I have an HP Compaq nc6220 laptop display resolution 1400x1050. Intel GMA900
graphics. I praised SuSE always in previous releases because it was the only
distribution that correctly supported the resolution out of the box with no
hacks needed. Now in 10.3 it broke. To make the resolution work
Hello,
A recent zypper dup removed the gpg2 package from my system (I have no
idea why). When I later tried to update again I ended up with the following
error:
Checking whether to refresh metadata for factory
Downloading:
Am Samstag 22 Dezember 2007 schrieb Joerg Mayer:
The error message isn't really helpful. Should I open a bug requesting
a less misleading error message like gpg not found - couldn't verify
key?
I'd say, that depends. If rpm -V zypper libzypp is silent, then it's a bug in
the package. But if
ppc appears to be stuck *again*, sigh.
I wouldn't be so picky about this, except that at the moment ppc
factory is uninstallable
because of bug 346872. This is *technically* marked as fixed in
libzypp-4.1.6, which
was committed on 12/17. But as yet libzypp-4.1.6 hasn't made it to
any part
Am Samstag 22 Dezember 2007 schrieb Toni Harbaugh-Blackford:
ppc appears to be stuck *again*, sigh.
I wouldn't be so picky about this, except that at the moment ppc
factory is uninstallable
because of bug 346872. This is *technically* marked as fixed in
Don't worry. If it has been synced
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
JJB wrote:
Is there something like /etc/init.d/gui stop?
Nope, but you can do it two ways:
1. Edit /etc/inittab and change the default init to 3, or
2. Start yast2 change in System/sysconfig-Editor/Desktop/Display
manager/DISPLAYMANAGER the entry
I installed Xp in vmware, before having the usb compatible virtualbox :-(
I read in the vb manual that it can open the vmware vmdk files, but
when I try this it say no bootable system found
is there a way to use vmware disks with vbox?
thanks
jdd
--
http://www.dodin.net
--
To unsubscribe,
Patrick Shanahan wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Donald D Henson [EMAIL PROTECTED] [12-21-07 18:22]:
Dave Howorth wrote:
Another suggestion. Start YaST. Go to system, sysconfig editor, system,
cron and set SEND_MAIL_ON_NO_ERROR to yes. Report back what gets output
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ken Schneider wrote:
Kaare Rasmussen pecked at the keyboard and wrote:
Try this: http://www.blizzplanet.com/content/459/ There are links to
instructions, I did not check this out fully. Google is your friend, I
I did try something similar last
On Saturday 22 December 2007 10:53:48 G T Smith wrote:
Ken Schneider wrote:
Kaare Rasmussen pecked at the keyboard and wrote:
Try this: http://www.blizzplanet.com/content/459/ There are links to
instructions, I did not check this out fully. Google is your friend, I
I did try something
HEllo i am desperate and i dont kow how to solve my problem.
I have install the SLES 10, i have upodate online and i have install the
SP1.
I want to configure one email server using postfix, sasl, cyrus and the
autentication againts the ldap (localhot)
I have configure into the dns server (in
On Saturday 22 December 2007 11:46:06 Carlos wrote:
1. problem:
i am using the yast for adding users and when y add one ussers and i add it
email adress using the yast pluging for editing the email date from user ,
or if i change the password whe i finalize appears this error into the
Hi,
This has been bothering me for a long time as I am battling to
understand the usage of software repositories. I haven't been able to
find a reference in the fine manual of 10.2 that describes this , hence
my question.
I realise that the repositories are used for updates but why has some of
i only make these changes using Yast, only yast
what can i solve this problem?
Can you help me?
thanks
- Original Message -
From: Anders Johansson [EMAIL PROTECTED]
To: opensuse@opensuse.org
Sent: Saturday, December 22, 2007 12:36 PM
Subject: Re: [opensuse] Problen with SLES + postfix +
On Saturday 22 December 2007 12:36:21 Anders Johansson wrote:
Are you saying YaST itself is making this connection? That's new. YaST
should be storing all its info in the LDAP server. I don't think I've ever
seen YaST itself make an imap connection
My mistake. I just checked, and YaST does do
Anders Johansson wrote:
I think totem uses gstreamer, so you probably need the fluendo codec for
mpeg.
