Re: [OmniOS-discuss] manteinance mode
OK . The BE with errors still with errors . The new BE, after trying to import the pool with missing log device, is working . So, I will change the default BE . Like all others msg with this error in all forums, this problem have no solution . To finish it, someone can direct me to a doc about how to change default BE ? Thanks everyone Fábio Rabelo 2017-08-21 7:44 GMT-03:00 Fábio Rabelo <fa...@fabiorabelo.wiki.br>: > just realised, the pool are health, but the log drive shows missing ! > > Can it be the problem ? > > Wil try to deatach it . > > > And : > >> The only thing I can think of is ... did you refresh the active service >> manifest? >> >> e.g. >> >> svcadm refresh boot-archive:default > > > no effect . > > > Fábio Rabelo > > > > -- Forwarded message -- > From: Hugh McIntyre <li...@mcintyreweb.com> > Date: 2017-08-21 3:20 GMT-03:00 > Subject: Re: [OmniOS-discuss] manteinance mode > To: Fábio Rabelo <fa...@fabiorabelo.wiki.br> > > > Sorry, I can't reliably help beyond this. You should probably post > back to the Illumos or OmniOS lists. > > There are a few on-line search results matching your error, for example: > > https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html > >- From 2012: attempts to increase timeout > (may fix your issue but doubtful) > > https://community.oracle.com/thread/3764402?tstart=0 > >- Suggests you changed some configuration which broke things. >- Maybe broken vfstab, or some other config change > > http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html > > - Similar config change >- This suggests to rebuild the boot archive. But not sure > this is safe unless you understand the error > > Hugh. > > > > > On 8/20/17 6:27 PM, Fábio Rabelo wrote: >> >> I rebooted the system, and now the file has a content . >> >> In the attachment >> >> sorry the jpeg, the system do not allow ssh connection, I cannot cut >> and paste anything . >> >> Fábio Rabelo >> >> 2017-08-20 22:19 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >>> >>> OK, then probably /var/svc/log/system-boot-archive. >>> >>> Essentially, /var/svc/log should contain logs for the services, hopefully >>> including the reason for any errors. The only exception should be early in >>> the boot process if the root FS is not mounted read/write. >>> >>> I'm not sure why you're seeing the error you are seeing unless there is some >>> other console message referring to a hardware timeout before the svc.startd >>> message below? >>> >>> Hugh. >>> >>> >>> >>> >>> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>>> >>>> >>>> thanks for you help >>>> >>>> But, the are no file with that name in the folder . >>>> >>>> files startting with boot are : >>>> >>>> system-boot-archive-update >>>> system-boot-archive >>>> system-boot-config >>>> system-initial-boot >>>> >>>> comand run where : >>>> >>>> ls |grep boot >>>> >>>> >>>> Fábio Rabelo >>>> >>>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >>>>> >>>>> >>>>> What does /var/svc/log/system-boot-archive:default.log say near the end? >>>>> >>>>> Hugh. >>>>> >>>>> >>>>> >>>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>>> >>>>>> >>>>>> >>>>>> hi to all >>>>>> >>>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>>> failure today, and when it boots, I have several msg like this : >>>>>> >>>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>>> exit timed out. killing contract 16. >>>>>> >>>>>> svcadm clear makes any difference ... >>>>>> >>>>>> any help, please !!! >>>>>> >>>>>> >>>>>> Fábio Rabelo >>>>>> ___ >>>>>> OmniOS-discuss mailing list >>>>>> OmniOS-discuss@lists.omniti.com >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>>> >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: manteinance mode
just realised, the pool are health, but the log drive shows missing ! Can it be the problem ? Wil try to deatach it . And : > The only thing I can think of is ... did you refresh the active service > manifest? > > e.g. > > svcadm refresh boot-archive:default no effect . Fábio Rabelo -- Forwarded message -- From: Hugh McIntyre <li...@mcintyreweb.com> Date: 2017-08-21 3:20 GMT-03:00 Subject: Re: [OmniOS-discuss] manteinance mode To: Fábio Rabelo <fa...@fabiorabelo.wiki.br> Sorry, I can't reliably help beyond this. You should probably post back to the Illumos or OmniOS lists. There are a few on-line search results matching your error, for example: https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html - From 2012: attempts to increase timeout (may fix your issue but doubtful) https://community.oracle.com/thread/3764402?tstart=0 - Suggests you changed some configuration which broke things. - Maybe broken vfstab, or some other config change http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html - Similar config change - This suggests to rebuild the boot archive. But not sure this is safe unless you understand the error Hugh. On 8/20/17 6:27 PM, Fábio Rabelo wrote: > > I rebooted the system, and now the file has a content . > > In the attachment > > sorry the jpeg, the system do not allow ssh connection, I cannot cut > and paste anything . > > Fábio Rabelo > > 2017-08-20 22:19 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >> >> OK, then probably /var/svc/log/system-boot-archive. >> >> Essentially, /var/svc/log should contain logs for the services, hopefully >> including the reason for any errors. The only exception should be early in >> the boot process if the root FS is not mounted read/write. >> >> I'm not sure why