On Sun, 2 Sep 2007, Francis Giannaros wrote:
On 9/2/07, Bernhard Walle [EMAIL PROTECTED] wrote:
* Alberto Passalacqua [EMAIL PROTECTED] [2007-09-02 17:52]:
during a discussion on IRC it emerged that GNOME still has a very high
number of blockers and critical bugs.
GNOME will be
I suppose for the quality of GNOME it would be more helpful if people
would report issues upstream. At least if the perception is correct
that bugs in openSUSE GNOME are only fixed by pulling new releases
from upstream.
That's ok, but it should have been clarified at the beginning of the
On Mon, 2007-09-03 at 11:47 +0200, Alberto Passalacqua wrote:
That's ok, but it should have been clarified at the beginning of the
development stage, I think. Now, 17 days before the release, it is
probably too late to get them fixed for 2.20, which will be included in
openSUSE 10.3.
On Mon, 3 Sep 2007, Alberto Passalacqua wrote:
I suppose for the quality of GNOME it would be more helpful if people
would report issues upstream. At least if the perception is correct
that bugs in openSUSE GNOME are only fixed by pulling new releases
from upstream.
That's ok, but it
On Sunday 02 September 2007 16:15, Wolfgang Woehl wrote:
...
Be aware that abandoning mount by device path was forced by increasing
number of devices that can be mounted in different order on each boot
which results in different path. All SATA and USB devices are prone to
that.
Internal
On Mon, 3 Sep 2007, Richard Guenther wrote:
On Mon, 3 Sep 2007, Alberto Passalacqua wrote:
I suppose for the quality of GNOME it would be more helpful if people
would report issues upstream. At least if the perception is correct
that bugs in openSUSE GNOME are only fixed by pulling new
Hi,
On Monday, September 03, 2007 at 06:58:14, Boyd Lynn Gerber wrote:
From what I see in bugzilla there are too many bugs to really release
on schedule. I think the release needs to be postponded.
If we would always draw in our horns because of this we would still be
in the process of
Henne Vogelsang wrote:
On Monday, September 03, 2007 at 06:58:14, Boyd Lynn Gerber wrote:
From what I see in bugzilla there are too many bugs to really release
on schedule. I think the release needs to be postponded.
If we would always draw in our horns because of this we would still be
in
On Sunday 02 September 2007 10:52:54 am Alberto Passalacqua wrote:
Hello everyone,
during a discussion on IRC it emerged that GNOME still has a very high
number of blockers and critical bugs.
As it can be seen here:
The numbers seems to be lower today.
This looks like an other 10.1 fiasco.
I don't think so. As Henne said, we are still in beta stage. That's why
I asked how fixes are progressing.
Regards,
Alberto
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
Hey Group;
The KDE user SuSE Updater seems to be broken. Every rime KDE comes up
it does also. It checks online and then shows a circled ?.
Click on it and up comes a error message stating openSUSE Updater -
Unable to check if updates are available. Beside it never works and
suggests -
Right. And after all, this is only GNOME and everybody reasonable uses
KDE anyways (because it has much less bugs, for example) :P
I don't agree. We had already a buggy GNOME, to the limit of being
unusable, on 10.2. I would like not to see that again in 10.3.
To be serious, I'm working
And for instance:
301716Cri P5 open NEW Pidgin segfaults when sending AIM
message to yourself.
Taking the type of application is it really critical?
Is that mean that critical is used for any crash?
Funny, indeed.
The reporter is Bryan Perry @ Novell, so it is
Donn Washburn wrote:
Hey Group;
The KDE user SuSE Updater seems to be broken. Every rime KDE comes
up it does also. It checks online and then shows a circled ?.
Click on it and up comes a error message stating openSUSE Updater -
Unable to check if updates are available. Beside it never
Hello
In the /etc/hosts file on opensuse 10.2, I have the Full-Qualified-Hostname
on my
machine in like this:
# IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.2 my_hostname.my_dns my_hostname
This was not the case with 10.3 after I installed it - so I tried to add it
(for
On Monday 03 September 2007 13:06, Alberto Passalacqua wrote:
And for instance:
301716Cri P5 open NEW Pidgin segfaults when sending
AIM message to yourself.
