On Sat, 22 Oct 2005, Hugo van der Kooij wrote:
I installed a new system with FC4and a Terratec Cinergy 1200 DVB-C.
Getting the card to work was no problem at all. But I have a hard time
combining program details and the channels.
I figured it out by reading the hints in another thread how do
Hi,
I installed a new system with FC4and a Terratec Cinergy 1200 DVB-C.
Getting the card to work was no problem at all. But I have a hard time
combining program details and the channels.
By default the channels are set to EPG but it did not seem to pick up any
of the info I can see on my Samsung
I did another one.
terminal 1:
[EMAIL PROTECTED] mythvideo]$ mkdir -m 0755 /tmp/fifodir_23962/
[EMAIL PROTECTED] mythvideo]$ /bin/nice -n19 mythtranscode --showprogress -p
autodetect -c 5 -s 2005-06-05-22-00-00 -f /tmp/fifodir_23962/
--honorcutlist 21
Waited some seconds and went to terminal
On Sat, 23 Jul 2005, Hugo van der Kooij wrote:
So I suspect mythtranscode to be the problem but would like to determine
it some way by means of inspecting the results of mythtranscode.
I tried without yuvdenoise and it works but the resulting files do not
match my needs.
However I had a short
When I try to run nuvexport to export some programs I get this error:
Where would you like to export the files to? [.]
Enable Myth cutlist? [Yes]
Enable noise reduction (slower, but better results)? [Yes]
Enable deinterlacing? [Yes]
Crop broadcast overscan (2% border)? [Yes]
Audio bitrate? [192]
Just to add to the information.
The output is the stream of MPEG2 as were all the others I managed to do
in the past.
I did the debug thing as advised by the Wiki page. (I read the archives.
;-)
The first 2 steps went without errors:
[EMAIL PROTECTED] mythvideo]$ mkdir -m 0755
Hi,
For those who this list is a bit busy and who are more familiar with
message in the Dutch language I have started a Dutch mailinglist for
MythTV.
See also: http://hvdkooij.xs4all.nl/mailman/listinfo/mythtv
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
Hi,
I could not find this in a websearch.
Is it possible to indicate that a certain channel is only available during
certain hours? My cable company sends out National Geographic for most of
the time but replaces it with Bloomberg from 03:00 to 12:00 during this
time I can not get a NGC
Hi,
Anyone known if DVB-C is a feasable option with MythTV? My cable network
is forcing the change to digital by giving away DVB boxes for handling
costs only to their subscribers and they will drop a number of analog
channels soon after they expect most of the users have been converted.
So I
Hi,
I noticed the 0.17 release is available as package and I went about a bit
and read some pieces of the online document but ran into some dead links.
on http://www.mythtv.org/docs/mythtv-HOWTO-11.html#ss11.4:
http://www.snapstream.com/products/irblaster/sonydss.htm == 404
On Tue, 8 Feb 2005, Mike Frisch wrote:
On Tue, Feb 08, 2005 at 04:09:25PM +0100, Didde Brockman wrote:
Can anyone please explain to me why XVID's etc. won't play (nicely)
through the 350's out? Wouldn't it be possible to use the fb and simply
tell mplayer to play though it? I'm lost ? as
On Sun, 6 Feb 2005, Felix Huttmann wrote:
- remove the broken channel from the list.
( I don't know how to remove channels in the channel editor, so I edit
its number to something 1000 )
If you happen to have mythweb running you can rather easily remove the
channel from the web
yOn Sun, 6 Feb 2005, Robin Smith wrote:
So after months of happy Mything on FC2 2.6.8-1.521, I decided to
update my kernel to FC2 2.6.9-1.11. After fighting with ndiswrapper
(current version doesn't work and I forgot I had to re-install each
time I changed the kernel) and the breaking video
On Sat, 5 Feb 2005, Robert Denier wrote:
Install mplayer
Install mythvideo
Configure it all and your set.
There should be documentation online for doing these things..
Should be is not a good reference point. My good friend google was unable
to help me out on the issue.
Hugo.
