A JM wrote:
Responding to my own thread. The answer was that gcc-3.2 and g++-3.2
were not installed I also enabled memalign and the error disappeared
when running ./configure.
Currently the XBOX has been compiling for nearly 24 hours, this is
insane! How much longer can it go
distcc.
Kichigai Mentat wrote:
On Jan 4, 2006, at 19.18, Cecil Watson wrote:
Get it while it is hot!
http://mysettopbox.tv
http://mysettopbox.tv/knoppmyth.html
http://mysettopbox.tv/CHANGELOG.txt
Regards,
Cecil
I just installed R5A30, and all I had to do was tweak one channel
setting so I
Get it while it is hot!
http://mysettopbox.tv
http://mysettopbox.tv/knoppmyth.html
http://mysettopbox.tv/CHANGELOG.txt
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Larry's Club Cars wrote:
With a wireless keyboard and wireless mouse
in the frontend, do I really need a remote control?
No.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Larry wrote:
If the frontend is running in some kind of diskless mode,
does it help if the hard disk has a linux swap partition?
How can you run diskless yet have a swap partition?
If yes, how big should the linux swap be given
that this is media client?
No, you don't really need one.
Kichigai Mentat wrote:
Hello. I'm running a KnoppMyth back-end that's got version R5A26.
However, I've discovered that it's got more than a couple unfortunate
flaws that hinder (IE completely prevent) working with a front-end.
http://mysettopbox.tv/phpBB2/viewtopic.php?t=7066
I'd suggest
Nick wrote:
On 05/12/05, Cecil Watson [EMAIL PROTECTED] wrote:
I've ran into an anomalous issue reorganizing my home entertainment
system this weekend. I have a master and a slave backend.
Unfortunately, my slave cannot connect to the master. I get a string of:
2005-12-04 17:39:48.266
Marcus wrote:
I'm new to MythTV. If I use KnoppMyth do I only need a free partition? Can I
specify which partition to install to?
Reading the docs it seemed like it would automatically install to hda1.
Yes, it will do an auto install _if_ you select auto install. You can
do a manual install
I've ran into an anomalous issue reorganizing my home entertainment
system this weekend. I have a master and a slave backend.
Unfortunately, my slave cannot connect to the master. I get a string of:
2005-12-04 17:39:48.266 Connecting to master server: :6543
2005-12-04 17:39:49.081 Connection to
[EMAIL PROTECTED] wrote:
I've got a two-machine MBE/SBE setup running 1.18.1. (The SBE is
also being used as my FE; the SBE's NFS-mounts its video-storage
dir on the MBE and hence stores its video there.)
I've noticed that if I have to reboot the MBE, then even after it's
come back up, and
Andrew Close wrote:
On 11/30/05, Roger Hanson [EMAIL PROTECTED] wrote:
I haven't been able to get to the KnoppMyth site at www.mysettopbox.tv
today - both the website and the forum.
Is it just me, or does everyone see it down?
looks like it's down for me too (just to confirm).
Cecil
Isaac Richards wrote:
On Monday 21 November 2005 11:43 pm, Cecil Watson wrote:
My humble apologies for including a SVN version in R5A22. It was a
mistake. This has been rectified alnog with a few other small fixes.
Thanks! =)
Isaac
You're welcome.
Cecil
Again my apologies... Seems Edison is quite done with thier work. The
site will be down tomorrow for 7:00 AM PST to 3:00 PM PST.
Best regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
Sergio P. Cesar wrote:
Has anyone been able to get this to work with a DishNetwork HD receiver
and change the channel?
I am looking for a HOWTO, or a script to use the USB port IR transmitter.
Thanks
http://mysettopbox.tv/phpBB2/viewtopic.php?t=6206
Regards,
Cecil
. The ssh host keys don't get created
automatically, should I just go ahead and create the host keys
manually?. This brings me to the question, which parts of the
file system will be writable?