Taking the type of application is it really critical?
Is that mean that critical is used for any crash?
On Sun, 2 Sep 2007, Florin Samareanu wrote:
Is this happening to anyone here with a current -FACTORY?
[EMAIL PROTECTED]:~ ls -l /dev/*null*
-rw-rw-rw- 1 root root0 2007-09-02 22:45 /dev/null
-rwxrwxrwx 1 root root 2173 2007-09-02 22:24 /dev/null.2007-09-02.0
lrwxrwxrwx 1 root root 17
On Mon, Sep 03, 2007 at 03:03:13PM -0400, Richard C Creighton wrote:
Donn Washburn wrote:
Hey Group;
The KDE user SuSE Updater seems to be broken. Every rime KDE comes
up it does also. It checks online and then shows a circled ?.
Click on it and up comes a error message stating
2007/9/2, Florin Samareanu [EMAIL PROTECTED]:
Is this happening to anyone here with a current -FACTORY?
[EMAIL PROTECTED]:~ ls -l /dev/*null*
-rw-rw-rw- 1 root root0 2007-09-02 22:45 /dev/null
-rwxrwxrwx 1 root root 2173 2007-09-02 22:24 /dev/null.2007-09-02.0
lrwxrwxrwx 1 root root 17
2007/9/3, James PEARSON [EMAIL PROTECTED]:
Hello
In the /etc/hosts file on opensuse 10.2, I have the
Full-Qualified-Hostname on my
machine in like this:
# IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.2 my_hostname.my_dns my_hostname
This was not the case with 10.3 after
The last days I got more than 5 crashes with the rpmdb, and must
rebuild it with rpm --rebuilddb, and in one case, after rebuilding,
in the first case I woluld to install a rpm package.
The last case was installing a package compiled in the system and
created by checkinstall:
rpmdb: PANIC:
Hi,there,
I installed opensuse10.3beta2 to a dmraid (raid1)function machine,
At the end of installation, the yast can not create initrd and
install bootloader.
Because the creating initrd missed 70-kpartx.rule file, the
mkinitrd is failed.
Can we fix the bug in the beta3?
Hi Srinivasa,
Thank you for your respond.
I use OpenSuSE10.2 . Evolution ver.2.8.2 Groupware suite.
On Mon, 03 Sep 2007 09:54:05 +0530
Srinivasa Ragavan [EMAIL PROTECTED] wrote:
Hi,
On Mon, 2007-09-03 at 02:28 +0700, Patrik Hasibuan wrote:
Dear my friends...
I use mandriva and
Hi Patrik,
On Mon, 2007-09-03 at 13:05 +0700, Patrik Hasibuan wrote:
Hi Srinivasa,
Thank you for your respond.
I use OpenSuSE10.2 . Evolution ver.2.8.2 Groupware suite.
There is an update to Evolution (Evolution-data-server rpm) for OpenSUSE
10.2 which fixes the problem.
On Fri, 2007-08-24 at 11:15 +0700, Hans Linux wrote:
anyone can tell me how to apply the selected emerald theme to gnome
panel? the theme only applies on window.
emerald themes can't be applied to gnome menu (unless maybe for the
shadows), they are meant to be window decoration themes not
On Mon, 2007-09-03 at 02:28 +0700, Patrik Hasibuan wrote:
Dear my friends...
I use mandriva and suse mostly for working. I have a problem on my SuSE but
not on mandrive about my ximian-evolution.
I checked the remember this password for receiving and sending an email.
But next time if
Richard Atcheson wrote:
When asked about getting a non defective board they told
him to take it or leave it or he could purchase another board.
He did, and gave the ASUS to someother poor fool. No ASUS boards in either
of
our computer rooms again.
I fully agree that ASUS and
Hi,
I am in desperate need of Asterisk 1.4 and freePBX 2.3. Unfortunately, freePBX
requires Apache to be run as user/group asterisk, what makes current server
incompatible with any other web applications.
