* Omen Wild [EMAIL PROTECTED] [24-09-2002 21:24]:
Quoting Ren? Clerc [EMAIL PROTECTED] on Tue, Sep 24 19:08:
I'm looking for the S/MIME equivalent of the GnuPG option:
encrypt-to key-id
As far as I could tell, it doesn't exist. This patch add that
functionality. Set
Hi List,
after my recent update to 1.4i, I am not able able to remove any mails
out of my spool files. I can open /var/mail/jochen with vim and can
write it, but mutt refuses writing.
I found in the internet the configure switch --enable-extern-dotlock
and compiled it once more, but this did not
On Tue, 24 Sep 2002, Mike Leone wrote:
So how do all you IMAP users get an overview of all new mails per folder
when you start Mutt ? Do you have to browse each folder to see if there
are any new mails ??
Yes. :-( The change-folder command (normally c) shows no new mail
indicator, when
Hello
I have problems with compilation mutt with Solaris 7.
Libivconv 1.8 has been previously installed, but
with gcc 2.95.3 (not 3.0).
I attempt to configure mutt with gcc 2.95.3
on my Solaris7 system (gcc 3.0 does not properly work)
an such error has been reported after ./configure
command:
* René Clerc [EMAIL PROTECTED] [25-09-2002 10:30]:
This patch makes mutt segfault right after sending the e-mail. Despite
of this, it works: both recipient and I are able to decrypt and read
the message.
A clue, anyone?
Let me be more specific: like I've already mailed Omen, I applied the
The command:
send-hook '~h address' command
causes Mutt to generate an error h: not supported in this mode that
isn't documented anywhere. How do I get a send-hook to match a pattern
within a custom header of the current message? Thanks in advance.
--
Eugene Lee
[EMAIL PROTECTED]
Hi List,
after my recent update to 1.4i, I am not able able to remove any mails
out of my spool files. I can open /var/mail/jochen with vim and can
write it, but mutt refuses writing.
I found in the internet the configure switch --enable-extern-dotlock
and compiled it once more, but this did not
* René Clerc [EMAIL PROTECTED] [25-09-2002 14:25]:
* René Clerc [EMAIL PROTECTED] [25-09-2002 10:30]:
This patch makes mutt segfault right after sending the e-mail. Despite
of this, it works: both recipient and I are able to decrypt and read
the message.
A clue, anyone?
Let me
Hi,
i don't realy have a problem but, its a litle strange...
When i set:
bind compose ^T complete-query
in .muttrc, i get:
complete-query: unknown command
when i start mutt.
But CTRL-T works works in the Compose-Screen.
When i remove the set from my .muttrc there is no error during
* René Clerc [EMAIL PROTECTED] [25-09-2002 14:47]:
* René Clerc [EMAIL PROTECTED] [25-09-2002 14:25]:
* René Clerc [EMAIL PROTECTED] [25-09-2002 10:30]:
This patch makes mutt segfault right after sending the e-mail. Despite
of this, it works: both recipient and I are able to
Hi, all.
I'm using 'mutt -y' alot to monitor my mailboxes, and I have this to be
able to see where I have new mail: bind browser $ check-new
Although I'm experienceing some buggy behaivor by mutt. Sometimes (I
can't see a pattern) it doesn't give the mailbox the N flag marking
new mails,
* Johan Svedberg [EMAIL PROTECTED] [2002-09-25 13:15]:
I'm using 'mutt -y' alot to monitor my mailboxes, and I have
this to be able to see where I have new mail: bind browser $
check-new Although I'm experienceing some buggy behaivor by
mutt. Sometimes (I can't see a pattern) it doesn't give
Jochen --
...and then jochen issing said...
%
% Hi List,
Hello!
%
% after my recent update to 1.4i, I am not able able to remove any mails
How did you install mutt? Were you root, or just jochen?
% out of my spool files. I can open /var/mail/jochen with vim and can
% write it, but mutt
Jochen --
...and then jochen issing said...
%
% after my recent update to 1.4i, I am not able able to remove any mails
What, it's still that way an hour later?
See my reply to your first post :-)
HTH HAND
:-D
--
David T-G * It's easier to fight for one's principles
* Eugene Lee [EMAIL PROTECTED] [2002-09-25 12:33]:
The command send-hook '~h address' command
causes Mutt to generate an error h: not supported
in this mode that isn't documented anywhere.
one more thing to fix in the documentation then.