Thanks,
Alberto
On Thu, 2005-10-20 at 23:08 -0700, Cecil Watson wrote:
Alberto Alonso wrote:
Does
Alberto Alonso wrote:
Does KnoppMyth support hardware acceleration for cle266?
I seem to remember a reference to this when I was booting
once, but can't seem to find the right references now.
I have an M6000 and it just doesn't have enough juice
to be a front end without it.
Thanks,
Alberto
[EMAIL PROTECTED] wrote:
Hi,
I would like to transcode my .nuv files with XviD codec. But when I run
nuvexport, XviD is disabled. The program tells me my ffmpeg doesn't support
encoding to XviD and I have to compile it with the --enable-xvid option. But
this option seems to be inexistant. I
Hello Everyone,
Get it while it is hot!
http://mysettopbox.tv/phpBB2/viewtopic.php?t=6497
Some of the highlights:
First KRP-aware release.
* Integrated KRP logic into installation and configuration scripts.
* Dragon installation and configuration 99% automated.
* Added
My apologies to Isaac and the rest of the list. I really don't like to
post off-topic. Hopfully this will stem the what happened to the
KnoppMyth site? questions... Due to work being done on the power lines
in my area, the site will be down. This outage will occur from
approximately 8:00
ToadMazter wrote:
I just noticed that the ivtv 4.x drivers are now on ATRPMS. Has anyone been
succesful with these and the PVR-150/500, and can it co-reside with the
HD-3000 DVB drivers?
Not that I'm using Fedora, but yes.
Regards,
Cecil
___
Azmat wrote:
Hi,
I'm not sure if this has been asked before or if its even possible, but is
there any way to mount two HD's to a single mounting point in Linux? I just
added a second HD to my mythbox and was hoping there might be a way for
/video to point to both of them. Thanks.
Azmat
LVM.
A JM wrote:
Since the directory on the BE that holds the movie posters is hidden and in
the directory '/root/.mythtv/mythvideo' how do I get the front end to read
this directory? Can I create a link that the front end can read?
Thanks for any help you guys can give me.
AJM,
You SHOULDN'T be
Jim Reith wrote:
On 8-Sep-05, at 10:20 AM, Jim Reith wrote:
I've got 550gb of videos I'd like to salvage if possible. my
other choice is to swap in a virgin drive and rebuild on that and
then copy
the root over onto the bad partition once it's up and running
I'm certainly not an expert
You'll find that Linux isn't that stable when it comes to using MythTV. I
have found memory leaks in either my sound card driver or the MythTV program
itself (sound quits working after a couple of days).
Funny, I've been used MythTV for over 2 years now and have had very
little issues with
Blake wrote:
I'm setting up my MythTV. Just got the machine I want to use and have
hit my first snag.
The S-Video out is different from any of the other S-Videos I have.
It's got holes for about 8 pins. I'm now rummaging through my cable box
trying to find one that fits.
Does this bode
James Ogle wrote:
KnoppMyth comes with motion in the default install, it watches for
movement on the camera and when it detects it, saves a recording you can
view with mythVideo. I haven't tried it myself but I've been thinking I
should
KnoppMyth came with motion in version prior to R5.
Hello,
Mike Daugird wrote:
Hello, this is my first post so please bear with me.
I have a P3 933 mhz, the PVR-350 with grey remote, and an old Nvidia TNT2 in
the AGP slot.
MythTV comes up and I escape out to the command line.
I type
lircd start
and then I try to run
irw
when I hit buttons
Hello,
Chad Delatte wrote:
Hey guys, just curoius if xine display dvd info such
as dvd name/ time and such thru lcdproc. If not does
it od it on any of the dvd players myth uses? If so
where do I enable this?
Thanks,
Chad
http://xinehq.de/index.php/faq
Hello,
Gerald J. Berg wrote:
We are all happy to see major releases of MythTV with its new features and
benefits.
