at 12:57 AM, Razique Mahroua
razique.mahr...@gmail.comwrote:
Hi Ahmed,
can you run
$ pvdisplay
and
$ vgdisplay
can we see /etc/cinder/cinder.conf ?
thanks,
*Razique Mahroua** - **Nuage Co*
razique.mahr...@gmail.com
Tel : +33 9 72 37 94 15
Le 5 déc. 2012 à 09:54, Ahmed Al-Mehdi
, Ahmed Al-Mehdi ahmedalme...@gmail.com
wrote:
Hello,
I setup a two node OpenStack setup, one controller-node and one
compute-node. I am using Quantum, Cinder services, and KVM for
virtualization. I am running into an issue creating a volume through
Horizon which I will attach to a VM
by the flavor has effects on the size of
the boot disk.
Hope it helps,
Marco.
On Mon, Dec 3, 2012 at 7:03 PM, Ahmed Al-Mehdi ahmedalme...@gmail.comwrote:
Hello,
I instantiated a VM using the cirros image, using the pre-defined
m1.small (1 VCPU, 2 GB Ram, 20G boot disk, 0 Ephemeral disk). I
report of the resources currently used by a node.
To my knowledge, the dashboard does not provide a similar page, at the
time being.
Hope it helps,
Marco.
On Tue, Dec 4, 2012 at 4:40 PM, Ahmed Al-Mehdi ahmedalme...@gmail.comwrote:
Hi Marco,
Thank you very much for the info, much much
Hello,
I setup a two node OpenStack setup, one controller-node and one
compute-node. I am using Quantum, Cinder services, and KVM for
virtualization. I am running into an issue creating a volume through
Horizon which I will attach to a VM later on. The status of volume in
Horizon is stuck at
-893abf5dc5ce returned
with HTTP 200
Regards,
Ahmed.
On Tue, Dec 4, 2012 at 9:44 AM, Ahmed Al-Mehdi ahmedalme...@gmail.comwrote:
Hello,
I setup a two node OpenStack setup, one controller-node and one
compute-node. I am using Quantum, Cinder services, and KVM for
virtualization. I am
Hello,
In my setup, cinder.conf is set as follows:
root@novato:/etc/cinder# cat cinder.conf
[DEFAULT]
rootwrap_config=/etc/cinder/rootwrap.conf
sql_connection = mysql://cinderUser:cinderPass@10.176.20.102/cinder
api_paste_confg = /etc/cinder/api-paste.ini
iscsi_helper=ietadm
volume_name_template
Hello,
I followed the document to setup my OpenStack environment, using on
controller-node, and one compute-node - (
https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/e6e797f991fe79b46c6087e2098d7117ff7b828b/OpenStack_Folsom_Install_Guide_WebVersion.rst
.
(Please note this is an
Hello,
I instantiated a VM using the cirros image, using the pre-defined
m1.small (1 VCPU, 2 GB Ram, 20G boot disk, 0 Ephemeral disk). I then
logged into the console of the VM to view some system stats. The num of
CPU and memory makes sense, but I am a bit confused on the storage aspect.
I see
.
On Wed, Nov 28, 2012 at 4:13 PM, Ahmed Al-Mehdi ahmedalme...@gmail.comwrote:
Hi Razique,
Thank you helping out. Yes, I see an IP addr assigned to the instance.
And yes, I am using libvirt.
root@novato:~/ahmed# nova list
Hello,
I setup an two node OpenStack setup, running Quantum and Cinder components.
After I launched the VM (based on cirros image), I logged into it through
the Console. When I do an ifconfig, I see that eth0 is up, it's status
is UP BROADCAST RUNNING However, I don't see an IP address
to restart the DHCP service to see if it
retrieves the IP.
are you using libvirt ?
regards,
*Razique Mahroua** - **Nuage Co*
razique.mahr...@gmail.com
Le 28 nov. 2012 à 21:54, Ahmed Al-Mehdi ahmedalme...@gmail.com a écrit :
Hello,
I setup an two node OpenStack setup, running Quantum
wrote:
On 11/29/2012 07:56 AM, Ahmed Al-Mehdi wrote:
Hello,
I have a few questions related to private and external network in
Quantum. I am running into some odd behavior with networking related to my
VM instance that I am trying to resolve.