You can find it at packman
I have the gst-fluendo-mp3 rpm installed and when i type in fluendo in
software management (which i have packman as a software repo), gstreamer
and flumotion
On Saturday 22 December 2007 12:57:00 Carlos wrote:
i only make these changes using Yast, only yast
what can i solve this problem?
I'd need to set up a system with multiple domains in order to test your second
problem. The third, as I said, isn't a problem
For the first problem, either add
On Saturday 22 December 2007 12:57:00 Carlos wrote:
i only make these changes using Yast, only yast
what can i solve this problem?
I'd need to set up a system with multiple domains in order to test your second
problem. The third, as I said, isn't a problem
For the first problem, either add
Hello
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am using Main Repository OSS and non-OSS, nvidia, opensuse edu,
buildservice mozilla and opensuse 10.3 updates.
What do you recommend ?
Kind
Hylton Conacher (ZR1HPC) wrote:
opensuse.mirror.ac.za/opensuse/distribution/10.2/repo/non-oss/
ftp.skynet.be/pub/ftp.opensuse.org/opensuse/distribution/10.2/repo/oss/
these two are static repository. Usually they don't change after the
initial release. Very rarely there is an update if the
Rodney Baker wrote:
Chris,
You can install compiz-fusion using one-click without first uninstalling
compiz. Yast will take care of dependicies, obsoletes etc. I have done this
successfully on 2 systems.
I have both KDE and Gnome desktops installed (although I generally use KDE)
so
I
Hi,
Version updates for released products are extremely rare. Essentially, they
only happen when there is a serious bug or security problem, and a backport
of the fix is too complicated
So yes, if you really want updated versions of the software, you need to
either update to the latest suse
aledr wrote:
There is World of Warcraft 2 and other games in wine-doors... You can
give a try...
2007/12/21, Kai Ponte [EMAIL PROTECTED]:
On Thursday 20 December 2007 13:35, Kaare Rasmussen wrote:
Hi
Can anybody help me make my kids happy?
I would really like to run World of Warcraft
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Saturday 2007-12-22 at 02:34 -0700, Donald D Henson wrote:
Hmmm. Something magic must have happened. The cron job ran and the
backup was updated. The only thing I changed was to set
SEND_MAIL_ON_NO_ERROR to Yes. (By the way, where does that
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Saturday 2007-12-22 at 08:49 +0100, Cristea Bogdan wrote:
I have an external USB modem and trying to get this working on linux.
I have set up through yast the modem parameters related to Internet
provider, but I am not able to communicate
jdd pecked at the keyboard and wrote:
I installed Xp in vmware, before having the usb compatible virtualbox :-(
I read in the vb manual that it can open the vmware vmdk files, but when
I try this it say no bootable system found
is there a way to use vmware disks with vbox?
thanks
jdd
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Alpine 1.00 has been finally released. It is the new version of the mail
client Pine, with an apache license. It is, as Pine, a text mode MUA.
Now it also has a web based user agent.
More info:
http://www.washington.edu/alpine/
There is
Hi all,
I fitted a new Nvidia 6200geforce (AGP) graphics card a few days ago, and
I saw this intermittent (maybe once a week) fault for the 3rd time today.
http://www.users.zetnet.co.uk/phwilliamson/drawing2.png
I was running openSuse 10.3 at the time, but I have also seen the same fault
in
On Dec 22, 2007 9:43 AM, Hylton Conacher (ZR1HPC) [EMAIL PROTECTED] wrote:
Hi,
This has been bothering me for a long time as I am battling to
understand the usage of software repositories. I haven't been able to
find a reference in the fine manual of 10.2 that describes this , hence
my
On Saturday 22 December 2007 23:08:36 Chris Arnold wrote:
Rodney Baker wrote:
Chris,
You can install compiz-fusion using one-click without first uninstalling
compiz. Yast will take care of dependicies, obsoletes etc. I have done
this successfully on 2 systems.