Aren't we all?! :)
I am also happy to see MythTV runs successfully on so many Linux
implementations. It is a bit hard to keep up with the methods used by each
implementation
Dudely Smith wrote:
I too emailed him, and never got a reply, so much for support :/
Support? Building the debs is something Matt does in his spare time.
He has a job and other responsibilities. There is nothing preventing
you from taking his diff and producing your own deb (ever read the
Hello,
Marius Schrecker wrote:
Just wanting to check what the latest recommendation is for pvr-500 with
ivtv 0.3.7b
Cheers!
Marius
Registered Linux user
http://sourceforge.net/mail/?group_id=73219
Regards,
Cecil
___
mythtv-users mailing list
Hello,
Marius Schrecker wrote:
Hi, I'm getting this when I start MPlayer:
vo: X11 running at 1024x768 with depth 24 and 32 bpp (:0 = local display)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Inappropriate ioctl for
device
Try adding echo 1024 /proc/sys/dev/rtc/max-user-freq to your
Mike Green wrote:
I have a couple of problems that I hope someone else has already solved...
First, does anyone have any idea how to get X/Myth to use all of the screen
real estate on a high defintion televsion? I recently purchased a sony
wega KD-30XS955, I would really like to be able to
antec wrote:
I apologise for my hot-headedness.
I gave KnoppMyth a go first off and my bt878 got blacklisted. There was
nothing configurable on this DELL bios so I scrapped that.
Define blacklisted and which version of KnoppMyth did you try?
Thanks,
Cecil
Hello
Ravi Malghan wrote:
Hi: I couldn't find this info. Wondering which OS
(name and version) is recommended to run mythTV?
Thanks
Ravi
Linux. You can find more requirements here:
http://www.mythtv.org/modules.php?name=MythInfo
Regards,
Cecil
Nick Rout wrote:
Does anyone know of a distro that boots off a CD and runs mythfrontend?
I have a few windows boxes around the house that the family refuses to
change to a decent OS, and WinMYTH seems to be a dog.
Yes.
But if I could boot off a CD and run the frontend entirely off the CD,
it
Thom Paine wrote:
I know everyone has their preference, and I've used RedHat for a long
time, but for ease of installation and maintenance, what are some of
the other installs that people are using?
KnoppMyth!
I tried MythDora, and I always seem to have some sort of a snag. Just
when I
Hello,
Johnny Lee wrote:
I know a lot of you are going to have difference opinions but which should
I buy? I am currently going to purchase a PCI card for a smaller desktop
box to transfer my mythtv box into. The 2 cheapest PCI cards with S-Video
out I could find are the MX4000 and the 9200SE.
Devan Lippman wrote:
Trying to figure out where the VCD settings are...
Currently I have mythdvd using mplayer and this works for DVDs but when I
try a VCD it doesn't work (nothing happens). I know that the VCD will work
in mplayer outside of Myth.
Then give it the same parameters you use
Warpme wrote:
Hello World,
I have problems with finding answer for following question:
Has KnoppMyth 5A16 integrated VIA unichrome drivers for CLE266 (EPIA
M10K) ?
Yes.
Why this question ?
I found very interesting page about tuning TVout signal quality:
Hello,
Todd Bailey wrote:
Just my 2 cents here.
Just my 2 cents.
I think 2 more items that need to be considered is system stability, and
ease of installation.
None of the replies I read so far mention how stable myth is when
compared to beyond.
What do you expect? You are on the MythTV
Hello,
Tachtevrenidis, Kosta wrote:
Can I make Myth TV not record live TV when I don't want it? Let's say I
am doing something data bound on my MythTV box and I don't want mythtv
to add to the load by recording live TV. Can I do that?
Kosta
Yes, don't watch live TV.
Regards,
Cecil
PS:
Hello,
Ricardo Kleemann wrote:
Hi,
Sorry this maybe a little off-topic, but I installed knoppmyth and I'm
trying to install other apps on top of it. Knoppmyth is based on
debian, which I'm not too familiar with.