How do I get a send-hook to match a pattern
* jochen issing [EMAIL PROTECTED] [2002-09-25 12:39]:
after my recent update to 1.4i, I am not able able to remove
any mails out of my spool files. I can open /var/mail/jochen
with vim and can write it, but mutt refuses writing.
sounds like a locking problem..
I found in the internet the
Hi all,
I would like to bounce emails with a command line entry. Is there a way to
do this with mutt? I read through the manual of how it does thru the
interface but not how it can be done from the command line.
Any help would be appreciated.
Thanks in advance
Frank
mailto:[EMAIL PROTECTED]
Hi,
Although I was planning to go back to evolution, I'm still trying mutt
(it's so cool:)
Now, I have the following question: is it possible to define different
'archive' folders for messages per folder ? What I want to achieve is, when
I press 's' for a message in (imap)folder Inbox.Test I
On Wed, Sep 25, 2002 at 03:37:12PM +0200, Sven Guckes wrote:
* jochen issing [EMAIL PROTECTED] [2002-09-25 12:39]:
after my recent update to 1.4i, I am not able able to remove
any mails out of my spool files. I can open /var/mail/jochen
with vim and can write it, but mutt refuses writing.
Quoting Ren? Clerc [EMAIL PROTECTED] on Wed, Sep 25 15:01:
Typically PEBCAK. The segfault was a result of not setting this
variable. Strange side-effect, of course, but it works now!
I'll look into this. If that's the cause, then the problem is between
my keyboard and chair, not yours. ;-)
* Sascha Huedepohl [EMAIL PROTECTED] [2002-09-25 12:54]:
i don't realy have a problem but, its a litle strange...
When i set bind compose ^T complete-query in .muttrc,
i get: complete-query: unknown command when i start mutt.
feature.
But CTRL-T works works in the Compose-Screen.
wrong.
* Bright, Frank [EMAIL PROTECTED] [2002-09-25 14:25]:
I would like to bounce emails with a command line entry.
Is there a way to do this with mutt?
no.
but what does it take to make you use proper sigdashes? *hrmpf*
Sven
* D. J. Bolderman [EMAIL PROTECTED] [2002-09-25 14:37]:
is it possible to define different 'archive' folders for messages per
folder ? What I want to achieve is, when I press 's' for a message in
(imap)folder Inbox.Test I want to save the message automatically to
Inbox.Test.Archive without
* Andy Wilson [EMAIL PROTECTED] [2002-09-25 14:45]:
Is there a way to follow URL links in mutt?
man urlview
--
Andy
There are 10 kinds of people in the world: Those who understand binary, and
On Wed, 25 Sep 2002, Andy Wilson wrote:
Is there a way to follow URL links in mutt?
Try urlview (^B)
On Wed, Sep 25, 2002 at 04:30:33PM +0200, D. J. Bolderman wrote:
Hi,
Although I was planning to go back to evolution, I'm still trying mutt
(it's so cool:)
Now, I have the following question: is it possible to define different
'archive' folders for messages per folder ? What I want to
* David Ellement [EMAIL PROTECTED] [2002-09-24 23:21]:
then again, you did not describe the purpose of this idea
so i'm just wasting my time with guesses again.
I suppose it is silly...
I typically have a couple of projects going where I'm part of a small
team here, working with another
On Wed, Sep 25, 2002 at 04:34:57PM +0200, jochen issing wrote:
On Wed, Sep 25, 2002 at 03:37:12PM +0200, Sven Guckes wrote:
* jochen issing [EMAIL PROTECTED] [2002-09-25 12:39]:
after my recent update to 1.4i, I am not able able to remove
any mails out of my spool files. I can open
On Wed, Sep 25, 2002 at 02:33:24PM +0200, jochen issing wrote:
Hi List,
after my recent update to 1.4i, I am not able able to remove any mails
out of my spool files. I can open /var/mail/jochen with vim and can
write it, but mutt refuses writing.