# quantum net-create --tenant-id
Hello,
If you don't mind me asking, how did you create/launch the VM instance
using the Cirros image? Did you use Horizon or command line? If command
line, can you please share the commands you used?
Thank you,
Ahmed.
On 11/27/12 1:31 AM, 이창만 cm224@samsung.com wrote:
Thanks a lot guys.
.
In your script, do you assume the user has set OS_TENANT__NAME to admin or
proj_one?
Thank you,
Ahmed.
From: Choe, Cheng-Dae white...@gmail.commailto:white...@gmail.com
Date: Tuesday, November 27, 2012 7:07 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: 이창만 cm224
Hello,
I have a mysql specific question related to my OpenStack installation. I
apologize in advance if this is not the right forum for such a question.
As user root, I created the keystone db as follows:
root@novato:~/ahmed# mysql -u root -pmysqlpass
Welcome to the MySQL monitor. Commands
,
Ahmed.
On 11/26/12 10:33 AM, Mathieu Fortin mathieu.for...@corp.ovh.com wrote:
mysql flush privileges;
On lun, 2012-11-26 at 11:15 -0600, Ahmed Al-Mehdi wrote:
Hello,
I have a mysql specific question related to my OpenStack
installation. I apologize in advance if this is not the right
On 11/26/12 2:00 PM, Alan Pevec ape...@gmail.com wrote:
As user root, I created the keystone db as follows:
root@novato:~/ahmed# mysql -u root -pmysqlpass
Welcome to the MySQL monitor. Commands end with ; or \g.
...
mysql CREATE DATABASE keystone;
Query OK, 1 row affected (0.00 sec)
-ukeystoneUser
-pkeystonePass keystone -ss -e SELECT id FROM service WHERE
type='compute';
f5919383a5da4d6a9513e1318eccbf0a
Regards,
Ahmed.
On 11/26/12 3:34 PM, Alan Pevec ape...@gmail.com wrote:
2012/11/26 Ahmed Al-Mehdi ah...@coraid.com:
mysql select * from mysql.user;
| localhost
Can you please retry issuing the command quantum floatingip-associate …
with the additional option --tenant-id 7230c184c85141b59f6a0df0843ea0d2.
-Ahmed.
On 11/26/12 9:59 PM, 이창만 cm224@samsung.com wrote:
Hello,
I am doing below guide.
From: gong yong sheng
gong...@linux.vnet.ibm.commailto:gong...@linux.vnet.ibm.com
Date: Wednesday, November 21, 2012 5:25 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack
Thank you again for you help, much appreciated. I run the needed nova-*
services on nova-compute and give it a try.
Regards,
Ahmed.
From: Vishvananda Ishaya vishvana...@gmail.commailto:vishvana...@gmail.com
Date: Tuesday, November 20, 2012 8:59 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah
Hello,
I have a question about setting up Quantum, following the steps described by
Bilel Msekni (
https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/master/OpenStack_Folsom_Install_Guide_WebVersion.rst
), which uses 3 NICs.
(Similar document/setup is also described by
, 2012 11:59 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] [nova-network] question about nova-network
Ahmed,
Are you still
Hello,
When I launch a VM instance, I see the following message regarding floating IP
in nova-network.log:
2012-11-18 15:50:29 DEBUG nova.network.manager
[req-f2b4df1f-6c29-48dc-991b-93fb5eb29d08 ce016bb05df949ebbafcc7c165359d7c
ce1e819636744dc680fa5515f6475e87] [instance:
Hello,
I am getting a RPC message timeout in nova-network.
