, Michael Stapleton michael.staple...@techsologic.com wrote:
Subject: Re: [OpenIndiana-discuss] Recovering from power loss on USB ZFS
pool?
To: Discussion list for OpenIndiana openindiana-discuss@openindiana.org
Date: Friday, March 28, 2014, 10:04 AM
I'm not sure when things changed
I'm not sure when things changed, but way back in the OpenSolaris days,
I had the root drive in my laptop mirrored to an external USB drive.
I never had problems back then. I would do a demonstration where I would
remove the USB drive while the laptop was up and running, and then plug
the USB
I have The same problem in ff 26.0 on OI u7 . Running firefox from the
command line gives the following error:
WORKER ERROR DURING SETUP Error: couldn't find function symbol in
library
WORKER ERROR DETAIL
@resource://gre/modules/osfile/osfile_unix_allthreads.jsm:72
My understanding is that the time is read from the NVRAM chip only once
when booting, then the time is updated by the kernel clock() function by
interrupt 10 while running.
High interrupt rates could cause the clock interrupt to be missed,
slowing time. A lot of serial activity could cause it.
I
Works well for me other than not being able to boot iPXE. 4.3 goes to
GURU meditation with iPXE. But it does it on all platforms. Windows and
Linux.
Mike
On Mon, 2013-11-18 at 15:43 +0100, Predrag Zecevic [Unix Systems
Administrator] wrote:
Hi,
well, i didn't measured anything, that is
Hi,
I have been working on a little project that might suit your needs.
It is in the final testing phase, and not public until now I guess, but
should work well for what you are doing.
It uses OI, OmniOS of Solaris11 as a storge / VM management server and
allows you to run VMs anywhere you like.
to use it in any way you like for as long as you
like.
Suggestions are welcome.
Mike
On Mon, 2013-06-24 at 21:54 +0200, Nikola M. wrote:
On 06/24/13 02:41 PM, Michael Stapleton wrote:
check out www.techsologic.com if you are interested.
I see it is closed source proprietary software
No problem :-)
Infinity uses VirtualBox to do the actual virtualization. Infinity
simply is a data/ VM management platform.
Mike
On Mon, 2013-06-24 at 14:24 -0600, Jan Owoc wrote:
On Mon, 2013-06-24 at 21:54 +0200, Nikola M. wrote:
On 06/24/13 02:41 PM, Michael Stapleton wrote:
check
I have no idea what the problem is, but it is worth noting that last
time I checked, Oracles storage arrays were running Solaris and Comstar.
Mike
On Mon, 2013-06-10 at 20:36 -0400, Heinrich van Riel wrote:
spoke to soon died again.
Give up. Just posting the result in case someone else run
Unless those servers already depend on your storage.
Mileage will vary :-)
Mike
On Thu, 2013-03-28 at 11:45 +, Edward Ned Harvey (openindiana)
wrote:
From: Michael Stapleton [mailto:michael.staple...@techsologic.com]
The Dhcp files can be stored on NFS and used by multiple servers
Hi,
The Dhcp files can be stored on NFS and used by multiple servers.
Mike
On Wed, 2013-03-27 at 22:17 +, Edward Ned Harvey (openindiana)
wrote:
From: Jim Klimov [mailto:jimkli...@cos.ru]
Well, at the time I documented this page, it worked (at oi_151a5
timeframe, I believe):
the symptom.
Mike
On Tue, 2013-03-26 at 14:26 +0100, Jim Klimov wrote:
On 2013-03-26 14:09, Michael Stapleton wrote:
Hi Jim,
Your SMF method is likely running asadmin.
Have you tried using the asadmin command directly to stop the domain?
It sounds like it could be the default 60 second socket
Klimov wrote:
On 2013-03-26 14:44, Michael Stapleton wrote:
There are a number of environmental variables used by asadmin, but I did
not find anything that looked promising.
As a last resort hack, you could you wrap the asadmin command in a
script.
I thought of changing the SMF method
On Solaris 10, I used to configure my zones to run xnest as the X server
with the display directed back to the global zone. xhosts in the global
zone was configured to allow the zones access.
It worked like a charm.
