ible? The port is always open.
-Messaggio originale-
Da: Roger Bell_West [mailto:ro...@firedrake.org]
Inviato: venerdì 6 settembre 2013 10:08
A: nagios-users@lists.sourceforge.net
Oggetto: Re: [Nagios-users] R: R: check_udp error message
On Fri, Sep 06, 2013 at 08:19:37AM +0200, Marc
he case of SNMP, I prefer to use
or write scripts that are specific to what I'm polling rather than using a
generic request/response program. For instance, a program like
check_snmp_load.pl could be alot more robust than running "check_snmp -o
.1.3.6.1.4.1.2021.10.1.3.1" alone.
situation.
On port 161 I can use check_snmp (work correctly), but if I use check_udp on
port 161 it does not work at all !
How can be possible ?
Regards
-Messaggio originale-
Da: Andreas Ericsson [mailto:a...@op5.se]
Inviato: martedì 3 settembre 2013 15:54
A: Nagios Users List
Cc: Marco
Marco Borsani
Unix and Monitoring Sysadmin
Business Unit Internet Solutions - Operations
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet S.r.l.
Società con socio unico
Soggetta a direzione e coordinamento di Italiaonline S.r.l
OK - Packet loss = 0%, RTA = 0.12 ms
192.xxx.xxx.4
View Service Details For This Host
UP
23-04-2013 11:07:31
193d 20h 14m 12s
OK
The Status Informartion is OK (due to the check_dummy service configured
on it) , but If you go inside the passive host 192.xxx.xxx.4 you see:
Active Checks:
/smsd.conf file, but it has
not any effects.
regards
Marco Borsani
Unix and Monitoring Sysadmin
Business Unit Internet Solutions - Operations
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet S.r.l.
Società con socio unico
Soggetta a direzione e coordinamento di
Oggetto: Re: [Nagios-users] R: too much memory usage on Nagios server
Nagios.cfg and default is enabled if i recall correctly. Or google, my
friend. Nagios.org also has very thorough documentation.
On Feb 18, 2013 1:58 AM, "Marco Borsani" wrote:
I am sorry, I dont remember If th
, 2013 at 11:04 AM, Marco Borsani wrote:
Hi all
I have too cluster centos , both with Nagios 3.3.1 , both with 4Gb of ram.
Nagios A , has 400 servers and 3300 services configured. Its memory usage
is about 88%
Nagios B , has 300 servers and 1900 services configured. Its memory usage
is
investigate to understand why this big difference (less
checks , more memory usage) ?
Marco Borsani
Unix and Monitoring Sysadmin
Business Unit Internet Solutions - Operations
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e
: <mailto:steve.onot...@broadridge.com> steve.onot...@broadridge.com
The purpose of the universe is to explore the realm of possibility.
Our purpose is to witness it. - S. James Gates Jr.
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Monday, November 19, 2012 10:11 AM
To: NAGIOS
Subject: [
Hi all
Reading for the first time the docs it seems that these 2 options do the
same thing. Is it ?
Is the only difference that the first one disable the notification forever,
while the other only in a particular timeperiod ?
Both do not stop the service checks.
Marco Borsani
Unix
ct to your GSM
modem sending SMS messages to the phone which is switched off, the messages
will be stored by their cell provider and then forwarded to the Blackberry when
it's powered back on.
Steve
On 29 October 2012 09:12, Marco Borsani wrote:
> Hi all !
>
>
>
>
etc.), but this BB behaviour can hang my radiomodem
did you meet same problems in your environments?
regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzion
Hi
I have a distributed configuration between the Nagios secondary server
(server B) and the Nagios main server (server A).
In the server A I configured many passive services that are active in server
B, using the command check_dummy.
I use also freshness_threshold = 300 , so after 5 minut
-users] enable_notifications=0
On 22/10/12 09:28, Marco Borsani wrote:
Hi all
I change the setting of enable_notifications variable from 1 to 0, but
when I restart Nagios, I still receive notifications.
Have I to set also use_retained_program_state variable from 1 to 0 ,
or
Hi all
I change the setting of enable_notifications variable from 1 to 0, but
when I restart Nagios, I still receive notifications.
Have I to set also use_retained_program_state variable from 1 to 0 ,
or what ?
regards
Marco Borsani
Unix and Monitoring Sysadmin
-char at the beginning of the
string)
How can I do this ?
