in this system, all PCIe slots are
fulfilled with SATA cards ...
Thanks in advance to any help
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
.
I will put napp-it over Omni ...
Thanks in advance
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all
How can I change the grub timeout ?
30 seconds is too much ...
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all ... and thanks in advance ...
I believe it is a simple question, there are a recommended and/or minimum
size to a disk/partition to store ZIL logs ?!?
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http
Hi to all
I have in my hands one IBM 1015, and I inttend to flash it to use with
OmniOS .
All how-tos I can find are a litle sparce, with not so sure abbout things
...
Thare a a recommended way to do a cross-flash ?!?
Thanks in advance .
Fábio Rabelo
Some one tested one of this babys with OminOS :
http://www.storagereview.com/owc_mercury_accelsior_pcie_ssd_review
Specs are Little sketchy, but mention LSI chipset ...
Thinking about ZIL and/or cache
Fábio Rabelo
___
OmniOS-discuss mailing list
This Intel card works with OmniOS ??
http://www.provantage.com/intel-x540t1~7ITEN0HQ.htm
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
RAM ...
Sata controler can impact that too .
Fábio Rabelo
2013/9/10 Muhammad Yousuf Khan sir...@gmail.com:
i am using Raidz2 with 4 drives.
i am using dell 490 with 2x3.0 Xeon processors.
12 GB RAM.
1 40gb HD for omni OS
4 different size disks for Raidz2. set of 2x160gb and 2x250 gb
ports, and I need more ports, so
I get a brand new netgear with 24 1G/10G .
The link comes up, but no trafic comes in or out ...
Someone had any issue like this ???
thanks in advance
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss
Hi to all
I do not know if this is an off-topic, if it is, just inform me ... I
will thank anyway ..
I just received a follow-up from Netgear support in subject to a new
10GB switcher connecting to a Solaris box ( OmniOS naturaly, 151006 )
using LACP that is not working ( but works perfectly in
2013/10/16 Michael Rasmussen m...@miras.org:
On Wed, 16 Oct 2013 12:41:39 -0300
Fábio Rabelo fa...@fabiorabelo.wiki.br wrote:
Hi to all
last week I ask here what was the most up-to-date how-to about LACP and
OmniOS .
Nobody answered, so I keep trying, and now I get it !
In the netgear
Hi to all
Please, there are no pressure here, just planning my next implementation ...
When will be released the next stable branch ??
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman
netatalk ?
Thanks in advance ...
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Using the repo http://scott.mathematik.uni-ulm.de/
wget -O - www.napp-it.org/afp | perl
Nothing wrong here, but there are no ordinary user on the system, just
the root ...
Fábio Rabelo
2014-01-31 Zach Malone zmal...@omniti.com:
What package repo did you install Netatalk from, or did you
Hi to all
People are talking about industrial grade usb flash storage to use
as boot device for Omni and napp-it .
Exactly witch brand build this kind of device ?
I just can not find anything like that on amazon
Fábio Rabelo
___
OmniOS-discuss
Hi to all
Someone knows if this card are compatible ( or even the same ) with IBM M1015 ?
http://www.amazon.com/IBM-Serveraid-Controller-System-81Y4448/dp/B007V8S0D8
It can be flashed with the same IT firmware as the M1015 ?
Thanks in advance ...
Fábio Rabelo
from it, I just need an extra port to add a ZIL
disk to a system .
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all
I just plugged this card in an OmniOS box :
http://sgp.imgmarket.net/sgp/201406/35765_b.jpg
And the system recognises the hard disk connected to it, initialised
it, and it is in use !!!
I do not have yet anything about performance, but it is working !!
Fábio Rabelo
Hi to all
Quick question about a 4 port Sata card :
I have an HP branded LSI 3041 card with 4 Sata ports on it .
I need to reflash it, or it are supported by OmniOS Out of the Box ?
Thanks in advance
Fábio Rabelo
___
OmniOS-discuss mailing
shows-up during boot .
Must be Bios/firmware related .
But I do not find anything in the unraid sites about this card .
Someone knows where I can find bios/firmware for IT mode that can work
on this card ?
Thanks in advance ...
Fábio Rabelo
___
OmniOS
+1 here .
I had a similar issue, Supermicro Motherboard, originally with
Kingston Memory, changed memory to Nanya, and this system are running
smoothly for more than 8 mounts .
Fábio Rabelo
2014-09-19 4:13 GMT-03:00 Matthew Lagoe matthew.la...@subrigo.net:
I would run memtest on the system I
+1 here .
I had a similar issue, Supermicro Motherboard, originally with
Kingston Memory, changed memory to Nanya, and this system are running
smoothly for more than 8 mounts .
Fábio Rabelo
Sorry, I forgot to mention, memtest did not show any error with
Kingston memory, but after the change
How can I check how many HBA controlres do I have connected in a
system, if this system are in a ( very ) remote location, and I just
have SSH available ?
prtconf -v returns too many noise !
prtconv -v |grep RAID returns only one line ...
There is an easy way ?
Fábio Rabelo
Thanks for the tip ...
Well, it would be my friend if it was present in my system :
sasinfo: command not found
Fábio Rabelo
2014-10-03 10:32 GMT-03:00 Bielicki, Michal m...@losstech.de:
sasinfo is your friend.
Kind regards /
Grüße aus dem hohen Norden
Michal Bielicki
http
Thanks a lot !
This user intent to replace the entire pool, so it is the best to change it
.
But I have no idea what I have to do so ...
Point me to a doc with this info and I will read and apply .
