarde privacy policy lifetime : pltime & vltime if
i'm still right. You can also preset this two counters using the same command.
Eric
Jason Adams wrote:
On 11/09/2014 02:30 PM, h410g3n wrote:
I encountered the same problem.
You must have just upgraded from 5.5 and forgot to run sysmerge, right? :D
Jason Adams wrote:
Everytime /etc/netstart runs I get a no closing quote message.
Hate to obsess about trivialities but wonderi
Hello,
It was just suggested to me to post all this here for information after
i repaired a defunct ITX box : 64bits platform is available with D2xxx
based Asrock mainboards (at least with a fanless D2700).
Note 1 : check BIOS revision for d2xxx boards. Asrock needs unofficial
1.13-beta or o
On 01/23/13 01:43, Salil Wadnerkar wrote:
Hi,
On my amd64 machine, firefox crashes regularly after some time.
[...]
$ uname -a
OpenBSD passport.my.domain 5.2 GENERIC.MP#17 amd64
I am on OpenBSD current and I have my system and packages updated just
yesterday.
Thanks
Salil
Your firefox do
On 01/28/13 13:43, Ed Ahlsen-Girard wrote:
On Fri, 25 Jan 2013 01:55:35 +0100
Eric Huiban wrote:
On 01/23/13 01:43, Salil Wadnerkar wrote:
Hi,
On my amd64 machine, firefox crashes regularly after some time.
[...]
$ uname -a
OpenBSD passport.my.domain 5.2 GENERIC.MP#17 amd64
I am on
Sent from my WIKO PULP 4G
Le 30 mars 2016 10:07, Sean Kamath a écrit :
>
> Still using a Wyse (50?) on my Ultrasparc 80.
>
> In college, we had these weird DEC PC’s that we used as VT100 compatible
> terminals.
>
> There were so many. The VT100 was the prototype what XTerm emulated.
>
> Sean
Hello,
I've got a problem to properly build IPv6 address in pf.conf in order to
have the proper protection... i may be tired and i probably missed
something... but i now begin to go round and round... and round...
the constraint is that the IPv6 prefix (a /56) given by the ISP to its
router is dy
Hello there ...
I had to produce this ugly one on fresh 5.5 release in order to get my
cardreader operational.
diff on pcidevs :
5687a5688
> product REALTEK RTL8402 0x5286 RTL8402 Card Reader
and diff on rtsx_pci.c :
61c61,62
< PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_REA
Le ven 20 jui 2007 14:59:17 CEST, vladas a C)crit:
>Is it possible to connect to server's serial console through the
>S-Video 7-pin locking "dub" connector - RS-232C cable [1]
>directly
The answer is simple as possible : No.
> without using Video/S-Video to VGA/Component Video
>Converterconvert
Le ven 20 jui 2007 16:06:56 CEST, vladas a C)crit:
>Eric,
>
>
>
>On 7/20/07, Eric Huiban [EMAIL PROTECTED]
>pf.net> wrote:
>> 9 pins DB plug to fit with a 15 pins DB plug.
>
>
>
>Did you actually read my question?
Yes : how to connect PC S-video plug (outp
Hello,
It seems that i missed something when reading the man pages but i am
clearly unable to get correct date within openvpn log file when produced
directly by the daemon without syslog interaction.
Here is a small extract from my "test machine" : sparcstation ultra5,
openbsd 3.9 generic, o
Hi
i'm currently looking for solution to monitor external environment from
an openbsd server.
I'm currently trying to play such game... yes playing... not working...
:-)
has anyone advise to find cheap sensors (temperature, but also humdity,
pressure, light, electricity before UPS, ...)
Stuart Henderson a icrit :
On 2006/11/10 08:44, Julien TOUCHE wrote:
Eric Huiban wrote on 10/11/2006 01:10:
After a long time of lurking and looking through solutions like USB,
Ethernet, serial busses, home produced, commercial ones, etc : i ended to
buy a scraped terminal server
badmagic a icrit :
No, that's not it. I just clipped the wrong part of my dmesg.
It's running under GENERIC kernel.
pciide0 at pci1 dev 3 function 0 vendor 0x1095 product 0x0646 rev
0x03: DMA, channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide0: using ivec 1820 for
Eric Dillenseger a icrit :
Hi,
I'll soon buy a soekris, but just realized i have no serial port on my
laptop (duh!), has someone already tried to use a usb serial adapter?
Most of the time this works as a traditional com port on windows, but
what about openbsd, will it be ok for a serial consol
Le mar 30/03/10 11:23, "Duncan Patton a Campbell" campb...@neotext.ca a
C)crit:
> I've got a cf card running as a secondary drive on a Sparc Ultra 5
> (Sparc64), but have not been able to get it to boot. The cf/ide plug I am
using has
> no master/slave/cs sets and a microprocessor on it as well,
28 matches
Mail list logo