I have both KDE and
Carlos E. R. wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-12-20 at 09:22 -1000, [EMAIL PROTECTED] wrote:
Even if one nices and ionices beagle, there still is the matter of
swap space
getting filled. Usually it is when that happens when ugly thoughts
against
the
Hylton Conacher (ZR1HPC) wrote:
Aaron Kulkis wrote:
Hylton Conacher (ZR1HPC) wrote:
Hi,
I am currently in the market for a flash card and floppy disk reader.
Yes, floppy disks, the 3.5 ones.
The reason I would like a reader for floppy disks as I have in excess of
100 disks that contain
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Donald D Henson [EMAIL PROTECTED] [12-22-07 04:40]:
Hmmm. Something magic must have happened. The cron job ran and the
backup was updated. The only thing I changed was to set
SEND_MAIL_ON_NO_ERROR to Yes. (By the way, where does that mail get
[EMAIL PROTECTED] wrote:
On Wednesday 19 December 2007 01:02:56 pm Aaron Kulkis wrote:
ah... ionice seems to be a new invention.
I'll give it a try when I build a new system this month.
Even if one nices and ionices beagle, there still is the matter of swap space
getting filled. Usually it
Rodney Baker wrote:
On Saturday 22 December 2007 23:08:36 Chris Arnold wrote:
Rodney Baker wrote:
Chris,
You can install compiz-fusion using one-click without first uninstalling
compiz. Yast will take care of dependicies, obsoletes etc. I have done
this successfully on 2 systems.
Chris Arnold wrote:
I am gonna try to explain this as clear as possible. I have an IBM thinkpad T43 and it has that other OS installed. It also has the recovery part on the hard drive that i do not want to destroy (as they did not ship recovery cd's with this system). I want to install suse 10.3
Bryen wrote:
On Fri, 2007-12-21 at 02:03 +0100, Carlos E. R. wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-12-20 at 14:31 -0600, Bryen wrote:
Unless of course that solution destroys the performance on the target
system. I am the one who started this thread, and as
On Friday 21 December 2007 01:06:38 [EMAIL PROTECTED] wrote:
On Thursday 20 December 2007 09:38:46 am Carlos E. R. wrote:
The Thursday 2007-12-20 at 09:22 -1000, [EMAIL PROTECTED] wrote:
Even if one nices and ionices beagle, there still is the matter of swap
space getting filled. Usually
Kevin Dupuy wrote:
On Wed, 2007-12-19 at 18:10 -0500, Aaron Kulkis wrote:
Stevens wrote:
Today Kevin Dupuy [EMAIL PROTECTED] wrote:
From what I'm reading right now, I'm presuming either you have no
documents, or they are all on your desktop. If you actually did work,
you would love Beagle. I
On Saturday 22 December 2007 15:45:53 Chris Arnold wrote:
I am an id10tI failed to see the note in bold that said if you want
a startup script, install this (which is compiz manager). I installed
this and now i have the windows decorations.
But now, i do not have window previews. It is
Anders Johansson wrote:
By default it only happens for windows on the current desktop. If you want it
for all windows on all desktops, you need to configure it
I see. So how do you configure it for all windows on all desktops?
Oh, and for the record, compiz fusion is available for SLED10
Chris Arnold wrote:
Anders Johansson wrote:
By default it only happens for windows on the current desktop. If you want
it
for all windows on all desktops, you need to configure it
I see. So how do you configure it for all windows on all desktops?
I see in CCSM, advanced search
On Saturday 22 December 2007 16:22:37 Chris Arnold wrote:
Anders Johansson wrote:
By default it only happens for windows on the current desktop. If you
want it for all windows on all desktops, you need to configure it
I see. So how do you configure it for all windows on all desktops?