you're seeing the error you are seeing unless there is some >> other console message referring to a hardware timeout before the svc.startd >> message below? >> >> Hugh. >> >> >> >> >> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>> >>> >>> thanks for you help >>> >>> But, the are no file with that name in the folder . >>> >>> files startting with boot are : >>> >>> system-boot-archive-update >>> system-boot-archive >>> system-boot-config >>> system-initial-boot >>> >>> comand run where : >>> >>> ls |grep boot >>> >>> >>> Fábio Rabelo >>> >>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >>>> >>>> >>>> What does /var/svc/log/system-boot-archive:default.log say near the end? >>>> >>>> Hugh. >>>> >>>> >>>> >>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>> >>>>> >>>>> >>>>> hi to all >>>>> >>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>> failure today, and when it boots, I have several msg like this : >>>>> >>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>> exit timed out. killing contract 16. >>>>> >>>>> svcadm clear makes any difference ... >>>>> >>>>> any help, please !!! >>>>> >>>>> >>>>> Fábio Rabelo >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>> >>>> ___ >>>> OmniOS-discuss mailing list >>>> OmniOS-discuss@lists.omniti.com >>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: manteinance mode
sorry, just realise, msg are not beeing forward to forum Fábio Rabelo -- Forwarded message -- From: Fábio Rabelo <fa...@fabiorabelo.wiki.br> Date: 2017-08-21 7:06 GMT-03:00 Subject: Re: [OmniOS-discuss] manteinance mode To: Hugh McIntyre <li...@mcintyreweb.com> Hi The first link I did not have found, will try . Links 2 and 3 allready tryed, no change . The thing is : nobody changed anything ! history : Electric company warns abou aoutage sunday moring system is shut down late saturday, no msg, no errors, nothing, power off with any event Sunday, late afternoon , system power up . errors ... There are another Solaris system in the same site, same instalation timeframe, no errors .. To sum to history, I created a new BE, tryed to import the pool, msg "no available pool to import" . In maitenance mode, it show pool mounted and health . Complete lost here Will try to change boot disk, install evething from scracth, and try impor pool again Fábio Rabelo 2017-08-21 3:20 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: > Sorry, I can't reliably help beyond this. You should probably post back to > the Illumos or OmniOS lists. > > There are a few on-line search results matching your error, for example: > > https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html > >- From 2012: attempts to increase timeout > (may fix your issue but doubtful) > > https://community.oracle.com/thread/3764402?tstart=0 > >- Suggests you changed some configuration which broke things. >- Maybe broken vfstab, or some other config change > > http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html > >- Similar config change >- This suggests to rebuild the boot archive. But not sure > this is safe unless you understand the error > > Hugh. > > > > > On 8/20/17 6:27 PM, Fábio Rabelo wrote: >> >> I rebooted the system, and now the file has a content . >> >> In the attachment >> >> sorry the jpeg, the system do not allow ssh connection, I cannot cut >> and paste anything . >> >> Fábio Rabelo >> >> 2017-08-20 22:19 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >>> >>> OK, then probably /var/svc/log/system-boot-archive. >>> >>> Essentially, /var/svc/log should contain logs for the services, hopefully >>> including the reason for any errors. The only exception should be early >>> in >>> the boot process if the root FS is not mounted read/write. >>> >>> I'm not sure why you're seeing the error you are seeing unless there is >>> some >>> other console message referring to a hardware timeout before the >>> svc.startd >>> message below? >>> >>> Hugh. >>> >>> >>> >>> >>> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>>> >>>> >>>> thanks for you help >>>> >>>> But, the are no file with that name in the folder . >>>> >>>> files startting with boot are : >>>> >>>> system-boot-archive-update >>>> system-boot-archive >>>> system-boot-config >>>> system-initial-boot >>>> >>>> comand run where : >>>> >>>> ls |grep boot >>>> >>>> >>>> Fábio Rabelo >>>> >>>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre <li...@mcintyreweb.com>: >>>>> >>>>> >>>>> What does /var/svc/log/system-boot-archive:default.log say near the >>>>> end? >>>>> >>>>> Hugh. >>>>> >>>>> >>>>> >>>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>>> >>>>>> >>>>>> >>>>>> hi to all >>>>>> >>>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>>> failure today, and when it boots, I have several msg like this : >>>>>> >>>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>>> exit timed out. killing contract 16. >>>>>> >>>>>> svcadm clear makes any difference ... >>>>>> >>>>>> any help, please !!! >>>>>> >>>>>> >>>>>> Fábio Rabelo >>>>>> ___ >>>>>> OmniOS-discuss mailing list >>>>>> OmniOS-discuss@lists.omniti.com >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>>> >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] manteinance mode
hi to all A system, with 3 years on line, no issue at all, passed to a power failure today, and when it boots, I have several msg like this : svc.startd[10] : svc:/system/boot-archive:default: method or service exit timed out. killing contract 16. svcadm clear makes any difference ... any help, please !!! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] new boot environment
