On 27.06.19 16:24, Ben Greear wrote:
On 6/27/19 7:17 AM, Koen Vandeputte wrote:
On 26.06.19 18:39, Ben Greear wrote:
On 6/26/19 9:28 AM, Koen Vandeputte wrote:
On 26.06.19 18:16, Ben Greear wrote:
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06
On 26.06.19 18:39, Ben Greear wrote:
On 6/26/19 9:28 AM, Koen Vandeputte wrote:
On 26.06.19 18:16, Ben Greear wrote:
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote
On 20.06.19 12:45, Tautvydas Belgeras wrote:
When the utility sends a request it expects a response type message,
but does not explicitly check for it. When a device stays idle for
some time, it switches into a sleep mode, and notifies the utility with an
identification type message. In some
On 26.06.19 18:16, Ben Greear wrote:
On 6/26/19 2:02 AM, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote:
Hi Ben,
Hi All,
So I'm going to give
On 26.06.19 11:02, Koen Vandeputte wrote:
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote:
Hi Ben,
Hi All,
So I'm going to give this another try ..
As the IBSS
On 25.06.19 15:54, Ben Greear wrote:
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
On 24.06.19 22:04, Ben Greear wrote:
On 6/24/19 8:32 AM, Koen Vandeputte wrote:
Hi Ben,
Hi All,
So I'm going to give this another try ..
As the IBSS functionality is heavily advertised as a delta
On 19.06.19 11:41, Tautvydas Belgeras wrote:
When the utility sends a request it expects a response type message,
but does not explicitly check for it. When a device stays idle for
some time, it switches into a sleep mode, and notifies the utility with an
identification type message. In some
On 14.05.19 16:49, Petr Štetiar wrote:
Tautvydas Belgeras [2019-05-14 16:20:05]:
Hi,
Patch fixes utility returning "Unknown error" when generating a request
after a wait of a few minutes
quoting from https://openwrt.org/submitting-patches
* commit subject
- must have a prefix that
On 12.06.19 14:06, Jonas Gorski wrote:
On Wed, 12 Jun 2019 at 11:02, Koen Vandeputte
wrote:
On 11.06.19 23:12, Jonas Gorski wrote:
Hi,
On Tue, 11 Jun 2019 at 23:08, Stijn Tintel wrote:
Hi,
Since we now have a 19.07 branch, is it OK to switch KERNEL_PATCHVER for
targets in master
On 11.06.19 23:12, Jonas Gorski wrote:
Hi,
On Tue, 11 Jun 2019 at 23:08, Stijn Tintel wrote:
Hi,
Since we now have a 19.07 branch, is it OK to switch KERNEL_PATCHVER for
targets in master that have 4.19 support to 4.19?
Fine by me. The earlier we start testing 4.19, the faster we can iron
bytes) now.
Signed-off-by: Koen Vandeputte
---
target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
index
Hi All,
It seems the latest state (or packages) seems to contain a recursive
dependency:
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:63605: symbol PACKAGE_libmicrohttpd-ssl
depends on PACKAGE_libmicrohttpd-no-ssl
For a resolution refer to
On 29.03.19 13:55, Hauke Mehrtens wrote:
On 3/29/19 1:43 PM, Ben Greear wrote:
On 03/29/2019 02:58 AM, Koen Vandeputte wrote:
On 26.03.19 19:39, Ben Greear wrote:
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote
On 12.04.19 17:04, Roman Yeryomin wrote:
On 2019-04-12 17:39, Koen Vandeputte wrote:
On 12.04.19 16:32, Roman Yeryomin wrote:
Compile and run tested on mt7621 and ar71xx
new features:
- priority-inheritance mutexes
- membarrier syscall, pre-registration to use it, fallback emulation
- header
On 12.04.19 16:32, Roman Yeryomin wrote:
Compile and run tested on mt7621 and ar71xx
new features:
- priority-inheritance mutexes
- membarrier syscall, pre-registration to use it, fallback emulation
- header-level support for new linux features in 4.19, 4.20, 5.0
major internal changes:
-
On 31.03.19 15:45, Lorenzo Bianconi wrote:
could you please try to attached patch? The max distance the hw can
support depends of channel width:
e.g @20MHz (HT20, 5GHz)
max distance is ~ 61Km
@Koen: do you have any chance to test the attached patch in your
environment? Thx
Hi Lorenzo,
I
On 26.03.19 19:39, Ben Greear wrote:
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of all
issues seen so far:
Test setup:
- Board
On 27.03.19 22:56, Daniel Golle wrote:
Hi Koen,
I hope I fixed the issue with commit
7204736076 IB: fix generating .profile.mk for profiles without metadata
Please report back if you also see it fixed by this.
