[NTG-context] Letter module broken?

Hello Wolfgang, I've been using your letter module for many years, but I noticed since upgrading to ConTeXt 2024.06.21 23:32 it seems to have stopped working. I tried your sample here: https://wiki.contextgarden.net/Letter#Hraban.E2.80.99s_complicated_logo_and_address_setup When I try to ty

Re: [NTG-context] Letter module not found by LMTX

Hi Lutz and all, mtxrun --generate helped, now it works. I actually don’t know why it worked with MkIV before, since with a MWE both versions behaved the same: didn’t find the module before regenerating the database, and then worked. Sorry for the noise. Hraban > Am 24.02.2021 um 09:32 sch

Re: [NTG-context] Letter module not found by LMTX

Dear Hraban, as far as I know LMTX doesn't provide the modules , so you just need to download the needed modules and put them in the proper directory Le mer. 24 févr. 2021 à 09:36, Lutz Haseloff a écrit : > Hi Hraban, > > works here as expected. > See attached log. > > Greetings Lutz > > Am 24.

Re: [NTG-context] Letter module not found by LMTX

Hi Hraban, works here as expected. See attached log. Greetings Lutz Am 24. Februar 2021 09:16:30 MEZ schrieb Henning Hraban Ramm : >Hi, I just stumbled upon this, no time for further checks ATM: > >\usemodule[letter] >can’t find the installed letter/correspondence module in LMTX mode, >while MkI

[NTG-context] Letter module not found by LMTX

Hi, I just stumbled upon this, no time for further checks ATM: \usemodule[letter] can’t find the installed letter/correspondence module in LMTX mode, while MkIV works flawlessly. Don’t know if other modules are affected. Hraban

Re: [NTG-context] letter: How to customize reference line?

Hi Paul, you have to use the \setupletterlayer command to change the entries in the reference line. \usemodule[letter] \setupletter [name={Joe User}] \setupletterlayer [reference] [list={name,date}] \startletter ... \stopletter If you don’t get a title for your entry you can add it

[NTG-context] letter: How to customize reference line?

Dear ConTeXt folks, I am trying to customize the reference line in a letter. ``` $ context --version mtx-context | ConTeXt Process Management 1.01 mtx-context | mtx-context | main context file: /usr/share/texmf/tex/context/base/mkiv/context.mkiv mtx-context | current version:

Re: [NTG-context] Letter module: Subject below opening

Thanks, Wolfgang. That worked nicely. I have added the information to the Wiki. Best, Parchd. On Sat, Sep 02, 2017 at 01:42:06PM +0200, Wolfgang Schuster wrote: > \usemodule[letter] > > \startletter > [subject={How to change the position of the subject line}, >opening={Hi Parchd,}] > > T

Re: [NTG-context] Letter module: Subject below opening

\usemodule[letter] \startletter [subject={How to change the position of the subject line}, opening={Hi Parchd,}] The elements of the letter environment can be changed with the \tex{setupletterelements} commands, the default order of them is \startitemize[packed] \item title, \item subjec

Re: [NTG-context] Letter module: Subject below opening

On Fri, Sep 01, 2017 at 01:04:44PM +0200, Parchd wrote: > British letters typically have the subject below the opening. > > A stackexchange user asked many moons ago how to accomplish this in > ConTeXt, and received a rather hackish response > (https://tex.stackexchange.com/questions/22438/how-to-

[NTG-context] Letter module: Subject below opening

British letters typically have the subject below the opening. A stackexchange user asked many moons ago how to accomplish this in ConTeXt, and received a rather hackish response (https://tex.stackexchange.com/questions/22438/how-to-place-the-subject-line-under-the-greeting-line-in-t-letter-module-

[NTG-context] Letter module and letterhead

Hello, Is it possible to use the letter module with letterhead? If so, is there an exaple somewhere? Thanks, Roger ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist :

Re: [NTG-context] letter booklet

> On Jan 26, 2015, at 4:04 AM, schuster.wolfg...@gmail.com wrote: > >> Am 25.01.2015 um 23:15 schrieb John Kitzmiller > >: >> >> Desired outcome: a multipage booklet on letter size paper with margins lined >> up when duplex printed and folded. >> >> Using impo