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di Libero S.r.l
script converts the hostname to uppercase and
send the data to Nagios.
Hope it helps
Met vriendelijke groet/with kind regards,
Arnold Hölzel
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: woensdag 12 september 2012 11:20
To: 'Nagios Users List'
Subject: [Nagios-users] R: R:
and sends the data to a submit_trap script
- the submit_trap script converts the hostname to uppercase and
send the data to Nagios.
Hope it helps
Met vriendelijke groet/with kind regards,
Arnold Hölzel
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: woensdag 12
send the exact things I changed right now but
if needed I can look it up tomorrow.
Met vriendelijke groet/with kind regards,
Arnold Hölzel
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: dinsdag 11 september 2012 17:01
To: 'Nagios Users List'
Subject: [Nagios-users] R: configure
Hi Mike
Actually , I have :
- installed snmptt (in daemon mode)
- Configured a generic passive service in nagios
- Run a snmptrap command from a client to test the configuration
Whats happen ?
1) The TRAP has be sent from the client (HOST B)
2)
Hi all
I read many docs, but I still have problem to configure nagios 3.x to
receive the traps.
May someone explain the steps to follow to configure correctly this issue ?
Is it necessary other SW ?
Many thanks
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt
/restart nagios.
Marco
-Messaggio originale-
Da: Andreas Ericsson [mailto:a...@op5.se]
Inviato: mercoledì 8 agosto 2012 15:42
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] strange behavior disabling checks
It happens if you have enabled state retention data and disable
you share the relevant configuration data ?
On 08/08/12 14:16, Marco Borsani wrote:
Hi all
Sometime happen that when I set active_checks_enabled 0 in a service
and reload the configuration, Nagios did not recognize the instruction.
The server still executes the check.
It is very
Hi all
Sometime happen that when I set "active_checks_enabled 0" in a service
and reload the configuration, Nagios did not recognize the instruction.
The server still executes the check.
It is very strange, because I use several Nagios servers since 2003 and it
is the first time for m
More info
.
Same configuration, on a nagios server 1.4.1 , work perfectly
Da: Marco Borsani [mailto:m.bors...@it.net]
Inviato: venerdì 3 agosto 2012 10:34
A: 'Nagios Users List'
Oggetto: [Nagios-users] R: R: R: R: check_memory does not work properly
run check_memory plugin on the command line to get the full menu of
options available to the plugin and post it here.
Regards,
Deborah
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: 02 August 2012 15:28
To: 'Nagios Users List'
Subject: [Nagios-users] R: R: R: check_m
w,u,c,r
notifications_enabled 1
contact_groups CG_admin
}
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Thursday, August 02, 2012 8:48 AM
To: 'Nagios Users List'
Subject: [Nagios-users] R: R: check_memory does not work
running as where you are running the command. The command line is not
always the same as when the server executes.
James
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: 02 August 2012 14:48
To: 'Nagios Users List'
Subject: [Nagios-users] R: R: check_memory does not work prope
The outputs I show you are:
1) given by web gui (not correct)
2) given by line command (correct)
The notification is the same that web gui
-Messaggio originale-
Da: Paul Dubuc [mailto:w...@paul.dubuc.org]
Inviato: giovedì 2 agosto 2012 16:00
A: Nagios Users List
Cc: Marco Borsani
tting its permissions issue.
Cheers,
James
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Thursday, August 02, 2012 9:48 AM
To: 'Nagios Users List'
Subject: [Nagios-users] R: R: check_memory does not work properly
No idea?
Regards
Da: Marco Borsani [mailto:m.bors
No idea?
Regards
Da: Marco Borsani [mailto:m.bors...@it.net]
Inviato: mercoledì 1 agosto 2012 09:19
A: 'Nagios Users List'
Oggetto: [Nagios-users] R: check_memory does not work properly
Commands.cfg
# 'check_local_memory' command definition
define command{
I use in many checks the “%” symbol without problem
Regards
Da: RichTea [mailto:m...@catsnest.co.uk]
Inviato: mercoledì 1 agosto 2012 10:49
A: Nagios Users List
Oggetto: Re: [Nagios-users] R: check_memory does not work properly
On Wed, Aug 1, 2012 at 8:19 AM, Marco Borsani wrote
A: nagios-users@lists.sourceforge.net
Oggetto: Re: [Nagios-users] check_memory does not work properly
Posting your check configuration is really helpful in cases like this. Its
almost impossible to give a good answer without knowing how youve set the
check up.