Hi to all There are a way to force the creation of a new boot environment ? Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Bloody update for May 8th (r151022-RC0 feeder)
WOW Great news !!! Solar Flare 10G network cards are fully supported now :?!? Fábio Rabelo 2017-05-08 16:34 GMT-03:00 Dan McDonald <dan...@omniti.com>: > I've updated bloody, and install media, today. > > illumos-omnios is at d2ed2f2489, omnios-build is at b902717c6dc, both master > branches. > > A few merges from upstream illumos, a few small LX fixes from Joyent, and a > bump of Mozilla-NSS to 3.30.2. > > This master branch has been merged into r151022 branches, and will provide > the basis for the last batch of install and upgrade tests. Users who are > looking for insights into r151022 should go check the in-progress release > notes: > > http://omnios.omniti.com/wiki.php/ReleaseNotes/r151022 > > There are new, r151022-related, pages you can visit from the above. The > UPGRADE INSTRUCTIONS should be read carefully, ESPECIALLY by r151014 users, > and by anyone with "ipkg" (non-linked-image, native) zones. Note that even > now, some of those pages may change more before 022 hits the servers. > > Thank you! > Dan > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] SMB and Netatalk
Hi to all There are someone with experience in running SMB and/or Netatalk over OmniOS ? Works OK ? Some caveats to avoid ? The possible scenario would be a server to hold Audio and Video files in a Video/Audio editing facility, with 10 GB network in/out, and 12 8 TB hard disks in Raid Z2, 2 256GB SSD to ZIL, no ARC, 128 GB RAM . Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: Install on Supermicro DOM=low space left
sorry, I forgot to change address to all list before send ... -- Forwarded message -- From: Fábio Rabelo <fa...@fabiorabelo.wiki.br> Date: 2017-01-26 9:21 GMT-02:00 Subject: Re: [OmniOS-discuss] Install on Supermicro DOM=low space left To: "Volker A. Brandt" <v...@bb-c.de> 2017-01-26 9:06 GMT-02:00 Volker A. Brandt <v...@bb-c.de>: > Hi Fábio! > > >> I've just installed OmniOS on a Supermicro Motherboard with a DOM >> device for boot . >> >> It is working fine, no issues ... >> >> But, the 64GB DOM has just 9GB of space left >> >> Can I delete something ( temp files, compacted installed packages, etc >> ) to free some space ? > > You might have oversized swap and/or dump volumes. Do a > > zfs list -t volume > > What volume sizes are shown NAME USED AVAIL REFER MOUNTPOINT rpool/dump 41.5G 9.15G 41.5G - rpool/swap 4.13G 13.0G 276M - I did not changed anything during instalation proccess, I've just accepted all defaults Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Install on Supermicro DOM=low space left
Hi to all I've just installed OmniOS on a Supermicro Motherboard with a DOM device for boot . It is working fine, no issues ... But, the 64GB DOM has just 9GB of space left Can I delete something ( temp files, compacted installed packages, etc ) to free some space ? I thing this 9GB free space may become an issue in the future . Thanks in advance for any help ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ASMedia 1061
Hi to all I am sorry if this subject hass allready been here, but I cannot find anything, so : Are the Sata cards baesd on ASMedia ASM 1061 supported by OmniOS ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] ixgbe: breaking aggr on 10GbE X540-T2
Hi to all A question: This are the board you used ? https://www.supermicro.com/products/motherboard/Xeon/C600/X10DRi-T4_.cfm If so, this board uses Intel X540, and this issue are only with Intel X550 chips ! Fábio Rabelo 2016-06-03 10:20 GMT-03:00 Stephan Budach <stephan.bud...@jvm.de>: > Hi Dale, > > Am 17.05.16 um 20:55 schrieb Dale Ghent: > > On May 17, 2016, at 8:30 AM, Stephan Budach <stephan.bud...@jvm.de> wrote: > > I have checked all of my ixgbe interfaces and they all report that now flow > controll is in place, as you can see: > > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe0 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe0 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe1 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe1 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe2 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe2 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe3 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe3 flowctrlrw no no no,tx,rx,bi > > I then checked the ports on the Nexus switches and found out, that they do > have outbound-flowcontrol enabled, but that is the case on any of those > Nexus ports, including those, where this issue doesn't exist. > > Optimally you would have flow control turned off on both sides, as the > switch still expects the ixgbe NIC to respond appropriately. To be honest, > the only time to use ethernet flow control is if you are operating the > interfaces for higher-level protocols which do not provide any sort of > direct flow control themselves, such as FCoE. If the vast majority of > traffic is TCP, leave it to the TCP stack to manage any local congestion on > the link. > > /dale > > I just wanted to wrap this up… I recently swapped that old Sun server with a > new Supermicro X10-type, which has 4 10 GbE NICs on board, installed OmniOS > r018 and my RSF-1 cluster software on it. Configured my two LACP > aggregations and there hasn't been any issue since. > So, either it's something on the old server - it's a Sun Fire X4170M2 - or > something on the Intel cards. > > Cheers, > Stephan > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