--
I
On Fri, 4 Feb 2005, Greg Foster wrote:
Running a PVR-350 here with a PII-400 Mhz Dell. Menus aren't as
snappy as they could be I'm sure, but simoultaneous playback and
recording is fantastic due to the onboard encoding/decoding. As
others have mentioned, the only drawback to this config
On Fri, 4 Feb 2005, M S wrote:
I think we're missing the point here... it's not a
firewall/DNS/Internet issue. Although I can see where a cache of some
sort might have the same sort of symptoms, but this is last on the
list to check. Everything is configured fine in terms of network
On Tue, 1 Feb 2005, Justin Hunt wrote:
I have already signed the version of the letter that is on the
website, however i dont beleive its fair to modify the letter and not
remove the signatures from it. Kind of like changing a contract after
its signed, you just cant do it
Agreed. It would
On Tue, 25 Jan 2005, Gregg wrote:
Okay. I made the change, but /usr/bin/irw still will not work. I
can record using irrecord. It is a hauppauge grey with a black bottom
remote. Using a PVR 250 on 2.6.10-1.737_FC3.
Is it an lircd thing or an FC3 thing? Do I have to create a
On Sat, 29 Jan 2005, Joe Willis wrote:
I am running MythTV .16 using a PVR-350. Commercial flagging was very
accurate for a while, but now is almost random. The areas identified as
commercials often are regular program segments, and actual commercials are
detected infrequently. What could
On Sun, 30 Jan 2005, Gregg wrote:
I was reading an article and it suggested adding
/etc/init.d/mythbackend into rc.local I have done that and I stilll
can not change channels, but when I stop and start mythbackend
manually from su it works. can someone help me with a script that
will log on
Hi,
Is it possible to add subtitles to a recording using the subtitles send on
teletext? A significant number of european channels do send out their
subtitles on page 888.
I have not seen the option so I guess it counts as a feature request.
Hugo.
--
I hate duplicates. Just reply to
Hi,
I managed to add movies to the MythVideo store and add some usefull data
to them. But where must I stick an image to link it to a movie? (cover
images go where?)
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
[EMAIL PROTECTED]
Hi,
I have a major problem getting CD's identified. The syslog is filled with
messages like:
Jan 30 17:17:46 saruman kernel: hdc: command error: status=0x51 { DriveReady
SeekComplete Error }
Jan 30 17:17:46 saruman kernel: hdc: command error: error=0x54
Jan 30 17:17:46 saruman kernel: ide:
On Sun, 30 Jan 2005, Harry Orenstein wrote:
The real question is: if Isaac posts version 0.17 on Friday or Saturday (or
even early on Sunday) how many people will risk the upgrade and take the
chance that they won't be able to record the Super Bowl (and all those new
and innovative
On Fri, 28 Jan 2005, Ellen Spertus wrote:
I just rebuilt my system with Fedora Core 3 according to Jarod's
instructions. I have a PVR-350 card, and, while I can get sound and
video, I cannot change channels. I first noticed this problem when I
ran the following two commands simultaneously:
Hi,
I try to understand and use the recording groups but I could not find a
way to give them a name. I have a recording schedule to record all 'Tom
Jerry' cartoons and I would like to put them into a similar named group
but how do I do that?
I could not find it in the Myth manual nor by
Hi,
I was close to getting a working system with the 2.6.9 kernel. Just X did
not work.
Aftre the upgrades of last week it would not work well anymore so I tried
to get things right with the latest kernel and all. After a clash with
some options in my modprobe.conf file I got it back to working
On Sat, 29 Jan 2005, Paul Bender wrote:
I had the same problem. I ended up doing the following to get it to
work. I doubt that all the steps are needed, but I am not sure which
one(s) actually did the trick for the sound.
Adjusted kernel modules:
(1) cd
On Sat, 29 Jan 2005, j2 wrote:
Pundit-R, Jarods FC2-setup.
Whats the easiest way to get access to whatever temp-sensors that are in
that thing?
apt-get install lm_sensors
cd /usr/share/doc/lm_sensors*
more QUICKSTART
Hugo.
--
I hate duplicates. Just reply to the relevant
On Sat, 29 Jan 2005, Ellen Spertus wrote:
What's in your /etc/modprobe.conf file?