2012-11-18 15:50:29 DEBUG nova.openstack.common.rpc.amqp [-] Making
asynchronous call on network.sonoma ... from (pid=1375) multicall
/usr/lib/python2.7/dist-packages/nova/openstack/common/rpc/amqp.py:351
2012-11-18 15:50:29 DEBUG
: Tuesday, November 20, 2012 3:52 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] Floating IP vs. Fixed IP in nova-network
, 2012 4:08 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] Floating IP vs. Fixed IP in nova-network
On Nov 20, 2012, at 4:02
re-do
the setup from scratch, which would not be too bad for me as it will take me an
hour or two.
Regards,
Ahmed.
From: Vishvananda Ishaya vishvana...@gmail.commailto:vishvana...@gmail.com
Date: Tuesday, November 20, 2012 4:59 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc
Hello,
I am running into an issue creating a VM instance (RPC message timeout in
nova-network). I have a few questions about the following entires in
nova-api.log file:
1) 2012-11-18 15:50:27 DEBUG nova.openstack.common.rpc.amqp [-] Making
asynchronous call on network ... from (pid=1688)
Hello,
I have two node OpenStack setup, one controller-node (hostname: bodega) and one
compute-node (hostname: sonoma). I am running nova-network in a single host
mode, nova-network running on controller-node only. During the creation of a
VM instance I am running into an error due to RPC
Hello,
I have a two node OpenStack setup, one control-node and one compute node, with
the services up and running on each node.
After a minute of issuing the nova-boot command on the control-node, I see
the following error message in nova-network.log file
ERROR
the necessary daemons related to nova and
other components deployed on the cloud controller node?
Thanks
Krishnaprasad Narayanan
-Original Message-
From: Ahmed Al-Mehdi [mailto:ah...@coraid.com]
Sent: Freitag, 16. November 2012 05:29
To: Narayanan, Krishnaprasad
Cc: openstack
13:56
To: Ahmed Al-Mehdi
Cc: Narayanan, Krishnaprasad; openstack@lists.launchpad.net
Subject: Re: [Openstack] Command to find out list of compute nodes
Can u check if the time is synchronized? Times on compute node and
control node should be synchronized.
On 11/16/2012 12:28 PM, Ahmed Al-Mehdi wrote
on. Would appreciate any
help / pointers. I copied the nova.conf file from the control and compute
node onto the pastebin site.
Thank you,
Ahmed.
On 11/16/12 9:28 AM, Ahmed Al-Mehdi ah...@coraid.com wrote:
Hello,
The two servers time clock is off by 2 seconds, so obvious not time
synced. I
it in the foreground so you can see any error messages
that might pop up.
Vish
On Nov 16, 2012, at 9:28 AM, Ahmed Al-Mehdi ah...@coraid.com wrote:
Hello,
The two servers time clock is off by 2 seconds, so obvious not time
synced. I will work on getting that fixed. The compute node is ahead
by
about 2
, Vishvananda Ishaya vishvana...@gmail.com wrote:
nova-compute is crashing for some reason. Try running
sudo nova-compute --config-file=/etc/nova/nova.conf
that should start it in the foreground so you can see any error messages
that might pop up.
Vish
On Nov 16, 2012, at 9:28 AM, Ahmed Al-Mehdi ah
Hello,
I would like to add, it would have been really helpful if nova-compute put
some error log message in /var/log/nova/nova-compute.log or
/var/log/syslog. Is that an enhancement worth filing against nova-compute?
Regards,
Ahmed.
On 11/16/12 1:40 PM, Ahmed Al-Mehdi ah...@coraid.com wrote
Hello,
I am following the document OpenStack Deploy and Install Guide to bring up a
OpenStack setup. Per the instructions in the document, is the controller node
also acting as the compute node. By that I mean when a VM is created, it
created on the controller node. Is that right? And
to be a compute node also?
Regards,
Ahmed.
From: Pengjun Pan panpeng...@gmail.commailto:panpeng...@gmail.com
Date: Thursday, November 15, 2012 11:58 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack
for the manual to document such a setup (as
opposed to an all-sevices-on-one-node server, plus additional compute
nodes).