I'm wondering: where is the problem in running as user/group asterik?
After all it's
Hi list,
- in PAM there's a thing called mk_homedir (I think). It works when you're
doing AD integrations, i.e. it'll create a users homedir if the user exists
in the AD but yet hasn't logged into the Linux box.
- What if the user comes in (for the first time) though SSH, authenticates
Hi,
- What if the user comes in (for the first time) though SSH, authenticates
against the AD, and then wants a home-dir to be created. Which PAM file
(in /etc/pam.d) should I modify? And what should I write in it?
Here is what I use on my linux boxes with ssh configured to
authenticate
Hi,
I (still) have the same problem. I posted it to the german suse list
some weeks and I ain't got no reply. But initiating the connection from
the computer fit my needs, so I didnot spend much time to find a way to
get the normal behaviour. So if you find a solution I am interested as well.
Eberhard Roloff wrote:
Richard Atcheson wrote:
When asked about getting a non defective board they told
him to take it or leave it or he could purchase another board.
He did, and gave the ASUS to someother poor fool. No ASUS boards in either of
our computer rooms again.
I fully agree
Art Fore schrieb:
Mouse is a Dell, about 3 years old, so that does not really make sense.
Will change it to a PS2 mouse though.
Art
Hmm, strange because this is in your xorg.conf:
Option Device /dev/input/mice
Option Name Logitech Optical USB Mouse
Tom
--
To
Dňa Friday 31 August 2007 22:39:29 Fernando Costa ste napísal:
Hi...
I'm updating some programs (compiz, gwenview, etc.. ) with yast... but
the process is freezed... is about half hour that is freezed 100%
percent completed) and don't know what would happen if I shut down or
kill the
hi list
i have an FC4 machine with mysqld installed with the default configuration,
Say Box A, and i have another FC4 machine which i want to use as a client,
say Box B
when i start mysqld service on Box A and i issue the following command on
shell
#mysql -u root -p
it simply connects with
On Mon, 2007-09-03 at 10:08 +0200, Thomas Meindl wrote:
Art Fore schrieb:
Mouse is a Dell, about 3 years old, so that does not really make sense.
Will change it to a PS2 mouse though.
Art
Hmm, strange because this is in your xorg.conf:
Option Device /dev/input/mice
azeem ahmad wrote:
hi list
i have an FC4 machine with mysqld installed with the default
configuration, Say Box A, and i have another FC4 machine which i want
to use as a client, say Box B
when i start mysqld service on Box A and i issue the following command
on shell
#mysql -u root -p
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Adolph Weidanz wrote:
Hey all...
This might be one of those that just can't be done...
Ok... I have a DLink 451 (HSDPA hotspot wireless router) that I have
setup as 192.168.1.1 w/ DHCP off (all the computers have set IPs). I
also have a
On Monday 03 September 2007 03:08, Thomas Meindl wrote:
Art Fore schrieb:
Mouse is a Dell, about 3 years old, so that does not really make sense.
Will change it to a PS2 mouse though.
Art
Hmm, strange because this is in your xorg.conf:
Option Device /dev/input/mice
On Monday 03 September 2007 03:42, azeem ahmad wrote:
hi list
i have an FC4 machine with mysqld installed with the default configuration,
Say Box A, and i have another FC4 machine which i want to use as a
client, say Box B
...
Azeem
The idea to crosspost fedora technical question on opensuse
Matthew Stringer wrote:
Eberhard Roloff wrote:
I fully agree that ASUS and (feel free to insert any other brand
name here) in fact do supply faulty hardware and underdone Firmware and
BIOS editions.
I should have mentioned that I also buy ultraconservatively. I.E. I
never buy the
Hi all,
I am running openSUSE 10.2, yesterday while installing some
new updates with yast2 the X-system crashed (probably due to some
other program, xine) and together the yast2 installation.
Next time I tried to boot my pc I got the following message:
/etc/init.d/boot.d/S08boot.localfs: line
On Sep 2 2007 22:30, Darragh wrote:
Possibly a stupid question, but where are these packages. Yast hasn't found
them and a quick search hasn't turned up anything either.
