Re: [Mjpeg-users] Help reading Muxing TS

On 15/11/2011, at 4:47 PM, sam wrote: > Hi Mark, > > Thank you for your reply, > > I have hardware encoder , which gives IP out , and it has 8 > channels , each channel gives me 2 ts. > > ffmpeg will encode again , then it is no use of using my encoder. ffmpeg can be used to mux without encod

Re: [Mjpeg-users] Help reading Muxing TS

Hi Mark, Thank you for your reply, I have hardware encoder , which gives IP out , and it has 8 channels , each channel gives me 2 ts. ffmpeg will encode again , then it is no use of using my encoder. my case to mux n number of ts into single ts , which means MPTS , contains number of programs w

Re: [Mjpeg-users] Help reading Muxing TS

On 14/11/2011, at 3:37 PM, sam wrote: > Dear Friend , > > I am a professor , i want to do it for my research project for > students.partial please help me. > > I want to Multiplex n number of TS using mplex, i got downloaded > from mjpeg.sourceforge.net and installed , how to mux continuousl

Re: [Mjpeg-users] Help reading Muxing TS

Hi Sam, Sorry, I haven´t worked with the software for a long time (approx. 9 years), so I know very little about it - at that time, it was not always possible to demux all transport streams, simply because the standard was too vague. I can only refer to the mailing list mjpeg-users, which I

Re: [Mjpeg-users] Help reading Muxing TS

Hallo sam wrote: > *Dear Friend ,* > > I am a professor , i want to do it for my research project for > students.partial please help me. > > I want to Multiplex n number of TS using *mplex*, i got downloaded from > *mjpeg.sourceforge.ne *t and installed , > how to mux

Re: [Mjpeg-users] Help about VOB file creating

Hallo > I am very sorry, but this is outside my expertise - someone else who knows > ? > >> Hello >> I was developing a tool that converts a set of photos to a DVD film >> what i'm stuck in now is how to convert a stream of frames into a vob files >> using C# component >> >> If you can help me

Re: [Mjpeg-users] Help about VOB file creating

Hej Athanasius, I am very sorry, but this is outside my expertise - someone else who knows ? > Hello > I was developing a tool that converts a set of photos to a DVD film > what i'm stuck in now is how to convert a stream of frames into a vob files > using C# component > > If you can help me

Re: [Mjpeg-users] help

Hallo > Is there anyone who used the Mjpeg-tools to capture a video > from network Camera? I do not think so, sorry. How do you get the data from the network camera? auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard

Re: [Mjpeg-users] Help with mjpegtools compilation problem

On Fri, 22 Dec 2006, Stan Gammons wrote: > I have the CVS version from a couple of days ago running on SuSe 10.2 > It compiles fine as it does on SuSe 10.1 32 bit OS in each case. The 32 The URL that was giaven pointed at a "fixed in beta 2". Perhaps an earlier (snapshot or bet

Re: [Mjpeg-users] Help with mjpegtools compilation problem

On Fri, 2006-12-22 at 08:15 -0800, Steven M. Schultz wrote: > It would seem that there is a strange interaction between SuSE 10.2 > and g++ 4.1.x Hi Steven, I have the CVS version from a couple of days ago running on SuSe 10.2 It compiles fine as it does on SuSe 10.1 32 bit OS in ea

Re: [Mjpeg-users] Help with mjpegtools compilation problem

Thanks, Steven, I'll go ahead and submit the bug info, since the compiler did say I should do so ;) We'll see what happens. Regarding the supposed "fix", the bugzilla page referenced indicates the bug is 'Resolved' and comment 2 says "fixed". Not being a C++ programmer, I made an erroneous a

Re: [Mjpeg-users] Help with mjpegtools compilation problem

> From: Bob McGowan <[EMAIL PROTECTED]> > Thanks, Steven, I'll go ahead and submit the bug info, since the > compiler did say I should do so ;) We'll see what happens. Can't hurt anything ;) > Regarding the supposed "fix", the bugzilla page referenced indicates the > bug is 'Resolved'