From: Marco Borsani [mailto:m.bors.
:
..
Command: check_local_memory
State: WARNING
Message:(null)
.
Any idea ?
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con
)
Any idea?
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di Libero S.r.l
idea?
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di Libero S.r.l
Hi all.
I supposed to use "initial_state" parameter to see a particular state
waiting the first output from a passive check, but it is still in pending
state.
How can I solve it ?
Must I use other parameters together it?
I can't use the check_dummy active command because it deletes the
log file, but I dont know how to manage it.
Regards
Marco
Da: Marco Borsani [mailto:m.bors...@it.net]
Inviato: lunedì 7 maggio 2012 12:25
A: 'Nagios Users List'
Oggetto: [Nagios-users] R: accept trap snmp
Any possibility to receive and manage snmp trap without the Nagios
Any possibility to receive and manage snmp trap without the Nagios Snmp Trap
Interface ?
Regards
Marco
Da: Mark Elsen [mailto:mark.el...@gmail.com]
Inviato: giovedì 29 marzo 2012 19:45
A: Nagios Users List
Oggetto: Re: [Nagios-users] accept trap snmp
Hi all
Actually I make many
passive result without obsess over service
Use nrdp or nsca.
Ciao,
Giorgio
Il giorno 19/apr/2012, alle ore 14:44, "Marco Borsani" ha
scritto:
Hi
I need to send few service results from two Nagios servers, but not for all the
services configured on the main server.
When
Hi
I need to send few service results from two Nagios servers, but not for all
the services configured on the main server.
When I sent all the service results I used obsess over service, but now ?
How can I do ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical
Very interesting.
I don't understand french a lot are there the steps to follow for the
optimization ?
Regards
Marco
-Messaggio originale-
Da: Alexandre Bray [mailto:in...@opendoc.net]
Inviato: sabato 7 aprile 2012 18:50
A: Nagios Users List
Oggetto: Re: [Nagios-users] use_large_ins
I am testing it on 3 different nagios systems.
It seems very good regarding latency, nothing change in execution_time.
I wonder if configuring " use_large_installation_tweaks=1" I can find
problems in other part of the monitoring...
Regards
-Messaggio originale-
Da: C. Bensend [mailto:
We don't use NDOutils.
We have two kind of performance problem:
1) day-by-day - some Nagios servers have many services configured that can
be heavy for the HW
2) trouble with main Nagios server - the other Nagios servers that send to
the main the passive results (via nsca) , due to the stop of the
Hi all
Does anyone has configured it ?
Is it really a good way to follow to reduce memory usage ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Hi all
Actually I make many query via snmp to routers, fw, etc.
Is it possible (and how) received trap snmp from Nagios server?
Regards
Marco
--
This SF email is sponsosred by:
Try Windows Azure free for 90 da
network
what
do you think about ?
Are there any parameters inside nagios.cfg that I will be able to increase
the performance if is it necessary ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329
.
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: 23 February 2012 07:30
To: NAGIOS
Subject: [Nagios-users] number of notification per host
Hi all
In a Nagios server 3.2.3 , I have a host that from several days send me many
notifications, but when I open its details page I re
:
Current Notification Number:
323 "
Is it a bug ? Are two different things ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamen
x. 15
minutes to send all alerts)
Hope this is helpful
From: Frank Bulk [mailto:frnk...@iname.com]
Sent: 02 February 2012 02:55
To: NAGIOS
Subject: Re: [Nagios-users] sms notifications
We use the MultiTech MultiModem iSMS works great.
Frank
From: Marco Borsani [mailto:m.bors...@i
How does it work with Nagios ?
Da: Giles Coochey [mailto:gi...@coochey.net]
Inviato: mercoledì 1 febbraio 2012 16:39
A: nagios-users@lists.sourceforge.net
Oggetto: Re: [Nagios-users] sms notifications
Could you use a clickatel gateway over a 3G modem connection?
--
Message sent
Hi all
To send sms notifications, I am using since 2003 a couple of radiomodem,
connected via serial to my server and smstools SW.
Now, I need something "stronger" compared that configuration because for
specific checks I have to send many and many sms at the same time.
What can I use ?
chine.
I'd redownload the Nagios plugins and recompile them on your new
hw/architecture.