I'll keep looking but if you could point me in the right direction I'd
appreciate it.
lbuild can be found in lnussel's
I use SLED10 SP1 with gnome. How can i go from xgl to compiz? A quick
rpm -qa compiz produces compiz-0.4.0-0.21 so it looks to be installed.
Compiz gnome is also installed. Can someone walk me through changing
from xgl to compiz? Thanks in advance
Chris
--
To unsubscribe, e-mail: [EMAIL
On Monday 03 September 2007 07:10:40 am Chris Arnold wrote:
I use SLED10 SP1 with gnome. How can i go from xgl to compiz? A quick
rpm -qa compiz produces compiz-0.4.0-0.21 so it looks to be installed.
Compiz gnome is also installed. Can someone walk me through changing
from xgl to compiz?
Chris Arnold [EMAIL PROTECTED] writes:
I use SLED10 SP1 with gnome. How can i go from xgl to compiz? A quick
rpm -qa compiz produces compiz-0.4.0-0.21 so it looks to be installed.
Compiz gnome is also installed. Can someone walk me through changing
from xgl to compiz? Thanks in advance
XGL
On Sun, 2007-09-02 at 11:53 -0500, Rajko M. wrote:
On Friday 31 August 2007 10:37, Christian Zoz wrote:
On Thu, Aug 30, Frank Bonnet wrote:
I've found some docs about bonding but it is written that it is an
obsolete page !
What is the good doc page URL for opensuse 10.2 ?
man
Mandag 03 september 2007 09:21 skrev Gaël Lams:
Hi,
- What if the user comes in (for the first time) though SSH,
authenticates against the AD, and then wants a home-dir to be created.
Which PAM file (in /etc/pam.d) should I modify? And what should I write
in it?
Here is what I use on
How do,
On Mon, 2007-09-03 at 12:00 +0530, Srinivasa Ragavan wrote:
Hi Patrik,
On Mon, 2007-09-03 at 13:05 +0700, Patrik Hasibuan wrote:
Hi Srinivasa,
Thank you for your respond.
I use OpenSuSE10.2 . Evolution ver.2.8.2 Groupware suite.
There is an update to Evolution
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
I use SLED10 SP1 with gnome. How can i go from xgl to compiz? A quick
rpm -qa compiz produces compiz-0.4.0-0.21 so it looks to be installed.
Compiz gnome is also installed. Can someone walk me through changing
from xgl to compiz? Thanks in
On Sun, 26 Aug 2007 09:43:42 +0200 (CEST)
Jan Engelhardt [EMAIL PROTECTED] wrote:
On Aug 26 2007 01:37, Michael S. Dunsavage wrote:
How many cpu's can linux support?
^
$ cat /proc/cpuinfo | grep ^processor | tail -n1
processor : 511
That is the largest machine
CyberOrg wrote:
In gnome-control-center - desktop-effects - enable effects
Or if you are certain that your graphics is fully supported(most
intel) run the following at run level 3 as root:
gnome-xgl-switch --disable-xgl
I am using desktop effects already without any problems (with 3d
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
So, if i understand this right, i can use
compiz themes like emerald now with xgl/compiz?
Not on SLED 10, but on 10.2 and 10.3 yes.
Ciao
-J
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Adolph Sharon Weidanz wrote:
G T Smith wrote:
Adolph Weidanz wrote:
Hey all...
Any ideas be appreciated...
What I am not clear about is whether the other machines have wi-fi or
cable networking ...
The other machines are all wi-fi, the
You are extremely lucky :)
Because I am the author of VirtualBox for openSUSE guide:
http://forgeftp.novell.com/lfl/.html/virtualbox.html
--
-Alexey Eremenko Technologov
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Can you recommend what should be the partition size for holding only a
subversion repository. I need this for my personal projects, which in general
are quite small.
