Re: [nsbasic-ce] Re: New Model CuWin5500 with CE6.0 having issues with NSBasic 8.02a
Hi Ben, I'm sorry - none of your emails came to our support email address. Our address is : NS BASIC Corporation 71 Hill Crescent Toronto, Canada M1M 1J3 416 264-5999 All of the major couriers deliver here regularly. George Henne NS BASIC Corporation http://www.nsbasic.com Hi George, Thankyou for the offer. I have sent several emails to supp...@nsbasic.com without any replys. All I need is an address, and a choice of courier, and I will send you a unit. Thanks again Ben --- In nsbasic-ce@yahoogroups.com, George Henne g...@... wrote: It sounds like you have done all the right things. Is there any chance you can loan us the device for a day? If so, contact support @ nsbasic.com directly, and we will make the arrangements. George Henne NS BASIC Corporation http://www.nsbasic.com I have purchased the latest CuWin5500, HMI device running Windows Embedded 6.0 http://www.cubloc.com/product/06_02.php I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b Everything seems to install/load OK. No error messages on the NSBasic IDE choose ToolsOptionsInstallerGet Device Info shows Device processor Type 2577: Device Type: SMDK2450 Board Device OEM Info: Samsung Electronics Device Version: 6 I have selected the Platform 2577 - ARMV4/StrongARM/SA1100 Wanted to try running an NSBasic program, the Benchmark.nsb Active sync 4.5 connects, I am able to explore the CuWin5500, No error messages at all when uploading or running a program, but all I get is a Blank light gray screen, X in upper Right corner, a tab created on the bottom with the name of the program, plus the rest of the task bar icons , start button, etc. The unit is not lock up because I can open control panel etc. while the blank screen is being shown. The only screen item in the Benchmark.nsb program is a Message Box, but this does not show on the screen of the CuWin5500. I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version of the device, which has CE5.0 installed. Worked very well. In thinking about this, I concluded that the controls were not being registered. It would seem that Windows CE6.0 does not use regsvrce.exe to register the controls. I tried to run ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComm.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEFile.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSCEPictureBox.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \newObjectsPack1.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBControls.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \SerialCE.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \DialogX.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \vbscript.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBWin32.dll Bye Browsing the files on the CuWin5500, I did not find the file regsvrce.exe So I am at a bit of a loss, NSBasic 8.02a should not require an installed runtime on the device, and should have the ability to register any controls Any assistance is appreciated Ben Yahoo! Groups Links Yahoo! Groups Links -- You received this message because you are subscribed to the Google Groups nsb-ce group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
[nsbasic-ce] Re: New Model CuWin5500 with CE6.0 having issues with NSBasic 8.02a
Do not know why the Emails were not recived, no indication of undeliverable, but I will courier a CuWin5500 to you office on Tuesday, October 12th. Thanks for your efforts Ben --- In nsbasic-ce@yahoogroups.com, George Henne g...@... wrote: Hi Ben, I'm sorry - none of your emails came to our support email address. Our address is : NS BASIC Corporation 71 Hill Crescent Toronto, Canada M1M 1J3 416 264-5999 All of the major couriers deliver here regularly. George Henne NS BASIC Corporation http://www.nsbasic.com Hi George, Thankyou for the offer. I have sent several emails to supp...@... without any replys. All I need is an address, and a choice of courier, and I will send you a unit. Thanks again Ben --- In nsbasic-ce@yahoogroups.com, George Henne gh@ wrote: It sounds like you have done all the right things. Is there any chance you can loan us the device for a day? If so, contact support @ nsbasic.com directly, and we will make the arrangements. George Henne NS BASIC Corporation http://www.nsbasic.com I have purchased the latest CuWin5500, HMI device running Windows Embedded 6.0 http://www.cubloc.com/product/06_02.php I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b Everything seems to install/load OK. No error messages on the NSBasic IDE choose ToolsOptionsInstallerGet Device Info shows Device processor Type 2577: Device Type: SMDK2450 Board Device OEM Info: Samsung Electronics Device Version: 6 I have selected the Platform 2577 - ARMV4/StrongARM/SA1100 Wanted to try running an NSBasic program, the Benchmark.nsb Active sync 4.5 connects, I am able to explore the CuWin5500, No error messages at all when uploading or running a program, but all I get is a Blank light gray screen, X in upper Right corner, a tab created on the bottom with the name of the program, plus the rest of the task bar icons , start button, etc. The unit is not lock up because I can open control panel etc. while the blank screen is being shown. The only screen item in the Benchmark.nsb program is a Message Box, but this does not show on the screen of the CuWin5500. I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version of the device, which has CE5.0 installed. Worked very well. In thinking about this, I concluded that the controls were not being registered. It would seem that Windows CE6.0 does not use regsvrce.exe to register the controls. I tried to run ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComm.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEFile.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSCEPictureBox.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \newObjectsPack1.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBControls.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \SerialCE.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \DialogX.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \vbscript.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBWin32.dll Bye Browsing the files on the CuWin5500, I did not find the file regsvrce.exe So I am at a bit of a loss, NSBasic 8.02a should not require an installed runtime on the device, and should have the ability to register any controls Any assistance is appreciated Ben Yahoo! Groups Links Yahoo! Groups Links -- You received this message because you are subscribed to the Google Groups nsb-ce group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