I even had a linux branded zone I used for google earth. In that case I
used
Found this in the review section:
Cons: New cards seems to have a Winbond W39F010 BIOS chipset which is
not supported by Silicon Image or Syba -- which means you can *NOT*
upgrade this card. The card will more than likely come with a BIOS from
2006, the latest is from 2010 and even then if you
The Organizations which use TX do not discuss the fact that they use TX.
That being said, those same organizations will not be using OI...
I personally really like TX. If you want actual security, it is the way
to go, but the problem with real security is that it really gets in the
way if you
You need to use the full path.
#pkgadd -d ./VirtualBox*.pkg
Note the ./
Mike
On Fri, 2013-01-04 at 19:42 +, peter jones wrote:
I am trying to install virtual box on a new installation 151a7 and have got
myself into difficulties.
After several attempt to download the new version from
Hello,
One little correction, Shutdown is fine because it is a shell script
that calls init.
Mike
On Fri, 2012-12-28 at 22:47 +0100, Jim Klimov wrote:
On 2012-12-28 21:45, Brogyányi József wrote:
Hi Bob
Thanks your answer. I'd like to know what does it mean clean shut down?
I think
FYI, there is a setting that controls how Solaris balances the frames
across the links in the aggregation.
IP, MAC or round robbin.
Mike
On Sat, 2012-11-17 at 01:19 +0100, Jim Klimov wrote:
On 2012-11-17 00:46, Roel_D wrote:
How about teaming? Is it supported under OI?
My memory
Hi Jim,
TCP/UDP tunable:
#ndd /dev/tcp tcp_extra_priv_ports
http://www.sean.de/Solaris/soltune.html#portnumbers
Mike
On Mon, 2012-11-05 at 16:59 +0100, Jim Klimov wrote:
Back in the old days when internet authors thought that there was
going to be not much server software, they created
, SMF and/or zone limit_priv props), right?
Thanks again,
//Jim
On 2012-11-05 17:11, Michael Stapleton wrote:
Hi Jim,
TCP/UDP tunable:
#ndd /dev/tcp tcp_extra_priv_ports
http://www.sean.de/Solaris/soltune.html#portnumbers
Mike
On Mon, 2012-11-05 at 16:59 +0100, Jim
You could try to set the crypo algorithm to none if you do not need
encryption.
ssh -c none
Might also be worth trying to see if it is ssh that is slowing you down.
Mike
On Tue, 2012-10-23 at 17:03 -0400, Doug Hughes wrote:
On 10/23/2012 4:13 PM, Timothy Coalson wrote:
Works pretty
Hi Jim,
Sounds to me like DTrace is the tool for you.
http://docs.oracle.com/cd/E19253-01/817-6223/chp-intro/index.html
It's not something you learn in 5 minutes, but it really is worth the
effort.
IPMP does not have to be configured with test addresses. IPMP will uses
Link based by default
Solaris 11 zonecfg support a NIC configuration called anet.
When such a zone boots, a lower-link (see below) will be
automatically determined and a temporary VNIC automati-
cally created over that link for the zone. The lower-
link and VNIC are deleted when the zone
, 2012-10-20 at 18:22 +0400, Jim Klimov wrote:
I really wonder how DTrace can help here - what should I track? ;)
2012-10-20 18:07, Michael Stapleton wrote:
IPMP does not have to be configured with test addresses. IPMP will uses
Link based by default if your NIC drivers support link state
ported to OI?
Mike
On Sat, 2012-10-20 at 18:52 +0400, Jim Klimov wrote:
2012-10-20 18:40, Michael Stapleton wrote:
I can't believe I'm saying this, but maybe this is a job for NWAM
profiles?
Intriguing, at least ;)
I wonder if NWAM can provide a single IP interface (over which
vnics
+0400, Jim Klimov wrote:
2012-10-20 19:05, Michael Stapleton wrote:
Maybe you could have your zones and the global zone on an etherstub
through VNICs,
Then route from the global zones real NIC to the VNIC connected to the
etherstub. Can you use NAT? IP addresses might be the next challenge
help my case - not without an
intermittent reboot, or some (SMF?) script to vanity-name the correct
interface and continue with dladm setup of the system.