--
Bogdan
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Andreas Jaeger wrote:
XGL and compiz are both needed together, xgl as the X server, compiz as
windowmanager. I guess you ask for additional compiz modules which you
can get from our build service,
I am looking for those modules now. Where on the buildservice are they?
Thanks
Chris
--
Cristea Bogdan wrote:
Can you recommend what should be the partition size for holding only a
subversion repository. I need this for my personal projects, which in general
are quite small.
If you don't know in advance how many space you need it might be
interesting to use LVM.
That way you
On Sunday 02 September 2007 10:02:49 pm Hans Linux wrote:
dear all
i m having problem with my VirtualBox on my opensuse 102. The error is :
VirtualBox kernel driver not installed. The vboxdrv kernel module was
either not loaded or /dev/vboxdrv was not created for some reason.
...
I try the
Greetings all. I'm preparing to install OpenSuse 10.2 and have been
browsing the web reading various installation instructions (just to make
sure I don't go an overwrite my MBR or something else stupid) and came
across the following...
Quote -
You will see now a summary of the Installation
On SLED10 SP1 with gnome. Yep, i am back trying to get skype installed :)
The software requirements to install skype 1.4 are:
* Qt 4.2.1+
* D-Bus 1.0.0
* libsigc++ 2.0.2
* libasound2 1.0.12
The only one of these requirements i have is libsigc++. I have QT3
installed, D-Bus 0.60
Chris Arnold wrote:
On SLED10 SP1 with gnome. Yep, i am back trying to get skype installed :)
The software requirements to install skype 1.4 are:
* Qt 4.2.1+
* D-Bus 1.0.0
* libsigc++ 2.0.2
* libasound2 1.0.12
The only one of these requirements i have is libsigc++. I have
On Sep 3 2007 08:29, James Tremblay wrote:
On Thu, Aug 30, Frank Bonnet wrote:
I've found some docs about bonding but it is written that it is an
obsolete page !
What is the good doc page URL for opensuse 10.2 ?
man ifcfg-bonding
Hi Christian,
If Frank prefer URL, in
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
I get this on rpm -Uvh filename.rpm:
error: Failed dependencies:
libqt4-x11 = 4.2 is needed by skype-1.4.0.99-suse.i586
libQtCore.so.4 is needed by skype-1.4.0.99-suse.i586
libQtDBus.so.4 is needed by
Mark Goldstein wrote:
You can also download statically linked skype 1.4 (in case you just
want to try this beta version).
Where do i download the statically linked skype? I used install
software and typed in skype and a package was returned but when i
clicked it and said install, i got
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
Where do i download the statically linked skype? I used install
software and typed in skype and a package was returned but when i
clicked it and said install, i got
Unresolved dependencies:
There are no installable providers of skype
Marking
Mark Goldstein wrote:
I did not use yast for this purpose, but just went to skype site. The
url is http://www.skype.com/go/getskype-linux-static. Actually after
reading about some issues with this version, I did not want to replace
previous one. This statically linked version is tar file that
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
Mark Goldstein wrote:
Yea, i could use that but i would like to get it installed. Any ideas on
what packages i would need?
No idea, sorry. This is what RPM REQUIRENAME specifies:
libqt4-x11 = 4.2
rpmlib(PayloadFilesHavePrefix) = 4.0-1
On 9/3/07, Chris Arnold [EMAIL PROTECTED] wrote:
Mark Goldstein wrote:
Yea, i could use that but i would like to get it installed. Any ideas on
what packages i would need?
No idea, sorry. This is what RPM REQUIRENAME specifies:
libqt4-x11 = 4.2
rpmlib(PayloadFilesHavePrefix) = 4.0-1
Chris Arnold wrote:
On SLED10 SP1 with gnome. Yep, i am back trying to get skype installed :)
The software requirements to install skype 1.4 are:
* Qt 4.2.1+
* D-Bus 1.0.0
* libsigc++ 2.0.2
* libasound2 1.0.12
The only one of these requirements i have is libsigc++. I have
On Monday 03 September 2007 11:48, Rajko M. wrote:
I installed it using opensuse10.2 repo. any idea what should i do?
