Hi all... I put out a message asking for help on this topic back in March, but
did not get responses. If you're interested in this topic and have questions,
or if you have suggestions at this later stage, please feel free to contact me.
I've been successful at creating a partial
All,
I see that the last uploaded version of the perl module, Net::SNMP, to CPAN was
made in 2007. I take it that CPAN isn't supported anymore.
Is that true? For those of us that have our build processes centered on CPAN,
this makes it difficult with regards to the Net::SNMP package.
So could
I have been trying to find a way to set the value of IF-MIB::ifSpeed.6, which
is a legitimate interface. I can query the interface and get the value, but I
cannot set it. I am setting it only for another program to fetch it later. It
serves no other purpose than a place to hold the
On Thu, 2010-05-13 at 13:01 -0700, Judith Walker wrote:
I have been trying to find a way to set the value of
IF-MIB::ifSpeed.6, which is a legitimate interface. I can query the
interface and get the value, but I cannot set it. I am setting it
only for another program to fetch it later. It
On 13 May 2010 21:01, Judith Walker judith.wal...@jdsu.com wrote:
I have been trying to find a way to set the value of IF-MIB::ifSpeed.6
As Magnus has said, the IP-MIB::ifSpeed object is defined as read-only,
so you cannot use snmpset on it. However, it is possible to configure
the type and
On 14 May 2010 04:46, Edward Peschko e...@yahoo-inc.com wrote:
I see that the last uploaded version of the perl module, Net::SNMP, to CPAN
was made in 2007. I take it that CPAN isn’t supported anymore.
We have no idea. From the project FAQ:
I've got a problem with the Net-SNMP module. Can
On Fri, 14 May 2010 10:19:58 +0530 Prakash wrote:
P Any reference please
No, not really. A sub-agent is just like any other program. Neither AgentX nor
SNMP care about where the data for an object comes from, be it a file, a
calculation, shared memory, etc.
Hello,
I'm using snmptranslate utility for converting MIB files into
textual description specially for TRAPS. But using the snmpTranslate utility
netsnmp version 5.5 it is unable to convert TRAP-TYPE data types. It is
successfully able to convert the NOTIFICATION-TYPE.
Instead
Please let me know the snmptranslate options used by you.
Regards,
Manjit
Rathod, Nitin wrote:
Hello,
I’m using snmptranslate utility for converting MIB files into textual
description specially for TRAPS. But using the snmpTranslate utility
netsnmp version 5.5 it is unable to convert
snmptranslate.exe -M D:\usr\share\snmp\mibs -m ALL -Pu -TBd m
Regards,
Nitin R.
-Original Message-
From: Manjit [mailto:manjit.si...@globaledgesoft.com]
Sent: Monday, May 17, 2010 4:20 PM
To: Rathod, Nitin
Cc: net-snmp-coders@lists.sourceforge.net
Subject: Re: snmpTranslate
Please let
Really waiting back for your reply.
Regards,
Nitin R.
-Original Message-
From: Manjit [mailto:manjit.si...@globaledgesoft.com]
Sent: Monday, May 17, 2010 4:20 PM
To: Rathod, Nitin
Cc: net-snmp-coders@lists.sourceforge.net
Subject: Re: snmpTranslate
Please let me know the
On 17 May 2010 11:48, Rathod, Nitin nitin_rat...@bmc.com wrote:
I’m using snmptranslate utility for converting MIB files
into textual description specially for TRAPS. But using the snmpTranslate
utility netsnmp version 5.5 it is unable to convert TRAP-TYPE data types. It
is
Tried the patch , and it did worked for TRAP-TYPE, but it is creating entries
as TRAP-TYPE for the parent module of the Traps i.e.
For the MIB below:
MUSE-DEFAULT-NBI
On 4 May 2010 14:00, Ron Bets ron.b...@oracle.com wrote:
Thanks. I am not tied specifically to the 5.4.x stream. My main requirement
is support for
IPv6 transport on Windows, Solaris, and Linux. Would I be better off with a
different release?
I've just put together the latest (hopefully
Hello Duy,
Until now my attempts to reproduce this behavior have been unsuccessful. It
would help if you could explain how the device with IP address 0.0.0.0 has
been created such that I can reproduce your setup.
Bart.
On Fri, May 14, 2010 at 1:16 PM, Duy Doan Khuong dk...@tma.com.vn wrote:
On Sat, 15 May 2010 12:23:49 +0430, majid namnabat maj@gmail.com
said:
mn I think there were conflict between serial signal SIGIO, and
mn agent_check_and_process(0) function. Also I have an important 300 ms
mn timer. Is there there was a conflict between this timer (SIGALRM) and
mn
On Sun, 16 May 2010 12:15:59 +0200, Bart Van Assche bvanass...@acm.org
said:
BVA This revision introduced the following compiler warning:
BVA transports/snmpTLSBaseDomain.c: In function
BVA 'netsnmp_tlsbase_session_init': transports/snmpTLSBaseDomain.c:407:
BVA warning: control reaches end of
On Sat, 15 May 2010 12:10:20 +0200, Thomas Anders
thomas.and...@blue-cable.de said:
TA Especially since these older scripts have been working without Perl
TA before (and still do in the branches).
The scripts still do work without perl. It's just the collection and
summary that requires
On 17 May 2010 13:14, Rathod, Nitin nitin_rat...@bmc.com wrote:
Tried the patch , and it did worked for TRAP-TYPE, but it is creating
entries as TRAP-TYPE for the parent module of the Traps
Yes - that's correct.
It is applying the conversion rules from RFC 3584, to map the SMIv1
TRAP-TYPE
thanks, i will give it a try.
On Fri, May 14, 2010 at 8:36 PM, Wes Hardaker
harda...@users.sourceforge.net wrote:
On Thu, 13 May 2010 13:27:39 -0400, Brad Lira snmp.apa...@gmail.com
said:
BL How can i read the snmpd.conf file when my custom modules loads in
net-snmp?
BL thanks for your
Hi,
I have registered a subagent with net-snmp master agent. When building the
master agent, v3 is set. So now all v1/v2c/v3 SNMP message can be processed
by master agent.
*When the agent is running, how to config the master agent to let it only
accept v1 or v2c GET message??*
Thank you very
Weiwei Zhang wrote:
I have registered a subagent with net-snmp master agent. When building
the master agent, v3 is set. So now all v1/v2c/v3 SNMP message can be
processed by master agent.
*When the agent is running, how to config the master agent to let it
only accept v1 or v2c GET
22 matches
Mail list logo