That's something but not enough to satisfy me ;)
2012-10-20 20:08, Michael Stapleton wrote:
Bridging only supports physical NICs
for hardware messages should be a daily job
Kind regards,
The out-side
Op 13 okt. 2012 om 05:26 heeft Michael Stapleton
michael.staple...@techsologic.com het volgende geschreven:
I'm not a mathematician, but can anyone calculate the chance of the Same
8K datablock on Both submirrors
:02 +0400, Jim Klimov wrote:
2012-10-13 7:26, Michael Stapleton wrote:
The VAST majority of data centers are not storing data in storage that
does checksums to verify data, that is just the reality. Regular backups
and site replication rule.
And this actually concerns me... we help
It is easy to understand that zfs srubs can be useful, But, How often do
we scrub or the equivalent of any other file system? UFS? VXFS?
NTFS? ...
ZFS has scrubs as a feature, but is it a need? I do not think so. Other
file systems accept the risk, mostly because they can not really do
anything if
/12/12, Michael Stapleton michael.staple...@techsologic.com
wrote:
I'm only writing this because I get the feeling some people
think scrubs
are a need. Maybe people associate doing scrubs with
something like
doing NTFS defrags?
I normally do scrubs when I think about it. Which
Hughes wrote:
So?}?\, a lot of people have already answered this in various ways.
I'm going to provide a little bit of direct answer and focus to some of
those other answers (and emphasis)
On 10/12/2012 5:07 PM, Michael Stapleton wrote:
It is easy to understand that zfs srubs can be useful
catman -w
create the windex database that is
used by whatis(1) and the man(1) -f and
-k options. No manual reformatting is
done.
Mike
Hello listmates,
If may man command does not display some of the pages
As a general rule, If you are scanning you need more RAM, If your
applications are complaining you need more swap.
Having endless swap just lets applications drive the server into the
ground.
Solaris uses virtual swap.
VMstat sr column == 0
Mike
On Tue, 2012-09-25 at 19:41 +0100, Peter
Have you tried to configure pkg/server to listen on 127.0.0.1 ?
# svccfg -s pkg/server setprop pkg/address = net_address: 127.0.0.1
# svcadm refresh pkg/server
# svcadm restart pkg/server
Mike
?On Sun, 2012-09-09 at 11:25 +0200, Ivan Gualandri wrote:
Thank you yuri,
unfortunately it
other idea?
My problem is that OpenIndiana supports my network card only using myk
driver, but i found only a version that need to be compiled, but the
default installation of OI doesn't have gcc, then i must install that
package :(
Thanks,
Ivan
On 9 September 2012 17:13, Michael
How about reboot -p
-p
Reboot to prom. This flag can be used to reboot the sys-
tem through firmware without changing the default reboot
behavior as denoted by the config/fastreboot_default
property setting in system/boot-config service.
This
Have you looked at your /etc/remote settings? Might be something there?
Why do you need DOS new line? Is there something on the controller that
can be configured?
#man remote
.
.
.
pr
(str) Character that indicates end-of-line on the
remote host. The default value
Would not webmin be a good fit? Develop good modules for webmin to
manage OI with.
Mike
On Sun, 2012-09-02 at 17:02 +0200, Open Indiana wrote:
It's not that OI doesn't have to have a GUI, it's only that not all settings
have to be set OVER a GUI.
Of course it needs a decent GUI, but that
I have been developing a virtualization product that runs on OI, It's
written in Java but uses ZFS and Comstar so the server side has to be
Iluminos/Solaris11 based.
For me, development and testing has been much more efficient by running
OI on my workstations and laptops.
When I'm traveling, I can
I have not looked at this in a long time, But multiple SUN DHCP servers
used to be able to use a common NFS share of their configuration files.
Yes the server can be configured to ping(Test) the addresses.
Mike
michael.staple...@techsologic.com
On Thu, 2012-08-09 at 03:51 +0400, Jim Klimov
Hi,
I have been using Solaris only since 2.6 and /home has always been an
autofs mount point. What version of Solaris did not have /home as an
autofs mount point?