Besides Alexey's article, you may try as root to load:
modprobe vboxdrv
and see if it can start.
No, it can't.
Because there is no vboxdrv in rpm, not in
Dear Friends,
I have started with OpenSuSE some days ago, and I have many questions
about this distribution, but I have an great challenge to complete in
a few time:
I would like to create an RPM's repositoriy with OpenSuSE, to update
my clients, they will connect on my repos an get my versions
On Mon, 2007-09-03 at 20:02 +0200, Jan Engelhardt wrote:
On Sep 3 2007 08:29, James Tremblay wrote:
On Thu, Aug 30, Frank Bonnet wrote:
I've found some docs about bonding but it is written that it is an
obsolete page !
What is the good doc page URL for opensuse 10.2 ?
man
Hi .
I am trying to compile gsat part of the Predict package all goes fine untill
Making all in src
make[2]: Entering directory
`/home/downloads/predict-2.2.3/clients/gsat-1.1.0/src'
gcc -g -O2 -Wall -o gsat main.o support.o interface.o callbacks.o comms.o
plugins.o db.o
prefs.o
I have again the same problem: my desktop is almost white, I can
see text but the background picture and all icons are gone. I have
created another account, all seemed normal, I have started to transfer
files into my new account, but after several hours this new account
has the same problems as
I use gnome and xgl/compiz with desktop effects active and working. Over
at gnome-look, i have some themes i want to install and they are
.emerald files. How do i install and use these themes?
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On Monday 03 September 2007 10:31, G T Smith wrote:
Adolph Sharon Weidanz wrote:
G T Smith wrote:
Adolph Weidanz wrote:
Hey all...
Any ideas be appreciated...
What I am not clear about is whether the other machines have wi-fi or
cable networking ...
The other machines are all
Hi,
I am having problems with statically linked openmotif applications core
dumping on opensuse 10.2. These applications worked fine on suse 9.3.
When linked dynamically these applications seem to work fine. I get no
compile or link errors. If I try to get a backtrace from the core file
using gdb
On Monday 03 September 2007 20:40, Hans Linux wrote:
You r right! I reinstalled virtualbox using its binary and having
windows xp running as guest now. Great software, much better than vmware
which is not stable and slow :P
one thing remain is USB. According to Alexey opensuse guide, we have
RTF wrote:
Greetings all. I'm preparing to install OpenSuse 10.2 and have been
browsing the web reading various installation instructions (just to
make sure I don't go an overwrite my MBR or something else stupid) and
came across the following...
Quote -
You will see now a summary of the
K.R. Foley escribió:
Hi,
I am having problems with statically linked openmotif applications core
dumping on opensuse 10.2.
good luck, please just link them dynamically.
http://people.redhat.com/drepper/no_static_linking.html
--
You don't have to burn books to destroy a culture. Just
On Monday 03 September 2007, Chris Arnold wrote:
I hate to do this on this list butI have a icon set that i want
to install/use. Where do i put the files/folders to use these new
icons and where do i activate them? I want to try the glass-icons
from
looking to set up a dual raid system on a ASUS M2N32 does any one have
issues on this mother board ?
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On Sun, 2 Sep 2007 22:33:07 +0200, Anders Johansson wrote:
On AMD, I believe it is revision D or later,
Easier to remember: it must be a socket AM2 cpu.
Philipp
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On 9/4/07, Chris Arnold [EMAIL PROTECTED] wrote:
I use gnome and xgl/compiz with desktop effects active and working. Over
at gnome-look, i have some themes i want to install and they are
.emerald files. How do i install and use these themes?