On Wed, Jan 18, 2012 at 4:12 PM, Marco Borsani wrote:
Hi all
Nagios server: 1.4.1
Nagios plugins : 1.4.15
SO: Centos 5.7 64bit
I still receive this errors (but check_nt runs on every server):
he MS platforms ?
Did you compile the chdck_nt for the old machine , and just copied across ?
Marco Borsani wrote:
>
> Hi all
>
> Nagios server: 1.4.1
>
> Nagios plugins : 1.4.15
>
> SO: Centos 5.7 64bit
>
> I still receive this errors (but check_nt runs on every server
7fff847a95d0 error 4
check_nt[2476]: segfault at rip 00394a637a04 rsp
7fff4fc15250 error 4
..
Before, with same Nagios releases, but with another hardware (and centos 5.3
32 bit), no erros.
Any idea ?
Marco Borsani
Unix and Monitoring Sysadmin
Hi all
Normally, you have to install nrpe in the clients and then Nagios server
query them at regular interval
Is there the possibility to communicate with the client only when there are
errors ?
Regards
Marco
--
check? Is the ocsp command
executed?
Is anything logged on either of the servers?
Do you have actually access to the remote servers?
Marcel
-Original Message-
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Wednesday, December 14, 2011 11:46 AM
To: 'Andreas Ericsson'; 'Na
Hi all
May you tell with which are you ownership in the Nagios directory and
subdirectory ?
Especially the :
nagios/etc
(and subdir)
nagios/var
(and subdir)
regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
remote to main server and set an
higher timeout (ocsp_timeout=20)
Marco
-Messaggio originale-
Da: Andreas Ericsson [mailto:a...@op5.se]
Inviato: mercoledì 14 dicembre 2011 11:12
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] timing of passive check results
On 12/14/2011
Hi all
I have more than 400 passive service checks in the main Nagios server, but
15 of them are updated only 1 time a day (always at the same time, 5:36 in
the morning).
In the remote servers the checks run every 5 minutes and in the main server
all the passive services have same configuration.
e.
marco
-Messaggio originale-
Da: Andreas Ericsson [mailto:a...@op5.se]
Inviato: luned 12 dicembre 2011 11:34
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] too many lines in archive log
On 12/12/2011 10:35 AM, Marco Borsani wrote:
> Hi all
>
> Probably I made
I'd like to send in the passive checks less frequently, but I did not find
where to configure.
marco
-Messaggio originale-
Da: Andreas Ericsson [mailto:a...@op5.se]
Inviato: lunedì 12 dicembre 2011 11:34
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] too many
:
[1323564137] PASSIVE SERVICE CHECK:
Is it normal ?
What can I check/modify to reduce the logs ?
In this situation it is impossible use the Event Log menu (and my HD will
be full soon L )
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39
Yes, thanks.
I did it few minutes ago !
;-)
-Messaggio originale-
Da: Giorgio Zarrelli [mailto:zarre...@linux.it]
Inviato: venerdì 2 dicembre 2011 10:25
A: Marco Borsani
Cc: Nagios Users List
Oggetto: Re: R: [Nagios-users] nagiosgraf install prereq
perl -MCPAN -e shell
Then at The
Well
perl -MCPAN -e 'install CGI' --> work correctly
perl -MCPAN -e 'install Time::HiRes' --> give me following error message:
Can't locate object method "install" via package "Time" at -e line 1.
Any idea?
Marco
-Messaggio originale-
Da: Giorgio Zarrelli [mailto:zarre...@linux.it]
Inv
I run :
#> yum install perl-rrdtool perl-GD
#> ./install.pl --check-prereq
And receive 2 errors:
--
./install.pl --check-prereq
checking required PERL modules
Carp...1.11
CGI... ***FAIL***
Data::Dumper...2.124
File::Ba
:
Commands -> timeperiods -> ALL templates -> ALL other
Regards
Marco
-Messaggio originale-
Da: Jim Avery [mailto:j...@jimavery.me.uk]
Inviato: lunedì 21 novembre 2011 14:23
A: Nagios Users List
Oggetto: Re: [Nagios-users] importing files inside NagiosQL
On 21 November 2011 1
osts (ten hosts) similar at existing other ,
> that are not anywhere in the original files.
>
> 5) Appear some inactive contacts (twenty services) similar at
> existing
> other , that are not anywhere in the original files.