Hi Daniel,
I'm pleased to confirm it's fixed :-)
Appreciated!
Koen
On 15.03.19 10:00, Koen Vandeputte wrote:
Hi Daniel,
When running the image builder for my targets, I'm getting following
error:
"Can't use an undefined value as an ARRAY reference at
/mnt/ramdisk/koen/firmware/.21128/openwrt-imagebuilder-cns3xxx.Linux-x86_64/scripts/target-metada
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of all
issues seen so far:
Test setup:
- Board: Mikrotik RB922
- Hardware used: on-board QCA9882 (QCA988x), Wave1 2x2 .ac
Hi Ben,
Following our conversation from yesterday, here is a summary of all
issues seen so far:
Test setup:
- Board: Mikrotik RB922
- Hardware used: on-board QCA9882 (QCA988x), Wave1 2x2 .ac
- firmware's tested: both non-HTT and HTT flavours for qca988x
Synopsis:
- Setting the interface in
.
Selection can be done by toggling a GPIO.
By default, the USB is routed to the mini-PCIe slot.
Installation:
- Boot vmlinux-initramfs image via BOOTP/TFTP and then flash sysupgrade
image using "sysupgrade -n"
Signed-off-by: Koen Vandeputte
---
v2: fix double init of PCI and USB
.
Selection can be done by toggling a GPIO.
By default, the USB is routed to the mini-PCIe slot.
Installation:
- Boot vmlinux-initramfs image via BOOTP/TFTP and then flash sysupgrade
image using "sysupgrade -n"
Signed-off-by: Koen Vandeputte
---
.../ar71xx/base-files/etc/board.d/
Hi Daniel,
When running the image builder for my targets, I'm getting following error:
"Can't use an undefined value as an ARRAY reference at
/mnt/ramdisk/koen/firmware/.21128/openwrt-imagebuilder-cns3xxx.Linux-x86_64/scripts/target-metadata.pl
line 426."
It seems you made 2 changes last
Hi All,
Could someone with more knowledge regarding dependencies take a look at
this?
koen@bob:~/firmware/builds/generic_cns3xxx$ make menuconfig
feeds/packages/net/openconnect/Config.in:6:error: recursive dependency
detected!
For a resolution refer to
On 27.02.19 08:13, Lorenzo Bianconi wrote:
What I mean is just a p2p link running in AP-STA mode, I guess there is no
difference for users. Am I missing something?
Is dynack going to receive the late acks if I manage to run
wpa_supplicant (wpad-mini?) in plaintext or key_mgmt=NONE mode?
Hi All,
Another week .. another kernel bump ..
This week, stable 4.19 received a fair amount of changes for netfilter
and offloading stuff.
The bump required some altering of patches at critical locations to make
everything apply squeaky clean.
To be absolutely sure, I would like to
On 26.02.19 06:28, Joe Ayers wrote:
On Mon, Feb 25, 2019 at 8:42 AM Koen Vandeputte
wrote:
On 25.02.19 17:33, Joe Ayers wrote:
On Mon, Feb 25, 2019 at 1:56 AM Lorenzo Bianconi
wrote:
On 24.02.19 21:32, Joe Ayers wrote:
Hi Joe,
Hi Joe,
First of all, thanks for contributing this fix
On 25.02.19 17:33, Joe Ayers wrote:
On Mon, Feb 25, 2019 at 1:56 AM Lorenzo Bianconi
wrote:
On 24.02.19 21:32, Joe Ayers wrote:
Hi Joe,
Hi Joe,
First of all, thanks for contributing this fix. I've incorporated
into the http://www.arednmesh.org project, just getting into our
nightly
On 24.02.19 21:32, Joe Ayers wrote:
First of all, thanks for contributing this fix. I've incorporated
into the http://www.arednmesh.org project, just getting into our
nightly builds now. A comment and a couple questions...
The MAX_DELAY was way too short for our community, had to increase
done & verified.
Thanks Ben!
Koen
On 03.02.19 04:27, Ben Greear wrote:
Here are the sha-sums, the 002 version changes to 003.
If someone could update openwrt to use them I'd appreciate it. Changelog
is at the bottom. I am hoping this resolves the crashes related to
rate-ctrl.