If
Chris Arnold wrote:
I see in CCSM, advanced search and click the windows preview. In that
dialog i see taskbar and under it is taskbar shows only windows of
current viewpoint and it was checked. I unchecked it and reloaded window
manager using the compiz-fusion icon in the panel. Still does
On Saturday 22 December 2007 16:41:22 Chris Arnold wrote:
Chris Arnold wrote:
I see in CCSM, advanced search and click the windows preview. In that
dialog i see taskbar and under it is taskbar shows only windows of
current viewpoint and it was checked. I unchecked it and reloaded window
Anders Johansson wrote:
Can you change any settings at all in CCSM?
I wonder if perhaps you've started compiz fusion with the gconf configuration
setting
Well, i can uncheck windows preview and there isn't a windows preview
with the active window. So, i would answer yes, i can change
On Saturday 22 December 2007 16:50:14 Chris Arnold wrote:
Anders Johansson wrote:
Can you change any settings at all in CCSM?
I wonder if perhaps you've started compiz fusion with the gconf
configuration setting
Well, i can uncheck windows preview and there isn't a windows preview
with
jdd wrote about the triplicate installation sources I have listed:
Tnx jdd,
I'll do a clean-up although doesn't having more than one source provide
greater accessibility i.e. if the suse site goes down, perhaps the
updates have already been transferred to a mirror which I might then be
able to
Philippe Landau wrote:
Hi Hylton
Unfortunately updating OpenSuse is a mess,
but it is easy once you know the tricks.
Would you like to update to OpenSuse 10.3 ?
snip
It is the tricks I wanted to learn and updating to 10.3 I have decided
against although 11.0 is a 'definite' after watching
Using 10.3 and gnome with gdm. As the subject lines suggests, is there a
way to change the login screen background/color to something else
besides installing a new gdm?
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Anders Johansson wrote:
Hi,
Version updates for released products are extremely rare. Essentially, they
only happen when there is a serious bug or security problem, and a backport
of the fix is too complicated
So yes, if you really want updated versions of the software, you need to
On Thursday 20 December 2007 08:57:50 pm Aaron Kulkis wrote:
Kevin Dupuy wrote:
OK, here's the issue: you're not most people. I'm not most people. All
of us subscribed to this mailing list are probably not most people. And
most people don't name their files orderly, and put them in
On Saturday 22 December 2007 06:26:45 am Philippe Landau wrote:
Hello
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am using Main Repository OSS and non-OSS, nvidia, opensuse edu,
buildservice
On December 22, 2007 07:56:12 am Hylton Conacher (ZR1HPC) wrote:
jdd wrote about the triplicate installation sources I have listed:
Tnx jdd,
I'll do a clean-up although doesn't having more than one source provide
greater accessibility i.e. if the suse site goes down, perhaps the
updates
On Thu, 20 Dec 2007 21:57:50 -0500, Aaron Kulkis wrote:
Catering to idiots only encourages them to continue
their idiotic behavior.
By fully quoting the mail just to add that comment you're joining the
club.
Philipp
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail:
Druid wrote:
On Dec 22, 2007 9:43 AM, Hylton Conacher (ZR1HPC) [EMAIL PROTECTED] wrote:
Hi,
This has been bothering me for a long time as I am battling to
understand the usage of software repositories. I haven't been able to
find a reference in the fine manual of 10.2 that describes this ,
On December 22, 2007 04:26:45 am Philippe Landau wrote:
Hello
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am using Main Repository OSS and non-OSS, nvidia, opensuse edu,
buildservice mozilla
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Saturday 2007-12-22 at 09:42 -0500, Patrick Shanahan wrote:
SEND_MAIL_ON_NO_ERROR merely sets cron to report successful activity
to root. It did nothing to your cron job.