Or are you confusing OI with some other OS?
Mike
. On Mon, 2012-08-06 at 09:51 -0400, Daniel Kjar wrote:
I am sure it has great
Do you have the VBox client utilities installed? I had seen strange
clock problems when the Agent is not installed.
Mike
On Tue, 2012-08-07 at 12:31 +0800, Patrick Yu wrote:
I was actually trying to say strange problem of TCP reset packet (or
the the lack of). :-)
Anyway, after some more
/.iso
Now when I cd to /mountedISO/xp, the /ISO/xp.iso is mounted.
If I cd tp /mountedISO/OI, the /ISO/OI.iso is mounts
And so on.
Drop a new iso in /ISO and cd to /mountesISO/? to access it.
Mike
On Wed, 2012-07-18 at 08:09 -0400, Michael Stapleton wrote:
I have a bit more time
09:58 AM, Michael Stapleton wrote:
more /lib/svc/method/ipfilter
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Or a job for autofs.
Check out the man page for automount.
Mike
On Tue, 2012-07-17 at 12:43 -0400, Ray Arachelian wrote:
On 07/17/2012 12:34 PM, Ray Arachelian wrote:
On 07/17/2012 09:29 AM, Aneurin Price wrote:
Hello all,
From the command line, I can mount an iso image using mount
Are All the VMs on the same host? How about VBox shared folders?
Mike
On Fri, 2012-04-27 at 12:01 -0500, Ron Parker wrote:
On Fri, Apr 27, 2012 at 11:24 AM, Travis Lawrie tlawri...@gmail.com wrote:
oi, napp-it, esxi, vt-d, compatible hba in it mode, passthrough, cifs
shares, nfs shares,
Try using just
http://pkg.sonicle.com;
Mike
On Thu, 2012-03-15 at 10:40 +0100, Gabriele Bulfon wrote:
Hi,
I'm a bit confused about how to use the proxybase on pkg.depotd.
I have a server running on OI mirror on port 8151, not public.
I want it to be reversed proxy by my public apache like
One.
Michael Stapleton
On Sun, 2011-11-27 at 20:07 -0300, Ignacio Marambio Catán wrote:
On Sun, Nov 27, 2011 at 7:56 PM, Matt Connolly
matt.connolly...@gmail.com wrote:
On 28/11/2011, at 1:35 AM, Bill Sommerfeld wrote:
On 11/27/11 04:36, Matt Connolly wrote:
This still didn't help
On Mon, 2011-11-28 at 01:09 -0300, Ignacio Marambio Catán wrote:
by that reasoning, if you wanted a primary administrator, you'd assign
the root role and be done with it.
On Mon, Nov 28, 2011 at 12:50 AM, Michael Stapleton
michael.staple...@techsologic.com wrote:
Hello,
I have to disagree
Hello,
There is an issue running VirtualBox with ZFS. ZFS will cause
fragmentation of memory which is usually not a problem, but due to the
nature of how VirtualBox attempt to lock down continuous chunks of RAM,
it is a problem for VBox. If you are running VBox and ZFS, cap the ARC
cache...
Hi,
I had similar hard lockups when I accidentally tried to delete a ZFS
Volume while doing a ZFS send at the same time.
There seems to be a missing lock.
In the end I had to ensure that I did not run concurrent zfs commands.
Are there any other ZFS commands hung at the same time?
Mike
On
,
now what's the meaning of this figures?
Regards,
Gernot Wolf
Am 20.10.11 19:22, schrieb Michael Stapleton:
Hi Gernot,
You have a high context switch rate.
try
#dtrace -n 'sched:::off-cpu { @[execname]=count()}'
For a few seconds to see if you can get the name
So, quite obviously there is one executable standing out here, sched,
now what's the meaning of this figures?
Regards,
Gernot Wolf
Am 20.10.11 19:22, schrieb Michael Stapleton:
Hi Gernot,
You have a high context switch rate.
try
#dtrace -n 'sched:::off-cpu { @[execname
/index.html
does it help?
