Getnext Implementation

Hi all, It will be helpful for me if some one provide the following information. 1) What are the options for mib2c to create cache handler for one table. Thanks in advance. Regards, Somenath - Take

Re: problem relating snmpd.conf in View base access control model

On 27/09/06, bhushan [EMAIL PROTECTED] wrote: but when i doing snmpwalk for V3 like (snmpwalk -v 3 -c public localhost -u mynetwork) it throughs an error unknown user name a) If you're using SNMPv3, then you don't need -c public. SNMPv3 does not use communities - it uses usernames

Re: Getnext Implementation

On 27/09/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: 1)What are the options for mib2c to create cache handler for one table. -S cache=1 Dave - Take Surveys. Earn Cash. Influence the Future of IT Join

Re: monitor in solaris

Ravi S M wrote: I found from README.solaris that monitor token does not work, please provide some information if I am correct. The mentioned chapter in README.solaris has not yet been updated for the disman/event mib mobule rewrite (in net-snmp 5.3.x and later) which is expected to work *fine*

Re: monitor in solaris

On 27/09/06, Ravi S M [EMAIL PROTECTED] wrote: I found from README.solaris that monitor token does not work I believe that comment was written w.r.t. release 5.2. The DisMan handling has been completely re-written for 5.3 and above, so ought to work properly on Solaris. Suck it and See. Dave

RE: Monitoring CPU Temp

Hi Dave, Thanks for your answer. Now I am able to get traps for CPU temperature and Voltage levels monitoring. But if I issue snmpwalk on lmFanSensorsTable object I am getting an error msg as below. .1.3.6.1.4.1.2021.13.16.3 = No Such Object available on this agent at this OID. For Other

Re: net-snmp compilation

On 07/09/06, Vlad Shafransky [EMAIL PROTECTED] wrote: I'm writing some agent application on RHL and using net-snmp-5.3.0.1-1.EL.4. I'm using table witch means that I need handlers etc. I need only snmp table managing and basic operations of snmp (like send trap and receive get command). I

Re: help by building a mib module (the second)

On 08/09/06, Timm Brück [EMAIL PROTECTED] wrote: Trying to walk the NET-SNMP-MIB::nsModuleTable: snmpget -m ALL -c public localhost NET-SNMP-MIB::nsModuleTable My apologies. That should actually have been NET-SNMP-AGENT-MIB::nsModuleTable led to the output: Cannot find module

Re: some problems in get_next

On 07/09/06, Jordan [EMAIL PROTECTED] wrote: I suffered from a problem. As I put the Select Instance button in the MIB browser, it will do nothing. Which MIB browser are you talking about? This doesn't sound like our software, so we probably can't help you with that. In the code, the

Re: snmpbulkwalk doesn't finish

On 08/09/06, Stuart Kendrick [EMAIL PROTECTED] wrote: guru% snmpbulkwak -c public foo .iso foo.walk i've found that snmpbulkwalk becomes unhappy when doing this against some devices -- thus far, all Cisco switches -then, snmpbulkwalk reaches some portion of the MIB (close to the same

Re: Upgrading SNMP

On 08/09/06, Sandeep Narasimha Murthy [EMAIL PROTECTED] wrote: All the servers are responding fine except 2 webservers in an isolated network. The machines accept SNMP requests from the Cacti server fine however every second request results in a NO RESPONSE as follows: Ummm... Nothing much

Re: Upgrading SNMP

On 27/09/06, Sandeep Narasimha Murthy [EMAIL PROTECTED] wrote: Still the same. Timeout after 10 seconds. Oh well, worth a try. All I can suggest for that is to try running the agent with debugging turned on, send the two requests, and compare the output. Meanwhile, I switched to another

RE: Upgrading SNMP

Still the same. Timeout after 10 seconds. Meanwhile, I switched to another server and from this server snmpget requests are executing fine except some OIDs generate an error: [EMAIL PROTECTED] rra]# snmpget -v 1 -c public wcmws01 .1.3.6.1.4.1.2021.11.52.0 Error in packet Reason: (noSuchName)

RE: Upgrading SNMP

Yes, The OS is the same - SUN Sparc Solaris 5.9 and the version of the snmp is also the same snmp agent version 5.1.1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: quarta-feira, 27 de Setembro de 2006 14:53 To: Sandeep Narasimha

Re: Need Help In SNMP Trap handler

On 12/09/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I am new to the Net-SNMP. I want to read the traps from the agent in the Linux. I had installed the Net-SNMP Library. But I am not able to configure the Snmptrapd.conf file. In configuration how I can add parameters under Access Control

Re: Problems with monitoring processes on Solaris 9

On 18/09/06, James Mckenzie [EMAIL PROTECTED] wrote: I have problems when I attempt to monitor processes using the instructions and have added the snmp.conf and snmp.log files here. You're missing the agentSecName (and accompanying createUser/rouser) directives. The agent needs an internal

Re: dsktable monitoring

On 22/09/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: We are monitoring dsktable usage using Net-SNMP Agent - 5.3.1 We have added the following entries to the SNMP conf file: snmpd.conf disk / 25% monitor -u test1-r 600 -o dskPath -o dskErrorMsg dskTable dskErrorFlag != 0 So if the free

Re: Agent confusion.

I am just a little ahead of you... Go to: http://www.net-snmp.org/tutorial/tutorial-5/toolkit/index.html I am finishing up the tutorial now and it is very helpful. John Anderson wrote: Greetings, I’m writing an SNMP agent for some MySQL statistics. After reading the tutorials and looking

RE: Need Help In SNMP Trap handler

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: Wednesday, September 27, 2006 7:18 PM To: Jitendra Sanghani (WT01 - Embedded Systems) Cc: net-snmp-users@lists.sourceforge.net Subject: Re: Need Help In SNMP Trap handler On