Why not use the KnoppMyth forum? This is after all the MythTV mailing list.
Cyber Source wrote:
Hello all,
I wonder if anyone can help. I've got the latest MythTV running on an
AverMedia PCI Tuner card with a SCSI based system. I have had similar
setups on other systems with the same type of TV card and SCSI drives
but this one is REALLY bad performance. Live TV
Ashu Desai wrote:
Can I ask a really stupid question? I know i can download some stuff
from a website by the command
wget http://
wget http://thefullpath/to/file
how do i install it?
rpm -i package
dpkg -i package
tar xjvf package.tar.bz2
cd package
./configure
make
make install
Hello,
Gregg wrote:
I upgraded my fc3 kernel from 2.6.10 to 2.6.11-1.14_FC3 because my
ivtv drivers were not working. Now they do, but when I try to
modprobe cx88-dvb I get [EMAIL PROTECTED] 2.6.11-1.14_FC3]#
modprobe cx88-dvb
FATAL: Error inserting cx88_dvb
Hello Everyone,
Minor updates and additional packages.
http://mysettopbox.tv
http://mysettopbox.tv/CHANGELOG.txt
http://mysettopbox.tv/phpBB2/index.php
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
Hello,
brian mcgann wrote:
Hi folks,
I'm wondering if there is a reason I shouldn't try building MPlayer as a shared
library. Has anyone done this? I've made an initial, exploratory attempt, but
there are modules that don't like to be compiled with position independent
code. Before I spend
Hello,
Shaun Jackman wrote:
Hello Matt,
Will your MythTV package be uploaded to Debian? Or are there the usual
patent woes or something else perhaps? No doubt this is a FAQ, but I
wasn't able to find an answer on wnpp or using Google. Perhaps a
comment in README.Debian would be warranted. Thanks
Hello,
Torsten Schenkel wrote:
Hi All,
trying to get the epia ready for switching from PVR350 Tv-Out to the
unichrome VGA out.
All the stuff from
http://www.physik.fu-berlin.de/~glaweh/debian
is in place -- and didn't even break anything so far :-) -- but the
drm module won't compile. Wether I
Seth Heckard wrote:
I know there has been a lot of discussions here lately about HDTV
decoding and processor speeds and such, however I get the feeling that
the recommended 3GHz P4 spec is a little overkill.
There is a reason why it is recommend.
Basically, I am asking for the slowest (and
Hello,
Keith Jones wrote:
I have two pvr250s in my backend box (FC3)
I recently upgraded to 0.18 now both pvr250s show up as pvr150s
Has anyone had this issue?
Does anyone have a fix or know what might be happening?
Thanks for any help
Perhaps addressing this on the IvyTV mail list would be
Howdy,
Griffon -- wrote:
Two months from today.
Features required:
On demand start playback of Gallery after starting music active que/play-list.
Have UI elements to adjust what is the start gallery folder.
Recursive lookup in gallery allowing pics in sub folders to play.
Have UI elements for
Hello,
Preet Khalsa wrote:
Or just 'mysqlcheck mythconverg'...
Ohh I like that one. Very interesting reading. I didn't realize that I
had more than one table corrupted.
Thanks !!!
It is always a good idea to check the entire db after a crash.
Regards,
Cecil
Hello,
Andy Foster wrote:
I understand there are currently some ongoing 0.17+ issues with
playback which may or may not be codec, hardware or performance
related, and just wanted to find out if this explains the rather
bizarre symptoms I'm getting. To summarise:
1. During watching tv (no
Hello,
Tomi Makinen wrote:
Hey,
I have problems that I cannot fix with updating fc3 and mythtv.
Subject in this mailing list
is updating mythtv does not work. Apt-get just messes my mythtvsetup.