...
time a cron job is successful. You *will* change it when you
On Saturday 22 December 2007 17:49:50 Hylton Conacher (ZR1HPC) wrote:
If I get that dreaded upgraditis, I am then on my own,
I've never liked that expression. The whole point of a community is that
you're not on your own. There are mailing lists and forums, and you can
report the bug (if there
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Saturday 2007-12-22 at 16:06 +0100, Anders Johansson wrote:
[ulimit]
The real solution here is to find and fix the bug that causes beagle to
allocate so much memory. It doesn't happen on all systems.
When it happens, a bug should be opened,
On Saturday 22 December 2007 15:42:47 Patrick Shanahan wrote:
* Donald D Henson [EMAIL PROTECTED] [12-22-07 04:40]:
Hmmm. Something magic must have happened. The cron job ran and the
backup was updated. The only thing I changed was to set
SEND_MAIL_ON_NO_ERROR to Yes. (By the way, where
Robert Smits wrote:
On December 22, 2007 04:26:45 am Philippe Landau wrote:
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am using Main Repository OSS and non-OSS, nvidia, opensuse edu,
On Sat, Dec 22, 2007 at 06:07:01PM +0100, Philippe Landau wrote:
Robert Smits wrote:
On December 22, 2007 04:26:45 am Philippe Landau wrote:
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am
On Saturday 22 December 2007 10:30, Rajko M. wrote:
Catering to idiots only encourages them to continue
their idiotic behavior.
Insulting 90% of people doesn't help to make your case.
You have to understand that not everyone has the same goals in life as
you, and also that different
On Saturday 22 December 2007 18:00:43 Carlos E. R. wrote:
The Saturday 2007-12-22 at 16:06 +0100, Anders Johansson wrote:
[ulimit]
The real solution here is to find and fix the bug that causes beagle to
allocate so much memory. It doesn't happen on all systems.
When it happens, a bug
On Saturday 22 December 2007 18:06:37 Stevens wrote:
On Saturday 22 December 2007 10:30, Rajko M. wrote:
Catering to idiots only encourages them to continue
their idiotic behavior.
Insulting 90% of people doesn't help to make your case.
You have to understand that not everyone has
Rajko M. wrote:
On Saturday 22 December 2007 06:26:45 am Philippe Landau wrote:
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I am using Main Repository OSS and non-OSS, nvidia, opensuse edu,
On Saturday 22 December 2007 09:13, Anders Johansson wrote:
On Saturday 22 December 2007 18:06:37 Stevens wrote:
On Saturday 22 December 2007 10:30, Rajko M. wrote:
Catering to idiots only encourages them to continue
their idiotic behavior.
Insulting 90% of people doesn't help to
I'm still having issues with scheduling backups, and I resolved to get
them settled today. I could sure use some advice.
To summarize: I've gone through the motions to set up two kinds of
backups using YaST. One is a full system backup that I'd like to
schedule for once a week (and also run it
On Saturday 22 December 2007 19:43:50 Jerry Houston wrote:
(1) SHOULD I be able to run crontab as a standard user? Do I need to
add my user account to a specific group in order to be able to do that?
Yes you should. If you run crontab -e as a normal user, it should let you edit
the crontab
Anders Johansson wrote:
On Saturday 22 December 2007 15:42:47 Patrick Shanahan wrote:
* Donald D Henson [EMAIL PROTECTED] [12-22-07 04:40]:
Hmmm. Something magic must have happened. The cron job ran and the
backup was updated. The only thing I changed was to set
SEND_MAIL_ON_NO_ERROR to Yes.
Dennis E. Slice wrote:
I have a couple of 300GB USB drives (reiserfs) encrypted with SUSE 10.0.
Encrypted with which encryption system?
There are many to choose from... starting with software which
encrypts individual files, to filesystems that are entirely
hidden AND encrypted.