Thanks everyone ... Turns out the issue was Hard Disks ! All of them ! This system belongs to a mining company, and in the last month they made several deep explosions . Even some windows glasses have been blown out, and nobody cared to say that to me ... Problem solved . System will need to be rebuild from scratch using backups . Very "enjoyable" 2 or 3 days of work ahead ... Thanks everyone again ... Fábio Rabelo 2016-05-24 23:04 GMT-03:00 Bob Friesenhahn <bfrie...@simple.dallas.tx.us>: > On Tue, 24 May 2016, Dirk-Jan Wemmers wrote: > >> Hi Fabio, >> >> is your pool (or one of your individual vdev’s) almost full? ZFS >> performance can take quite a nosedive when it fills up above say 80%. > > > Also, deduplication can cause a precipitous nose-dive in performance if it > is enabled, enough data is written, and there is not enough memory. > > Bob > -- > Bob Friesenhahn > bfrie...@simple.dallas.tx.us, http://www.simplesystems.org/users/bfriesen/ > GraphicsMagick Maintainer,http://www.GraphicsMagick.org/ > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
Competely lost here ... Found what command replaced the "zfs_vdev_max_pending" , and it make no difference ! First, I added this command to /etc/system : set zfs:zfs_vdev_max_active = 1 make no diference, then added all this parameters : set zfs:zfs_vdev_async_read_max_active = 3 set zfs:zfs_vdev_async_read_min_active = 1 set zfs:zfs_vdev_async_write_max_active = 11 set zfs:zfs_vdev_async_write_min_active = 1 set zfs:zfs_vdev_max_active = 1 set zfs:zfs_vdev_scrub_max_active = 2 set zfs:zfs_vdev_scrub_min_active = 1 set zfs:zfs_vdev_sync_read_max_active = 10 set zfs:zfs_vdev_sync_read_min_active = 10 set zfs:zfs_vdev_sync_write_max_active = 1 set zfs:zfs_vdev_sync_write_min_active = 1 set zfs:zfs_vdev_async_write_active_max_dirty_percent = 60 set zfs:zfs_vdev_async_write_active_min_dirty_percent = 30 no diference either ... Yes. I rebooted the machine for the first and the second try . Someone has any clue ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
answering to myself : The disks in this system are all Western Digital, I may be in this issue : http://letsgetdugg.com/2009/10/21/zfs-slow-performance-fix/ But the module does not accept this command ( zfs_vdev_max_pending is not defined ) so, how can solve this issue ?? Fábio Rabelo 2016-05-24 10:10 GMT-03:00 Fábio Rabelo <fa...@fabiorabelo.wiki.br>: > Hi to all > > Got something here, and I have no idea what it can be ! > > Supermicro motherboard and chassis . > > LSI 2008 with IT firmware . > > Evething was working fine till yesterday . > > 2 years and a half ! > > Then, the performance goes terrible down . > > read/white from 5 to 8 MB/s sinse day one . > > Now is is in the Kb !!! > > none of the hard disks shows any error or warning . > > smart OK in all . > > I cannot find anything wrong, but there are something ... > > How can I figure it out ?? > > > Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] performance extrremely low from nothing !
Hi to all Got something here, and I have no idea what it can be ! Supermicro motherboard and chassis . LSI 2008 with IT firmware . Evething was working fine till yesterday . 2 years and a half ! Then, the performance goes terrible down . read/white from 5 to 8 MB/s sinse day one . Now is is in the Kb !!! none of the hard disks shows any error or warning . smart OK in all . I cannot find anything wrong, but there are something ... How can I figure it out ?? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI3108
I am a long time user of the IBM 1015 .. Problem : I have a customer who wants to build a pure SSD Storage with Sandisk 12 Gb/s SAS interface ! Is will run several SQL VMs in it to replace an aging SUN Server . Capicce ?? I do not have a choice to use 6 Gb/s HBAs ... Thanks ... Fábio Rabelo 2016-03-03 13:06 GMT-03:00 Andy Fiddaman <omn...@citrus-it.net>: > > On Thu, 3 Mar 2016, Dan McDonald wrote: > > ; > ; > On Mar 3, 2016, at 9:17 AM, Martin Dojcak <mar...@dojcak.sk> wrote: > ; > > ; > Hi, > ; > > ; > look at illumos Hardware Compatibility List: > ; > > ; > http://illumos.org/hcl/ > ; > > ; > there is support for LSI 3008 and 3108 hba > ; > ; Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 > (with IT firmware) is a simpler HBA and uses the mpt_sas(7D) driver. > > We are running some Dell R730s with PERC H730s (using LSI 3108) in > pass-through mode with the mr_sas driver. No problems here but I'd still > recommend choosing something that works with mpt_sas as that has been > better maintained and is well tried and tested. > > reaper# (132) megacli -AdpAllInfo -a0 > ... > Versions > > Product Name: PERC H730 Mini > Serial No : 4CF00C5 > FW Package Build: 25.2.2-0004 > ... > Direct PD Mapping: Yes > > dmesg: > > mr_sas0: 0x1000:0x5d 0x1028:0x1f49, irq:15 drv-ver:6.503.00.00ILLUMOS > mr_sas0: TBOLT device detected > mr_sas0: msi_enable = 1 > mr_sas0: enable_fp = 1 > mr_sas0: ctio_enable = 1 > mr_sas0 PCI Express-device: pci1028,1f49@0, mr_sas0 > mr_sas0 is /pci@0,0/pci8086,2f02@1/pci1028,1f49@0 > scsi: [ID 583861 kern.info] sd0 at mr_sas0: target 0 lun 1 > mr_sas0: Phys. device found: tgt 0 dtype 0: SEAGATE ST300MP0005 > scsi: [ID 583861 kern.info] sd1 at mr_sas0: target 1 lun 1 > mr_sas0: Phys. device found: tgt 1 dtype 0: SEAGATE ST300MP0005 > ... > > > -- > Citrus IT Limited | +44 (0)870 199 8000 | enquir...@citrus-it.co.uk > Rock House Farm | Green Moor | Wortley | Sheffield | S35 7DQ > Registered in England and Wales | Company number 4899123 > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI3108