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
Not much, is it?
How about:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
alias msp3400
On Sat, 29 Jan 2005, Chris Pinkham wrote:
I try to understand and use the recording groups but I could not find a
way to give them a name. I have a recording schedule to record all 'Tom
Jerry' cartoons and I would like to put them into a similar named group
but how do I do that?
Couple
On Thu, 27 Jan 2005, Aaron Aguilar wrote:
How does XMLTV grab the program info? I suppose this is via an
internet connection or something? Will I be able to get by doing this
via a dial up connection?
IP is IP I would say. But wether you want to pay the hours per night this
might take is a
On Thu, 27 Jan 2005, Didde Brockman wrote:
Also, I can't get the modprobe saa7127 test_image=1 to even remotely
look good.
I have seen this myself as unloading and loading just the SAA7127 module
made it switch from good-old PAL to NTSC. Had to remove ivtv and the likes
as well to test it by
On Wed, 26 Jan 2005, Will Otte wrote:
I recently had a problem similar to yours. See below for my comments.
Chris Martin wrote:
I've finally managed to pass some video through my PVR 350' s TV out* so the
next step is to try and get X running. For some reason IVTV is not being
run while
Hi,
I am still strugling to get X output on the Frame Buffer to show on the
PVR-350 TV-out.
When I use kernel 2.6.9-1.724 I can run X11 on the VGA output and watch
the Live TV output or recorded programs on the TV via the scart
connector.
However if I try to load the framebuffer module it bites
On Tue, 25 Jan 2005, John Harvey wrote:
Use rc3e of ivtv. It should fix this.
Could Axel given an indication wether or not it will hit the
http://atrpms.net/dist/fc3/ivtv-0.2.x/ pages soon? I could give it a whirl
myself if realy needed But if Axel is going to use it in a build tonight
it would
On Tue, 25 Jan 2005, MadPatrick wrote:
I've tried your setting, but now i don't have tv at all.
All i can see is some snow with image shadows.
How can i remove this ???
Rollback to the backup config before you did this. Rather obvious I would
think. I suggest you try the effects per command
On Tue, 25 Jan 2005, Peter Martens wrote:
Need some help (again). I am using an alternative grabber for the
Netherlands (tv_grab_nl_gert), which is great because it pulls full
data for one week in about 30 seconds! Problem however is that this
grabber has no config-file. This implies it grabs
On Tue, 25 Jan 2005, Peter Martens wrote:
Did you run `mythfilldatabase --manual` just once?
Yep. Are you using tv_grab_nl_gert too? Or native tv_grab_nl?
PS: Any interrest in getting a dutch mythv mailinglist started? Contact me
offlist
There is a dutch forum. www.mythtv.nl (as
On Wed, 26 Jan 2005, Gavin Hurlbut wrote:
OK. Your attitude smells like a cattle farm.
Please do not insult cattle by implying them here. ;-)
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
[EMAIL PROTECTED] http://hvdkooij.xs4all.nl/
On Sun, 23 Jan 2005, Frutillar wrote:
On Sunday 23 January 2005 10:44 pm, Hugo van der Kooij wrote:
On Sun, 23 Jan 2005, Frutillar wrote:
I am using ivtv 0.3.2a along with lirc 0.7.0 and I am not sure if my
modules.conf file is complete.
NOTHING goes into modules.conf if you use
On Mon, 24 Jan 2005, MadPatrick wrote:
ivtvctl -j reg=0x6c,val=0xfe -d /dev/video0
This one i already have, which i needed to remove the green-screen
But i found also this:
ivtvctl -j reg=0x6c,val=0xda -d /dev/video16
Don't know the difference between video0 and video16, but in mythtv setup
On Sat, 22 Jan 2005, Andy Long wrote:
Well, for me at least, I was able to find a (sloppy, but pretty easy)
workaround for it. I've posted to the list and never really got a
response. FYI, I'm running FC3, Kernel 2.6.10-1.741_FC1 using the
mythtv 0.16 (whatever one was avialable via
On Sat, 22 Jan 2005, Josh Burks wrote:
I've been playing with this a little, and found a different workaround:
1. rename /etc/rc5.d/S86mythbackend to S96mythbackend
2. edit /etc/init.d/mythbackend and change the following line:
from
# chkconfig: - 86 14
to
# chkconfig: - 96 04
This
Hi,
The sample .lircrc is rather limited in my experience. Someone willing to
share their copies? I am looking for samples of the new grey and black one
for the PVR-350 but am willing to take others and put them on a website
as well.