Can I
Gary Baribault wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Carlos E. R. wrote:
Notwithstanding the fact that Beagle created performance issues
on your
system, have you considered converting from MBox to Maildir
format for
your mail? This will increase performance both in terms
Hans Witvliet wrote:
On Sun, 2007-12-16 at 20:21 -0500, Aaron Kulkis wrote:
Ronald Wiplinger wrote:
I am a lucky winner of both IPv4 and IPv6.
I do not envy you.
Why? Works as it should.
I never said it didn't as it should.
Just let's say, the organizational issues of operating
a mixed
Randall R Schulz wrote:
On Friday 21 December 2007 11:10, primm wrote:
NFS is kind of ugly itself, don't you think?
Ugly? Naah! It's s neat. With nis and nfs anyone can login
anywhere and get their own files and start work right after they've
got a coffee. It just works. Just like NT
JJB wrote:
Is there something like /etc/init.d/gui stop?
The GUI is 5.
Apparently, you want run level 3 (multi-user with networking)
$ su
password:
# init 3
# exit
$
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On Saturday 22 December 2007 11:20:28 am Philippe Landau wrote:
Rajko M. wrote:
On Saturday 22 December 2007 06:26:45 am Philippe Landau wrote:
Without having switched to KDE4 i get conflicts
while trying to update OpenSuse 10.3.
Where does Suse store the list of repositories i use ?
I
Anders Johansson wrote:
On Saturday 22 December 2007 18:00:43 Carlos E. R. wrote:
The Saturday 2007-12-22 at 16:06 +0100, Anders Johansson wrote:
[ulimit]
The real solution here is to find and fix the bug that causes beagle to
allocate so much memory. It doesn't happen on all systems.
When
Sloan wrote:
Aaron Kulkis wrote:
Joe Sloan wrote:
Examples, please? What would be the security advantage of typing
/opt/SunWzztop/bin/top every time, instead of top, with
/opt/SunWzztop/bin in the path?
[EMAIL PROTECTED]:~ which top
/usr/bin/top
[EMAIL PROTECTED]:~
Why isn't top in /usr/bin
Ken Schneider wrote:
Aaron Kulkis pecked at the keyboard and wrote:
Joe Sloan wrote:
root's UID.
Examples, please? What would be the security advantage of typing
/opt/SunWzztop/bin/top every time, instead of top, with
/opt/SunWzztop/bin in the path?
[EMAIL PROTECTED]:~ which top
/usr/bin/top
Rajko M. wrote:
On Thursday 20 December 2007 08:57:50 pm Aaron Kulkis wrote:
Kevin Dupuy wrote:
OK, here's the issue: you're not most people. I'm not most people. All
of us subscribed to this mailing list are probably not most people. And
most people don't name their files orderly, and
Joe Sloan wrote:
Dave Howorth wrote:
Joe Sloan wrote:
in fact anything in /opt or /usr/local usually wasn't even in root's
path
I should hope not! root should have a strictly limited path to limit
security exploits.
I'm not sure the lack of finish characteristic of the old school unices
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-12-20 at 08:09 +0800, Joe Morris (NTM) wrote:
I would therefore suggest to pass cpufreq=no as a boot argument, and use
Tried that, yesterday. All went fine, till a minute ago, it freezed. A
key (shift), and it waked up. So,
On Friday 21 December 2007 10:28:01 am Aaron Kulkis wrote:
I just don't understand why it works so bad on such a good computer
and an average data load.
Simple, Gary.
It's poorly designed and/or written, because it's
behavior while executing is very careless, and consumes
resources far
Aaron Kulkis wrote:
And since top is trustworthy, just put a symbolic link in
/usr/bin to the top executable.
Admittedly, it's a patch up, but it's superior to playing
around with the $PATH variable(*) all the time
(*) for one, it doesn't help much for anyone who has a
currently running
On Dec 23, 2007 12:58 AM, umesh b [EMAIL PROTECTED] wrote:
On Dec 22, 2007 6:29 PM, Carlos E. R. [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Saturday 2007-12-22 at 08:49 +0100, Cristea Bogdan wrote:
I have an external USB modem and trying to get this
Conrad Cook wrote:
Yeah, that's pretty intense, man.
