Hello,
I'm trying to use open-iscsi with DS3300 array. DS has two controllers, each 2
ethernet ports.
Unfortunately I use some SATA disk that aren't capable to be connected into
two controllers (only one path on the SATA connector). This causes disks to be
accessible only through one
one more thing
i have tested this in a centos IP6 disabled 5.2 server where am not
getting
cnic: Unknown symbol __ipv6_addr_type
cnic: Unknown symbol ip6_route_output
but am geting /dev/mysql/mysql: read failed after 0 of 4096 at 0:
Input/output error
[r...@ussd1 /]# pvdisplay
Dear Mike
These all are LVM package what i have installed on system
[r...@wapdb-node1 /]# rpm -qa|grep lvm
lvm2-cluster-2.02.56-7.el5_5.4
system-config-lvm-1.1.5-4.el5
lvm2-2.02.56-8.el5_5.6
[r...@wapdb-node1 /]#
i tried by unmounting the device before restarting Iscsi service , But
after
Hi Mike,
I am facing a similar issue.
[r...@maverick iscsi]# service iscsid stop
Not stopping iscsid: iscsi sessions still active [WARNING]
Ok, so we have an active iscsi session.
[r...@maverick iscsi]# iscsiadm -m session
tcp: [10] 10.63.8.193:3260,1027 iqn.
On 11/25/2010 10:10 AM, SZÉKELYI Szabolcs wrote:
Hi,
I'm trying to figure out how to do discovery with authentication, without
luck. I didn't manage to set up the credentials, tried various ways. Iscsiadm
says:
iscsiadm -m discovery [ -hV ] [ -d debug_level ] [-P printlevel] [ -t type -p
On 11/27/2010 06:23 PM, Arkadiusz Miskiewicz wrote:
Hello,
I'm trying to use open-iscsi with DS3300 array. DS has two controllers, each 2
ethernet ports.
Unfortunately I use some SATA disk that aren't capable to be connected into
two controllers (only one path on the SATA connector). This
On 11/28/2010 01:44 PM, Bangalore wrote:
i tried by unmounting the device before restarting Iscsi service , But
I said you also need to have lvm release the devices. What you are doing
is unsupported and the results you are getting are expected.
Before running iscsi stop you need to have
On 11/29/2010 06:28 PM, Mike Christie wrote:
On 11/28/2010 01:44 PM, Bangalore wrote:
i tried by unmounting the device before restarting Iscsi service , But
I said you also need to have lvm release the devices. What you are doing
is unsupported and the results you are getting are expected.