I am working on it right now but am not conviced I am doing it
On Sun, 23 Jan 2005, Travis Osterman wrote:
I hope it doesn't come to that. I hope the above helps the
troubleshooting process. Thanks to all for helping me figure this
out.
It would be usefull if you did put in some more verbose answers. An answer
like 'Tried' does not even tell anyone if
On Sun, 23 Jan 2005, Kevin Kuphal wrote:
Hugo van der Kooij wrote:
I am looking for samples of the new grey and black one
for the PVR-350 but am willing to take others and put them on a website
as well.
Jarod has shared his on wilsonet.com. You can find it at
http://wilsonet.com
On Sun, 23 Jan 2005, Jos Hoekstra wrote:
I use this one that I got from Jarod's site and made a couple of changes
to it to use it together with xine for DVD-playback.
Place it in ~mythtv/.mythtv/lircrc and symlink to that from ~mythtv/lircrc.
Another one that is based on different keys from
On Sun, 23 Jan 2005, Julian Cerruti wrote:
The short version of the question would be, how can I
configure two different window managers to run under
the same X server, one on each display of a dual-head
configuration?
One X server: one window manager. If you want to split you need seperate
On Sun, 23 Jan 2005, Frutillar wrote:
I am using ivtv 0.3.2a along with lirc 0.7.0 and I am not sure if my
modules.conf file is complete.
NOTHING goes into modules.conf if you use a 2.6 kernel. You must use
modprobe.conf and make sure you adjust the syntax.
I suggest you peek into Jarod's
On Sun, 23 Jan 2005, Frutillar wrote:
I noticed that everytime I reboot I loose the group settings for /dev/video*
and the rw group permission for /dev/fb1... this is to have X on my pvr-350
TV Out.
What can I do to make sure that on my next reboot I will have these set
correctly? I added
Hi,
I have my system with a PVR-350 doing more and more as I intended it.
I have setup mythtv and run the backend and frontend on this machine. To
the best of my knowledge I have setup the frequenties correctly.
Via mythweb it looks like shown on:
On Sat, 22 Jan 2005, Hugo van der Kooij wrote:
The problem is that both mythtv (Watching Live TV) and the recording
chnage the channels on my PVR-350.
Make that: do NOT change the channels
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
[EMAIL PROTECTED
On Sat, 22 Jan 2005, Andy Long wrote:
Just out of curiousity, what does the OSD say when you try change
channels? Does it say something like 0 minutes?
I have no OSD as I still have trouble getting X to work on the PVR-350. It
is not showing anything beyond the schedule on the VGA screen.
Hi,
While strugling I updated the system again with my PVR-350 with the latest
FC3 kernel and all. And now all of a sudden I have lost my PAL settings.
My /etc/modprobe.conf:
# InfraRed
alias char-major-61 lirc_i2c
# ETHERNET
alias eth0 sis900
# SOUND
alias snd-card-0
Right.
I got mythweb started and try to setup my channels (NL) but how do I match
them agains the list gathered by xmltv?
I tried to change some settings for the language and so and ended up with
an error like:
Warning at /var/www/html/mythweb/settings.php, line 12:
On Thu, 20 Jan 2005, Hugo van der Kooij wrote:
I tried to change some settings for the language and so and ended up with
an error like:
Warning at /var/www/html/mythweb/settings.php, line 12:
main(themes/compact/settings.php): failed to open stream: Onbekend bestand of
map
Are the themes
Hi,
I have used grip on my CD collection and all of them should be on the
freeCDDB server.
However I tried several CD's but mythtv takes a few minutes to do ?
and then returns with an empty list. It did detect the number of tracks on
the CD but it was not able to fetch the right information.