9980
than that:
Tested-by: Koen Vandeputte
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Tested on cns3xxx, imx6, ar71xx, x86_64 (armv6k/mpcore, armv7, mips r2,
x86_64)
All ok
Tested-by: Koen Vandeputte
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 26.10.18 10:50, Koen Vandeputte wrote:
On 25.10.18 23:43, Christian Lamparter wrote:
On Thursday, October 25, 2018 10:57:48 AM CEST Koen Vandeputte wrote:
On 23.10.18 17:43, Christian Lamparter wrote:
Sorry, hit "Send" by accident
On Tuesday, October 23, 2018 2:37:16 PM
On 25.10.18 23:43, Christian Lamparter wrote:
On Thursday, October 25, 2018 10:57:48 AM CEST Koen Vandeputte wrote:
On 23.10.18 17:43, Christian Lamparter wrote:
Sorry, hit "Send" by accident
On Tuesday, October 23, 2018 2:37:16 PM CEST Koen Vandeputte wrote:
On 22.10.18 19:27,
Hi All,
As most of you know, ar71xx bumped to 4.14 which caused a slight kernel
oversize for some targets.
I crafted some patches to address this, but it requires testing.
As I don't have any of these devices locally, I would like to request
for some testing on any of the following devices:
On 23.10.18 17:43, Christian Lamparter wrote:
Sorry, hit "Send" by accident
On Tuesday, October 23, 2018 2:37:16 PM CEST Koen Vandeputte wrote:
On 22.10.18 19:27, Christian Lamparter wrote:
On Monday, October 22, 2018 3:48:29 PM CEST Koen Vandeputte wrote:
On 20.10.18 17:46, Hauk
On 20.10.18 20:26, Rosen Penev wrote:
Moved the config option to the proper location.
Signed-off-by: Rosen Penev
---
target/linux/mvebu/config-4.14 | 1 +
target/linux/mvebu/cortexa9/config-default | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
delete mode 100644
On 23.10.18 14:56, w...@reboot.ch wrote:
Hi, wondering why ar71xx snapshots are stuck at October 9
https://downloads.openwrt.org/snapshots/targets/ar71xx/generic/
Thank you!
- will
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On 22.10.18 19:27, Christian Lamparter wrote:
On Monday, October 22, 2018 3:48:29 PM CEST Koen Vandeputte wrote:
On 20.10.18 17:46, Hauke Mehrtens wrote:
On 10/18/2018 02:28 PM, Koen Vandeputte wrote:
starting from upstream commit 577b4eb23811 ("ubi: Reject MLC NAND")
it is n
On 20.10.18 17:46, Hauke Mehrtens wrote:
On 10/18/2018 02:28 PM, Koen Vandeputte wrote:
starting from upstream commit 577b4eb23811 ("ubi: Reject MLC NAND")
it is not allowed to use UBI and UBIFS on a MLC flavoured NAND flash chip. [1]
According to David Oberhollenzer [2]:
The re
t releases.
Support can be gracefully ended when a new release-branch is created.
Signed-off-by: Koen Vandeputte
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.77=577b4eb23811dfc8e38924dc476dbc866be74253
[2] https://lore.kernel.org/patchwork/patch/920344/
-
On 2018-10-15 16:20, Nick wrote:
Hi,
did someone manage to follow the Readme.md?
I got several problems when compiling juci in Xubuntu 18.04.
First where was a Regex mismatch.
And then npm makes trouble.
Now there is a new issue:
touch
Hi All,
Regarding bumping ar71xx to 4.14, from my point of view all known issues
seem to be fixed.
Therefore, I'm planning to actually make 4.14 the default for this
target mid next week.
If you still have issues which would not allow this, please let me know
asap. (and provide a log of the
On 2018-10-03 20:06, Dirk Brenken wrote:
On Mi, 2018-10-03 at 17:59 +0200, Koen Vandeputte wrote:
On 2018-08-13 17:14, John Crispin wrote:
Hi,
as 19.01 will probably use v4.14 as baseline and ath79 wont be a
full
replacement for ar71xx by then we decided to bump ar71xx to v4.14
On 04-10-18 02:49, Paul Blazejowski wrote:
Koen,
Please see below, i don't know if John got my mail but i surely missed
the updated mailing list address last time...
If full console logs are needed, please let me know.
Thank you,
-paul
Hi Paul,
I fixed this a while ago [1]
Could you
On 2018-08-13 17:14, John Crispin wrote:
Hi,
as 19.01 will probably use v4.14 as baseline and ath79 wont be a full
replacement for ar71xx by then we decided to bump ar71xx to v4.14.
This is available for testing inside my staging tree ->
On 2018-10-02 12:22, Kevin Darbyshire-Bryant wrote:
Refresh patches.