OK, reading the manual for the controller ... I do not found anything like "passthru" What I did found was a fuction called "expose Hard Disk to Host" ... And, looks like is is what I need Coming back when I have the card in my hands ... Thanks again Fábio Rabelo 2016-03-03 12:31 GMT-03:00 Fábio Rabelo <fa...@fabiorabelo.wiki.br>: > OK .. > > So, I have to try it out at my own chance and risk ... > > Not today, but soon ... > > Thanks > > > Fábio Rabelo > > 2016-03-03 12:25 GMT-03:00 Dan McDonald <dan...@omniti.com>: > >> >> > On Mar 3, 2016, at 10:21 AM, Fábio Rabelo <fa...@fabiorabelo.wiki.br> >> wrote: >> > >> > >> > If 3108 are RAID, I still can configure my "tipical" RAID Z3 using >> each Hard Disk individualy ? >> > >> > Or OmniOS will only "see" the RAID array ? >> >> You'll have to use the MegaRAID BIOS crud to configure it to not HW-RAID >> the drives. Some of these let you have "passthru" which presents the raw >> SCSI device up to the OS. This is ideal. Older ones (e.g. 2108) would >> only let you create HW-RAID groups of one disk. This adds a layer of >> HW-RAID crap even though it's still a single drive. >> >> I know the 2208 would let you passthru. I've never tried a 3108 board, >> but I hope it's sane like the 2208. >> >> Dan >> >> > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI3108
Hi to all I just did a try in google to find if recent LSI3108 are supported in OmniOS, but did not find anuthing .. Someone knows the answer ? Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Xeon SOC with 10 GB net card
Hi to all Someone knows if the 10 GB network ports in this litle baby works with OmniOS ? http://www.supermicro.com/products/motherboard/Xeon/D/X10SDV-8C-TLN4F.cfm Yes, I am dreaming with a very compact pure SSD storage ;- )) With one 8 port SAS in the PCIe slot, plus 4 Sata 3 ports in the motherboard, with a DOM module to boot the system and the remainig Sata 3 to ZIL device Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Fwd: All SSD pool advice
And no expander ;- ))) I use 3 IBM SAS1015 flashed to IT, the only quality SAS controller with afordable price that I can find here in Brasil . Fábio Rabelo 2015-04-07 11:38 GMT-03:00 Chris Nagele nag...@wildbit.com: That helps a lot. That SC216BA-R1K28LPB chassis looks really nice, especially the two extra bays in the back for the rpool. Thanks everyone! Chris Nagele Co-founder, Wildbit Beanstalk, Postmark, dploy.io On Mon, Apr 6, 2015 at 10:04 AM, Schweiss, Chip c...@innovates.com wrote: On Mon, Apr 6, 2015 at 8:53 AM, Fábio Rabelo fa...@fabiorabelo.wiki.br wrote: Sorry, forget to forward to the list ... -- Forwarded message -- From: Fábio Rabelo fa...@fabiorabelo.wiki.br Date: 2015-04-06 10:51 GMT-03:00 Subject: Re: [OmniOS-discuss] All SSD pool advice To: Chris Nagele nag...@wildbit.com I never get my hands at that 4U model ... I have 2 of this babys in a customer of mine : http://www.supermicro.com/products/chassis/2U/216/SC216BA-R1K28LP.cfm Each one with 24 1TB Samsung 850PRO for a litle over an year, OminOS+Napp-it , no issue whatsoever ... Expanded Chassis brings me lots and lots of headaches ... The system I've built with interposers has SAS expanders and gives me no problems. Samsung SSDs are the only SSD I've found that works well with the interposer. -Chip Fábio Rabelo 2015-04-06 10:41 GMT-03:00 Chris Nagele nag...@wildbit.com: Thanks everyone. Regarding the expanders, our 4U servers are on the following chassis: http://www.supermicro.com/products/chassis/4U/846/SC846E16-R1200.cfm We are using all SAS disks, except for the SSDs. How big is the risk here when it comes to SAS - SATA conversion? Our newer servers have direct connections on each lane to the disk. Chris Chris Nagele Co-founder, Wildbit Beanstalk, Postmark, dploy.io On Sat, Apr 4, 2015 at 7:18 PM, Doug Hughes d...@will.to wrote: We have a couple of machines with all SSD pool (~6-10 Samsung 850 pro is the current favorite). They work great for IOPS. Here's my take. 1) you don't need a dedicated zil. Just let the zpool intersperse it amongst the existing zpool devices. They are plenty fast enough. 2) you don't need an L2arc for the same reason. a smaller number of dedicated devices would likely cause more of a bottleneck than serving off the existing pool devices (unless you were to put it on one of those giant RDRAM things or similar, but that adds a lot of expense) On 4/4/2015 3:07 PM, Chris Nagele wrote: We've been running a few 4U Supermicro servers using ZeusRAM for zil and SSDs for L2. The main disks are regular 1TB SAS. I'm considering moving to all SSD since the pricing has dropped so much. What things should I know or do when moving to all SSD pools? I'm assuming I don't need L2 and that I should keep the ZeusRAM. Should I only use certain types of SSDs? Thanks, Chris -- Chris Nagele Co-founder, Wildbit Beanstalk, Postmark, dploy.io ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: All SSD pool advice