Re: [nsbasic-ce] Re: New Model CuWin5500 with CE6.0 having issues with NSBasic 8.02a
Thank you! George Henne NS BASIC Corporation http://www.nsbasic.com Do not know why the Emails were not recived, no indication of undeliverable, but I will courier a CuWin5500 to you office on Tuesday, October 12th. Thanks for your efforts Ben --- In nsbasic-ce@yahoogroups.com, George Henne g...@... wrote: Hi Ben, I'm sorry - none of your emails came to our support email address. Our address is : NS BASIC Corporation 71 Hill Crescent Toronto, Canada M1M 1J3 416 264-5999 All of the major couriers deliver here regularly. George Henne NS BASIC Corporation http://www.nsbasic.com Hi George, Thankyou for the offer. I have sent several emails to supp...@... without any replys. All I need is an address, and a choice of courier, and I will send you a unit. Thanks again Ben --- In nsbasic-ce@yahoogroups.com, George Henne gh@ wrote: It sounds like you have done all the right things. Is there any chance you can loan us the device for a day? If so, contact support @ nsbasic.com directly, and we will make the arrangements. George Henne NS BASIC Corporation http://www.nsbasic.com I have purchased the latest CuWin5500, HMI device running Windows Embedded 6.0 http://www.cubloc.com/product/06_02.php I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b Everything seems to install/load OK. No error messages on the NSBasic IDE choose ToolsOptionsInstallerGet Device Info shows Device processor Type 2577: Device Type: SMDK2450 Board Device OEM Info: Samsung Electronics Device Version: 6 I have selected the Platform 2577 - ARMV4/StrongARM/SA1100 Wanted to try running an NSBasic program, the Benchmark.nsb Active sync 4.5 connects, I am able to explore the CuWin5500, No error messages at all when uploading or running a program, but all I get is a Blank light gray screen, X in upper Right corner, a tab created on the bottom with the name of the program, plus the rest of the task bar icons , start button, etc. The unit is not lock up because I can open control panel etc. while the blank screen is being shown. The only screen item in the Benchmark.nsb program is a Message Box, but this does not show on the screen of the CuWin5500. I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version of the device, which has CE5.0 installed. Worked very well. In thinking about this, I concluded that the controls were not being registered. It would seem that Windows CE6.0 does not use regsvrce.exe to register the controls. I tried to run ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComm.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEFile.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSCEPictureBox.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \newObjectsPack1.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBControls.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \SerialCE.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \DialogX.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \vbscript.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBWin32.dll Bye Browsing the files on the CuWin5500, I did not find the file regsvrce.exe So I am at a bit of a loss, NSBasic 8.02a should not require an installed runtime on the device, and should have the ability to register any controls Any assistance is appreciated Ben Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links -- You received this message because you are subscribed to the Google Groups nsb-ce group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
[nsbasic-ce] Re: New Model CuWin5500 with CE6.0 having issues with NSBasic 8.02a
Hi George, Thankyou for the offer. I have sent several emails to supp...@nsbasic.com without any replys. All I need is an address, and a choice of courier, and I will send you a unit. Thanks again Ben --- In nsbasic-ce@yahoogroups.com, George Henne g...@... wrote: It sounds like you have done all the right things. Is there any chance you can loan us the device for a day? If so, contact support @ nsbasic.com directly, and we will make the arrangements. George Henne NS BASIC Corporation http://www.nsbasic.com I have purchased the latest CuWin5500, HMI device running Windows Embedded 6.0 http://www.cubloc.com/product/06_02.php I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b Everything seems to install/load OK. No error messages on the NSBasic IDE choose ToolsOptionsInstallerGet Device Info shows Device processor Type 2577: Device Type: SMDK2450 Board Device OEM Info: Samsung Electronics Device Version: 6 I have selected the Platform 2577 - ARMV4/StrongARM/SA1100 Wanted to try running an NSBasic program, the Benchmark.nsb Active sync 4.5 connects, I am able to explore the CuWin5500, No error messages at all when uploading or running a program, but all I get is a Blank light gray screen, X in upper Right corner, a tab created on the bottom with the name of the program, plus the rest of the task bar icons , start button, etc. The unit is not lock up because I can open control panel etc. while the blank screen is being shown. The only screen item in the Benchmark.nsb program is a Message Box, but this does not show on the screen of the CuWin5500. I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version of the device, which has CE5.0 installed. Worked very well. In thinking about this, I concluded that the controls were not being registered. It would seem that Windows CE6.0 does not use regsvrce.exe to register the controls. I tried to run ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComm.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \MSCEFile.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSCEPictureBox.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \newObjectsPack1.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBComDlg.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBControls.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \SerialCE.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \DialogX.ocx ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \vbscript.dll ShellExecute open,regsvrce.exe,\Flash Disk\NSB BASIC\nsbasic \NSBWin32.dll Bye Browsing the files on the CuWin5500, I did not find the file regsvrce.exe So I am at a bit of a loss, NSBasic 8.02a should not require an installed runtime on the device, and should have the ability to register any controls Any assistance is appreciated Ben Yahoo! Groups Links -- You received this message because you are subscribed to the Google Groups nsb-ce group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.