Re: [modwsgi] Re: mod_wsgi prevents apache start following update
Hi Graham I have carried out the make install now and when I run the otool on the installed mod_wsgi.so I get the following result; mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) I guess that this is correct now and apache restarts without causing errors. Now just to configure httpd.conf and my virtual hosts then I can get on with playing and finding out how to take advantage of mod_wsgi over mod_python. Thanks for your help. Jake On Friday, October 5, 2012 11:54:47 PM UTC+1, Graham Dumpleton wrote: With otool -L showing the correct result, what then was the result when you tried to actually use it with Apache??? If there is still a run time linking issue causing Apache not to start, you can usually see the error by running: sudo /usr/sbin/apachectl -t It will show any linker error as output immediately. Graham On 6 October 2012 05:31, Jake jake.g...@realspaces.com javascript: wrote: With Mountain lion it comes with versions 2.3, 2.5, 2.6, 2.7. These are installed as you have correctly stated however the installation is a little different compared to a linux installation. The version 3.2 that I have installed is from the python site at the following location http://www.python.org/download/releases/3.2.3/. I took the osx 64bit installer. The installation location is as per the installer. Jake On Friday, October 5, 2012 1:42:28 AM UTC+1, Graham Dumpleton wrote: The output is correct, although one thing worried me. Can you confirm that you manually installed Python 3.2, because a system Python wouldn't be under: /Library/Frameworks/Python.framework What Python versions are under: /System/Library/Frameworks/Python.framework/Versions I ask as I am not sure what ships with Mountain Lion. Also, if Python 3.2 was installed manually, did you use the Python Software Foundation binary installer or one from somewhere else. The PSF installer is notorious for requiring --disable-framework option and I don't know what they do differently when building it to break normal framework linking. Graham On 5 October 2012 07:39, Jake jake.g...@realspaces.com wrote: Graham These are the steps that I followed and the output I received; 1. ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework 2. make 3. cd .libs 4. otool -L mod_wsgi.so Output mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) Is this the correct output??? Best regards Jake On Wednesday, October 3, 2012 10:55:45 PM UTC+1, Graham Dumpleton wrote: The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.g...@realspaces.com wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0,
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
With Mountain lion it comes with versions 2.3, 2.5, 2.6, 2.7. These are installed as you have correctly stated however the installation is a little different compared to a linux installation. The version 3.2 that I have installed is from the python site at the following location http://www.python.org/download/releases/3.2.3/. I took the osx 64bit installer. The installation location is as per the installer. Jake On Friday, October 5, 2012 1:42:28 AM UTC+1, Graham Dumpleton wrote: The output is correct, although one thing worried me. Can you confirm that you manually installed Python 3.2, because a system Python wouldn't be under: /Library/Frameworks/Python.framework What Python versions are under: /System/Library/Frameworks/Python.framework/Versions I ask as I am not sure what ships with Mountain Lion. Also, if Python 3.2 was installed manually, did you use the Python Software Foundation binary installer or one from somewhere else. The PSF installer is notorious for requiring --disable-framework option and I don't know what they do differently when building it to break normal framework linking. Graham On 5 October 2012 07:39, Jake jake.g...@realspaces.com javascript: wrote: Graham These are the steps that I followed and the output I received; 1. ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework 2. make 3. cd .libs 4. otool -L mod_wsgi.so Output mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) Is this the correct output??? Best regards Jake On Wednesday, October 3, 2012 10:55:45 PM UTC+1, Graham Dumpleton wrote: The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.g...@realspaces.com wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/W3FEnec4nRMJ. To post to this group, send email to mod...@googlegroups.com. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/U1TxsZNz-D0J. To post to this group, send email to mod...@googlegroups.comjavascript:. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com javascript:. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/E8_IpwXkYrYJ. To post to this group, send email to
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
With otool -L showing the correct result, what then was the result when you tried to actually use it with Apache??? If there is still a run time linking issue causing Apache not to start, you can usually see the error by running: sudo /usr/sbin/apachectl -t It will show any linker error as output immediately. Graham On 6 October 2012 05:31, Jake jake.griff...@realspaces.com wrote: With Mountain lion it comes with versions 2.3, 2.5, 2.6, 2.7. These are installed as you have correctly stated however the installation is a little different compared to a linux installation. The version 3.2 that I have installed is from the python site at the following location http://www.python.org/download/releases/3.2.3/. I took the osx 64bit installer. The installation location is as per the installer. Jake On Friday, October 5, 2012 1:42:28 AM UTC+1, Graham Dumpleton wrote: The output is correct, although one thing worried me. Can you confirm that you manually installed Python 3.2, because a system Python wouldn't be under: /Library/Frameworks/Python.framework What Python versions are under: /System/Library/Frameworks/Python.framework/Versions I ask as I am not sure what ships with Mountain Lion. Also, if Python 3.2 was installed manually, did you use the Python Software Foundation binary installer or one from somewhere else. The PSF installer is notorious for requiring --disable-framework option and I don't know what they do differently when building it to break normal framework linking. Graham On 5 October 2012 07:39, Jake jake.g...@realspaces.com wrote: Graham These are the steps that I followed and the output I received; 1. ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework 2. make 3. cd .libs 4. otool -L mod_wsgi.so Output mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) Is this the correct output??? Best regards Jake On Wednesday, October 3, 2012 10:55:45 PM UTC+1, Graham Dumpleton wrote: The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.g...@realspaces.com wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/W3FEnec4nRMJ. To post to this group, send email to mod...@googlegroups.com. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/U1TxsZNz-D0J. To post to this group, send email to mod...@googlegroups.com. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
Graham These are the steps that I followed and the output I received; 1. ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework 2. make 3. cd .libs 4. otool -L mod_wsgi.so Output mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) Is this the correct output??? Best regards Jake On Wednesday, October 3, 2012 10:55:45 PM UTC+1, Graham Dumpleton wrote: The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.g...@realspaces.com javascript: wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/W3FEnec4nRMJ. To post to this group, send email to mod...@googlegroups.comjavascript:. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com javascript:. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/U1TxsZNz-D0J. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en.