On Thu, 20 Jan 2005, Chris Petersen wrote:
I got mythweb started and try to setup my channels (NL) but how do I match
them agains the list gathered by xmltv?
mythweb grabs all of that from the mythtv database.
There is nothing in there. I ran mythfilldatabase twice. but I got
something
On Thu, 20 Jan 2005, Chris Petersen wrote:
I got mythweb started and try to setup my channels (NL) but how do I match
them agains the list gathered by xmltv?
mythweb grabs all of that from the mythtv database.
I reran mythtvsetup and now it told me to use the --manual option the
first time
On Mon, 17 Jan 2005, Nick Morrott wrote:
It's still there on the site in section 10, but Jarod have done some cool
CSS stuff to hide it by default. Near the top of the page in the Almost
latest news section is a link Show PVR-350 Output Info which will
magically unhide the 350 output and X
On Sun, 16 Jan 2005, Rob Greene wrote:
How does one properly get the source code via apt-get? I've been
pointed towards a patch that I'd like to try against the 0.16 source
code.
Get the Source RPM package by hand and weave in the patch. All packages
can be found on
Hi,
I am still strugling to get X11 to output anything on my PVR-350 tv out.
I tried a suggestion to remove the rhgb option from grub.conf and replae
it with vga=792 which will results in my VGA output to be fb0 and my
PVR-250 would become fb1. Even with an xorg.conf file which I guess would
be
Hi,
I just noticed the duplicate messages syndrome for a number of messages.
And I think I known why it occurs.
My SMTP server at home was rather busy for about an hour processing 50MB+
of lines of data into a MySQL database and at that time may have been
responding just a bit slugish for an
On Sun, 16 Jan 2005, Frutillar wrote:
On Sunday 16 January 2005 08:09 am, Asciimonster wrote:
Frutillar wrote:
Hi!
I was finally able to get all of the necessary components installed and
operational on my MythTV. What I need to do next is to setup the TV-OUT
feature for my pvr-350.
On Sat, 15 Jan 2005, Frank smith wrote:
On downloading 6629 I open a console as root and use:
init 3
This on my system seems to try and reboot the pc.
You seem to have a problem in your machine. If switching to runlevel 3
results in a reboot you need to read the logs and see why it went for
The following suggestions at apt-get dist-upgrade are puzzling to me:
The following packages will be upgraded
apt cups cups-libs glib2 gtk2 hotplug libgpg-error librpm4.3 libxml2
libxml2-devel libxml2-python libxml2_2 lirc-lib lm_sensors mysql mysql-devel
mysql-server rhn-applet rhnlib rpm
Hi,
I installed lircd according to the 2005-01-10 version of Jarod's guide.
I notice there is no /dev/lirc.
One should create a symbolic link called /dev/lirc that points to
/dev/lirc0
Before:
crw--- 1 root root 61, 0 Jan 12 22:25 /dev/lirc0
srw-rw-rw- 1 root root 0 Jan 12 22:07
On Mon, 10 Jan 2005, Paul Kidwell wrote:
After a long, silent, pause I said, You forgot that you could watch TV *on* a
TV, didn't you?
She turned beet red...
Sounds like a WAF of 150%
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
[EMAIL PROTECTED]
On Sun, 9 Jan 2005, Ellen Spertus wrote:
I'd like to upgrade to FC3, per Jarod's instructions
(http://wilsonet.com/mythtv/fcmyth.php#apt). When I enter:
apt-get install kernel=2.6.9-1.724_FC3
I get an error:
Reading Package Lists... Done
Building Dependency Tree... Done
E: Version
On Sat, 8 Jan 2005, George Lopez wrote:
I am having the exact same problem. The mail list is
not very informative on this. I tried to skip and
continue with the install process but got stuck at the
ivtv portion. Now I can't really do anything.
see the steps and output below:
[EMAIL
On Sun, 9 Jan 2005, George Lopez wrote:
Thanks. Can you account for the noob factor and tell
me what I have to put in before
`uname -a` ?
Just type the bleeding command on the prompt and see what you get.
