On Wed, Nov 19, 2008 at 11:03 AM, Ulrich Windl
[EMAIL PROTECTED] wrote:
maybe some of you like to know what I think to have found out:
The HP EVA iSCSI connectivity MPX 100 box seems to be an OEM version of the
Qlogic iSR6140 Universal SAN Connectivity (with different firmware however).
Does
Hi,
maybe some of you like to know what I think to have found out:
The HP EVA iSCSI connectivity MPX 100 box seems to be an OEM version of the
Qlogic iSR6140 Universal SAN Connectivity (with different firmware however).
Unfortunately HP support seems to know a little less about the box than
I saw below the download link that open-iscsi-2.0-870 supports kernel 2.6.27
and i don't remember the version it comes with, 86something. I finally got
to work around this by moving it to the first to shutdown in /etc/rc6.d . I
moved it around different orders, but it finally worked when I made
Anthony C wrote:
I am running heavy load test to an array connected to SLES10 SP2
system (2.6.16.60-0.21) using open-iscsi and device-mapper multipath
that comes with the distro.
The test from time to time will also inititate lun reset. For
whatever reason, after couple hours I/O would
I've got a replacement timeout set to 86400 but after losing
connection to the iscsi device it will fail typically in a minute or
so:
Nov 19 17:03:43 desktop kernel: connection4:0: detected conn error
(1011)
Nov 19 17:03:44 desktop iscsid: Kernel reported iSCSI connection 4:0
error (1011) state
On 19 Nov 2008 at 14:43, Bart Van Assche wrote:
On Wed, Nov 19, 2008 at 11:03 AM, Ulrich Windl
[EMAIL PROTECTED] wrote:
maybe some of you like to know what I think to have found out:
The HP EVA iSCSI connectivity MPX 100 box seems to be an OEM version of
the
Qlogic iSR6140 Universal
On Thu, Nov 20, 2008 at 8:33 AM, Ulrich Windl
[EMAIL PROTECTED] wrote:
I assume there are quite a few iSCSI boxes without Ethernet interfaces ;-)
iSCSI does not only run over Ethernet but also over e.g. InfiniBand.
The box has two Gb Ethernet interfaces that, AFAIK, have hardware