Re: [Mjpeg-users] Help with mjpegtools compilation problem

> From: Bob McGowan <[EMAIL PROTECTED]> > > Additional background: Debian 'etch' (testing), gcc 4.1 or gcc 3.4, Sigh, seems that the gcc folks are efficient and consistent, they mananged to break both the 3.x and 4.x C++ compilers. g++ 4.0.2 works fine, g++ 2.95.3 works

Re: [Mjpeg-users] help

Nonono, I am talking about MPlayer, as on http://www.mplayerhq.hu/ _not_ Mediaplayer. I am sorry, i am not involved in video watermarking, and therefore don't know where to get these video sequences from. (anyone else ?) > yes i have tried y4m format in media player but i am unable to read or p

Re: [Mjpeg-users] Help

On Fri, 6 Feb 2004, Philip Coltart wrote: > I am using Final Cut to get a nice m2v file at 7.5 mbs and aiff audio > which I convert to MP2 using BitVice Helper. When I mux them together > in Bitvice Helper I get a nice MPEG2 with a rate of about 7.8mbs but in > the file header is a mux rate o

Re: [Mjpeg-users] Help urgently needed

On Mon, 2003-09-15 at 11:44, GMM wrote: > I am looking for a PCI - Capturecard for Linux. The card should work with > analog and digital pictures from Hi 8 and DV camcorder. If your camcorder can do DV, then probably any FireWire card will work. To capture DV on Linux, you can either use dvgrab

Re: [Mjpeg-users] Help urgently needed

On Mon, 15 Sep 2003 21:59:23 +0200, GMM <[EMAIL PROTECTED]> wrote: Thank you for your answer, but unfortunately I understand only about 10 % what you suggest. 1. What is Canopus ADVC - 100 ? An analog to digital video converter. Several people on this list use them. 2. Which Firewire card do y

Re: [Mjpeg-users] Help urgently needed

On Mon, 15 Sep 2003 20:44:51 +0200, GMM <[EMAIL PROTECTED]> wrote: Hello everyone! I urgently need your help! I am looking for a PCI - Capturecard for Linux. The card should work with analog and digital pictures from Hi 8 and DV camcorder. I use the Canopus ADVC-100 with a firewire card. The Fi

Re: [Mjpeg-users] Help urgently needed

If it's dv, why not just use firewire? Jon On Mon, 15 Sep 2003, GMM wrote: > Hello everyone! > > I urgently need your help! > > I am looking for a PCI - Capturecard for Linux. The card should work with > analog and digital pictures from Hi 8 and DV camcorder. > > I found a card which is Pinnacle

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still no sound when recording audio/video

Hallo > I seem to be running into problems recording sound under both streamer (from > XawTV) and lavrec (from mjpegtools). Using lavrec and the following script, I > get the following: Thats not good. Have you tried to record only the sound with any audio recording application ? Till you

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still nosound when recording audio/video

On Sun, 22 Jun 2003 17:05:48 -0400 Bruce Griffis <[EMAIL PROTECTED]> wrote: >INFO: [lavrec] Audio sample size: 8 bit >INFO: [lavrec] Audio sampling rate: 44100 Hz >INFO: [lavrec] Audio is MONO >INFO: [lavrec] Audio input recording level: Use mixer setting Have yo

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still nosound when recording audio/video

Just a guess (I havn't used lavrec to record), but do you have line in or whatever input your using set as the "port" to capture audio from? -- Richard Baverstock <[EMAIL PROTECTED]> --- This SF.Net email is sponsored by: INetU Attention Web

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

Thanks very much for the reply. You explain the problem very well and I know understand why what I want is very difficult to get. I tried yuvdenoise -I, to just do the deinterlace as it says in my man page, but that option no longer seems to be available, as yuvdenoise prints the usage instructio