Glad you made it back in once piece..
I've been considering going around colleges hassling physicists with a
video camera, to document what science does and does not show. Too
many other, higher-priority, projects.
How's your big project
Rajko M. wrote:
On Friday 21 December 2007 10:28:01 am Aaron Kulkis wrote:
I just don't understand why it works so bad on such a good computer
and an average data load.
Simple, Gary.
It's poorly designed and/or written, because it's
behavior while executing is very careless, and consumes
Donald D Henson wrote:
I want to run nightly backups, using rdiff-backup. I want the backups to
go to one disk drive, Backup1, Monday thru Saturday and a different disk
drive, Backup2, on Sunday. I used Kcron to enter the crontab data
running as root. Here's what crontab looks like if I run
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Sunday 2007-12-23 at 01:23 +0530, umesh b wrote:
I have an EVDO USB modem provided by the local telco(ZTE AC8700). Its
working beautifully on open suse, except for when it redials after
connection is reset by telco( for some reason they say
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-12-21 at 11:31 -0500, JP Rosevear wrote:
mailbox format is not really accessible through mozilla APIs). This is
one reason the thunderbird backend is packaged separately, so a quick
thing for Gary to try is to rpm -e
Hi list,
SuSE10.2 plain vanilla.
- I just did a stupid thing...went into YaST and asked it to upgrade my
software. The little whatever-thing at the buttom of my screen has been
orange for many weeks, it always breaks when I try to upgrade my sw.
Yesterday, for some odd reason I clicked it,
On Friday 21 December 2007 08:28, Aaron Kulkis wrote:
snippage
I just don't understand why it works so bad on such a good computer
and an average data load.
Simple, Gary.
It's poorly designed and/or written, because it's
behavior while executing is very careless, and consumes
resources
On Saturday 22 December 2007, Jim Flanagan wrote:
Chris Arnold wrote:
Yesterday, i installed 10.3 on a test drive. Today, i installed 10.3 on
the regular drive and now i can't get nvidia drivers. No 3d... Yesterday,
i did an update and rebooted, my display was set for the correct
On Friday 21 December 2007 08:28, Aaron Kulkis wrote:
snippage
I just don't understand why it works so bad on such a good computer
and an average data load.
Simple, Gary.
It's poorly designed and/or written, because it's
behavior while executing is very careless, and consumes
resources
I have a Toshiba p205d-s7454 laptop with a built in atheros wireless card. The
chipset is 5006. I have tried SUSE, Debian, Fedora and Ubuntu, and no
distribution configures the card. I have tried madwifi and ndiswrapper.
Neither works for me. I need wireless, or the PC is useless to me. I
On Saturday 22 December 2007 02:43:11 pm Verner Kjærsgaard wrote:
If I start Kopete from the CLI, I get:
kopete: symbol lookup error: /opt/kde3/lib/libkopete.so.1: undefined
symbol: _ZN9KLineEdit17mouseReleaseEventEP11QMouseEvent
Hi Verner,
The answer is in the error:
Aaron Kulkis wrote:
3.5 inch floppies are going to become increasingly
difficult to find, in the same way that 12-inch,
8-inch, and 5-1/4-inch floppies before them became
rarer and rarer until becoming extinct.
Where'd you see a 12 floppy? The original, from IBM in the '70's was 8
--
Use
Anders Johansson wrote:
On Saturday 22 December 2007 18:06:37 Stevens wrote:
On Saturday 22 December 2007 10:30, Rajko M. wrote:
Catering to idiots only encourages them to continue
their idiotic behavior.
Insulting 90% of people doesn't help to make your case.
You have to understand that not
Hello,
When I configure kopete (msn), I see the web cam working (I see the
image), but when I connect, I have not image sent nor received.
where is the setup?
thanks
jdd
--
http://www.dodin.net
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
1 - 100 of 146 matches
Mail list logo