Many thanks again
Fábio Rabelo
2014-10-06 11:48 GMT-03:00 Schweiss, Chip c
Anyone knows a forum about nnap-it ?
I cannot found anything in the site
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all
In a new system, will be used just 6 TB Hard Discs, with LSI controlers, no
expander whasoever .
WD RED, TQ chassis from supermicro .
I need to set Ashift to 12, or the Omni will do it automatically ?
Thanks in advance ...
___
Hi to all
Someone knows if this new 10 GB cards :
http://www.startech.com/Networking-IO/Adapter-Cards/10gb-pcie-nic~ST1SPEX
are, or will be supported in OmniOS ?
They are incredibly afordable
Works with linux, with very good performance !
Fábio Rabelo
Sorry, forget to forward to the list ...
-- Forwarded message --
From: Fábio Rabelo fa...@fabiorabelo.wiki.br
Date: 2015-04-06 10:51 GMT-03:00
Subject: Re: [OmniOS-discuss] All SSD pool advice
To: Chris Nagele nag...@wildbit.com
I never get my hands at that 4U model ...
I have
And no expander ;- )))
I use 3 IBM SAS1015 flashed to IT, the only quality SAS controller with
afordable price that I can find here in Brasil .
Fábio Rabelo
2015-04-07 11:38 GMT-03:00 Chris Nagele nag...@wildbit.com:
That helps a lot. That SC216BA-R1K28LPB chassis looks really nice
in the
motherboard, with a DOM module to boot the system and the remainig Sata 3
to ZIL device
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all
A question:
This are the board you used ?
https://www.supermicro.com/products/motherboard/Xeon/C600/X10DRi-T4_.cfm
If so, this board uses Intel X540, and this issue are only with Intel
X550 chips !
Fábio Rabelo
2016-06-03 10:20 GMT-03:00 Stephan Budach <stephan.bud...@jvm
OK, reading the manual for the controller ...
I do not found anything like "passthru"
What I did found was a fuction called "expose Hard Disk to Host" ...
And, looks like is is what I need
Coming back when I have the card in my hands ...
Thanks again
Fábio Rabe
Hi to all
I just did a try in google to find if recent LSI3108 are supported in
OmniOS, but did not find anuthing ..
Someone knows the answer ?
Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ?
Fábio Rabelo
___
OmniOS-discuss mailing list
I am a long time user of the IBM 1015 ..
Problem :
I have a customer who wants to build a pure SSD Storage with Sandisk
12 Gb/s SAS interface !
Is will run several SQL VMs in it to replace an aging SUN Server .
Capicce ??
I do not have a choice to use 6 Gb/s HBAs ...
Thanks ...
Fábio
is is in the Kb !!!
none of the hard disks shows any error or warning .
smart OK in all .
I cannot find anything wrong, but there are something ...
How can I figure it out ??
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
answering to myself :
The disks in this system are all Western Digital, I may be in this issue :
http://letsgetdugg.com/2009/10/21/zfs-slow-performance-fix/
But the module does not accept this command ( zfs_vdev_max_pending is
not defined )
so, how can solve this issue ??
Fábio Rabelo
2016
the first and the second try .
Someone has any clue ?
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
to be rebuild from scratch using backups .
Very "enjoyable" 2 or 3 days of work ahead ...
Thanks everyone again ...
Fábio Rabelo
2016-05-24 23:04 GMT-03:00 Bob Friesenhahn <bfrie...@simple.dallas.tx.us>:
> On Tue, 24 May 2016, Dirk-Jan Wemmers wrote:
>
>> Hi Fabio
Hi to all
I am sorry if this subject hass allready been here, but I cannot find
anything, so :
Are the Sata cards baesd on ASMedia ASM 1061 supported by OmniOS ?
Thanks in advance ...
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss
sorry, I forgot to change address to all list before send ...
-- Forwarded message --
From: Fábio Rabelo <fa...@fabiorabelo.wiki.br>
Date: 2017-01-26 9:21 GMT-02:00
Subject: Re: [OmniOS-discuss] Install on Supermicro DOM=low space left
To: "Volker A. Brandt" <v
space may become an issue in the future .
Thanks in advance for any help ...
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
256GB SSD to ZIL, no ARC, 128 GB RAM .
Thanks in advance ...
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
, please !!!
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi to all
There are a way to force the creation of a new boot environment ?
Thanks in advance
Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
WOW
Great news !!!
Solar Flare 10G network cards are fully supported now :?!?
Fábio Rabelo
2017-05-08 16:34 GMT-03:00 Dan McDonald <dan...@omniti.com>:
> I've updated bloody, and install media, today.
>
> illumos-omnios is at d2ed2f2489, omnios-build is at b902717c6
sorry, just realise, msg are not beeing forward to forum
Fábio Rabelo
-- Forwarded message --
From: Fábio Rabelo <fa...@fabiorabelo.wiki.br>
Date: 2017-08-21 7:06 GMT-03:00
Subject: Re: [OmniOS-discuss] manteinance mode
To: Hugh McIntyre <li...@mcintyreweb.com>
H
just realised, the pool are health, but the log drive shows missing !
Can it be the problem ?
Wil try to deatach it .
And :
> The only thing I can think of is ... did you refresh the active service
> manifest?
>
> e.g.
>
> svcadm refresh boot-archive:default
no effec
about how to change default BE ?
Thanks everyone
Fábio Rabelo
2017-08-21 7:44 GMT-03:00 Fábio Rabelo <fa...@fabiorabelo.wiki.br>:
> just realised, the pool are health, but the log drive shows missing !
>
> Can it be the problem ?
>
> Wil try to deatach it .
>
>
> A
49 matches
Mail list logo