I was wondering if I should try knoppmyth. Last time I tried it, it
would not install, because
I only
John Kuhn wrote:
R5A18 was released today with 0.18 built in
--John
I have a Mythtv 0.18 setup which works very well on Fedora Core 3
usinf a Skystar 2 DVB-S board. If I use Knoppmyth R5A15 on a client
computer a fault occurs which involvers Protocol 15. Protocol 15 is
not available yet on
Jonathan Markevich wrote:
Very exciting!
Can this be dist-upgraded to, or is it another reinstall calling? (I
notice the changelog says apt-get dist-upgrade) but there's no details.
It means I got the latest Debian unstable packages...
Thanks for your hard work.
Hello Everyone,
KnoppMyth
Graham Dunn wrote:
On Tue, Apr 26, 2005 at 10:21:47AM -0700, Cecil Watson wrote:
Jonathan Markevich wrote:
Very exciting!
Can this be dist-upgraded to, or is it another reinstall calling? (I
notice the changelog says apt-get dist-upgrade) but there's no details.
It means I got
Howdy
atrick
Thanks for the tip. However I just tried with KnoppMyth and it's not
there.
Drew
Perhaps knoppmyth testcd?
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
David Shay wrote:
Create a new/second zap2it account.
No, create two additional lineups.
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Hello Everyone,
KnoppMyth R5A18 is now available for download!
http://mysettopbox.tv
http://mysettopbox.tv/CHANGELOG.txt
http://mysettopbox.tv/phpBB2/viewtopic.php?t=4273
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
I guess I had 8 on the brain. I meant R5A15.
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Mark Knecht wrote:
Hi,
Newbie question #2. What is X-Video? How do I get it turned on?
Google is your friend. In short, your video adapter (chipset), must
support Xv (hint, hint. What video card do you have?).
Regards,
Cecil
___
mythtv-users
Michael Carland wrote:
On Apr 19, 2005, at 6:11 PM, Cecil Watson wrote:
Hello,
Michael Carland wrote:
Howdy.
** Questions
Could someone with a working M10K using built in video and ethernet,
with a separate backend, provide me with the following info?
What interrupts are your ethernet and video
Hello,
Michael Carland wrote:
Howdy.
** Questions
Could someone with a working M10K using built in video and ethernet,
with a separate backend, provide me with the following info?
What interrupts are your ethernet and video on? (cat /proc/interrupts)
CPU0
15:1856705
Hello,
Eugene wrote:
Hi all,
I'm trying to install mythtv plugins (mythvideo, mythdvd, mythusic,
etc.) They compile and install fine, but they don't show up in the
menu when I restart mythfrontend. wtf? First time I see this. help!
thanks,
Eugene
Perhaps you specified different prefix for the
Hello,
VJ wrote:
Hi,
I want to change the mentioned flags for compiling latest 0.18
version of MythTV. How can I do that?
Thanks and Regards from
VJ
./configure --help
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
Hello,
Dave Ansell wrote:
Sorry, this is probably simple, but I am still confused after
searching the archives and the Howto seems to be virtually empty on
MythVideo.
I have separate front and backends.
Videos stored on the backend.
Path configured (using frontend) in video manager.
But no
Hello,
Torsten Schenkel wrote:
Hi there,
since I will get an lcd-tv with vga and dvi-x input very soon, I start
thinking about abondoning the tv-out of the pvr350 in my epia box in
favour of the integrated cle266 mpeg2 decoder.
I didn't follow all the development closely but it seems the unichrome
Hello,
AFAIK, there is no way you are going to be running on an EPIA without
building a kernel on your own, so having to compile in support for
temp monitoring and speed changes shouldn't be a big addition.
KnoppMyth R5A12. Using the CD as a frontend takes about 50% CPU.
Installing to hard
Hello,
Johan Arens wrote:
Hi guys
Do you know where I could get the debs for 0.16 ?
My backend is currently running 0.16 and I'm customizing a knoppix livecd.