Remove upstreamed patch:
generic/pending-4.14/192-Revert-ubifs-xattr-Don-t-operate-on-deleted-inodes.patch
Compile-tested on: ath79
Runtime-tested on: ath79
Signed-off-by: Kevin Darbyshire-Bryant
---
This could do with
On 2018-09-23 00:42, Hauke Mehrtens wrote:
Hi,
We talked about plans for the next OpenWrt releases in this mail thread:
http://lists.infradead.org/pipermail/openwrt-adm/2018-July/000849.html
This mail is more or less a summary of the conclusions, this is still
open for change especially the
On 2018-09-16 23:05, Koen Vandeputte wrote:
On 16-09-18 17:28, Stijn Segers wrote:
Refreshes patches and bumps 4.14 kernel to 4.14.70 for OpenWrt 18.06.
Compile-tested on ramips/mt7621, x86/64.
Run-tested on ramips/mt7621, x86/64.
Signed-off-by: Stijn Segers
---
Hi Stijn,
Thanks
On 16-09-18 17:28, Stijn Segers wrote:
Refreshes patches and bumps 4.14 kernel to 4.14.70 for OpenWrt 18.06.
Compile-tested on ramips/mt7621, x86/64.
Run-tested on ramips/mt7621, x86/64.
Signed-off-by: Stijn Segers
---
Hi Stijn,
Thanks for the patch.
I've notified Richard Weinberger of
On 16-09-18 21:39, Richard Weinberger wrote:
Koen,
Am Samstag, 15. September 2018, 09:13:09 CEST schrieb Richard Weinberger:
Koen,
Am Dienstag, 11. September 2018, 16:26:34 CEST schrieb Koen Vandeputte:
On 2018-09-11 15:46, Koen Vandeputte wrote:
Hi Richard,
...
I'm only seeing
Hi All,
When I'm doing a lot of fresh builds for testing purposes, some of them
tend to fail sometimes with following error:
make[3]: Entering directory
'/mnt/ramdisk/koen/firmware/builds/generic_imx6/package/base-files'
rm -f
On 2018-09-11 15:46, Koen Vandeputte wrote:
Hi Richard,
...
I'm only seeing these issues on UBIFS enabled volumes.
It seems it's related to one of your 5 commits, but I'm still in the
process of bisecting to find the actual culprit.
As soon as I've found it, I'll let you know, but maybe
Hi Richard,
I'm currently in the process of updating the kernel version within
OpenWrt. (4.14.68 to 4.14.69)
Testing shows some issues on devices using specifically UBIFS.
Altering a perfect valid writable file shows weird errors:
[ Node 2 | node-2 ] ls -l /root/custom/scripts/banner.sh
On 2018-09-06 18:16, Christian Lamparter wrote:
On Thursday, September 6, 2018 12:31:23 PM CEST Koen Vandeputte wrote:
This one is running stable here on a lot of different devices (and
targets) for the past 48 hours
Tested-by: Koen Vandeputte
That's good to hear. Did you see any new
This one is running stable here on a lot of different devices (and
targets) for the past 48 hours
Tested-by: Koen Vandeputte
Christian,
A few hours after release, Rich committed some quick-fixes for various
stuff.
Do some of these need backporting on top of this patch in your opinion
On 2018-09-05 10:01, Felix Fietkau wrote:
On 2018-09-04 22:04, Felix Fietkau wrote:
Just tested it, and it works just fine in my build. Did you use the
image builder from the snapshot build, or did you build your own?
Will provide an update asap.
Hi Felix,
I found the culprit ..
I
On 2018-09-05 10:01, Felix Fietkau wrote:
On 2018-09-04 22:04, Felix Fietkau wrote:
On 2018-09-04 18:39, Koen Vandeputte wrote:
Hi Felix,
Starting from commit [1], I'm getting this error when trying to use the
Imagebuilder, even when selecting them in the build:
...
Package libc (1.1.19-1
Backport most significant upstream fixes (excl. hwsim fixes)
Refreshed all patches.
Contains important fixes for CSA (Channel Switch Announcement)
and A-MSDU frames.
Signed-off-by: Koen Vandeputte
---
...-teardown-code-before-de-registering.patch | 38 +++
...x-HWMP-sequence-numbering
Hi Felix,
Starting from commit [1], I'm getting this error when trying to use the
Imagebuilder, even when selecting them in the build:
...
Package libc (1.1.19-1) installed in root is up to date.
Package libgcc (7.3.0-1) installed in root is up to date.