Sorry, forget to forward to the list ... -- Forwarded message -- From: Fábio Rabelo fa...@fabiorabelo.wiki.br Date: 2015-04-06 10:51 GMT-03:00 Subject: Re: [OmniOS-discuss] All SSD pool advice To: Chris Nagele nag...@wildbit.com I never get my hands at that 4U model ... I have 2 of this babys in a customer of mine : http://www.supermicro.com/products/chassis/2U/216/SC216BA-R1K28LP.cfm Each one with 24 1TB Samsung 850PRO for a litle over an year, OminOS+Napp-it , no issue whatsoever ... Expanded Chassis brings me lots and lots of headaches ... Fábio Rabelo 2015-04-06 10:41 GMT-03:00 Chris Nagele nag...@wildbit.com: Thanks everyone. Regarding the expanders, our 4U servers are on the following chassis: http://www.supermicro.com/products/chassis/4U/846/SC846E16-R1200.cfm We are using all SAS disks, except for the SSDs. How big is the risk here when it comes to SAS - SATA conversion? Our newer servers have direct connections on each lane to the disk. Chris Chris Nagele Co-founder, Wildbit Beanstalk, Postmark, dploy.io On Sat, Apr 4, 2015 at 7:18 PM, Doug Hughes d...@will.to wrote: We have a couple of machines with all SSD pool (~6-10 Samsung 850 pro is the current favorite). They work great for IOPS. Here's my take. 1) you don't need a dedicated zil. Just let the zpool intersperse it amongst the existing zpool devices. They are plenty fast enough. 2) you don't need an L2arc for the same reason. a smaller number of dedicated devices would likely cause more of a bottleneck than serving off the existing pool devices (unless you were to put it on one of those giant RDRAM things or similar, but that adds a lot of expense) On 4/4/2015 3:07 PM, Chris Nagele wrote: We've been running a few 4U Supermicro servers using ZeusRAM for zil and SSDs for L2. The main disks are regular 1TB SAS. I'm considering moving to all SSD since the pricing has dropped so much. What things should I know or do when moving to all SSD pools? I'm assuming I don't need L2 and that I should keep the ZeusRAM. Should I only use certain types of SSDs? Thanks, Chris -- Chris Nagele Co-founder, Wildbit Beanstalk, Postmark, dploy.io ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] 6TB HDs
Hi to all In a new system, will be used just 6 TB Hard Discs, with LSI controlers, no expander whasoever . WD RED, TQ chassis from supermicro . I need to set Ashift to 12, or the Omni will do it automatically ? Thanks in advance ... ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Marvel based 10 GB network card
Hi to all Someone knows if this new 10 GB cards : http://www.startech.com/Networking-IO/Adapter-Cards/10gb-pcie-nic~ST1SPEX are, or will be supported in OmniOS ? They are incredibly afordable Works with linux, with very good performance ! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] napp-it forum ?
Anyone knows a forum about nnap-it ? I cannot found anything in the site Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] replace disk with difrferent model/size
Thanks a lot ! This user intent to replace the entire pool, so it is the best to change it . But I have no idea what I have to do so ... Point me to a doc with this info and I will read and apply . Many thanks again Fábio Rabelo 2014-10-06 11:48 GMT-03:00 Schweiss, Chip c...@innovates.com: Looks like you are trying to add a 4K disk to pool with ashift=9. If the disk is a 512e disk you can force it to ashift=9 by adding an entry in sd.conf. This will degrade write performance. It's best to move the whole pool to ashift=12 (4K sectors) or find a 512b native disk. -Chip On Mon, Oct 6, 2014 at 6:46 AM, Fábio Rabelo fa...@fabiorabelo.wiki.br wrote: Hi to all I have a system with failed hard disk . When I try to replace it, after 3 to 5 seconds thinking the system returns a msg like geometry mismatch error So, how can I replace a failed disk with another model or size ? This system uses 2 TB Hard disks, at first, I've installed 4 TB one, after this geometry error I get a try with 2 TB model, same result . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] how many HBAs my system have ?
How can I check how many HBA controlres do I have connected in a system, if this system are in a ( very ) remote location, and I just have SSH available ? prtconf -v returns too many noise ! prtconv -v |grep RAID returns only one line ... There is an easy way ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] how many HBAs my system have ?
Thanks for the tip ... Well, it would be my friend if it was present in my system : sasinfo: command not found Fábio Rabelo 2014-10-03 10:32 GMT-03:00 Bielicki, Michal m...@losstech.de: sasinfo is your friend. Kind regards / Grüße aus dem hohen Norden Michal Bielicki http://www.losstech.de/ http://www.innovationspreis-it.de/ Aktuelle Publikationen: http://www.innovationspreis-it.de/ www.losstech-blog.de losstech GmbH Hauptstraße 24, DE-25355 Lutzhorn mailto:m...@losstech.de m...@losstech.de +49 (0)4123 929900 (fon) +49 (0)4123 929911 (fax) Amtsgericht Pinneberg, HRB 5737 USt-Id: DE 227 8636 32 Hamburger Sparkasse, KTO 1217 149 150, BLZ 200 505 50 Sparkasse Südholstein, KTO 151 228 56, BLZ 230 510 30 *This message and any attachment is losstech proprietary and may be privileged or otherwise protected from disclosure.* *If you are not the intended recipient, please phone or email the sender and delete this message and any attachment from your system.* *If you are not the intended recipient you are not allowed to copy this message or attachment or disclose the contents to any other person and have to destroy all copies of the original message.* On 03 Oct 2014, at 15:25, Fábio Rabelo fa...@fabiorabelo.wiki.br wrote: How can I check how many HBA controlres do I have connected in a system, if this system are in a ( very ) remote location, and I just have SSH available ? prtconf -v returns too many noise ! prtconv -v |grep RAID returns only one line ... There is an easy way ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup?