I found in the internet the configure
hi.
i'm going out of town for a week tomorrow. i've never done an auto-reply
(i'm out of town till next year) type of thing. i checked some mutt FAQs
and sifted through man mutt and man muttrc but didn't see anything alluding
to this sort of thing.
is this something i can do with Mutt in a
Now, I have the following question: is it possible to define different
'archive' folders for messages per folder ? What I want to achieve is, when
I press 's' for a message in (imap)folder Inbox.Test I want to save the
message automatically to Inbox.Test.Archive without looking up the
* On 2002.09.25, in [EMAIL PROTECTED],
* Bright, Frank [EMAIL PROTECTED] wrote:
I would like to bounce emails with a command line entry. Is there a way to
do this with mutt? I read through the manual of how it does thru the
interface but not how it can be done from the command line.
* Sven Guckes ([EMAIL PROTECTED]) wrote:
* Sascha Huedepohl [EMAIL PROTECTED] [2002-09-25 12:54]:
i don't realy have a problem but, its a litle strange...
When i set bind compose ^T complete-query in .muttrc,
i get: complete-query: unknown command when i start mutt.
complete-query is
On Wed, Sep 25, 2002 at 10:04:15AM -0500, Fred Dech wrote:
hi.
i'm going out of town for a week tomorrow. i've never done an auto-reply
(i'm out of town till next year) type of thing. i checked some mutt FAQs
and sifted through man mutt and man muttrc but didn't see anything alluding
to
* jochen issing [EMAIL PROTECTED] [2002-09-25 16:25]:
after my recent update to 1.4i, I am not able able to remove any mails
out of my spool files. I can open /var/mail/jochen with vim and can
write it, but mutt refuses writing.
Ah, I have solved the Problem!!
It was the directory access
* Fred Dech [EMAIL PROTECTED] [2002-09-25 16:40]:
i'm going out of town for a week tomorrow. i've never done an
auto-reply (i'm out of town till next year) type of thing.
i checked some mutt FAQs and sifted through man mutt and man
muttrc but didn't see anything alluding to this sort of
On Sep 25 2002, Erik Christiansen shared a puddle of experience:
snip
(Of the 2247 advertising spams I've received since February, 1899
were html.)
Am I the only one who read that as February 1899 and thought what,
they had the internet back *then*?
Laurabelle
--
ASCII silly question, get
Laurabelle said:
On Sep 25 2002, Erik Christiansen shared a puddle of experience:
snip
(Of the 2247 advertising spams I've received since February, 1899
were html.)
Am I the only one who read that as February 1899 and thought what,
they had the internet back *then*?
Yes, but only
Hi,
I'm having some difficulties on using folder-hooks. For some reason, my
folder-hooks are not 'executed'
Relevant lines in my .hooks file:
send-hook . my_hdr From: normal mail account
send-hook mutt-users my_hdr From: list account
folder-hook '!'INBOX.MailingLists.Mutt my_hdr From: list
On Wed, Sep 25, 2002 at 12:46:30PM -0400, Ricardo SIGNES wrote:
On Wed, Sep 25, 2002 at 10:04:15AM -0500, Fred Dech wrote:
hi.
i'm going out of town for a week tomorrow. i've never done an auto-reply
(i'm out of town till next year) type of thing. i checked some mutt FAQs
and
On Wed, Sep 25, 2002 at 03:30:31PM +0200, Sven Guckes wrote:
* Johan Svedberg [EMAIL PROTECTED] [2002-09-25 13:15]:
I'm using 'mutt -y' alot to monitor my mailboxes, and I have
this to be able to see where I have new mail: bind browser $
check-new Although I'm experienceing some buggy
On Tue, 24 Sep 2002, Sven Guckes wrote:
set index_format=%4C %Z %[!%y%m%d] %-17.17F (%3l) %s
you are mixing up %Z with %F there. rtfm.
thank you Sven. I read the fine manual a few times and can't find
--you know, it's part of human nature to make the same mistake more
than once,
On Wed, Sep 25, 2002 at 12:42:36PM -0700, Rob Lingelbach wrote:
set index_format=%4C %Z %[!%y%m%d] %-17.17F (%3l) %s
thank you Sven. I read the fine manual a few times and can't find
--you know, it's part of human nature to make the same mistake more
than once, according to physicist
Hello,
can mutt reread hiis configuration file ~/.muttrc? Has mutt command
source like VIM?
Regards
--
Hans Ginzel
http://interviews.slashdot.org/article.pl?sid=02/09/06/1343222
Hello,
In the view attachements menu I see name of attachement
=?iso-8859-2?Q?poutn=ED_slavnost_SW.doc?