Regards,
Ahmed.
On 11/15/12 11:49 AM, Anne Gentle a...@openstack.org wrote:
On Thu, Nov 15, 2012 at 1:40 PM, Ahmed Al-Mehdi ah...@coraid.com wrote:
Is your statement based
Hello,
On the compute node (IP addr : 10.176.20.4) I am seeing the following error
message in /var/log/nova/nova-compute.log:
2012-11-15 14:11:12 INFO nova.openstack.common.rpc.common [-] Reconnecting to
AMQP server on localhost:5672
2012-11-15 14:11:12 ERROR nova.openstack.common.rpc.common
with the
control node (using the rabbitmq-server)? If so, is that how the control node
knows of all the compute node that it can talk to?
Thank you,
Ahmed.
From: gong yong sheng
gong...@linux.vnet.ibm.commailto:gong...@linux.vnet.ibm.com
Date: Thursday, November 15, 2012 3:39 PM
To: Ahmed Al-Mehdi ah
[openstack-bounces+narayana=uni-mainz...@lists.launchpad.net] on behalf
of Ahmed Al-Mehdi [ah...@coraid.com]
Sent: Friday, November 16, 2012 12:19 AM
To: openstack@lists.launchpad.net
Subject: [Openstack] Command to find out list of compute nodes
Hello,
Is there a command I can issue on the control
Hello,
I resolved the issue. It was an error on my part not not correctly setting
admin_tenant_name, admin_user, admin_password correctly in api-paste.ini.
Regards,
Ahmed.
From: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Date: Tuesday, November 13, 2012 3:30 PM
To: openstack
Hello,
I have two physical servers, one server configured as as the controller node
(running all nova services, except nova-compute), and second server as a
compute node (running nova-compute). My question is how does the controller
node know there is a compute node out there, and that all
Hello,
I am trying to test out nova installation per the instruction in OpenStack
Deploy and Install Manual. (
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/configure-creds.html
). However, when I issue nova image-list, I get the prompt - password for
your new
,
exiting
2012-11-12 14:46:24 INFO nova.wsgi [-] Stopping WSGI server.
2012-11-12 14:46:24 INFO nova.wsgi [-] Stopping WSGI server.
Would highly appreciate any pointers to understanding or resolving the issue.
Regards,
Ahmed.
From: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Date
From: John Griffith
john.griff...@solidfire.commailto:john.griff...@solidfire.com
Date: Monday, November 12, 2012 7:17 PM
To: Jian Hua Geng gen...@cn.ibm.commailto:gen...@cn.ibm.com
Cc: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com,
openstack-bounces+gengjh=cn.ibm
From: John Griffith
john.griff...@solidfire.commailto:john.griff...@solidfire.com
Date: Monday, November 12, 2012 7:47 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: Jian Hua Geng gen...@cn.ibm.commailto:gen...@cn.ibm.com,
openstack-bounces+gengjh=cn.ibm
...@gmail.commailto:darren.birk...@gmail.com
Reply-To: darren.birk...@gmail.commailto:darren.birk...@gmail.com
darren.birk...@gmail.commailto:darren.birk...@gmail.com
Date: Thursday, November 8, 2012 7:19 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: John Griffith
john.griff
Hello,
I installed the nova-* services per the instruction at
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/installing-the-cloud-controller.html
All of the nova services are running, however, nova-api is not running. When
I manually start nova-api, I am getting an
...@gmail.commailto:vishvana...@gmail.com
Date: Thursday, November 8, 2012 6:34 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack
From: Vishvananda Ishaya vishvana...@gmail.commailto:vishvana...@gmail.com
Date: Thursday, November 8, 2012 8:18 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack
From: Vishvananda Ishaya vishvana...@gmail.commailto:vishvana...@gmail.com
Date: Thursday, November 8, 2012 8:18 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack
...@solidfire.commailto:john.griff...@solidfire.com
Date: Tuesday, November 6, 2012 3:53 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re
but it uses all the same settings so you
can use the same service entry. You just run cinder-api instead of
nova-api-os-volume (or disable osapi_volume if you are using nova-api), run
cinder-volume instead of nova-volume and run cinder-scheduler.