+1 here . I had a similar issue, Supermicro Motherboard, originally with Kingston Memory, changed memory to Nanya, and this system are running smoothly for more than 8 mounts . Fábio Rabelo 2014-09-19 4:13 GMT-03:00 Matthew Lagoe matthew.la...@subrigo.net: I would run memtest on the system I have had similar issues in the past with bad ram/cpu/mobo Doesn't sound like a OS issue tbh -Original Message- From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On Behalf Of Chris Siebenmann Sent: Thursday, September 18, 2014 11:04 PM To: omnios-discuss@lists.omniti.com Subject: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup? We have a situation where one of our OmniOS NFS fileservers (running r151010 although not current on updates) is hanging/locking up mysteriously (other identical servers run fine). No messages are logged either to the console or to syslog and the machine becomes almost totally unresponsive; at best it pings, but input on the console is ignored and network services (including NFS) no longer respond. Beyond 'use mdb -K so we can capture a crash dump the next time this happens', do people have any suggestions for diagnosing the cause here? Thanks in advance. - cks PS: if people want to know the hardware and setup details, this and its links are a description of the systems: http://utcc.utoronto.ca/~cks/space/blog/solaris/ZFSFileserverSetupII The fileserver systems are not currently using the LSI SAS ports for anything so I believe we should be unaffected by any OmniOS issues there. ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: Tips on diagnosing an OmniOS lockup?
+1 here . I had a similar issue, Supermicro Motherboard, originally with Kingston Memory, changed memory to Nanya, and this system are running smoothly for more than 8 mounts . Fábio Rabelo Sorry, I forgot to mention, memtest did not show any error with Kingston memory, but after the change to nanya, the lockups completely stops ! Fábio Rabelo 2014-09-19 4:13 GMT-03:00 Matthew Lagoe matthew.la...@subrigo.net: I would run memtest on the system I have had similar issues in the past with bad ram/cpu/mobo Doesn't sound like a OS issue tbh -Original Message- From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On Behalf Of Chris Siebenmann Sent: Thursday, September 18, 2014 11:04 PM To: omnios-discuss@lists.omniti.com Subject: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup? We have a situation where one of our OmniOS NFS fileservers (running r151010 although not current on updates) is hanging/locking up mysteriously (other identical servers run fine). No messages are logged either to the console or to syslog and the machine becomes almost totally unresponsive; at best it pings, but input on the console is ignored and network services (including NFS) no longer respond. Beyond 'use mdb -K so we can capture a crash dump the next time this happens', do people have any suggestions for diagnosing the cause here? Thanks in advance. - cks PS: if people want to know the hardware and setup details, this and its links are a description of the systems: http://utcc.utoronto.ca/~cks/space/blog/solaris/ZFSFileserverSetupII The fileserver systems are not currently using the LSI SAS ports for anything so I believe we should be unaffected by any OmniOS issues there. ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI SAS3041e-HP
Hi to all Finaly I got my hands in this card, an LSI SAS3041e-HP http://mlb-s1-p.mlstatic.com/lsi-3041e-hp-4-portas-pci-e-3gbs-sas-sata-2-raid-low-prof-16467-MLB20121375810_072014-O.jpg But Omni are not recognising any disk connected to it ! Linux does . So the card are working, its bios shows-up during boot . Must be Bios/firmware related . But I do not find anything in the unraid sites about this card . Someone knows where I can find bios/firmware for IT mode that can work on this card ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI 3041e
Hi to all Quick question about a 4 port Sata card : I have an HP branded LSI 3041 card with 4 Sata ports on it . I need to reflash it, or it are supported by OmniOS Out of the Box ? Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ASMedia 1061 WORKING !
Hi to all I just plugged this card in an OmniOS box : http://sgp.imgmarket.net/sgp/201406/35765_b.jpg And the system recognises the hard disk connected to it, initialised it, and it is in use !!! I do not have yet anything about performance, but it is working !! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] AS Media 1061
Hi to all Someone has give a try recently any PCIe card based on the ASm Media 1061 SATA 3 chipset ? http://www.asmedia.com.tw/eng/e_show_products.php?item=118 all mentions I have found via google are, at least 3 years old ... although all says that it did not work ! I do not need to boot from it, I just need an extra port to add a ZIL disk to a system . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] SAS card compatibility
Hi to all Someone knows if this card are compatible ( or even the same ) with IBM M1015 ? http://www.amazon.com/IBM-Serveraid-Controller-System-81Y4448/dp/B007V8S0D8 It can be flashed with the same IT firmware as the M1015 ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] industrial usb flash
Hi to all People are talking about industrial grade usb flash storage to use as boot device for Omni and napp-it . Exactly witch brand build this kind of device ? I just can not find anything like that on amazon Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] create ordinary user
Using the repo http://scott.mathematik.uni-ulm.de/ wget -O - www.napp-it.org/afp | perl Nothing wrong here, but there are no ordinary user on the system, just the root ... Fábio Rabelo 2014-01-31 Zach Malone zmal...@omniti.com: What package repo did you install Netatalk from, or did you compile it yourself? Which utility is missing? On Thu, Jan 30, 2014 at 8:18 AM, Fábio Rabelo fa...@fabiorabelo.wiki.br wrote: Hi to all I am trying netatalk in an OminOS box, and having problem to create a user ... All and every how-to that I found in the web refers to an utilitary in command line from OpenSolaris, but this tool do not exist in OmniOS ... So, how can I create an ordinary user to authenticate against netatalk ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] create ordinary user
Hi to all I am trying netatalk in an OminOS box, and having problem to create a user ... All and every how-to that I found in the web refers to an utilitary in command line from OpenSolaris, but this tool do not exist in OmniOS ... So, how can I create an ordinary user to authenticate against netatalk ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] next stable release
Hi to all Please, there are no pressure here, just planning my next implementation ... When will be released the next stable branch ?? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Netgear 10GB switch LACP SOLVED
2013/10/16 Michael Rasmussen m...@miras.org: On Wed, 16 Oct 2013 12:41:39 -0300 Fábio Rabelo fa...@fabiorabelo.wiki.br wrote: Hi to all last week I ask here what was the most up-to-date how-to about LACP and OmniOS . Nobody answered, so I keep trying, and now I get it ! In the netgear 10 GB switch ( very good by the way !!! ) create the LACP with all defaults . In OmniOS I did this : dladm add-aggr -d ixgbe0 -d ixgbe1 1 According to the man page for dladm -d should be -l dladm add-aggr [-t] [-R root-dir] -l ether-link1 [-l ether-link2...] aggr-link That's the kind of problem I faced with this issue ... All how-tos over the web, ans most of man pages are out-dated ... I had to take one peace of info from here, another peace from there, and it took over a week to get all I need . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] from LACP to LAG1 ?!?