Re: [NTG-context] letter booklet

> Am 25.01.2015 um 23:15 schrieb John Kitzmiller : > > Desired outcome: a multipage booklet on letter size paper with margins lined > up when duplex printed and folded. > > Using imposition with [letter][letter,landscape] did not work, so to start I > used: > > \definepapersize[booklet][width

[NTG-context] letter booklet

Desired outcome: a multipage booklet on letter size paper with margins lined up when duplex printed and folded. Using imposition with [letter][letter,landscape] did not work, so to start I used: \definepapersize[booklet][width=140mm,height=216mm] \setuppapersize[booklet][letter,landscape] \setu

Re: [NTG-context] Letter module

Am 26.06.2014 um 15:55 schrieb Mo Abrahams : > Hello again, > > I managed to get the backaddress looking how I wanted by reading again > through the main ConTeXt manual. I've also got my letterhead loading as > the page background to some degree like so: > > \defineletterelement[layer][letterma

Re: [NTG-context] Letter module

Hello again, I managed to get the backaddress looking how I wanted by reading again through the main ConTeXt manual. I've also got my letterhead loading as the page background to some degree like so: \defineletterelement[layer][lettermain][Stationery]{\externalfigure[letterhead][width=210mm,heigh

[NTG-context] Letter module

Hello, Is there any updated documentation for the letter/correspondence module? All I can find is version 2010.08.27 and I can see from this list that things have changed, I just don't know where to find out what. Also, can anyone tell me how to remove the label above the date, how to add a pdf

Re: [NTG-context] letter-module: the first letter is lost

Am 25.06.2014 um 02:42 schrieb Peter Münster : > Hi, > > With latest context, the "T" is lost: > > \usemodule[letter] > \starttext > \startletter > This is a letter. > \stopletter > \startletter > TThis is a workaround. > \stopletter > \stoptext I put a new version online with fixes this, you

[NTG-context] letter-module: the first letter is lost

Hi, With latest context, the "T" is lost: \usemodule[letter] \starttext \startletter This is a letter. \stopletter \startletter TThis is a workaround. \stopletter \stoptext -- Peter ___ If your question i

Re: [NTG-context] letter module: File ended while scanning use of \buff_gobble

Am 01.09.2013 um 13:33 schrieb Peter Münster : > On Mon, Mar 04 2013, Wolfgang Schuster wrote: > >> \usemodule[letter] >> >> \startsetups[letter:section:content] >> \getbuffer[MyLetter] >> \stopsetups >> >> \setuplettersection[content][alternative=setups] >> >> \def\StartLetter >> {\starttex

Re: [NTG-context] letter module: File ended while scanning use of \buff_gobble

On Mon, Mar 04 2013, Wolfgang Schuster wrote: > \usemodule[letter] > > \startsetups[letter:section:content] > \getbuffer[MyLetter] > \stopsetups > > \setuplettersection[content][alternative=setups] > > \def\StartLetter > {\starttext >\grabbufferdata[MyLetter][StartLetter][StopLetter]} > > \d

Re: [NTG-context] letter module: File ended while scanning use of \buff_gobble

Am 04.03.2013 um 14:57 schrieb Peter Münster : > Hi, > > How could I embed \startletter/\stopletter in a macro please? > > This does not work: > > --8<---cut here---start->8--- > \usemodule[letter] > \def\myStartLetter{\startletter} > \def\myStopLetter{\stop

[NTG-context] letter module: File ended while scanning use of \buff_gobble

Hi, How could I embed \startletter/\stopletter in a macro please? This does not work: --8<---cut here---start->8--- \usemodule[letter] \def\myStartLetter{\startletter} \def\myStopLetter{\stopletter} \myStartLetter \input tufte \myStopLetter --8<---

Re: [NTG-context] letter: errors with foot=gbrief

Am 07.06.2012 um 15:23 schrieb Peter Münster: > Hello, > > This file generates some errors: > > --8<---cut here---start->8--- > \usemodule[letter] > \setupletterlayer[foot][alternative=gbrief] > \startletter[phone=123] > test > \stopletter > --8<-

[NTG-context] letter: errors with foot=gbrief

Hello, This file generates some errors: --8<---cut here---start->8--- \usemodule[letter] \setupletterlayer[foot][alternative=gbrief] \startletter[phone=123] test \stopletter --8<---cut here---end--->8--- Workaround: --8<---

Re: [NTG-context] letter module: error with comment

Am 05.02.2012 um 23:33 schrieb Henning Hraban Ramm: > Hello Wolfgang, > > this was atricky one to track down: > If in my first line after \startletter I’ve a comment containing another > \startletter, I get: This is a normal behavior of buffers in MkIV, you need always a balanced start/stop p

[NTG-context] letter module: error with comment

Hello Wolfgang, this was atricky one to track down: If in my first line after \startletter I’ve a comment containing another \startletter, I get: \stoptext ! File ended while scanning use of \buff_gobble. system > tex > error on line 0 in file : File ended while scanning use of \b

[NTG-context] Letter module: new beta

Hi all, I have a new version of the letter module on my bitbucket site [1], you can download [2] and test it but it requires mkiv and is not completely downward compatible with the current version. Here is a short example to test it: \usemodule[cor-01] % will change %\setupletteroptions % [bod

Re: [NTG-context] letter style error

Am 03.10.2011 um 19:28 schrieb Wolfgang Werners-Lucchini: > Puhh, > > there is more broken. > > With letter style I got > > ! Undefined control sequence. > l.13 \setupletterstyle > [option][backaddress=yes] > > It is always a risk to update context (never change a runnin

Re: [NTG-context] letter style error

On 3-10-2011 19:28, Wolfgang Werners-Lucchini wrote: Puhh, there is more broken. With letter style I got ! Undefined control sequence. l.13 \setupletterstyle [option][backaddress=yes] It is always a risk to update context (never change a running system). are you sure

[NTG-context] letter style error

Puhh, there is more broken. With letter style I got ! Undefined control sequence. l.13 \setupletterstyle [option][backaddress=yes] It is always a risk to update context (never change a running system). :-((( Wolfgang

Re: [NTG-context] Letter module : \enableregime for accents not working within the letter environment

On 20-6-2011 5:31, Wolfgang Schuster wrote: Am 20.06.2011 um 01:43 schrieb Mathieu Dupont: Hi, In the following example, accents between \startletter and \stopletter only are not working. How could this be fixed ? It depends on Hans because it’s a buffer problem: Fixed in next beta (for

Re: [NTG-context] Letter module : \enableregime for accents not working within the letter environment

Am 20.06.2011 um 01:43 schrieb Mathieu Dupont: > Hi, > > In the following example, accents between \startletter and \stopletter only > are not working. > > How could this be fixed ? It depends on Hans because it’s a buffer problem: \enableregime[il1] \starttext \startbuffer Montréal \stopb

[NTG-context] Letter module : \enableregime for accents not working within the letter environment

Hi, In the following example, accents between \startletter and \stopletter only are not working. How could this be fixed ? Thank you in advance ! \usemodule[letter] \enableregime[il1] \setupletterstyle[reference][list=reference]\setupletter[reference=\leftaligned{Montréal}] \setupletter[ from

Re: [NTG-context] Letter module: signature with externalfigure fails

On Sun, Jun 19, 2011 at 1:29 PM, Christian wrote: > Am 19.06.2011 07:48, schrieb luigi scarso: >> >> On Sat, Jun 18, 2011 at 10:34 PM, Christian  wrote: >>> >>> In search of what is going wrong, I discovered that even this simple code >>> fails with context: >>> >>> \starttext >>> \externalfigure[

Re: [NTG-context] Letter module: signature with externalfigure fails

Am 19.06.2011 07:48, schrieb luigi scarso: On Sat, Jun 18, 2011 at 10:34 PM, Christian wrote: In search of what is going wrong, I discovered that even this simple code fails with context: \starttext \externalfigure[cow] \stoptext Did I miss something or is this broken? Btw: Context Minimals o

Re: [NTG-context] Letter module: signature with externalfigure fails

On Sat, Jun 18, 2011 at 10:34 PM, Christian wrote: > In search of what is going wrong, I discovered that even this simple code > fails with context: > > \starttext > \externalfigure[cow] > \stoptext > > Did I miss something or is this broken? > Btw: Context Minimals on Ubuntu 11.04 32bit. > Log-fi

Re: [NTG-context] Letter module: signature with externalfigure fails

In search of what is going wrong, I discovered that even this simple code fails with context: \starttext \externalfigure[cow] \stoptext Did I miss something or is this broken? Btw: Context Minimals on Ubuntu 11.04 32bit. Log-file attached. As always: thanks in advance! (bla.mkiv ConTeXt ver:

[NTG-context] Letter module: signature with externalfigure fails

Hello List, I tried to include a signature (tried pdf, svg, png, shipped pictures) in my letter and it always fails. Example taken from correspondence.pdf Version 2010.08.27: \usemodule[letter] \setupletter[signature={\externalfigure[cow][height=2\lineheight]}] \starttext \startletter Thus, I

Re: [NTG-context] Letter module : pdf not created

Am 18.06.2011 um 14:07 schrieb Mathieu Dupont: > However, I get 3 dashes in the left margin, one about half-way the paper > height, one about 2 inches above it and one about 3 inches below it. > > No matter what I put in the letter, their positions don't change, and they > appear on every page

Re: [NTG-context] Letter module : pdf not created

every pages. Mathieu > From: schuster.wolfg...@googlemail.com > Date: Sat, 18 Jun 2011 06:42:35 +0200 > To: ntg-context@ntg.nl > Subject: Re: [NTG-context] Letter module : pdf not created > > > Am 18.06.2011 um 01:06 schrieb Mojca Miklavec: > > > On Fri, Jun 17,

Re: [NTG-context] Letter module : pdf not created

Am 18.06.2011 um 01:06 schrieb Mojca Miklavec: > On Fri, Jun 17, 2011 at 21:18, Mathieu Dupont wrote: >> >> I just realized I got the following message : >> >> correspondence > your context is too old, you need at last version >> '2009.09.21' > > I tested a bit and it seems that >\doifold

Re: [NTG-context] Letter module : pdf not created

On Fri, Jun 17, 2011 at 21:18, Mathieu Dupont wrote: > > I just realized I got the following message : > > correspondence  > your context is too old, you need at last version > '2009.09.21' I tested a bit and it seems that \doifolderversionelse\contextversion is not too reliable. If I test wit

Re: [NTG-context] Letter module : pdf not created

text@ntg.nl Date: Fri, 17 Jun 2011 14:14:43 -0400 Subject: [NTG-context] Letter module : pdf not created Hi, I work with MkIV (ConTeXt Minimals) on a Mac (64). I just installed the Letter module with : ./first-setup.sh --extras="t-letter" It runs with no error, but no .pdf file

[NTG-context] Letter module : pdf not created

Hi, I work with MkIV (ConTeXt Minimals) on a Mac (64). I just installed the Letter module with : ./first-setup.sh --extras="t-letter" It runs with no error, but no .pdf file is created (in fact, only .log and .tuc are created), even though the .log file says : mkiv lua stats > result saved in

Re: [NTG-context] Letter with letterhead

Hello Willi, Willi Egger writes: > though I am using MKIV only, it should also work with MKII > > \startsetups[letter:foot] > \setlayer[letter:foot] > [x=4.5mm,y=-2mm] > {... whatever must go in here ...} [snip] Many thanks. Yes,

Re: [NTG-context] Letter with letterhead

Hi, though I am using MKIV only, it should also work with MKII \startsetups[letter:foot] \setlayer[letter:foot] [x=4.5mm,y=-2mm] {... whatever must go in here ...} \stopsetups \startsetups[letter:next

[NTG-context] Letter with letterhead

Hello, I must write a multi-page letter with only the first page as (pre-printed) letterhead. I adapted the Letterhead example from the wiki to fit the style of my institution. I would like to know how to revert the second and subsequent pages to use a default layout. If someone know how to use

Re: [NTG-context] letter module, vertical offset of reference line

Am 09.11.2010 um 11:09 schrieb Florian Wobbe: >>> 3) It would be nice to have a bottomframe for the backaddress field that is >>> not longer than then the text itself. >> >> \setupletterstyle >> [reference][frame] >> [width=fit] > > I meant the backaddress frame, though. This works analogously

Re: [NTG-context] letter module, vertical offset of reference line

On Nov 8, 2010, at 20:53 , Wolfgang Schuster wrote: > > Am 31.10.2010 um 11:16 schrieb Florian Wobbe: > >>> Can you make a example where this calculation goes wrong! >> >> Thanks! Of cause, a commented minimal example is attached. >> >> I have two problems and a wish: >> >> 1) The reference l

Re: [NTG-context] letter module, vertical offset of reference line

Am 31.10.2010 um 11:16 schrieb Florian Wobbe: >> Can you make a example where this calculation goes wrong! > > Thanks! Of cause, a commented minimal example is attached. > > I have two problems and a wish: > > 1) The reference line and the following subject line are placed too high. I uploade

Re: [NTG-context] letter module, backaddress placement

> Actually it was not the gap that bothered me. You are right, DIN 676 B says > 45mm. But this seems to be useless as all window envelopes (that I possess) > have their window at 50mm. It defeats the purpose of the backaddress field, > which is hidden by the DIN layout. Shouldn't they be able t

Re: [NTG-context] letter module, vertical offset of reference line

On Oct 31, 2010, at 10:11 , Wolfgang Schuster wrote: > > Am 31.10.2010 um 09:36 schrieb Florian Wobbe: > >> Hi, >> >> I need to adjust the vertical position of the reference line (as well as >> subject, opening etc.) because the info-block is longer than the >> addressee-block to the left. >>

Re: [NTG-context] letter module, vertical offset of reference line

Am 31.10.2010 um 09:36 schrieb Florian Wobbe: > Hi, > > I need to adjust the vertical position of the reference line (as well as > subject, opening etc.) because the info-block is longer than the > addressee-block to the left. > > With alternative=customized I can use > \setupletterstyle [fi

[NTG-context] letter module, vertical offset of reference line

Hi, I need to adjust the vertical position of the reference line (as well as subject, opening etc.) because the info-block is longer than the addressee-block to the left. With alternative=customized I can use \setupletterstyle [firstpage] [topspace=...] However with alternative a and e setti

Re: [NTG-context] letter module, backaddress placement

On Oct 28, 2010, at 21:11 , Wolfgang Schuster wrote: > > Am 28.10.2010 um 19:04 schrieb Florian Wobbe: > >> Dear Wolfgang, >> >> the default vertical placement of the backaddress is to high in dinb.nls. > > The position of the backaddress os correct but i think you don’t like the > large gap

Re: [NTG-context] letter module, backaddress placement

Am 28.10.2010 um 19:04 schrieb Florian Wobbe: > Dear Wolfgang, > > the default vertical placement of the backaddress is to high in dinb.nls. The position of the backaddress os correct but i think you don’t like the large gap between the backaddress and the address. The gap is there because it’

[NTG-context] letter module, backaddress placement

Dear Wolfgang, the default vertical placement of the backaddress is to high in dinb.nls. When I change the offset from \c!voffset=\dimexpr\letterstylevalue{\v!address\v!layer}\c!voffset-\letterstylevalue{\v!backaddress\v!frame}\c!height\relax] to \c!voffset=\dimexpr\letterstylevalue{\v!add

[NTG-context] [letter module][PATCH] default.nli: Small corrections of comments of alternatives for references fields

# HG changeset patch # User Paul Menzel # Date 1283006290 -7200 # Node ID 939ade0cc0c470135c5103fe75603cfbb25e4476 # Parent 10976ddb02cf82c8f9c0f38f2781b88899ba6f25 default.nli: Small corrections of comments of alternatives for references fields. diff -r 10976ddb02cf -r 939ade0cc0c4 files/defau

[NTG-context] [letter module][PATCH] README: Small fixes

# HG changeset patch # User Paul Menzel # Date 1283005270 -7200 # Node ID 10976ddb02cf82c8f9c0f38f2781b88899ba6f25 # Parent 87eb31149c15526932996b88d3ef34c86b6638a0 README: Small fixes. • Use full stops to end sentences and do not enumerate them separate them using commas. • Please note that a

Re: [NTG-context] Letter module and the current beta

Am 23.06.10 13:18, schrieb Andreas Harder: Hi Wolfgang, if I use your letter module the compilations stops with the error "Undefined control sequence. \startmodulecode". My letter module version is from 04.04.10. Has something changed? Yes, \startmodulecode was romved from ConTeXt ;) A

[NTG-context] Letter module and the current beta

Hi Wolfgang, if I use your letter module the compilations stops with the error "Undefined control sequence. \startmodulecode". My letter module version is from 04.04.10. Has something changed? Greeting Andreas

Re: [NTG-context] letter: backaddress

Am 28.03.10 15:39, schrieb Wolfgang Werners-Lucchini: And to define such a own backaddress, one uses \setlettervalue{backaddress}{something} Hopefully this is right! When you want something which can be used for \setupletterstyle[<1>][alternative=<2>] you need \defineletterelement[<1>][<2>

Re: [NTG-context] letter: backaddress

Hallo Wolfgang, > You're mixing different things. > > What is the difference between > > > > \setupletterstyle[option][backaddress=yes] > > > With \setupletterstyle[=yes|no] you can show or hide > elements ok! > > \setupletterstyle[backaddress][alternative=yes] > > > > In 'default.nli'

Re: [NTG-context] letter: backaddress

Am 27.03.10 17:56, schrieb Wolfgang Werners-Lucchini: I do not understand the the main principle. You're mixing different things. What is the difference between \setupletterstyle[option][backaddress=yes] In t-letter.tex you can fint this: \startsetups[\v!letter:\v!layer] \doif\@@@

Re: [NTG-context] letter: backaddress

Hallo, > \setupletterstyle[backaddress=yes] > > it's a disabled by default but i forgot to do this also in the > default style > (most styles reset the layout and use default values before they > modify it) > > \setupletterstyle > >[backaddress] > >[alternative=auto, > > > 'auto' is n

Re: [NTG-context] letter: backaddress

Wolfgang Schuster wrote: > \setupletterstyle[backaddress=yes] Ah, that did it! Thank you. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http

Re: [NTG-context] letter: backaddress

Am 27.03.10 14:51, schrieb Andreas Schneider: Hello, Speaking of the letter module ... I don't get any backaddress at all in the current minimals. Did something change? The example below used to work. \setupletterstyle[backaddress=yes] it's a disabled by default but i forgot to do this als

Re: [NTG-context] letter: backaddress

Hello, Speaking of the letter module ... I don't get any backaddress at all in the current minimals. Did something change? The example below used to work. \usemodule[letter][style=dinb] \setuppapersize[A4][A4] \setupletterstyle [backaddress] [al

Re: [NTG-context] letter-module: reference

Am 26.03.10 22:33, schrieb Wolfgang Werners-Lucchini: 1) How can one position this horizontaly and verticaly? Manual: Section 9.3 and 9.7 This means, that one has to make a customized reference? Since i have no idea what result do you want the answer is yes. 2) How can I def

Re: [NTG-context] letter: backaddress

Am 27.03.10 00:45, schrieb Wolfgang Werners-Lucchini: Hallo, 'backaddress' is composed from 'fromname' and 'fromaddress', but this is to long and must be shortend. How can I overwritte 'backaddress'? \setlettervalue{backaddress}{short address} or \startletter[backaddress=...] ... \stoplet

Re: [NTG-context] letter: backaddress

Dne sobota 27. marca 2010 ob 00:45:19 je Wolfgang Werners-Lucchini napisal(a): > 'backaddress' is composed from 'fromname' and 'fromaddress', > but this is to long and must be shortend. How can I overwritte > 'backaddress'? How about 'sender'? Cheers, Matija -- /\ Document Freedom Day

[NTG-context] letter: backaddress

Hallo, 'backaddress' is composed from 'fromname' and 'fromaddress', but this is to long and must be shortend. How can I overwritte 'backaddress'? Gruß, Wolfgang ___ If your question is of interest to others as well,

Re: [NTG-context] letter-module: reference

Hallo Wolfgang, > > I am trying to make a simple invoice with Wolfgangs letter-module > and > > have some questions: > > > > I have the following reference in mind > > > > \setupletterstyle[reference][ > > alternative=d, > > list={invoice,taxnumber,phone,date}] > > > > 1) How can one posit

Re: [NTG-context] letter-module: reference

Am 26.03.10 20:49, schrieb Wolfgang Werners-Lucchini: Hallo, I am trying to make a simple invoice with Wolfgangs letter-module and have some questions: I have the following reference in mind \setupletterstyle[reference][ alternative=d, list={invoice,taxnumber,phone,date}] 1) H

[NTG-context] letter-module: reference

Hallo, I am trying to make a simple invoice with Wolfgangs letter-module and have some questions: I have the following reference in mind \setupletterstyle[reference][ alternative=d, list={invoice,taxnumber,phone,date}] 1) How can one position this horizontaly and verticaly? 2)

Re: [NTG-context] letter module not working

Hallo Wolfgang, > > I have problems compiling this with > > ConTeXt ver: 2010.03.20 22:59 MKIV > > [...] > > > I can't reproduce this. Can you take a look at the end of the log > for > this information: > > correspondence : t-correspondence.tex: 2010.02.28 > correspondence : t-letter.tex:

Re: [NTG-context] letter module not working

Am 24.03.10 09:55, schrieb Wolfgang Werners-Lucchini: Hallo, I have problems compiling this with ConTeXt ver: 2010.03.20 22:59 MKIV [...] I can't reproduce this. Can you take a look at the end of the log for this information: correspondence : t-correspondence.tex: 2010.02.28 corresponde

[NTG-context] letter module not working

Hallo, I have problems compiling this with ConTeXt ver: 2010.03.20 22:59 MKIV -- % coding: utf-8 \usemodule[letter][style=dina] \mainlanguage[deo] \enableregime[utf-8] \setupletter [fromname={\tfa Wolfgang Werners-Lucchini}, subject={Blub}] \

Re: [NTG-context] Letter Module: backaddress

Hello Wolfgang, thanks again! Greetings, Andreas Am 10.10.2009 um 09:13 schrieb Wolfgang Schuster: Am 09.10.2009 um 10:11 schrieb Andreas Harder: Now one have to care of the width (I think there is no maxwidth- option for frame setups?), so I tried to set the backgroundaddress- st

Re: [NTG-context] letter module: different first page for multiple letters in one file

On Oct 10, 2009, at 3:00 AM, Wolfgang Schuster wrote: Am 10.10.2009 um 01:48 schrieb Michael Green: I have one file containing several letters that I process using Wolfgang's letter module. I have a special background for the first page of a letter. I define and set three layers: PCLogo, PCDe

Re: [NTG-context] letter module: different first page for multiple letters in one file

Am 10.10.2009 um 01:48 schrieb Michael Green: I have one file containing several letters that I process using Wolfgang's letter module. I have a special background for the first page of a letter. I define and set three layers: PCLogo, PCDept, and PCAddress. Here is a representative examp

Re: [NTG-context] Letter Module: backaddress

Am 09.10.2009 um 10:11 schrieb Andreas Harder: Now one have to care of the width (I think there is no maxwidth- option for frame setups?), so I tried to set the backgroundaddress- style to style={\ifdim\framedwidth<85mm \tfx \else \tfxx \fi}. But the problem is, that \framedwidth measures wi

Re: [NTG-context] letter module: different first page for multiple letters in one file

Am 10.10.2009 um 01:48 schrieb Michael Green: I have one file containing several letters that I process using Wolfgang's letter module. I have a special background for the first page of a letter. I define and set three layers: PCLogo, PCDept, and PCAddress. Here is a representative examp

[NTG-context] letter module: different first page for multiple letters in one file

I have one file containing several letters that I process using Wolfgang's letter module. I have a special background for the first page of a letter. I define and set three layers: PCLogo, PCDept, and PCAddress. Here is a representative example: \definelayer [PCLogo] [width=\paperwidth

Re: [NTG-context] Letter Module: backaddress

Am 09.10.2009 um 10:11 schrieb Andreas Harder: When I think about the default setup this would make more sense: \setupletterstyle[backaddress=no] \setupletterstyle[backaddress][alternative=auto] WHat do you think? I think it would be more intuitive that way. I will change this then in the

Re: [NTG-context] Letter Module: backaddress

Am 09.10.2009 um 06:45 schrieb Wolfgang Schuster: When I think about the default setup this would make more sense: \setupletterstyle[backaddress=no] \setupletterstyle[backaddress][alternative=auto] WHat do you think? I think it would be more intuitive that way. One more question: it would

Re: [NTG-context] Letter Module: backaddress

Am 09.10.2009 um 01:24 schrieb Andreas Harder: Hello Wolfgang, thank you for your explanations! When I think about the default setup this would make more sense: \setupletterstyle[backaddress=no] \setupletterstyle[backaddress][alternative=auto] WHat do you think? One more question: it woul

Re: [NTG-context] Letter Module: backaddress

Hello Wolfgang, thank you for your explanations! One more question: it would be nice if the rule under the back-address would have the same length an the back-addres. Is there a convenient way? I tried something with \textbackgrounds (example below) but without success. % from the wiki:

Re: [NTG-context] Letter Module: backaddress

Am 08.10.2009 um 16:01 schrieb Andreas Harder: Hi, now that the foldmarks work … how to set the backaddress? Another thing to document, I already forgot who it works. \setupletterstyle [option] [backaddress=yes] This setting is not necessary because most elements are enable by defaul

[NTG-context] Letter Module: backaddress

Hi, now that the foldmarks work … how to set the backaddress? \usemodule[letter] \setupletterstyle [option] [backaddress=yes] \setupletterstyle [backaddress] [bottomframe=on] \setupletter [fromname={Max Mustermann}, fromaddress={Musterstr. 12\\123456 Musterstadt}] \setupletter

Re: [NTG-context] Letter Module: Foldmarks

On Wed, 7 Oct 2009 23:19:13 +0200 Wolfgang Schuster wrote: > > Fold marks are enabled by default but there was a bug in the code, I > uploaded a new release. > Wow, thank you for that very quick fix! It works fine now. Also thanks for these great explanations and tips; you should really add

Re: [NTG-context] Letter Module: Foldmarks

Am 07.10.2009 um 22:20 schrieb Andreas Schneider: Hi, for some time now, I try to figure out, how to enable fold marks in the letter module. Fold marks are enabled by default but there was a bug in the code, I uploaded a new release. There are different ways to enable and disable all

[NTG-context] Letter Module: Foldmarks

Hi, for some time now, I try to figure out, how to enable fold marks in the letter module. I tried: \setupletterstyle [option] [marking=on, foldmark=yes, cutmark=yes] All three of them didn't seem to do anything. How are fold marks supposed to be set? Or is this currently not possible

[NTG-context] letter module

Hi all, I uploaded a new version of the letter module that deals with the recent changes in the MkIV spacing model, as a result of this you need todays beta (2009.09.21) or later. For MkII users this message is unimportant because the changes don't affect them and older installations can be u

Re: [NTG-context] letter module: Argument of \dodoubletestempty has an extra }

Hi Peter, the message you get is a side effect of the buffer code for mkii, although i have a fix for the context code it won't be applied because unwanted side effects can't be be guaranteed. As you should have noticed your example worked in a older release where i used a different method to st

[NTG-context] letter module: Argument of \dodoubletestempty has an extra }

Hello, Here a minimal test file, to reproduce the problem with latest MKII: % engine=pdftex \usemodule[letter] \starttext \startletter \subject{Test} hello \stopletter \stoptext Cheers, Peter -- Contact information: http://pmrb.free.fr/contact/ ___

[NTG-context] letter module: Missing number, treated as zero.

Hello, Here a minimal test file, to reproduce the problem with latest MKIV: \let\defineblankmethod\definevspacingamount \usemodule[letter] \starttext \startletter Test. \stopletter \stoptext Cheers, Peter -- Contact information: http://pmrb.free.fr/contact/

Re: [NTG-context] letter-module

Andreas Harder wrote: Am 17.09.2009 um 16:03 schrieb Hans Hagen: Andreas Harder wrote: Hi, with the actual beta the compilation of a simple letter stops with: Undefined control sequence. \defineblankmethod[\v!nobreak] {\penalty\plustenthousand} (in default.nli, line 707 \usemodule[letter] \st

  1   2   >