I am (almost) total newbie in respect with networks. Currently in process
of building my own firewall/gateway for home network (based on APU 2C4),
I've decided to take the right (and difficult, at least for me) way of
doing so by using OpenBSD's pf.
Peter's excellent book is my main help and
I plan to use Ubiquiti Unifi AC LR.
On Sun, Nov 27, 2016 at 4:25 PM, Jan Stary wrote:
> After an upgrade to the latest i386 snapshots,
> those messages have disappeared. Looking at the source,
> it's because it became a DEBUG only message.
> (Yes, the ral throughput still
I'd like to have an encrypted Ext2 data partition, which can be shared
between OpenBSD and Linux. LUKS probably does not work in OpenBSD. Maybe
something like EncFS is the way to go?
planning to install -current on my Thinkpad T450s (SSD).
I need to have several data directories encrypted, however would not mind
whole-disk encryption. Which method would be more supported / recommended?
Whole-disk encryption or creating a container file, loop device and then
en very easy with
> just a couple of calls to bioctl to set it up. Pretty much seamless if
> you have a quick tutorial on it.
> Don't lose your passphrases/keys, and have fun!
> On Wed, Mar 22, 2017 at 9:38 AM, SolÃ¨ne Rapenne <sol...@perso.pw> wrote:
> > Le 2017-03
I have a small problem with httpd and Wordpress.
When I go to https://myipaddress I get "Access denied". If I go to
https://myipaddress/wordpress, everything works as expected.
I have tried to change the appropriate line in the httpd.conf to:
root "/htdocs/wordpress". In that case the
I am trying to sync my media libraries via Syncthing with other machine.
However Syncthing on OBSD complains about "too many open files" and refuses
therefore to scan and synchronize the folder.
I have increased sysctl kern.maxfiles as well as openfiles-max for the
staff group (of which
thank you very much, your solution helped.
On Sat, Nov 24, 2018 at 3:37 AM joshua stein wrote:
> On Fri, 23 Nov 2018 at 19:48:04 +0100, Jan Betlach wrote:
> > Hi all,
> > I am trying to sync my media libraries via Syncthing with other machine.
Marc Espie wrote:
> On Sat, Nov 24, 2018 at 02:32:02PM +0100, Jan Betlach wrote:
> > Hi all,
> > strange problem. I am running -current. I have downloaded latest ports
> > tree .tar.gz to /temp, then tar xzf in /usr.
> > All ports are where they belong (/usr/p
Yes, it probably was, sorry for that. I did not think adding the portslist
package is a correct solution as it has not been found, therefore asked
On Sat, Nov 24, 2018 at 7:34 PM Marc Espie wrote:
> On Sat, Nov 24, 2018 at 07:22:09PM +0100, Jan Betlach wrote:
> > Becau
strange problem. I am running -current. I have downloaded latest ports
tree .tar.gz to /temp, then tar xzf in /usr.
All ports are where they belong (/usr/ports).
However when searching anything (make search key=package) I get
Please install portslist
I may have one spare Thinkpad X270 in mint conditions, which I would be
willing to donate to one of the OpenBSD developers. Not sure how to
proceed with this.
I would probably prefer a developer located somewhere close to me (Czech
Republic, eastern part of Germany,…) as it will be
It was either a really bad joke or mental. Now it is threatening.
On 20 Jun 2019, at 23:54, Theo de Raadt wrote:
Someone is going to have regrets.
Maxim Bourmistrov wrote:
IF NOT, I'll start to talk to Canadian govs
On Thu, 20 Jun 2019 at 23:48, Maxim Bourmistrov
I hope it is OK to share here:
have you increased the shared memory limits and kern parameters in the
sysctl.conf for more relaxed desktop usage?
On 6 Jul 2019, at 10:11, maillists.rul...@mailbox.org wrote:
Otto Moerbeek wrote:
On Sat, Jul 06, 2019 at 09:32:22AM +0200,
I am setting up a home NAS for five users. Total amount of data stored
on NAS will not exceed 5 TB.