Vish
On Nov 5, 2012, at 5:26 PM, Ahmed Al-Mehdi
ah
Hello,
I just installed installed cinder, however, I am getting the following error.
root@bodega:~/ahmed/cinder# cinder create --display_name test 1
ERROR: Malformed request url (HTTP 400) (Request-ID:
req-a488154b-37f8-47e8-ae5f-8e7a73f6637b)
root@bodega:~/ahmed/cinder#
Can someone please
creation is failing?
I really appreciate your help.
Regards,
Ahmed.
From: John Griffith
john.griff...@solidfire.commailto:john.griff...@solidfire.com
Date: Tuesday, November 6, 2012 11:41 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack
Hello,
In my setup, I have two nodes, controller node (for running all services) and
one compute node (to host VMs). Both have two physical NICs, eth0 has an
assigned IP address for management of the host from outside, eth1 in
promiscuous mode for VM communication. Is the following
Hello,
I am following the steps outlined in OpenStack Install and Deploy – Ubuntu to
setup a two node configuration. I plan to use Cinder as the block storage
instead of nova-volume. I have a few question regarding sample nova.conf file
mentioned in the doc (
: Wednesday, October 31, 2012 4:49 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] [Glance] glance index failing with Request
Hello,
I followed the steps in OpenStack Install and Deploy Manual – Ubuntu to
instal glance. Section 6, sub-section Verifying the image service
installation, I tried upload the image (step 3 of the uploading steps) (
parameters require a double dash in front. append '--' to
kernel_id and ramdisk_id.
Regards,
On 2012-11-01, at 4:49 AM, Ahmed Al-Mehdi ah...@coraid.com wrote:
Hello,
I followed the steps in OpenStack Install and Deploy Manual Ubuntu to
instal glance. Section 6, sub-section Verifying
Hello,
I am following the steps in the document OpenStack Install and Deploy –Ubuntu
to setup an openstack environment. I would like to use Quantum for networking.
Is there an updated document (even in beta state) or does the same document
apply? It's just that I am not seeing a section on
in the install doc)
--kernel_id, --ramdisk_id
--kernel-id, --ramdisk-id
--os-kernel-id, --os-ramdisk-id
Regards,
Ahmed.
On 11/1/12 10:31 AM, Vishvananda Ishaya vishvana...@gmail.com wrote:
try --kernel-id not --kernel_id
Vish
On Nov 1, 2012, at 9:14 AM, Ahmed Al-Mehdi ah...@coraid.com wrote:
I
...@gmail.com
Date: Thursday, November 1, 2012 10:49 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] [OpenStack][Glance
To: George Mihaiescu george.mihaie...@q9.commailto:george.mihaie...@q9.com
Cc: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com,
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] [OpenStack
I am familiar with that document and reading through it. My question is do I
need to install/use it to get a OpenStack up and running or is it optional?
Regards,
Ahmed.
From: Ivan Kolodyazhny e...@e0ne.infomailto:e...@e0ne.info
Date: Thursday, November 1, 2012 10:35 AM
To: Ahmed Al-Mehdi ah
Do you know if nova-network will go away (eprecated) sometime in the near
future?
Regards,
Ahmed.
From: Ivan Kolodyazhny e...@e0ne.infomailto:e...@e0ne.info
Date: Thursday, November 1, 2012 2:07 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack
, November 1, 2012 3:26 PM
To: Ivan Kolodyazhny e...@e0ne.infomailto:e...@e0ne.info
Cc: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com,
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] Using
Hello,
I followed the steps in the OpenStack Install Deploy for Ubuntu manual to
install Keystone. However, when I issue the commands in section Verifying the
Identity Service Installation (
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/verifying-identity-install.html
issue prohibit me from progressing forward with the next steps
in the install document, setting up glance, nova, etc.?