If you are using compiz 0.5.4, install
On Sunday 02 September 2007 18:00:21 wrote Marcus Rueckert:
On 2007-09-02 16:22:58 +0200, Stephan Kulow wrote:
Am Friday 24 August 2007 schrieb Vladimir Nadvornik:
On středa 16 květen 2007, Stephan Kulow wrote:
It's pretty simple: BuildRequire fdupes and then use %fdupes
Vladimir Nadvornik wrote:
On pondělí 03 září 2007, Adrian Schröter wrote:
On Sunday 02 September 2007 18:00:21 wrote Marcus Rueckert:
On 2007-09-02 16:22:58 +0200, Stephan Kulow wrote:
Am Friday 24 August 2007 schrieb Vladimir Nadvornik:
On středa 16 květen 2007, Stephan Kulow wrote:
Do you
On Aug 31, 07 15:04:30 +0200, Dirk Mueller wrote:
On Friday, 31. August 2007, Philipp Thomas wrote:
How about this (untestet):
a) buildrequires licenses missing
b) the %doc macro runs after postinstall scripts, so one still has to update
the %doc macro specs
an easier fix would be to
On Mon, 3 Sep 2007, Juergen Weigert wrote:
On Aug 31, 07 15:04:30 +0200, Dirk Mueller wrote:
On Friday, 31. August 2007, Philipp Thomas wrote:
How about this (untestet):
a) buildrequires licenses missing
b) the %doc macro runs after postinstall scripts, so one still has to
On Mon, Sep 03, 2007 at 01:05:56PM +0200, Lukas Ocilka wrote:
Libzypp supports --nodeps as a fallback solution for installing RPMs.
First, it, of course, tries to install an RPM in a normal way, then
libzypp tries that with --nodeps automatically.
Huh, isn't that already fixed? libzypp must
On Monday, 3. September 2007, Juergen Weigert wrote:
Does anybody know if the licenses package had a space
saving effect on the media?
Well, the GPL roughly takes 3kb of space per rpm on the media. out of a
default KDE installation, exactly 256 packages ship a copy of GPL, eating
roughly
On Monday, 3. September 2007, Lukas Ocilka wrote:
Libzypp supports --nodeps as a fallback solution for installing RPMs.
First, it, of course, tries to install an RPM in a normal way, then
libzypp tries that with --nodeps automatically.
Thats not a reason. we rely on package dependencies
On Mon, 3 Sep 2007, Dirk Mueller wrote:
On Monday, 3. September 2007, Juergen Weigert wrote:
Does anybody know if the licenses package had a space
saving effect on the media?
Well, the GPL roughly takes 3kb of space per rpm on the media. out of a
default KDE installation, exactly 256
Hi,
On Mon, 3 Sep 2007, Marcus Rueckert wrote:
Does rpm fail to install the package or does it create a full copy of
the file on the other partition ?
If it is the later, I think hardlinks are okay to use ..
it fails horribly.
taking into account the comment from bwalle about
On Sat, Sep 01, 2007 at 09:18:03PM -0400, Cristian Rodriguez wrote:
Paul Elliott escribió:
%{?suse_update_config:BuildRequires:autoconf automake libtool}
%{?suse_update_libdir:%{suse_update_libdir}}
%{?suse_update_config:%{suse_update_config -f}}
If you really need what those macros
Marcus Rueckert escribió:
and he declined to fix
that in rpm.
Sure, because RPM is not broken, what seems to be broken is the idea of
using this %fdupes thingy, as AFAICS it will cause more harm than good.
--
You don't have to burn books to destroy a culture. Just get people to
stop reading
On Thursday 30 August 2007 05:22, Christopher Cook wrote:
Hi,
Just a suggestion, http://www.opensuse.org/ got a new layout, which
looks a lot nicer than the old one, and the Get It link there looks
very nice and professional, but shouldn't the wiki site get a new
layout as well?
as Rajko
Hi,
a short note on the status of the new skin for the wiki:
- the new skin is currently tested on staging. Staging has some real
data from the wiki (half a year old), so we can test the skin in
almost real life. This has revealed some minor CSS/Template issues I
am currently fixing
Frank Sundermeyer wrote:
Agreed?
yes :-)
jdd
--
http://www.dodin.net
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Hi,
at news.opensuse.org the leftbar lists categories above calendar. So on many
screens the calendar section with the events is below the fold.
I think exchanging the two would be useful for the mayority of visitors of
news.opensuse.org. Yes, I think showing the calendar/events more
1 - 100 of 102 matches
Mail list logo