Thanks in advance
Yohan
You can download an older version of KnoppMyth which has 0.16 and is live.
Hello,
Galen wrote:
For the basic equipment, I need a basic but solid PC. I do not have
one that will suffice, nor do I have much equipment that would be used
within one, so I will be purchasing nearly everything. For HDTV, I
think we're talking about a 3 GHz P4 processor. What AMD processor
Hello,
gLaNDix (Jesse Kaufman) wrote:
Just curious as to what distro (and kernel version) everyone is
running... I'm currently on a slack-based system, but would like to
upgrade to k2.6, but haven't been able to get it working correctly in
slackware-current, so i'm stuck at 2.4 ... just
intent wrote:
If a given frontend is watching a channel, or more generally watching TV
(i.e. possibly switching channels), is it possible to let all other
frontends display the same thing? Sort of a passive frontend mode.
Sure, if you have multiple tuners.
Regards,
Cecil
[EMAIL PROTECTED] wrote:
Most of the popular new PVR cards sold for Windows XP MC are based on
Connexant's Blackbird design, which hasn't had drivers for Linux or Myth.
We have been working on these drivers and released an alpha version at
http://plutohome.com. Pluto even has a self-booting
Michael Haan wrote:
Well, I've had software that wasn't very stable on linux, I've had
software that brought linux to a crawl, software that consistently
froze windows and now I've managed to find a package that routinely
freezes linux - Myth. The box is a combo FE/BE and isn't lacking for
Jomama wrote:
Hello,
Time to unlurk.
I have installed Knopmyth 5.a12. And after a few weeks of bother I can
now record TV.
I have not yet been able to get TV out through the PVR 350 working
correctly. The closest I have come is the dd if=/dev/video0
of=/dev/video16 bs=64k command will indeed
Carrison, Stuart wrote:
Is it me, or is bootsplash support missing from KnoppMyth R5?
Anyone point me to a howto if it is? Does it involve re-compiling the Kernel?
If so, should I be scared?
___
mythtv-users mailing list
mythtv-users@mythtv.org
Ryan Kremser wrote:
just wondering what is going to happen with the knoppmyth forums,
hopefully someone has heard if they are being fixed or left for dead
or who knows. Any ideas?
Back online.
Regards,
Cecil
___
mythtv-users mailing list
Matt Johnson wrote:
I'm having trouble seeking when watching any HD content. I can fast forward
at 3x just fine, but as soon as I go to 5x or faster, everything slows down
to a crawl - as if I'm doing slow motion instead of fast forward. It is
also very pixilated and jumpy when it does this, and
Rich Shumaker wrote:
Man. I seem to get spanked for this question everywhere.
So two places I post up this basic question considering Myth just got
IEEE-1394(firewire) support and in both places I get the same negative
response.
MythTV isn't for DV. Go away. Use something else.
I don't think I
Byron Miller wrote:
Its not mentioned on the site, but if you go to the mirrors/downloads
the iso available is R5A12. http;//www.mysettopbox.tv
VERY nice... i'm no longer getting crashes on my frontend after a
quick update from R5A10.
Easiest Myth to get up and running by far IMHO
Thom Paine wrote:
I am considering using a sourced based distro like sourcemage as my
platform for myth, to see if it performs better on a lower end system
running a really streamlined setup.
Is anyone else running something like that? Does it run better or
worse? I realize it will be much more
Mike Guidry wrote:
I just bought a hauppage PVR-401 capture card, and was wondering if it
was supported like the 250/350s are. I'm going to try a MythTV install
on a FC3 box. Has anyone tried one of these yet?
Yes, works fine (I use KnoppMyth, not FC3)! This card has been
supported by bttv
Lonnie Borntreger wrote:
On Tue, 2005-02-22 at 12:00 -0800, Lonnie Borntreger wrote:
What format is best for recording on a backend that has a bt878 card
(uses software encoding) and an older processor? Is RTJpeg less CPU
intensive than, say, MPEG4? Just trying to stretch some old hardware
Chance wrote:
Here is my problem. I just installed .17, I was using knoppmyth
but I switched because I wanted more options.