Regards,
Ahmed.
From: Dolph Mathews dolph.math...@gmail.commailto:dolph.math...@gmail.com
Date: Wednesday, October 31, 2012 9:44 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah
, 2012 10:46 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net, Joseph
Heck joe.h...@nebula.commailto:joe.h...@nebula.com
Subject: Re: [Openstack
for wasting people's time. For now, I will move onto next step.
Regards,
Ahmed.
From: Joshua Harlow harlo...@yahoo-inc.commailto:harlo...@yahoo-inc.com
Date: Wednesday, October 31, 2012 1:32 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com, Dolph Mathews
dolph.math
: Wednesday, October 31, 2012 2:16 PM
To: Joshua Harlow harlo...@yahoo-inc.commailto:harlo...@yahoo-inc.com
Cc: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com, Joseph Heck
joe.h...@nebula.commailto:joe.h...@nebula.com,
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Please ignore my email below, and further testing revealed my findings below to
be false.
Regards,
Ahmed.
From: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Date: Wednesday, October 31, 2012 2:18 PM
To: Joshua Harlow harlo...@yahoo-inc.commailto:harlo...@yahoo-inc.com,
Dolph Mathews
Hi,
I am following the steps in Openstack install manual for Ubuntu. Section 6 (
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/configure-glance-files.html
) states to set the config_file parameter in glance-registry.conf file as
follows:
[paste_deploy]
# Name of the
Bug filed - https://bugs.launchpad.net/openstack-manuals/+bug/1073744
Regards,
Ahmed.
On 10/31/12 3:12 PM, Kevin L. Mitchell kevin.mitch...@rackspace.com
wrote:
On Wed, 2012-10-31 at 16:46 -0500, Ahmed Al-Mehdi wrote:
I am following the steps in Openstack install manual for Ubuntu.
Section
Hello,
I followed the steps in OpenStack Install and Deploy Manual – Ubuntu. After
following the steps to install Glance, I issued the command glance index to
test my setup. I am getting an error. Can someone please help.
root@bodega:~/ahmed/temp# glance index
ID
Hello,
The latest version of the OpenStack Install guide (Oct 10, 2012) mentions the
bash script sample_data.sh to configure keystone. I find such a script (and
the python script mentioned in earlier versions of the doc) very helpful,
especially for someone who understands the individual
keystone – manual steps,
bash script (sample_data.sh), and manual steps mentioned in Appendix B, which
are all different.
Regards,
Ahmed.
From: heckj he...@mac.commailto:he...@mac.com
Date: Tuesday, October 30, 2012 12:19 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc
Hello,
The option --version (or any variation of it) does not seem to work for
keystone, even though the man page lists --version as one of the options.
The only way I was able to find the version number is using the dpkg command on
ubuntu. Is this the only way?
# dpkg -s keystone
Package:
]
subcommand ...
keystone: error: too few arguments
root@bodega:~#
--Ahmed.
From: heckj he...@mac.commailto:he...@mac.com
Date: Friday, October 26, 2012 2:23 PM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
addresses:
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/comp
ute-create-network.html
Hope this helps.
Others on the list, feel free to correct my explanations as needed!
Thanks,
Anne
On Wed, Oct 3, 2012 at 6:46 PM, Ahmed Al-Mehdi ah...@coraid.com wrote:
Hello,
I am following
Hi Janis,
Just fyi, in the Folsom release the lines with the %…% in glance-api.conf
and glance-api-paste.ini are not present. Document instructs user to add the
three relevant lines to [filter.authtoken] section.
Regards,
Ahmed.
From: J?nis ?e??eris
Hi Janis,
Thank you very much for your response. I have some questions to your response
which are inlined below.
Regards,
Ahmed.
From: Jānis Ģeņģeris janis.genge...@gmail.commailto:janis.genge...@gmail.com
Date: Thursday, October 4, 2012 12:37 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah
Hello,
Sorry for the re-post, but I was wondering if anyone had any thoughts on the
following question.