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
The output is correct, although one thing worried me. Can you confirm that you manually installed Python 3.2, because a system Python wouldn't be under: /Library/Frameworks/Python.framework What Python versions are under: /System/Library/Frameworks/Python.framework/Versions I ask as I am not sure what ships with Mountain Lion. Also, if Python 3.2 was installed manually, did you use the Python Software Foundation binary installer or one from somewhere else. The PSF installer is notorious for requiring --disable-framework option and I don't know what they do differently when building it to break normal framework linking. Graham On 5 October 2012 07:39, Jake jake.griff...@realspaces.com wrote: Graham These are the steps that I followed and the output I received; 1. ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework 2. make 3. cd .libs 4. otool -L mod_wsgi.so Output mod_wsgi.so: /Library/Frameworks/Python.framework/Versions/3.2/Python (compatibility version 3.2.0, current version 3.2.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) Is this the correct output??? Best regards Jake On Wednesday, October 3, 2012 10:55:45 PM UTC+1, Graham Dumpleton wrote: The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.g...@realspaces.com wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/W3FEnec4nRMJ. To post to this group, send email to mod...@googlegroups.com. To unsubscribe from this group, send email to modwsgi+u...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/U1TxsZNz-D0J. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en.
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
Run 'make distclean' in the directory before you rerun configure. You still had old build results lying around by the look of it. On 4 October 2012 05:08, Jake jake.griff...@realspaces.com wrote: Hi Graham, thanks for the pointer but it hasn't worked. Here is what I entere into terminal; hostname:mod_wsgi-3.4 user$ ./configure --with-python=/Library/Frameworks/Python.framework/Versions/3.2/bin/python3 --disable-framework checking for apxs2... no checking for apxs... /usr/sbin/apxs checking Apache version... 2.2.22 configure: creating ./config.status config.status: creating Makefile hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. hostname:mod_wsgi-3.4 user$ sudo make install Password: /usr/sbin/apxs -i -S LIBEXECDIR=/usr/libexec/apache2 -n 'mod_wsgi' mod_wsgi.la /usr/share/httpd/build/instdso.sh SH_LIBTOOL='/usr/share/apr-1/build-1/libtool' mod_wsgi.la /usr/libexec/apache2 /usr/share/apr-1/build-1/libtool --mode=install cp mod_wsgi.la /usr/libexec/apache2/ cp .libs/mod_wsgi.so /usr/libexec/apache2/mod_wsgi.so cp .libs/mod_wsgi.lai /usr/libexec/apache2/mod_wsgi.la cp .libs/mod_wsgi.a /usr/libexec/apache2/mod_wsgi.a chmod 644 /usr/libexec/apache2/mod_wsgi.a ranlib /usr/libexec/apache2/mod_wsgi.a -- Libraries have been installed in: /usr/libexec/apache2 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable during execution See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. -- chmod 755 /usr/libexec/apache2/mod_wsgi.so When I run otool I still get the same output, hostname:apache2 user$ otool -L mod_wsgi.so mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) The version of mod_wsgi is the tar that is available at the following location download here. Any ideas? Thanks Jake On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/JvTfxYObF74J. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en.
Re: [modwsgi] Re: mod_wsgi prevents apache start following update
The output you gave showed: hostname:mod_wsgi-3.4 user$ make make: Nothing to be done for `all'. which indicated that make had already been run in the directory again. From that fresh source code, do the configure and make and then run: otool -L .libs/mod_wsgi.so without doing an install. See what the local .so file is before anything gets installed. Graham On 4 October 2012 06:33, Jake jake.griff...@realspaces.com wrote: I had deleted the previous download and started with a clean one. Not sure if the 'make distclean' will do anything. I ran it anyway and got the following ; make: *** No rule to make target `distclean'. Stop. Which I think is to be expected. On Wednesday, October 3, 2012 12:02:16 AM UTC+1, Jake wrote: Hi Until recently I have developing in python using mod_python but decided to upgrade to mod_wsgi when I upgraded from os snow leopard to mountain lion. I have followed the instructions and when I restart apache it fails to start up. To throw things into the mix I am trying to run mod_wsgi on python 3.2. I think that this should work. If I run the command otool -L mod_wsgi.so I get ... mod_wsgi.so: /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 169.3.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 744.12.0) From what I can see from the notes that have been pasted this is not correct. Can anyone point me in the right direction, an idiot guide would be useful. Thanks J -- You received this message because you are subscribed to the Google Groups modwsgi group. To view this discussion on the web visit https://groups.google.com/d/msg/modwsgi/-/W3FEnec4nRMJ. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en. -- You received this message because you are subscribed to the Google Groups modwsgi group. To post to this group, send email to modwsgi@googlegroups.com. To unsubscribe from this group, send email to modwsgi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/modwsgi?hl=en.