Options such as? KnoppMyth is meant to be a PVR and only a PVR. If it
is missing an option in that area, I'd like to know.
Regards,
Cecil
PS: If you were using
Thom Paine wrote:
I was wondering if there is a way to play an AVI file, say one that
I've downloaded from bittorrent. I missed watching some episodes of
24, and have downloaded them already, but can I copy them to my
mythbox and watch them from there somehow?
Why the FRELL are you discussing
Thom Paine wrote:
On Tue, 22 Feb 2005 13:36:01 -0800, Cecil Watson [EMAIL PROTECTED] wrote:
Why the FRELL are you discussing files you downloaded from bittorent, on
the MythTV mailing list? MythTV offers no support for bit-torrent
(PERIOD). Some people already think MythTV is ONLY used
Peter wrote:
Hello,
I am interested in any suggestions list members may have for a person who
has never used Linux before (I have used an mfstools version to upgrade my
TiVo). I would be looking for links and/or books on learning Linux (I am
pretty Windows savvy) but probably for the sole
Tomi Makinen wrote:
Hey,
I am going to upgrade to 0.17, but Iam not quite sure what do I n
need to backup,
so I would be able to restore 0.16 if something goes wrong.
I have backed up the database
every myth* from usr/bn and mtd
*myth* from /usr/lib , including mythtv directory
Brad wrote:
HI Guys,
After hours of frustration I need to ask for help.
Using xawtv I can get my Leadtek winfast 2000 xp working with card
type 34, tuner 12, pll 1.
I open mythtv and I only see UHF channels (fuzzy) and no VHF (2,7,9,10)
If I run command dmesg I see that knoppmyth has detected
That's only valid if you think people would search for answers. The fact that
this thread exists shows that they don't.
LOL...
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Dale and I are happy to annouce the available of KnoppMyth R5 Alpha 9 as
a preview release. While it is alpha, it has been quite stable for
ourselves and the alpha testers. But remember it is still alpha. ;)
http://mysettopbox.tv/phpBB2/viewtopic.php?t=3495
Cecil
Lachlan McIntosh wrote:
for those interested the article from the NYT is reprinted in the australian
financial review today.
Frell that article.
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
Ol' Schoola wrote:
Epox 8RDA3+, 2500+ Mobile, 512 of 2700 DDR, GF4 MX 440, Hauppaugge
PVR-350, Air2PC.
My goal today is to rebuild a FE/BE combined unit (to be seperated
shortly down the road) from the ashes of a FC2 box which died a tragic
and horrible death 10 days ago. It was a Soyo Dragon
Bruce Smith wrote:
I'd also like to start from scratch (switch to a different distro),
but my old box is still working fine (0.15/FC1). However I don't want
to lose all my .nuv files and my old recorded history.
I can move my .nuv files over without a problem. For the database, is
anything
Kevin Kuphal wrote:
Robert Denier wrote:
Since you can remaster your own variation of knoppix and presumably
knoppixmyth the answer is certainly yes. Would it be easy? Probably
not.
I made a bootable distribution of gentoo awhile back and it took
quite some time to work out the details.
Jim B wrote:
from the knopp myth faq the answer is that knopp myth has to be
installed on the hard drive.
http://knoppmythwiki.homelinux.org/faq/index.php?action=artikelcat=1id=6artlang=en
JIm
Right, but the CD can be used as a frontend.
Regards,
Cecil
Brian Foddy wrote:
Ok,
I have the firmware loading, I can azap my channels. I've even
re-added the ivtv drivers and they are working. Rebuilt mythtv
from todays cvs, but now in mythtv setup,
setting the card type to DVB shows the error:
Could not get card info for card #0
and Card Type shows
1 - 100 of 124 matches
Mail list logo