On Thu, Oct 20, 2011 at 20:23, Michael Stapleton
michael.staple...@techsologic.com wrote:
My understanding is that it is not supposed to be a loaded system. We
want to know what the load is.
gernot@tintenfass:~# intrstat 30
device | cpu0 %tim
---
5441 93% 93% 0.00 3132 cpu[0]
i86_mwait
Mike
On Thu, 2011-10-20 at 20:37 +0200, Michael Schuster wrote:
On Thu, Oct 20, 2011 at 20:33, Michael Stapleton
michael.staple
+1
Mike
On Thu, 2011-10-20 at 11:47 -0700, Rennie Allen wrote:
I'd like to see a run of the script I sent earlier. I don't trust
intrstat (not for any particular reason, other than that I have never used
it)...
On 10/20/11 11:33 AM, Michael Stapleton
michael.staple...@techsologic.com
of it...
Regards,
Gernot
Am 20.10.11 20:17, schrieb Michael Schuster:
Gernot,
is there anything suspicious in /var/adm/messages?
Michael
On Thu, Oct 20, 2011 at 20:07, Michael Stapleton
michael.staple...@techsologic.com wrote:
That rules out userland.
Sched tells me
I would not worry about it. The messages are being caused by some
problem. Lets focus on getting the messages.
Debug will increase your load, but not like you are seeing.
Mike
On Thu, 2011-10-20 at 22:10 +0200, Gernot Wolf wrote:
Ok, here we go:
gernot@tintenfass:~# mdb -k
Loading modules:
Is this running in a VM?
Mike
On Thu, 2011-10-20 at 22:20 +0200, Gernot Wolf wrote:
Grep output attached. Hopefully this attachement will go through ;)
Regards,
Gernot Wolf
Am 20.10.11 21:25, schrieb Michael Stapleton:
Attachment is missing...
I'd like to see the whole things
While we are talking about 32 | 64 bit processes;
Which one is better?
Faster?
More efficient?
Mike
On Thu, 2011-06-23 at 13:59 +0100, Deano wrote:
Windows made the shift last server release (2008r2 is x64 only).
So it's only the OSS server families which support 32bit, likely because
limitations further curtail this, but 48G motherboards are now
commonplace.
On 32 bit Intel (Amd) you are typically limited to 4G, which is split between
kernel and userland
depending on the OS and configuration. (E.g.: 1G kernel and 3G userland)
Steve
- Michael Stapleton
on files with no problem
Thanx for your precious analysis ;)
--
Da: Michael Stapleton
A: Discussion list for OpenIndiana
Data: 21 giugno 2011 17.18.41 CEST
Oggetto: Re: [OpenIndiana-discuss] Openindiana in VMWare
Maybe the output of:
truss -t stat,open tip /dev/cua/0
will give us something to work with.
Mike
On Mon, 2011-06-20 at 12:54 +0200, Gabriele Bulfon wrote:
Hi, I had no trouble with usb devices on native openindiana installations.
Now I installed openindiana inside VMWare4.1 that supports
When I need a root terminal, I tend to simply:
$sudo sh
In a Solaris only environment I advise RBAC , but in a mixed Unix/Linux
world, sudo makes more sense.
With RBAC and root being a Role, we should su - to assume the root
role.
Mike
On Tue, 2011-06-14 at 14:24 -0700, Gregory Youngblood
Am I reading it wrong or do you mean it drops off at 16MB, not 16 KB?
Mike
On Sat, 2011-06-11 at 09:44 -0400, Dan Swartzendruber wrote:
What was serving the nfs and iscsi?
-Original Message-
From: Gary [mailto:gdri...@gmail.com]
Sent: Saturday, June 11, 2011 2:29 AM
To:
Very nice Gabriel.
I for one would be happy to share a beer with you or anyone else who is
on this list for that matter. I think it's safe to say that anyone one
who is on this list is a little special. I think it's also safe to say
that we all share a common desire to see this great OS continue
I have been using OI for development and as a production server and have
had NO problems stability wise. On my laptop I found that the SMB
service is preventing sleeping. If I disable SMB service, power saving
works well. But, something is reenabling the service,
OI is not unstable, we should stop
69 matches
Mail list logo