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

>Ok, I should have read the page closer. Thing is though I want to leave >it at 30 fps as it needs to sync with some other source. When played on >the disc it is 30fps, so why can't I get 30 fps with the mpeg? It's a "you can't have it both ways" problem (and there must be something in the M

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

Ok, I should have read the page closer. Thing is though I want to leave it at 30 fps as it needs to sync with some other source. When played on the disc it is 30fps, so why can't I get 30 fps with the mpeg? On Fri, 2003-03-14 at 23:54, Matto Marjanovic wrote: > >I have an NTSC 30fps interlaced

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

>I have an NTSC 30fps interlaced laserdisc with some footage which I am >told was originally 24fps. I have run lavrec, then yuvscaler -M >LINE_SWITCH and the result looks good, except frames 4/5 from each >sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and >this interlace

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

On 14 Mar 2003, scott wrote: > I have an NTSC 30fps interlaced laserdisc with some footage which I am > told was originally 24fps. I have run lavrec, then yuvscaler -M > LINE_SWITCH and the result looks good, except frames 4/5 from each > sequence of 5 have a interlace effect. I then run yuvkinec

Re: [Mjpeg-users] Help with Buz

Hi Bruno, On Mon, 2003-02-24 at 22:30, Bruno R. Barreyra wrote: > I could not get the 0.9 driver to compile, either 0.9.1 or the CVS branch. Please report any compiler errors so I can fix it. See the FAQ for more info, it still needs tuning. Basically, *decrease* buffer size, quality etc. and se

Re: [Mjpeg-users] Help with Buz

Hallo > I'm trying (again) to get my Buz to work properly. So I've suceeded so far > in using the stable driver from CVS (straight 0.8 would not compile for me) > and installing mjpegtools-1.6.1. So you are using the CVS zoran driver version with the tag: ZORAN_VIDEODEV_2 ? > Now, I can sort of c

Re: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

"Vladimir Shved" <[EMAIL PROTECTED]> wrote > I think, someone misspelled "matroska", it should be "matreshka" or at least > would sound/look better to its true meaning . I think you guys trying to > make the name refer to russian "doll-in-the-doll" toy/souvenir but currently > the name seems to ref

Re: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

Vladimir Shved wrote: > I think, someone misspelled "matroska", it should be "matreshka" or at least > would sound/look better to its true meaning . I think you guys trying to > make the name refer to russian "doll-in-the-doll" toy/souvenir but currently > the name seems to refer to sailor girl in

RE: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

Title: RE: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container I think, someone misspelled "matroska", it should be "matreshka" or at least would sound/look better to its true meaning . I think you guy

Re: [Mjpeg-users] help needed with DV audio sync problem

tcprobe -i anyoldDVfile.avi > > Seems you are using transcode ? > > Have you ever thought about using the mjpeg tools direct with the > smilutils (I think they are called that name). Actually I do :-) but I also have transcode around and tend to occasionaly use bits of it. My vhs PAL to SVCD is

Re: [Mjpeg-users] help needed with DV audio sync problem

Hallo > I'm having problems related to loss of audio video sync when I go from DV to > (x)SVCD on long pieces of video. It would be a help if anyone who captures > with DV could let me have a copy of the output of running: > > tcprobe -i anyoldDVfile.avi Seems you are using transcode ? Have yo

Re: [Mjpeg-users] help - lavrec problems

>>>I have been unable to get streamer working satisfactorily. >> >>What sort of problems are you seeing? I'm using version 3.73 with a >>few self-written patches. > >We're straying a bit OT here but hey :-) I can accept that. :-) For everyone's info, I answered him privately, sending him the pat

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > Does --file-flush=0 make any difference? I think it does not make difference but lowering -q indeed helps. > > I'm wondering if there is a way to tell if lavrec uses zoran or > > software mjpeg codec because I cant tel

