Hi Erez
I can see the target disk in dmesg -c,but where is not device in /dev/
can you can help me ?
2009/12/21 Xintao Zhang zhangxintaofi...@gmail.com
Hi Erez
I do it with you method,I can see the target disk.
I want know what tools I can use if I use the ib_iSER module or I don't
want see
You shouldn't care too much about the ib_iser error message. If you
don't want to see it, edit /etc/init.d/open-iscsi and remove the
modprobe line that loads ib_iser.
Erez
On Mon, Dec 21, 2009 at 10:19 AM, Xintao Zhang
zhangxintaofi...@gmail.com wrote:
Hi Erez
I do it with you method,I can see
What is the output of 'iscsiadm -m session -P 3'? You should see something like:
Attached SCSI devices:
Host Number: 29 State: running
scsi29 Channel 00 Id 0 Lun: 0
Hi
am new to linux kernel module development. been going through the open-iscsi
code for some time now. i want to get and record memory page requests
directed to the virtual disk files (read or write) which i want to later
analyze and prefetch. this i hope to do with two modules (iscsiprefetcher
Just tried on another machine the loopback works very well.
There must be something I missed in the previous one...
Jack
On Dec 21, 2:56 pm, Jack Z brianzhang2...@gmail.com wrote:
Hi all,
I'm working on a loopback with open-iscsi initiator and iscsi
enterprise target.
I tried using a .img
Hi all,
I'm working on a loopback with open-iscsi initiator (2.0-871) and
iscsi
enterprise target(1.4.29).
I tried using a .img file and a physical partition on my local hard
disk as the target, but the results are the same: When logging in,
everything is fine and I can see the successful
Hi Erez
I use iscsitarget-1.4.19 in another pc.
In Windows xp I can use microsoft initiator operate the target in full
feature.
there is a screen print as following:
=
csi1 : iSCSI Initiator over TCP/IP
Vendor: IET Model: VIRTUAL-DISK Rev: 0
Type:
