Hello,
so no, the issue is not somewhere else, but it's directly on the solaris and it
happens on both b134 and b111b (OS 2009.06).
The issue is this: OS runs on Lenovo T500 which provides wifi card and e1000g0
card. When I boot and let OS boot without cable pluged into the e1000g
connector
Plain-vanilla Dell Precision Workstation T7500; I also installed Osol on my
older Precision Workstation 690. Same thing---inevitably sporadic power-off...
--
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
On Wed, 17 Mar 2010, Luke Vanderfluit wrote:
Hi.
I have a solaris 10 box that houses samba shares. The box becomes inaccessible
at unpredictable times. I want to enable logging to see what activity is going
on and log that to /var/adm/messages
I have edited the syslog.conf file and added the
Hi,
On Thu, Mar 18, 2010 at 02:20:17AM -0700, Karel Gardas wrote:
Hello,
so no, the issue is not somewhere else, but it's directly on the solaris and
it happens on both b134 and b111b (OS 2009.06).
The issue is this: OS runs on Lenovo T500 which provides wifi card and
e1000g0
On 11/03/2010 12:07, Rob McMahon wrote:
Thanks for the suggestions, but I think this is my own fault. I
think I've shot myself in the foot by enabling compression on rpool.
Replying to myself in case anyone else gets themselves in this position.
What worked for me was to burn a new 134
Thanks!
So, I wrote a quick script to look through the options available to me
with locale -a, and then run the date command. Output is attached.
The closest thing to what I was after was zh_CN.UTF-8, which I now set
via this line in .bashrc
export LC_TIME=zh_CN.UTF-8
(I work in Beijing,
Thanks Matthias for your comments! Wireless router that supports my 3G is
actually a very good idea (these are pretty cheap today I suppose) and the
possible solution I will use if I will not get this 3G USB modem to work with
the configuration tips I might get from other users.
Thanks for
Thanks Ken! I will do that and see if somebody can help me. I'm at work at the
moment, but will post the output of mdb -k ::prtusb -i e -v command once I
get home to my personal computer.
Can't wait to get Open Solaris to work on my computer.
--
This message posted from opensolaris.org
Greetings
Just asking , is there interest to port MythTV to OpenSolaris.
http://www.mythtv.org/
--
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
I don't believe you HAVE to run zap; you can run a timer module if i remember
right. I haven't done a lot with Asterisk in a few years beyond usage.. We
were a very early adopter of it and liked it a lot. The zaptel drivers were
used early on for several timing functions, especially related
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 18.03.2010 15:20, homerun wrote:
Greetings
Just asking , is there interest to port MythTV to OpenSolaris.
http://www.mythtv.org/
Actuall, I'd have a personal interest (as an end user) for this. A
mini-itx box running OpenSolaris would make
On 03/18/10 10:20 AM, homerun wrote:
Greetings
Just asking , is there interest to port MythTV to OpenSolaris.
http://www.mythtv.org/
How long will the supported list of video capture cards be useful?
The notices I've been receiving from Comcast sound like they are
moving to most
My EeePC701 works quite nicely with b133 (from Masafumi Ohta), except some
reliability problems with Firefox (resulting in unkillable firefox process).
But after upgrade to 134 the kernel freezes about every ten seconds for very
long time (maybe 200-500ms?):
$ vmstat 1
kthr memory
Hi Jouko
sorry I haven't tried b134 I will try this weekend on my eee 701.
and let me check about firefox problem as you say.
-masafumi
On 2010/03/19, at 1:12, Jouko Holopainen wrote:
My EeePC701 works quite nicely with b133 (from Masafumi Ohta), except some
reliability problems with
Can anyone help me with the following problem?
I just completed a clean install of opensolaris 2009.06 and wanted to install
ComStar - I'm getting the following error when attempting to install:
jfree...@pular:/dev/zvol/rdsk# pfexec pkg install storage-server
Creating Plan |
[b]pkg: Could not
I know, it was discussed many times. I know, that it is maybe the wrong place
to ask :). But anyway...
For now Solaris security updates are non-free. OpenSolaris /dev is not a good
choice for a server. OpenSolaris support repository is closed... Is there any
way to receive secure (Open)Solaris
The firefox freezes completely (unkillble process, must force shutdown) in b134.
Now I'm investigating if swap (on zfs on sd disk) might be part of problem.
--
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
On 19/03/2010, at 12:20 AM, homerun wrote:
Just asking , is there interest to port MythTV to OpenSolaris.
http://www.mythtv.org/
There is definite interest.
Ken Mays reported building it from source on desktop-discuss quite some time
ago and when I queried him about it late last year he
2010/3/18 Kaya Bekiroğlu k...@bekiroglu.com:
I first noticed this panic when conducting hot-swap tests. However,
now I see it every hour or so, even when all drives are attached and
no ZFS resilvering is in progress.
