l setup in net-snmp.
Thanks
Priya
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dave Shield
Sent: Wednesday, April 16, 2008 7:21 PM
To: Lakshmipriya Subramanian (CW)
Cc: [email protected]
Subject: Re: SNMP V3 walk failed in Net-SNMP
On 16/04/2008, Lakshmipriya Subramanian (CW) <[EMAIL PROTECTED]> wrote:
> I have attached the "usr" folder that I am using to test the SNMP
> commands.
Errr no, you haven't!
In general, I would suggest that you test with single-request
commands (snmpget/snmpgetnext) rather than snmpwalk.
Da
I have attached the "usr" folder that I am using to test the SNMP
commands.
The commands used are as follows:
D:\>net start "net-snmp agent"
The Net-SNMP Agent service is starting.
The Net-SNMP Agent service was started successfully.
// User with auth and privacy protocol
/* With SSL suppo
[ First - *please* don't mail me privately, without copying
any responses to the mailing list. I don't have the time
or inclination to offer private, unpaid, SNMP consultancy.
Keep discussions to the list, where others can both learn
and offer advice. Thanks. ]
On 15/04
On 15/04/2008, Lakshmipriya Subramanian (CW) <[EMAIL PROTECTED]> wrote:
> The following configuration details were added up in the
> snmpd.conf file
Please re-read the file README.snmpv3 *carefully*.
There are *TWO* config files mentioned there, and they are not the same.
> I in
day, April 15, 2008 4:46 PM
To: Lakshmipriya Subramanian (CW)
Cc: [email protected]; Lalith Rajendran (CW)
Subject: Re: SNMP V3 walk failed in Net-SNMP
On 15/04/2008, Lakshmipriya Subramanian (CW) <[EMAIL PROTECTED]>
wrote:
> SNMPWALK and SNMPGET for v3 MIB objects
On 15/04/2008, Lakshmipriya Subramanian (CW) <[EMAIL PROTECTED]> wrote:
> SNMPWALK and SNMPGET for v3 MIB objects implemented in our firmware is
> failing. The error is coming from NET-SNMP tool. I am thinking it could be a
> configuration problem with NET-SNMP. Can you let me know how to configure
Hi
SNMPWALK and SNMPGET for v3 MIB objects implemented in our firmware is
failing. The error is coming from NET-SNMP tool. I am thinking it could
be a configuration problem with NET-SNMP. Can you let me know how to
configure the snmpd.conf file for V3 users namely 'username with auth
protocol,