Hugo.
--
I hate duplicates. Just reply to the relevant mailinglist.
On Sun, 9 Jan 2005, Jim Gifford wrote:
I have a question about that myself, When I tried to use the 2.6.9 on
FC2, everything bombed, lockup's and such. I've had a better luck on
2.6.8 then 2.6.9 on FC2, FC3 has a lot of issues. I wish atrpms would
leave the 2.6.8 stuff online. But this is
On Tue, 4 Jan 2005, Axel Thimm wrote:
On Tue, Jan 04, 2005 at 01:40:03AM +0100, Hugo van der Kooij wrote:
I had no luck getting any tuner information for my PVR-350
What tuner type does ivtv/tveeprom detect (see in dmesg)?
Dec 31 10:31:00 saruman kernel: ivtv: START
On Wed, 5 Jan 2005, Axel Thimm wrote:
It looks like tuning is working kernel wise, you are not missing any
bits.
I will add the instructions to my anotated (paper) copy of Jarod's guide.
Not sure if I will have sufficient time this week to proceed. I scratched
the system to install XP to make
Hi,
I have read multiple times through Jarod's guide but must have missed a
vital detail. (It might be missing.)
It seems the PVR-350 need to get some firware loaded to the card but it is
not mentioned explicitly.
I had no luck getting any tuner information for my PVR-350 so I installex
Windows
On Sat, 1 Jan 2005, Dan wolf wrote:
Ok did that, for set|grep I get:
MYKERNEL=2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST
2004 i686 i686 i386 GNU?Linux
_=MYKERNEL
It seems you have a reading or typing problem.
uname -a IS NOT uname -r
[EMAIL PROTECTED] ~]$ MYNAME=`uname -a`
[EMAIL
On Sun, 2 Jan 2005, [UTF-8] Trond Eivind Glomsrød wrote:
Dan wolf wrote:
Ok did that, for set|grep I get:
MYKERNEL=2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST
2004 i686 i686 i386 GNU?Linux
_=MYKERNEL
You're not entering it right. You've assigned the value of MYKERNEL to
_, not
On Sat, 1 Jan 2005, d gleba wrote:
David Bosiljevac wrote:
Alas, along with my backend crashing, the mysterious freezing problem has
come back.
This is getting so frustrating I'm tempted to switch to a Windows based PVR!
(gasp!)
Have you tried knoppmyth? Maybe it will show you a
On Fri, 31 Dec 2004, Dan wolf wrote:
6--When I type apt-get install
kernel-module-nvidia-graphics6629-$MYKERNEL it says E: Couldn't find
package kernel-module-nvidia-graphics6629
You do not have the MYKERNEL variable set. You MUST see the variable
listed if you use the `set` command. No need
On Fri, 31 Dec 2004, Dan wolf wrote:
1--Should I enable at-testing and install medley-package-config?
Maybe (but probably not) and NO.
2--What does On a related note, here's the apt-get line you need to
use if you have kde-redhat enabled to get their packages to install
cleanly Mean? The
On Fri, 31 Dec 2004, Hugo van der Kooij wrote:
I am trying to get at least the tuner of the PVR-350 working on FC3. I am
using xawtv for ages on my main computer so I tried it but it dies on a
segmentation fault.
Just for the curious this is what happens:
[EMAIL PROTECTED] ~]$ xawtv -noxv
Hi,
I tried to play some DVD's as that is the first thing I want my box to
well. But I could very well play 1 DVD (The muppet show) but it failed on
another (LOTR 1). All of them official DVD's.
The error details I have gathered are:
[EMAIL PROTECTED] ~]$ gxine
server: trying to connect to
On Wed, 29 Dec 2004, Jarod Wilson wrote:
Remove yum, then apt-get update, then apt-get install apt, and I believe all
should be well from there out. Not sure why the kickstart is getting removed
without replacing it with apt, that's what the normal behavior is... I'm
working on a bare-metal
Hi,
I have a number of questions I could not find in the documentation. (call
me old fashioned but I would love to see the documentation on paper.)