Clients are Macs and OpenBSD machines, so that SSHFS works fine from
both (no need for NFS or Samba).
I am much more familiar and comfortable with OpenBSD than with FreeBSD.
Envoyé : vendredi 15 novembre 2019 14:35
À : Jan Betlach
Cc : firstname.lastname@example.org
Objet : Re: Home NAS
My experience with ZFS (FreeNAS for the most part) is that it becomes
more "expensive" to expand your pool after the fact (for a couple of
different reasons, see below), but if
Isn’t it commented out by default?
nobody about the $subject? :)
Why isn't ChallengeResponseAuthentication NO in sshd_config by
It would be more secure, afaik.
Sent: Thursday, December 19, 2019 at 7:58 PM
From: "lu hu"
I’m interested as well.
On 17 Feb 2020, at 17:10, Kevin Chadwick wrote:
On 2020-02-17 15:09, Julius Zint wrote:
Some feedback from the OpenBSD community on this would also be
appreciated. Are there
enought people interessted in a Trusted Boot with OpenBSD?
On Thu, Jan 16, 2020 at 1:45 PM Jan Betlach
Any ideas what is wrong? Might as well be a pebkac I am unaware
Clock out of sync?
I have seen this a few times and it was always my system clock out of
whack. Might be as easy as making sure ntpd is running.
I am getting following error when running syspatch as root on my APU2C4:
ftp: SSL write error: certificate verification failed: certificate is
not yet valid
I am using Fastly in my installurl: https://cdn.openbsd.org/pub/OpenBSD
Other machines run syspatch without any problem, using
From: Jan Betlach
Subject: Re: Syspatch
Date: Thu, 16 Jan 2020 13:50:59 +0100
Wow / pebkac as I’ve said. Of course date/time was off for some
reason. Thank you very much.
On 16 Jan 2020, at 13:48, stan wrote:
On Thu, Jan 16, 2020 at 01:43:44PM
I am using jitsi.org and tox.chat (on Linux VM).
On 1 Apr 2020, at 22:53, T. Ribbrock wrote:
> Hi all,
> with more and more colleagues and friends sitting at home, I'm
> considering installing some video call/conferencing software on my
> existing OpenBSD server.
> I currently
For a non-native English speaker like myself, it is very difficult to
read your mestuff…
On 23 Apr 2020, at 19:47, zeurk...@volny.cz wrote:
That is a rewriting of history.
It's history the way meknows it. Mecertainly predates some of it.
The disklabel format
Thanks. My bad, I’ve realized that as soon as I’ve hit the send button.
On 5 May 2020, at 17:19, Andinus wrote:
> Jan Betlach @ 2020-05-05 17:05 IST:
>> Is 6.7 being released already?
> No, they're probably using a snapshot.
Is 6.7 being released already?
On 5 May 2020, at 13:28, Groot wrote:
> I tried updating all applications, only to be greeted with
> the following message.
> doas pkg_add -u
> https://ftp.OpenBSD.org/pub/OpenBSD/6.7/packages/amd64/: no such dir
> list of applications
> I'm sure
I’ve setup Wireguard on my home router running -current.
The tunnel works, I have access to my LAN resources ONLY in case pf is
disabled. When I enable pf, Wireguard connects, does handshakes, however
I cannot even ping the router nor access anything in the network.
So that it seems my
Are you using Fastly? Try PlanetUnix, it should work…
> On 27. 2. 2021, at 15:18, Shadrock Uhuru wrote:
> system information.
> OpenBSD 6.9 GENERIC.MP#343 amd64
> flavor: current
> when i try to install texlive,
> all i get is :-
> doas pkg_add -v texlive_texmf-full
> Yes, I've used that with a couple different monitors, and a handful
> of usb-c to hdmi adapters. All worked fine, and behaved just like
> normal hdmi/dvi/vga monitors.
> Power delivery and usb also worked as expected.
> On 2021 Sep 19 (Sun) at 14:
I am on -current and considering to purchase a USB-C monitor (power
delivery to my Thinkpad over one cable).
Do USB-C dislplays work on OpenBSD?
Thanks in advance
Mail list logo