Hi Babar,
If you want to use a LimeSDR-mini, you should build latest master, and
use osmo-trx-lms binary. To generate that binary, you first need to
build and install latest LimeSuite master [1], and then build osmo-trx
with --with-lms configure flag. As you are building for raspberry pi3,
yo
Hi there,
I'm really happy to make my LimeSDR working with the master branch, good
job guys!
I'm now trying to enable the multi-arfcn multiplexed over one physical
channel but I do not succeed to have it working (No response from
transceiver for phy0.1 (CMD RXTUNE 894000)).
Do I need to configu
Hello,
I am trying some setup to have multiple channels working all together: I
have an UmTRX and a LimeSDR boards working fine.
The problem is that I cannot launch osmo-trx-uhd and osmo-trx-lms at the
same time as the VTY TCP port are defined in libosmocore.
Is it a way of disabling the VTY or ch
Hi Antony,
I didn't test myself this kind of setup and I bet nobody confirmed it is
working for osmo-trx-lms yet.
In any case, I think you need to tell osmo-trx to enable 2 channels, by
adding a "chan 1" node to your config, same as with you have with "chan
0", but with RX/TX paths set accor
Hi Antony,
You can change the IP addr in the VTY config. You can for instance add a
127.0.0.2 to your loopback iface and then point one of them to use that
IP addr.
See for an example vty cfg:
https://git.osmocom.org/osmo-gsm-tester/tree/src/osmo_gsm_tester/templates/osmo-trx.cfg.tmpl
line
On Wed, Jul 11, 2018 at 11:36:57PM +, Babar Ali wrote:
> Further kindly let me clear one more thing please, can I build osmotrx on
> RaspbianOS, I have already tried to build osmotrx v0.3 on RasbianOS [...]
why work with an old version?
If you want to use the latest features (such as native