>
>
>
> Any idea ?
>
> Regards
>
>
hosts (ten hosts) similar at existing other ,
that are not anywhere in the original files.
5) Appear some inactive contacts (twenty services) similar at existing
other , that are not anywhere in the original files.
Any idea ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
oot from nagiosql
Please paste here The nagiosql install screenshot and The result of
use mysql ;
Select user,host,password from user;
Ciao,
Giorgio
Il giorno 17/nov/2011, alle ore 16:45, "Marco Borsani" ha
scritto:
> Nothing happen, I still have same problem.
>
>
Nothing happen, I still have same problem.
Marco
-Messaggio originale-
Da: Giorgio Zarrelli [mailto:zarre...@linux.it]
Inviato: giovedì 17 novembre 2011 14:39
A: Marco Borsani
Cc: 'Giorgio Zarrelli'; 'Nagios Users List'
Oggetto: Re: R: R: [Nagios-users] configuratio
ore 10:08, "Marco Borsani" ha
scritto:
Hi all
I am using following configurations:
Site A: 2 server in cluster – node “1” running nagios 3.3.1 (and NSCA), node
“2” running mysql
Site B: 2 server in cluster – node “1” running nagios 3.3.1 (send info with
send_nsca to site A
NagioSQL and it supports remote configuration.
Ciao,
Giorgio
Il giorno 15/nov/2011, alle ore 10:08, "Marco Borsani" ha
scritto:
Hi all
I am using following configurations:
Site A: 2 server in cluster – node “1” running nagios 3.3.1 (and NSCA), node
“2” running mysql
configuration.
For example, I read that NConf require Nagios Core and Mysql both in the
same server, is it true ?
May you give me any info?
regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet
I tried this, but does not go in the right way
-Messaggio originale-
Da: frank [mailto:ra...@they.org]
Inviato: venerdì 21 ottobre 2011 05:06
A: Nagios Users List
Oggetto: Re: [Nagios-users] Nagios Logout?
You could also try changing your URL manually to:
http://newusername@hostname/n
ers@lists.sourceforge.net
Oggetto: Re: [Nagios-users] nrpe install and start on sunos joyent
What version of Solaris are you running?
From: Marco Borsani [mailto:m.bors...@it.net]
Sent: Tuesday, October 11, 2011 03:37 AM
To: NAGIOS
Subject: [Nagios-users] nrpe install and start on sunos joy
Hello
I have to run NRPE client on several sunos systems, but I don't know a lot
that OS.
I met also many problems during the compiling..solved using the package
precompiled and installed with "pkgin in nrpe."
1)
I have prepared nrpe.xml
2)
I started the service with "svcadm enable
Hi
Have you ever monitor Joyent platforms ?
Regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di
?
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di
--
All of
None use a distributed Nagios environment with a mysql db ?
Marco
Da: Marco Borsani [mailto:m.bors...@it.net]
Inviato: lunedì 27 giugno 2011 14:08
A: NAGIOS
Oggetto: [Nagios-users] how to manage a distributed configuration
Hi all
Here it is what Id like to develop
erver for reporting pruposes. All it's managed on
the core server.
Having tested different distributed Nagios solutions, this is the one I've
preferred.
Cheers,
Simon
Il 27/06/2011 14:07, Marco Borsani ha scritto:
> Hi all
>
> Here it is what Id like to develop.
>
>
Marco
-Messaggio originale-
Da: Assaf Flatto [mailto:nag...@flatto.net]
Inviato: lunedì 27 giugno 2011 14:25
A: Nagios Users List
Oggetto: Re: [Nagios-users] how to manage a distributed configuration
Marco Borsani wrote:
>
> Hi all
>
> Here it is what Id like to develop.
>
&g
Hi all
Here it is what I'd like to develop.
- In three different sites, I will install three Nagios server
- Every server will control his local computers (about 150 clients
each Nagios server) like active hosts/services
- Two of those Nagios server have to repo
inside the script.
Many thanks for your time.
Regards
Marco
-Messaggio originale-
Da: Craig Stewart [mailto:craig.stew...@corp.xplornet.com]
Inviato: mercoledì 15 giugno 2011 14:03
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] R: force event_handler
Slight problem
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users] force event_handler
Marco,
I think what you want is the OCSP or OSHP command (Obsessive Compulsive
Service/Host Processor)
I think event handlers are more for taking corrective action. The example I
saw was to log into a web
Thanks.