Re: [Mjpeg-users] help - lavrec problems

On Thu, 23 Jan 2003 08:16:44 -0800 Steven Boswell <[EMAIL PROTECTED]> wrote: > >I have been unable to get streamer working satisfactorily. > > What sort of problems are you seeing? I'm using version 3.73 > with a few self-written patches. We're straying a bit OT here but hey :-) I cannot get cl

Re: [Mjpeg-users] help - lavrec problems

>>My CPU just isn't fast enough to do 100% JPEG compression of incoming >>frames in real time, and I'm not willing to give up that quality. > >The Marvel does it in hardware of course That probably helps -- I have a Pinnacle PCTV. I bought it because it's a Brooktree 878 and thus well-supported

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 18:07:46 -0700 Vladimir Shved <[EMAIL PROTECTED]> wrote: > Okay, if those cards are so bad, what would be good one or is there > list of aproved sound cards? As you have a soundblaster it may be worth trying that. People seem to have good results with those. Alternatively, hun

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 16:46:42 -0800 Steven Boswell <[EMAIL PROTECTED]> wrote: > >No, but with -d 1 much above -q 50 I get dropped frames. > > That's the main reason I stopped using lavrec for doing my > recordings. My CPU just isn't fast enough to do 100% JPEG > compression of incoming frames in r

RE: [Mjpeg-users] help - lavrec problems

Hi Vladimir, On Thu, 2003-01-23 at 01:50, Vladimir Shved wrote: > > > Even if I get .avi file it does not seem to be > > > MJPEG format as I can play it on Windows 2000 machine without > MJPEG > > > codec. The most successfull command line was "lavrec -f a -i T-d 1 > > > -q 80 -U -s -R l -C us-bca

Re: [Mjpeg-users] help - lavrec problems

>>Here's the script I use to record all of my VCDs. > >I'll try it but question, what version of xawtv do you use? marvels >page on sourceforge has patches up to 3.74, which I've been trying to >use and did not like. I'm using 3.73, which came with my Red Hat 7.3. I'm also doing this on an Athlo

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > -Original Message- > From: Steven Boswell [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 22, 2003 5:47 PM > To: [EMAIL PROTECTED] > Subject: Re: [Mjpeg-users] help - lavrec problems > > > >>&quo

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > -Original Message- > From: Martin Collins [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 22, 2003 5:06 PM > To: [EMAIL PROTECTED] > Subject: Re: [Mjpeg-users] help - lavrec problems > > > On Wed, 22

Re: [Mjpeg-users] help - lavrec problems

>>"Error reading audio: Reason: Error Audio ring buffer overflow" >>errors. > >What sound card do you have? Please don't say "the one built into my >VIA mobo" :-) OK, I won't say it. LOL >>Does anyone know what is going on here? > >No, but with -d 1 much above -q 50 I get dropped frames.

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 14:13:01 -0700 Vladimir Shved <[EMAIL PROTECTED]> wrote: > After many tries I compiled and installed mjpegtools-1.6.1, no > quicktime, no divx, no Gtk+ support. Do you have the appropriate -dev packages installed? > and "Error reading audio: Reason: Error Audio ring buf

Re: [Mjpeg-users] Help for VCD from Stills

On Sonntag, 5. Januar 2003 20:57, Norman Nunn wrote: > 4. To generate cue & bin VCD image files > > vcdimager --iso-volume-label="My Text VCD" *.mpg vcdxgen *.mpg vcdxbuild videocd.xml will probably do it (except that you will have to alter the xml file to reflect the volume label). -- Hannes

Re: [Mjpeg-users] Help for VCD from Stills

Hallo > 4. To generate cue & bin VCD image files > > vcdimager --iso-volume-label="My Text VCD" *.mpg It's Not that easy. If you have still streams, you have to use a xml file as source for vcdimager that contains information about how long you want to show the still stream. Pllease take a look