1. How does one change the mythtvsetup screen so ALL of it is visible? I
lost the lower half so I got about 2 rows of pixels indicating there are
On Thu, 30 Dec 2004, Marc-David Meijer wrote:
I've been playing with Myth since version 0.15, and I recently upgraded to
0.16.
I also found the same problem as you describe under 1. My guess is it's
because I'm using only 800x600. Connected to this is another problem; most
letters are 'cut
Hi,
I can't seem to get my output in PAL for my PVR-350. I tried it according
to the guide form Jarod but despite the ivtvctl commands I still get NTSC
output as I also see from the syslog output:
Dec 30 13:49:24 saruman kernel: saa7127: video encoder driver unloaded
Dec 30 13:49:27 saruman
On Thu, 30 Dec 2004, Clive at Rational wrote:
I'd like to know if anyone has had success using the
apt-get mythsuite packages on an FC3 system? (I
haven't).
Apart from the concept issues I have yet not run into mythtv problems that
were unresolvable.
Getting the PVR-350 working is not a
On Thu, 30 Dec 2004, Hugo van der Kooij wrote:
I can't seem to get my output in PAL for my PVR-350. I tried it according
to the guide form Jarod but despite the ivtvctl commands I still get NTSC
output as I also see from the syslog output:
There is an odd thing. If I put the option
On Thu, 30 Dec 2004, Dan Boger wrote:
On Wed, Dec 29, 2004 at 10:53:56AM -0800, Jarod Wilson wrote:
Take another look at that page. I already added something at the top
yesterday afternoon that says 350 output may be tanked under FC3.
That said, my FC3 Myth box works just fine, I just
On Thu, 30 Dec 2004, John Van Ostrand wrote:
I used the apt-get and had problems with package dependencies. At one
point I had to remove yum. I also had to manually specify python4
installation (got it from atrpms). I went for the new versions of ivtv-
fw-*.bin instead of the all-in-one
Hi,
How much of the packages are ready to go for Red Hat Enterprise Linux 3.0?
I started of with FC3 only because Jarod's guide made it look like a
jiffy.
However I am not that big a fan of the short lifespan of Fedora Core sets.
So I have used TAO linux for a number of installations. This is
On Thu, 30 Dec 2004, David Smith wrote:
The problem most of us are having can be traced back to the 2.6.9
kernels. I believe there were a number of kernel changes related to the
framebuffer that cause issues with the packaged ivtv 0.1.0 and 0.2.0. The
2.6.8-1.521 kernel appears to be the
On Thu, 30 Dec 2004, Eivind wrote:
On Thursday 30 December 2004 14:00, Clive at Rational wrote:
I'd like to know if anyone has had success using the
apt-get mythsuite packages on an FC3 system? (I
haven't).
I did. And it worked out just fine, except for the fact that I have one of
the
On Thu, 30 Dec 2004, John Van Ostrand wrote:
On Thu, 2004-12-30 at 21:10 +0100, Hugo van der Kooij wrote:
The yum package published has 2 issues.
1. It contains a weird Requires: line which breaks dependencies.
2. It requires python 2.4 that is not part of the stable tree (yet) so
On Thu, 30 Dec 2004, [EMAIL PROTECTED] wrote:
Michael Starks wrote:
On Thu, 2004-12-30 at 16:16 +0100, Hugo van der Kooij wrote:
How much of the packages are ready to go for Red Hat Enterprise Linux 3.0?
I started of with FC3 only because Jarod's guide made it look like a
jiffy
On Wed, 29 Dec 2004, Chris Lynch wrote:
Hopefully someone can give me some ideas, as this is driving me crazy. I'm
running FC3 and installed per Jarod's instructions and I've got this nagging
problem. Whenever I transfer files on my local network to/from the box, it
crashes dead in its
Hi,
I try to test the PVR-350 with 'modprobe saa7127 test_image=1' but I get
the output as NTSC according to my syslog:
Dec 29 18:52:37 saruman kernel: saa7127: video encoder driver unloaded
Dec 29 18:52:43 saruman kernel: saa7127: Ignoring new-style parameters in
presence of obsolete ones
Dec
98 matches
Mail list logo