Thank you,
Ahmed.
From: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Date: Wednesday, October 3, 2012 4:23 PM
To: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
.
From: openstack-bounces+ahmed=coraid@lists.launchpad.net
[openstack-bounces+ahmed=coraid@lists.launchpad.net] On Behalf Of Ahmed
Al-Mehdi [ah...@coraid.com]
Sent: Tuesday, October 02, 2012 4:42 PM
To: Dolph Mathews
Cc: openstack@lists.launchpad.net
Subject: Re: [Openstack] Enabling logging
Hello,
I am following the steps in OpenStack Install and Deploy – Red Hat Ubuntu
document to setup setup the controller node (
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/installing-the-cloud-controller.html
). Do I need to install nova-compute on the controller
Hello,
I am following the steps in OpenStack Install and Deploy – RedHat Ubuntu
(Folsom) to setup a Controller node. The section Configuring OpenStack
Compute (
http://docs.openstack.org/trunk/openstack-compute/install/apt/content/compute-minimum-configuration-settings.html
) gives a
,
Ahmed.
From: openstack-bounces+ahmed=coraid@lists.launchpad.net
[openstack-bounces+ahmed=coraid@lists.launchpad.net] On Behalf Of Ahmed
Al-Mehdi [ah...@coraid.com]
Sent: Tuesday, October 02, 2012 10:30 AM
To: heckj
Cc: openstack@lists.launchpad.net
. When I previously input the data
manually, I got keystone configured properly.
Regards,
Ahmed.
From: heckj [he...@mac.com]
Sent: Tuesday, October 02, 2012 10:56 AM
To: Ahmed Al-Mehdi
Cc: openstack@lists.launchpad.net
Subject: Re: [Openstack] Enabling
: The request you have made requires authentication.,
title: Not Authorized
}
}
Regards,
Ahmed.
From: Dolph Mathews [dolph.math...@gmail.com]
Sent: Tuesday, October 02, 2012 12:12 PM
To: Ahmed Al-Mehdi
Cc: heckj; openstack@lists.launchpad.net
Subject: Re
,
title: Not Authorized
}
}
Thank you,
Ahmed.
From: annegen...@justwriteclick.com [annegen...@justwriteclick.com] On Behalf
Of Anne Gentle [a...@openstack.org]
Sent: Tuesday, October 02, 2012 1:26 PM
To: Ahmed Al-Mehdi
Cc: Dolph Mathews; openstack
and Install OpenStack - Red Hat Ubuntu. I
will look into the script.
Regards,
Ahmed.
From: Dolph Mathews [dolph.math...@gmail.com]
Sent: Tuesday, October 02, 2012 2:19 PM
To: Ahmed Al-Mehdi
Cc: heckj; openstack@lists.launchpad.net
Subject: Re: [Openstack
: Tuesday, October 02, 2012 4:50 PM
To: openstack@lists.launchpad.net
Cc: heckj; Ahmed Al-Mehdi; Anne Gentle
Subject: Re: [Openstack] Enabling logging in keystone.
I find it odd that the document describes two approaches for configuring
keystone -- one being a relatively undocumented, scripted
Hello,
Does anybody know when will the distress, specifically Ubuntu, have packages
for the OpenStack Folsom release. Is this effort done indecently of OpenStack
by Ubuntu and the release date will be mentioned on Ubuntu's website?
Regards,
Ahmed.
:12 AM
To: Ahmed Al-Mehdi ah...@coraid.commailto:ah...@coraid.com
Cc: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] When will the distro (specifically Ubuntu) have
package for Folsom
Hello,
I am attempting to do a fresh install of OpenStack / Folsom release on Ubuntu
12.04 following the doc - Install and Deploy Manual – Red Hat Ubuntu (Folsom
version). I added a new file to /etc/apt/sources.list.d, folsom.list:
root@bodega:/etc/apt/sources.list.d# cat folsom.list
deb
1 - 100 of 111 matches
Mail list logo