It appears that these panics recur on my system when the
zfs-auto-snapshot
I've just finished installing storage-server and so now I am at the step to
'Create a ligical unit using the volume' command: sbdadm create-lu
/dev/zvol/rdsk/pool_1/vol_1
I keep getting Unable to open device. Is the driver attached? I've never
see this message before.
--
This message
you probably need to restart the server after installing the
storage-server package in order for some of the relevant kernel
modules to load.
have you done that?
nacho
On Thu, Mar 18, 2010 at 6:03 PM, Jeff Freeman
freeman.jeff...@verizon.net wrote:
I've just finished installing storage-server
I've got two monitors hooked-up to the DVI ports of a GeForce 8600 video
card.
Recently moved the computer into the living-room, and want to run my TV
off of the s-video port.
I've tried numerous different settings, but can only get two heads to
work at the same time.
Has anyone done
On Fri, 19 Mar 2010 06:24:29, James Lever wrote:
On 19/03/2010, at 12:20 AM, homerun wrote:
Just asking , is there interest to port MythTV to OpenSolaris.
http://www.mythtv.org/
There is definite interest.
Ken Mays reported building it from source on desktop-discuss quite some time
Hello, I downloaded a package using pkgrecv and now I am trying to add it to
the local repository. I keep getting this error that I don't know how to fix or
what the problem is
eval `pkgsend -s http://localhost:80/ open
fac...@1.5.7%2c5.11-0.1%3a20091019t112931z`
pkgsend: 'open' failed for
On 03/18/10 04:57 PM, melbogia wrote:
Hello, I downloaded a package using pkgrecv and now I am trying to add it to
the local repository. I keep getting this error that I don't know how to fix or
what the problem is
eval `pkgsend -s http://localhost:80/ open
On Thu, Mar 18, 2010 at 4:14 PM, Jouko Holopainen
jouko.holopai...@iki.fiwrote:
The firefox freezes completely (unkillble process, must force shutdown) in
b134.
Now I'm investigating if swap (on zfs on sd disk) might be part of problem.
In your first email you said that the kernel freezes,
On 03/18/10 05:17 PM, robs wrote:
I've got two monitors hooked-up to the DVI ports of a GeForce 8600
video card.
Recently moved the computer into the living-room, and want to run my
TV off of the s-video port.
I've tried numerous different settings, but can only get two heads to
work at
I just tried that and got the same error. Where would the logs be for the depot
server? Is it the same as pkg/server logs at the following location?
/var/svc/log/application-pkg-server:default.log
I looked at that but the last thing it has is when I restarted the pkg/server
service.
--
This
On Thu, Mar 18, 2010 at 3:35 PM, Alexander a...@rsu.ru wrote:
I know, it was discussed many times. I know, that it is maybe the wrong
place to ask :). But anyway...
For now Solaris security updates are non-free. OpenSolaris /dev is not a
good choice for a server. OpenSolaris support
On 03/18/10 05:29 PM, melbogia wrote:
I just tried that and got the same error. Where would the logs be for the depot
server? Is it the same as pkg/server logs at the following location?
/var/svc/log/application-pkg-server:default.log
I looked at that but the last thing it has is when I
This log
/var/svc/log/application-pkg-server:default.log
exists but the last information it has is the pkg server restart that I did
last time. The pkg/log_errors property wasn't changed when I set this up and is
set to 'stderr'
svccfg -s pkg/server listprop pkg/log_errors
pkg/log_errors
Yes please!
There are some simple use-cases that would be extremely helpful, long
before worrying about device driver support for tuner cards:
1 packaging convenience for various ancilliary but vital components
that can run away from the main myth box (e.g. mythweb server)
2 a
Jouko Holopainen wrote:
The firefox freezes completely (unkillble process, must force shutdown) in
b134.
Now I'm investigating if swap (on zfs on sd disk) might be part of problem.
I've seen this behavior on snv_132 using an sd disk as well (running
nightly builds, nothing interactive).
Thank you so much for responding :-) I just read that you need to reboot!
-Original Message-
From: Ignacio Marambio Catán [mailto:darkjo...@gmail.com]
Sent: Thursday, March 18, 2010 5:08 PM
To: Jeff Freeman
Cc: opensolaris-discuss@opensolaris.org
Subject: Re: [osol-discuss] Problem
There are two problems now ... I bet I was a bit confusing, sorry.
1. The kernel freezes for a few hundred ms in b134 (does not happen in b133).
Number of running kernel threads jumps up suddenly - see the vmstat output. No
clue why.
2. Firefox dies/freezes and cannot be killed (kill -9 has no
More info, sorry for spamming ...
1. The kernel freezes for a few hundred ms in b134
(does not happen in b133).
More specifically when the kernel freezes nothing else works, mouse stops,
real time priority class processes stop, keyboard input stops, etc. Not sure
about network (wireless) or
36 matches
Mail list logo