I thing this encoding is used in mail headers. Is it correct to use it
also in attachement names? Does mutt support such names? I want to
decode them when viewing name or saving
On Wed, Sep 25, 2002 at 10:31:26PM +0200, Hans Ginzel wrote:
can mutt reread hiis configuration file ~/.muttrc? Has mutt command
source like VIM?
It's so similar, it's got the same name.
Please look at the man page for muttrc. You'll find an entry for the command
source.
Thus spake Hans Ginzel ([EMAIL PROTECTED]):
can mutt reread hiis configuration file ~/.muttrc? Has mutt command
source like VIM?
¸
| :source /path/to/.muttrc
`
--
The student in question is performing minimally for his peer group and
is an emerging underachiever.
Make sure you have environment variables LD_RUN_PATH and LD_LIBRARY_PATH set
to /usr/local/lib.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Piotr Kasztelowicz
Sent: Wednesday, 25 September 2002 21:53
To: [EMAIL PROTECTED]
Subject: Problems with mutt
Hi,
I want to color my headers, but something goes wrong here. For example:
I have the subject colored white, with a blue background, but the rest of the
line stays black... I've searched the archives but didn't find a proper
solution.
I'm using 'color index white blue ^Subject:
--
D.J.
On Wed, Sep 25, 2002 at 04:39:41PM -0400, Ricardo SIGNES wrote:
can mutt reread hiis configuration file ~/.muttrc?
Has mutt command source like VIM?
source filename
The given file will be evaluated as a configuration file.
But how to get rid of lines that are
On Wed, Sep 25, 2002 at 03:34:50PM +0200, Sven Guckes wrote:
:
: * Eugene Lee [EMAIL PROTECTED] [2002-09-25 12:33]:
:
: The command send-hook '~h address' command
: causes Mutt to generate an error h: not supported
: in this mode that isn't documented anywhere.
:
: one more thing to
On Wed, Sep 25, 2002 at 11:36:38PM +0200, Hans Ginzel wrote:
Something like:
:function reread_cfg_files
: reset all options to compile time
: source startup files as by usual start
:endfunction
--
At the top of your .muttrc
unset *
unhook *
should do
Hans Ginzel [EMAIL PROTECTED] wrote:
Has mutt command source like VIM?
[yes]
But how to get rid of lines that are no more in new config file?
Quit and restart mutt.
Charles
--
---
Charles Cazabon
* On Wed, 25 Sep 2002, D. J. Bolderman wrote:
I want to color my headers, but something goes wrong here. For
example: I have the subject colored white, with a blue
background, but the rest of the line stays black... I've
searched the archives but didn't find a proper solution.
I'm using
* On Wed, 25 Sep 2002, D. J. Bolderman wrote:
I've searched the archives but didn't find a proper solution.
See the Header color thread from July 25, 2002, for one
discussion of this.
--
John
On Wed, Sep 25, 2002 at 03:34:58PM -0700, John Iverson wrote:
* On Wed, 25 Sep 2002, D. J. Bolderman wrote:
I want to color my headers, but something goes wrong here. For
example: I have the subject colored white, with a blue
background, but the rest of the line stays black... I've
On Wed, 25 Sep 2002, Thomas Dickey wrote:
I want to color my headers, but something goes wrong here. For
example: I have the subject colored white, with a blue
background, but the rest of the line stays black... I've
searched the archives but didn't find a proper solution.
I
On Thu, Sep 26, 2002 at 01:24:29AM +0200, D. J. Bolderman wrote:
On Wed, 25 Sep 2002, Thomas Dickey wrote:
I want to color my headers, but something goes wrong here. For
example: I have the subject colored white, with a blue
background, but the rest of the line stays black... I've
On Wed, 25 Sep 2002, Thomas Dickey wrote:
So how do I get Mutt to call ncurses then ? Do I have to recompile or
something ??
mutt does - but there are some missing pieces. The calls using the macro
BKGDSET are either incomplete, or there is needed some related calls to the
bkgd
On Thu, Sep 26, 2002 at 02:01:25AM +0200, D. J. Bolderman wrote:
On Wed, 25 Sep 2002, Thomas Dickey wrote:
So how do I get Mutt to call ncurses then ? Do I have to recompile or
something ??
mutt does - but there are some missing pieces. The calls using the macro
BKGDSET are
Hans Ginzel wrote:
In the view attachements menu I see name of attachement
=?iso-8859-2?Q?poutn=ED_slavnost_SW.doc?
