Re: PPPoE (5.9 still): https gets stuck

2016-09-20 Thread Harald Dunkel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi Stuart, On 09/16/16 14:08, Stuart Henderson wrote: > On 2016-09-14, Harald Dunkel wrote: >> >> AFAIU setting the max-mss affects TCP traffic only (e.g. HTTPS). It defines >> the maximum payload block size on sending and receiving(!) data via T

Re: PPPoE (5.9 still): https gets stuck

2016-09-16 Thread Stuart Henderson
On 2016-09-14, Harald Dunkel wrote: > > Hi folks, > > On 09/13/2016 02:58 PM, Stuart Henderson wrote: >> >> See "MTU/MSS ISSUES" in pppoe(4). >> > indeed, its documented, but its also a little bit misleading. > Reading the man page I had the first impression that modifying > the mtu and max-mss

Re: PPPoE (5.9 still): https gets stuck

2016-09-14 Thread Harald Dunkel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi folks, On 09/13/2016 02:58 PM, Stuart Henderson wrote: > > See "MTU/MSS ISSUES" in pppoe(4). > indeed, its documented, but its also a little bit misleading. Reading the man page I had the first impression that modifying the mtu and max-mss are

Re: PPPoE (5.9 still): https gets stuck

2016-09-14 Thread Christian Weisgerber
On 2016-09-13, "Peter J. Philipp" wrote: > This interests me because I'm switching to Deutsche Telekom in february > 2017. I did research back in > > march or april of 2016 on how to connect to Telekom with an allnet vdsl > modem and I came across hints that Telekom uses vlan tagging. I made >

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Harald Dunkel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi Markus, On 09/13/16 13:07, Harald Dunkel wrote: > Hi Markus, > > On 09/13/2016 12:42 PM, Markus Hennecke wrote: >> >> Damn. Of course without this line it won't work: >> >> match out on $ext_if all scrub (max-mss 1440) >> > > I have > > mat

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Stuart Henderson
On 2016-09-13, Harald Dunkel wrote: > Hi Daniel, > > On 09/13/2016 12:00 PM, Daniel Gillen wrote: >> >> I had a similar problem. In my case it had to do with Path MTU issues. >> >> This site f.ex.: http://test-ipv6.com/ will check for that. >> >> The solution for me was to switch to "jumbo" fra

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Stuart Henderson
On 2016-09-13, Harald Dunkel wrote: > Hi folks, > > I am using an openbsd (5.9) box as gateway/firewall to the > internet. ISP is Deutsche Telekom. In between is a Vigor 130 > VDSL2 modem, configured to PPPoE passthrough. The PPPoE > connection is initiated on the openbsd box. > > Problem: https v

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Kapfhammer, Stefan
160311 Grandstream HT-702 ATA ‎with fw 1.82 Telekom VDSL 50 Business Premium Works well, even with https connections. Good luck. Freundliche Grüße / Regards -stefan kapfhammer Originalnachricht Von: Harald Dunkel Gesendet: Dienstag, 13. September 2016 13:08 An: misc@openbsd.org Betreff: Re: PPPo

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Harald Dunkel
Hi Markus, On 09/13/2016 12:42 PM, Markus Hennecke wrote: >> >> I use the same VDSL modem with Deutsche Telekom and can reach >> https://telekom.de/ >> The only MTU related setting in pf.conf seems to be this: >> >> ext_if = pppoe0 >> match in on $ext_if all scrub (no-df max-mss 1440) >> >> It is

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Harald Dunkel
Hi Daniel, On 09/13/2016 12:00 PM, Daniel Gillen wrote: > > I had a similar problem. In my case it had to do with Path MTU issues. > > This site f.ex.: http://test-ipv6.com/ will check for that. > > The solution for me was to switch to "jumbo" frames below the pppoe > device (1508 bytes if I re

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Markus Hennecke
Am 13.09.2016 um 12:38 schrieb Markus Hennecke: Am 13.09.2016 um 11:51 schrieb Harald Dunkel: Hi folks, I am using an openbsd (5.9) box as gateway/firewall to the internet. ISP is Deutsche Telekom. In between is a Vigor 130 VDSL2 modem, configured to PPPoE passthrough. The PPPoE connection is i

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Markus Hennecke
Am 13.09.2016 um 11:51 schrieb Harald Dunkel: Hi folks, I am using an openbsd (5.9) box as gateway/firewall to the internet. ISP is Deutsche Telekom. In between is a Vigor 130 VDSL2 modem, configured to PPPoE passthrough. The PPPoE connection is initiated on the openbsd box. Problem: https via

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Harald Dunkel
Hi Peter, On 09/13/2016 12:13 PM, Peter J. Philipp wrote: > > can try this: > > T-Online uses vlan tag 7, IP-TV uses vlan tag 8. So it depends on your > plan I guess? I'd appreciate if someone told me if this information is > outdated but I'm probably going to have to ask in february again > a

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Peter J. Philipp
Hello Harri, This interests me because I'm switching to Deutsche Telekom in february 2017. I did research back in march or april of 2016 on how to connect to Telekom with an allnet vdsl modem and I came across hints that Telekom uses vlan tagging. I made notes but I don't know how updated they

Re: PPPoE (5.9 still): https gets stuck

2016-09-13 Thread Daniel Gillen
On 13/09/2016 11:51, Harald Dunkel wrote: > Hi folks, > > I am using an openbsd (5.9) box as gateway/firewall to the > internet. ISP is Deutsche Telekom. In between is a Vigor 130 > VDSL2 modem, configured to PPPoE passthrough. The PPPoE > connection is initiated on the openbsd box. > > Problem: