Re: [NTG-context] t-vim failed under windows
Does mtxrun --verbose --noquotes bin:vim -u NONE work correctly on windows? Yes. What about if you run texexec --lua instead of context (with noquote changed to noquotes in t-vim.tex)? Same problem. The log shows: MTXrun | MTXrun | executing: vim -u NONE -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp MTXrun | MTXrun | You can see from above that the argument of vim command -c is not correctly quoted. As mentioned in my last email, the \runvimsyntax generates an incorrect vim command. For example, we expect the line in \runvimsyntax -c \shellescapedquote syntax on\shellescapedquote\space Will be: -c syntax on in the vim command line. However, the log shows it become to: -c syntax on. I think that is one problem cause the failure. I also tried type the command manually: vim -u None -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp It works. File named vimdemo-vimsyntax.tmp-vimsyntax.tmp generated. Next time run texexec will get the correct pdf output. Another found is if tried mtxrun as: mtxrun --verbose --noquotes bin:vim -u None -e -C -n -V10log -c \set tabstop=8\ -c \syntax on\ -c \set syntax=c\ -c \let contextstartline=1\ -c \let contextstopline=0\ -c \source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim\ -c \wqa\ \vimdemo-vimsyntax.tmp\ or mtxrun --verbose --noquotes bin:vim -u None -e -C -n -V10log -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp No vimdemo-vimsyntax.tmp-vimsyntax.tmp generated. The vim log says that it: could not source None It seems the vim may not received the -c source ... and other parameters. So I move the vim command to a batch file: vimcmd.bat with following line, call vim -u None -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim %* then call mtxrun --verbose --noquotes bin:vimcmd -c wqa vimdemo-vimsyntax.tmp or mtxrun --verbose --noquotes bin:vimcmd -c \wqa\ \vimdemo-vimsyntax.tmp\ It works well. I haven't linux/unix machine on hand so I didn't know if this problem is only occurred in windows. Or the mtxrun related? Andy ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
On Fri, 10 Apr 2009, Andy wrote: Does mtxrun --verbose --noquotes bin:vim -u NONE work correctly on windows? Yes. What about if you run texexec --lua instead of context (with noquote changed to noquotes in t-vim.tex)? Same problem. The log shows: MTXrun | MTXrun | executing: vim -u NONE -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp MTXrun | MTXrun | You can see from above that the argument of vim command -c is not correctly quoted. As mentioned in my last email, the \runvimsyntax generates an incorrect vim command. For example, we expect the line in \runvimsyntax The generated command is correct. mtxrun messes up the quotes. -c \shellescapedquote syntax on\shellescapedquote\space Will be: -c syntax on in the vim command line. However, the log shows it become to: -c syntax on. I think that is one problem cause the failure. I also tried type the command manually: vim -u None -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp It works. File named vimdemo-vimsyntax.tmp-vimsyntax.tmp generated. Next time run texexec will get the correct pdf output. Another found is if tried mtxrun as: mtxrun --verbose --noquotes bin:vim -u None -e -C -n -V10log -c \set tabstop=8\ -c \syntax on\ -c \set syntax=c\ -c \let contextstartline=1\ -c \let contextstopline=0\ -c \source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim\ -c \wqa\ \vimdemo-vimsyntax.tmp\ or mtxrun --verbose --noquotes bin:vim -u None -e -C -n -V10log -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp No vimdemo-vimsyntax.tmp-vimsyntax.tmp generated. The vim log says that it: could not source None It should be -u NONE (all capitals) It seems the vim may not received the -c source ... and other parameters. So I move the vim command to a batch file: vimcmd.bat with following line, call vim -u None -e -C -n -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim %* then call mtxrun --verbose --noquotes bin:vimcmd -c wqa vimdemo-vimsyntax.tmp or mtxrun --verbose --noquotes bin:vimcmd -c \wqa\ \vimdemo-vimsyntax.tmp\ It works well. Great. I haven't linux/unix machine on hand so I didn't know if this problem is only occurred in windows. Or the mtxrun related? It is mtxrun related. It works in linux, so it could be windows related. I do not have a windows machine to test (and not enough diskspace to install windows on a VM). As a last resort, what does the log file say for this (all in one line) mtxrun --verbose --noquotes bin:vim -u NONE -e -C -n -V10log -c \set tabstop=8\ -c \syntax on\ -c \set syntax=c\ -c \let contextstartline=1\ -c \let contextstopline=0\ -c \source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim\ -c \wqa\ \vimdemo-vimsyntax.tmp\ If this does not work, does replacing bin:vim with bin:gvim work? Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
It should be -u NONE (all capitals) -u NONE is the same result. It is mtxrun related. It works in linux, so it could be windows related. I do not have a windows machine to test (and not enough diskspace to install windows on a VM). mtxrun seems not execute the vim command line correctly. As a last resort, what does the log file say for this (all in one line) mtxrun --verbose --noquotes bin:vim -u NONE -e -C -n -V10log -c \set tabstop=8\ -c \syntax on\ -c \set syntax=c\ -c \let contextstartline=1\ -c \let contextstopline=0\ -c \source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim\ -c \wqa\ \vimdemo-vimsyntax.tmp\ The log file list as follows: - tabstop=8 [New File] line 0: set --- Options --- helplang=En ttyfast verbose=20 noloadplugins updatecount=0 verbosefile=log iskeyword=@,48-57,_,192-255 line 0: syntax No Syntax items defined for this buffer line 0: set --- Options --- helplang=En ttyfast verbose=20 noloadplugins updatecount=0 verbosefile=log iskeyword=@,48-57,_,192-255 line 0: let b:changedtick #3 v:version #702 v:beval_winnr #0 v:lnum#0 v:scrollstart command line line 0 v:dying #0 v:lang C v:count #0 v:progname vim.exe v:cmdbang #0 v:foldlevel #0 v:ctypeC v:prevcount #0 v:mouse_win #0 v:count1 #0 v:foldstart #0 v:foldend #0 v:profiling #0 v:beval_col #0 v:beval_lnum #0 v:mouse_lnum #0 v:beval_bufnr #0 v:shell_error #0 v:servername VIM v:lc_time English_United States.1252 v:searchforward #1 v:mouse_col #0 v:statusmsgline 0: let line 0: let b:changedtick #3 v:version #702 v:beval_winnr #0 v:lnum#0 v:scrollstart command line line 0 v:dying #0 v:lang C v:count #0 v:progname vim.exe v:cmdbang #0 v:foldlevel #0 v:ctypeC v:prevcount #0 v:mouse_win #0 v:count1 #0 v:foldstart #0 v:foldend #0 v:profiling #0 v:beval_col #0 v:beval_lnum #0 v:mouse_lnum #0 v:beval_bufnr #0 v:shell_error #0 v:servername VIM v:lc_time English_United States.1252 v:searchforward #1 v:mouse_col #0 v:statusmsgline 0: let line 0: source Error detected while processing command line: E471: Argument required line 0: wqa If this does not work, does replacing bin:vim with bin:gvim work? No. Andy ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
On Thu, 9 Apr 2009, Andy Wong wrote:
Hello,
I have tried the example using the vim mode to typeset some c codes. When I
run the sample file, context stop with errors. the sample file and log file
as
list below. I use the windowsXP with the minimal context from ConTeXt garden
and \write18 is enabled. From the log file, it seems the vim command is not
properly quoted as follows:
Another attempt. Does the following test file work for you?
%
%%% Start file
%
\unprotect
\def\shellescapedquote{\letterdoublequote}
\def\runvimsyntax#1
{\executesystemcommand
{mtxrun --verbose bin:vim
-u NONE % No need to read unnessary configurations
-e % run in ex mode
-C % Set compatibile
-n % No swap
-c \shellescapedquote set tabstop=\@@vstab\shellescapedquote\space
-c \shellescapedquote syntax on\shellescapedquote\space
-c \shellescapedquote set syntax=\@@vssyntax\shellescapedquote\space
-c \shellescapedquote let
contextstartline=\@@vsstart\shellescapedquote\space
-c \shellescapedquote let contextstopline=\@@vsstop\shellescapedquote
\space
-c \shellescapedquote source kpse:2context.vim\shellescapedquote\space
-c \shellescapedquote wqa\shellescapedquote\space
\shellescapedquote#1\shellescapedquote}}
\protect
\setupcolors[state=start]
\usemodule[vim]
\definevimtyping [C] [syntax=c]
\starttext
\startC
#include stdio.h
#include stdlib.h
void main()
{
printf(Hello World\n) ;
return;
}
\stopC
\stoptext
%
%%% End file
%
Aditya
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] t-vim failed under windows
It did not work, either. Same problem.
Andy
On Fri, Apr 10, 2009 at 3:13 PM, Aditya Mahajan adit...@umich.edu wrote:
On Thu, 9 Apr 2009, Andy Wong wrote:
Hello,
I have tried the example using the vim mode to typeset some c codes. When
I
run the sample file, context stop with errors. the sample file and log
file
as
list below. I use the windowsXP with the minimal context from ConTeXt
garden
and \write18 is enabled. From the log file, it seems the vim command is
not
properly quoted as follows:
Another attempt. Does the following test file work for you?
%
%%% Start file
%
\unprotect
\def\shellescapedquote{\letterdoublequote}
\def\runvimsyntax#1
{\executesystemcommand
{mtxrun --verbose bin:vim
-u NONE % No need to read unnessary configurations
-e % run in ex mode
-C % Set compatibile
-n % No swap
-c \shellescapedquote set tabstop=\@@vstab\shellescapedquote\space
-c \shellescapedquote syntax on\shellescapedquote\space
-c \shellescapedquote set syntax=\@@vssyntax\shellescapedquote\space
-c \shellescapedquote let
contextstartline=\@@vsstart\shellescapedquote\space
-c \shellescapedquote let contextstopline=\@@vsstop\shellescapedquote
\space
-c \shellescapedquote source
kpse:2context.vim\shellescapedquote\space
-c \shellescapedquote wqa\shellescapedquote\space
\shellescapedquote#1\shellescapedquote}}
\protect
\setupcolors[state=start]
\usemodule[vim]
\definevimtyping [C] [syntax=c]
\starttext
\startC
#include stdio.h
#include stdlib.h
void main()
{
printf(Hello World\n) ;
return;
}
\stopC
\stoptext
%
%%% End file
%
Aditya
___
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] t-vim failed under windows
On Fri, 10 Apr 2009, Andy Wong wrote: It did not work, either. Same problem. Then, for the moment use your workaround of having a batch file. I will try to get access to a windows environment in a few days and then check what is going wrong on windows. Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
Thanks. Andy On Fri, Apr 10, 2009 at 3:28 PM, Aditya Mahajan adit...@umich.edu wrote: On Fri, 10 Apr 2009, Andy Wong wrote: It did not work, either. Same problem. Then, for the moment use your workaround of having a batch file. I will try to get access to a windows environment in a few days and then check what is going wrong on windows. Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
On Thu, 9 Apr 2009, Andy Wong wrote: Hello, I have tried the example using the vim mode to typeset some c codes. When I run the sample file, context stop with errors. the sample file and log file as list below. I use the windowsXP with the minimal context from ConTeXt garden and \write18 is enabled. From the log file, it seems the vim command is not properly quoted as follows: MTXrun | executing: vim -u NONE -e -C -n -V10log -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp I check the t-vim.tex, the definition of the vim command is correct. I don't know why the \shellescapedquote is not properly resolved. Any help? thanks. Does changing noquote to noquotes in line 797 of t-vim help? Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
The same problem. It seems the \shellescapedquote generated to the wrong position. So vim complains the -c parameters is wrong. Andy. On Thu, Apr 9, 2009 at 4:22 PM, Aditya Mahajan adit...@umich.edu wrote: On Thu, 9 Apr 2009, Andy Wong wrote: Hello, I have tried the example using the vim mode to typeset some c codes. When I run the sample file, context stop with errors. the sample file and log file as list below. I use the windowsXP with the minimal context from ConTeXt garden and \write18 is enabled. From the log file, it seems the vim command is not properly quoted as follows: MTXrun | executing: vim -u NONE -e -C -n -V10log -c set tabstop=8 -c syntax on -c set syntax=c -c let contextstartline=1 -c let contextstopline=0 -c source c:/context/tex/texmf-context/tex/context/third/vim/2context.vim -c wqa vimdemo-vimsyntax.tmp I check the t-vim.tex, the definition of the vim command is correct. I don't know why the \shellescapedquote is not properly resolved. Any help? thanks. Does changing noquote to noquotes in line 797 of t-vim help? Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] t-vim failed under windows
On Thu, 9 Apr 2009, Andy Wong wrote: The same problem. It seems the \shellescapedquote generated to the wrong position. So vim complains the -c parameters is wrong. Does mtxrun --verbose --noquotes bin:vim -u NONE work correctly on windows? What about if you run texexec --lua instead of context (with noquote changed to noquotes in t-vim.tex)? Aditya ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