Hi to all I do not know if this is an off-topic, if it is, just inform me ... I will thank anyway .. I just received a follow-up from Netgear support in subject to a new 10GB switcher connecting to a Solaris box ( OmniOS naturaly, 151006 ) using LACP that is not working ( but works perfectly in another Cisco Switcher ) . They asked me to change from LACP to LAG1 , and I have no idea what they talking about ! Someone knows what is LAG1 ?!? And mostly, how to set it up ? Thanks in advance ... ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LACP on netgear switcher
Hi to all I am trying to setup an LACP with 2 ports on a 10 GB Netgear switcher, and it is not working ! The switcher works on 1GB ant 10GB rates, and with Linux hosts the link agregation works fine, so it is not something wrong in the switcher itself . My former switrch was a Cisco with 8 ports, and I need more ports, so I get a brand new netgear with 24 1G/10G . The link comes up, but no trafic comes in or out ... Someone had any issue like this ??? thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] poor nfs performence.
Hi to all .. This article were my guideline in my first implementation : http://constantin.glez.de/blog/2010/04/ten-ways-easily-improve-oracle-solaris-zfs-filesystem-performance My gess, you need more RAM . In your description of the system, you have a lot of processing power, but very litle RAM ... Sata controler can impact that too . Fábio Rabelo 2013/9/10 Muhammad Yousuf Khan sir...@gmail.com: i am using Raidz2 with 4 drives. i am using dell 490 with 2x3.0 Xeon processors. 12 GB RAM. 1 40gb HD for omni OS 4 different size disks for Raidz2. set of 2x160gb and 2x250 gb. every thing is working well except VM file transfer performance. hosted on NFS. when i SCP from omniOS to another linux server it copy root@omni:/acipool# scp test.tmp root@10.x.x.13:/ The authenticity of host '10.x.x.13 (10.xx.xx.13)' can't be established. RSA key fingerprint is da:x:xx:xx:8f:b1:ed:d9:f4:dd:e3xxx:21:5f:01:23. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.xx.xx.13' (RSA) to the list of known hosts. root@10.x.x.13's password: test.tmp 100% || 5120 MB07:37 which i think is fine due to Raidz and 2 parities. however on VM hosted on NFS taking too much time. a file of 500 MB copying from NFS to my desktops took 20 minutes. but file from my desktop to NFS is normal. for example a file of 500Mb taking less then a minute to copy. but same file when i try to copy from NFS to desktop some time it shows 100 plus minutes and dynamically changing time but eventually it is taking too much time. some time copying from NFS is a bit quicker and some time dead slow. one thing i have also noticed that once the copy is dead slow it suddenly starts copying the data very fast and it happens for few seconds and then again dead slow. any idea what is happening what mistake i am doing here ? any advice would be highly appreciated. i will share my further testing later. Thanks, Yousuf ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] 10GB adapter
This Intel card works with OmniOS ?? http://www.provantage.com/intel-x540t1~7ITEN0HQ.htm Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] OWC Mercury Accelsior
Some one tested one of this babys with OminOS : http://www.storagereview.com/owc_mercury_accelsior_pcie_ssd_review Specs are Little sketchy, but mention LSI chipset ... Thinking about ZIL and/or cache Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] flash to IT
Hi to all I have in my hands one IBM 1015, and I inttend to flash it to use with OmniOS . All how-tos I can find are a litle sparce, with not so sure abbout things ... Thare a a recommended way to do a cross-flash ?!? Thanks in advance . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ZIL partition size
Hi to all ... and thanks in advance ... I believe it is a simple question, there are a recommended and/or minimum size to a disk/partition to store ZIL logs ?!? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] grub timeout
Hi to all How can I change the grub timeout ? 30 seconds is too much ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Highpoint 640 or 640L
Hi to all Someone knows if Marvel based SATA cards works ? http://www.highpoint-tech.com/USA_new/series_rr600-overview.htm Highpoint rocketraid 640L : based on Marvel 88se9235 Highpoint rocketraid 640 : based on masrvel 88se9128 This cards are not for boot the system, just for zfs storage . I will put napp-it over Omni ... Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] D-Link FGE-528T
Hi to all ... This is my first post, from Brasil, so please forgive my bad English ... I am installing OmniOS to serve as Storage to a vitalization project . The hardware are Supermicro single Opteron . I intend to bind both embedded network port to talk with a dedicated switcher with the nodes ... So I need another network card top use to manage the OminOS . To that task I get a D-Link DGE-528T ( based on Realtek 8169S ) . But OmniOS do not recognise this card ! There are a way to workaround it ?? Or I will need to get another card ? I just have PCI slots available in this system, all PCIe slots are fulfilled with SATA cards ... Thanks in advance to any help Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