I already set OCHP and OCSP , using same command configured in
event_handler.
Regards
Marco
-Messaggio originale-
Da: Craig Stewart [mailto:craig.stew...@corp.xplornet.com]
Inviato: martedì 14 giugno 2011 16:59
A: Nagios Users List
Cc: Marco Borsani
Oggetto: Re: [Nagios-users
Hi all
I need to execute a command every time an host state or a service state
change (to use send_nsca).
I supposed was a normal behaviour, but something is going wrong.
Right now, the command configured in "event_handler" run only when the state
changes from OK to CRITICAL . never from CRIT
Hi all.
I use a simple script to test NSCA/send_nsca and send manually passive
checks from "nagios C" to "nagios S", using four Nagios macros and it works
;-)
Ex.:
#> ./mysend.sh $HOSTNAME$ $SERVICEDESC$ $SERVICESTATUSID$
$SERVICEOUTPUT$
How can I automate the sending of all passive s
ALERT and SERVICE
ALERT messages) .. and this is not usefull ! J
How can I have same behaviour in Nagios 3.2.3 ? Is there any parameter to
set in Nagios.cfg file ?
thanks
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
Hi all
I installed nagios 3.2.3 on a Centos 5.6 linux server.
Sometime, when I open the Host Groups -> Grid page a see following error
in the Service Status Totals:
http://p.sf.net/sfu/ephox-dev2dev___
Nagios-users mailing list
Nagios-users@lis
We can't
-Messaggio originale-
Da: Yueh-Hung Liu [mailto:yuehung@gmail.com]
Inviato: lunedì 23 maggio 2011 12:09
A: Nagios Users List
Oggetto: Re: [Nagios-users] check_nt: segmentation fault
use check_nrpe + nsclient++ instead?
On Mon, May 23, 2011 at 3:39 PM, Marco Borsani
Hi all
I change my HW (Dell PE 2950) and SO (Centos 5.6 - 64bit) , re-compile
Nagios and plugins 1.4.15, everything is working fine, but often a read the
message:
check_nt[25324]: segfault at rip 003aa1837a04 rsp
7fffd309e0a0 error 4
Any idea ?
Regards
Marco
mobile
-Original Message-
From: "Marco Borsani"
Date: Thu, 12 May 2011 08:49:10
To: 'Ennis Ibarra - NMCOURTS.GOV'; 'Nagios Users
List'
Reply-To: Nagios Users List
Subject: [Nagios-us
Original Message -
From: "Marco Borsani"
To: "NAGIOS"
Sent: Wednesday, May 11, 2011 6:12:38 AM
Subject: [Nagios-users] smstools3 with nagios
Hi all
As many people to send sms with Nagios I usually use smstools2 , all is working
fine.
Now I am testing smstools3
an smstools3 ?
regards
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax: +39 02 30130311
cell: +39 329 5953944
ITnet Srl
Società con socio unico
Direzione e Coordinamento di
$NagiosCfg
No lock file found in /usr/local/nagios/var/nagios.lock
#> dmesg
nagios[3629]: segfault at 362837d4 rip 00411365 rsp
362837dc error 6
I installed many servers with this version, never had this problem.
Any idea ?
Marco Borsani
Unix and Monitor
motes Nagios
servers).
1) is there any documentation regarding nagiosQL and DB structure ?
2) does anybody have any esperiences regarding an environment like that I
explained before ?
thanks
Marco Borsani
Unix and Monitoring Sysadmin
Technical Operations Dpt.
tel: +39 010 4310115
fax
S COMMAND FILE NOT FOUND OR NO EXECUTE PERMISSIONS.
Is it normal ?
After that ... I "just" have to understand how nagiosQL and Nagios works
together ...
Regards
Marco
-Messaggio originale-
Da: Giorgio Zarrelli [mailto:zarre...@linux.it]
Inviato: martedì 26 aprile 2011 12:59
A: Marc
be created (but the
file exist and I wrote inside: physical = /var/www/html/nagiosql/)
Must Nagios be up and running or stopped ?
Marco
-Messaggio originale-
Da: Giorgio Zarrelli [mailto:zarre...@linux.it]
Inviato: sabato 23 aprile 2011 12:57
A: Marco Borsani
Cc: Nagios Users List
Ogge
1 - 100 of 240 matches
Mail list logo