I thing this encoding is used in mail headers. Is it correct to use it
also in attachement names? Does mutt support such names? I want to
decode them when viewing name
* D. J. Bolderman [EMAIL PROTECTED] [2002-09-25 18:47]:
I'm having some difficulties on using folder-hooks.
For some reason, my folder-hooks are not 'executed'
Relevant lines in my .hooks file:
send-hook . my_hdr From: normal mail account
send-hook mutt-users my_hdr From: list account
* On Sep 25 2002, Erik Christiansen..:
Of the 2247 advertising spams I've received
since February, 1899 were html.
* Laurabelle said:
Am I the only one who read that as February 1899 and
thought what, they had the internet back *then*?
* Michael Leone [EMAIL PROTECTED] [2002-09-25 18:37]:
I have a request from one of my users to make mutt have a small bit of pine-like
functionality.
When one scrolls to the bottom of the index in pine, it refreshes the page,
and puts the last message at the top of the screen and continues.
Is there any way to make mutt do this? Thanks.
-D
--
On Thu, 26 Sep 2002, Sven Guckes wrote:
I'm having some difficulties on using folder-hooks.
For some reason, my folder-hooks are not 'executed'
Relevant lines in my .hooks file:
send-hook . my_hdr From: normal mail account
send-hook mutt-users my_hdr From: list account
* On Wed, 25 Sep 2002, Thomas Dickey wrote:
On Wed, Sep 25, 2002 at 03:34:58PM -0700, John Iverson wrote:
* On Wed, 25 Sep 2002, D. J. Bolderman wrote:
I want to color my headers, but something goes wrong here. For
example: I have the subject colored white, with a blue
background,
* Johan Svedberg [EMAIL PROTECTED] [2002-09-25 19:04]:
On Wed, Sep 25, 2002 at 03:30:31PM +0200, Sven Guckes wrote:
* Johan Svedberg [EMAIL PROTECTED] [2002-09-25 13:15]:
I'm using 'mutt -y' alot to monitor my mailboxes, and I have
this to be able to see where I have new mail: bind
* Dan Sully [EMAIL PROTECTED] [2002-09-26 01:37]:
I have a request from one of my users to make mutt
have a small bit of pine-like functionality.
uh-oh..
When one scrolls to the bottom of the index in pine,
it refreshes the page, and puts the last message
at the top of the screen and
On Wed, Sep 25, 2002 at 06:32:07PM -0700, Dan Sully wrote:
I have a request from one of my users to make mutt have a small bit of pine-like
functionality.
When one scrolls to the bottom of the index in pine, it refreshes the page,
and puts the last message at the top of the screen and
* D. J. Bolderman [EMAIL PROTECTED] [2002-09-26 01:44]:
send-hook . my_hdr From: normal mail account
send-hook mutt-users my_hdr From: list account
folder-hook '!'INBOX.MailingLists.Mutt my_hdr From: list account
[..] So, it seems that the folder-hook setting is not used, but
* Burton Samograd [EMAIL PROTECTED] [2002-09-26 02:19]:
On Wed, Sep 25, 2002 at 06:32:07PM -0700, Dan Sully wrote:
I have a request from one of my users to make mutt have a small
bit of pine-like functionality.
When one scrolls to the bottom of the index in pine, it refreshes the page,
* Sven Guckes ([EMAIL PROTECTED]) wrote this on 09 25, 02 at 21:26:
* On Sep 25 2002, Erik Christiansen..:
Of the 2247 advertising spams I've received
since February, 1899 were html.
* Laurabelle said:
Am I the only one who read that as February 1899 and
thought what, they had the
On Thu, 26 Sep 2002, Sven Guckes wrote:
let's see...
$ cat muttrc.test
set autoedit
set edit_headers
send-hook . my_hdr From: me a@b
folder-hook +empty my_hdr From: me c@d
folder-hook +empty my_hdr Subject: test
$ mutt -n -F muttrc.test -f /dev/null
sending a
Once upon a time Burton Samograd shaped the electrons to say...
Check the menu_scroll variable. If it's set to yes it will scroll a
single line at a time, if it's unset it will scroll by page.
This is what I need - thanks!
-D
--
heathen i can type with my vagina!
74 matches
Mail list logo