Package logd (2018-02-14-128bc35f-2)
Hi John,
Thanks for the updates!
mac80211:
I've tested mac80211 on a large number of targets in the field:
- ~25 devices
- half of them having up to 4 wlan ifaces
- all running in IBSS
- Distance varying from 20m up to ~50km
For my cases, it seems to work well.
Small nit-pick:
In the
On 2018-08-23 19:00, Sven Schönhoff wrote:
curious what i missed as my archer-c7-v4 is working fine. TPLINK
AC1750 device
Hi,
please dont top post
I have no idea what you are asking.
Meaning I don't understand his issue mine works fine, so I'm curious as to
what's different
I would
hin the mediatek target,
which otherwise is applied twice and results in a build error.
Fixes: 7af1fb9faafb ("kernel: add a RPS balancer")
Signed-off-by: Koen Vandeputte
---
.../0048-net-core-add-RPS-balancer.patch | 90 ---
1 file changed, 90 deletions(-)
delete mo
On 2018-08-22 16:14, Koen Vandeputte wrote:
ar71xx:
I'm now currently testing your ar71xx 4.14 bump (comitted today in
master) on a few different targets:
- Gl-mifi
- Rocket-m5
- RB912
- RB2011
...
Will let you know the results.
Hi John,
I started with trying on a Mikrotik RB2011
ar71xx:
I'm now currently testing your ar71xx 4.14 bump (comitted today in
master) on a few different targets:
- Gl-mifi
- Rocket-m5
- RB912
- RB2011
...
Will let you know the results.
Hi John,
I started with trying on a Mikrotik RB2011 as these have a Serial port.
Ethernet does not
linux/mtd/rawnand.h: No such
file or directory
#include
^
compilation terminated.
Fixes: 318e19ba6755 ("ar71xx: add v4.14 support")
Signed-off-by: Koen Vandeputte
---
target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c | 6 +-
target/linux
^
Fixes: 318e19ba6755 ("ar71xx: add v4.14 support")
Signed-off-by: Koen Vandeputte
---
target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c | 1 +
target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c | 1 +
target/linux/ar71xx
^
arch/mips/ath79/mach-rb2011.c:23:10: fatal error: linux/mtd/rawnand.h: No such
file or directory
#include
^
cc1: all warnings being treated as errors
compilation terminated.
Fixes: 318e19ba6755 ("ar71xx: add v4.14 support")
On 2018-08-13 17:14, John Crispin wrote:
Hi,
as 19.01 will probably use v4.14 as baseline and ath79 wont be a full
replacement for ar71xx by then we decided to bump ar71xx to v4.14.
This is available for testing inside my staging tree ->
This target is on 4.9 currently.
It seems the support for this old kernel never got dropped.
Signed-off-by: Koen Vandeputte
---
target/linux/ar7/config-3.18 | 129
.../001-mips-ar7-fix-serial.patch | 23 --
...re-the-port-type-s-FCR-value-is-used.patch
Refreshed all patches.
Compile-tested on: adm5120, adm8668, au1000, mcs814x, ppc40x, ppc44x, xburst
Runtime-tested on: none
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 +-
.../patches-3.18/007-adm5120_pci.patch| 2 +-
.../101
During compiling/testing the new kernel bumps, I'm getting this on 7
different builds:
make[3]: Entering directory
'/mnt/ramdisk/koen/firmware/builds/generic_cns3xxx/package/base-files'
rm -f
Hi All,
During bumping this morning, I noticed the master already mentions 4
different kernel versions currently ..
In master:
- kernel 4.4 is not used by any target
In 18.06:
- kernel 3.18 is not used by any target
- kernel 4.4 is not used by any target
Removing these would already
Hi Stijn,
It seems a new helper was introduced in newer kernels:
-- a/fs/ext4/super.c
++ b/fs/ext4/super.c
@@ -3103,14 +3103,8 @@ static ext4_group_t ext4_has_uninit_itab
if (!gdp)
continue;
- if (gdp->bg_flags &
On 2018-07-30 21:31, Stijn Segers wrote:
* Refreshed patches.
* Removed patches:
-
target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
superseded by upstream
-
target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch
On 2018-07-30 21:31, Stijn Segers wrote:
* Refreshed patches.
* Patches made redundant by changes upstream:
-
target/linux/ramips/patches-4.14/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
* Patches accepted upstream:
-
On 2018-07-30 15:05, Jo-Philipp Wich wrote:
Hi Koen,
In function 'ath10k_dfs_radar_report':
/mnt/ramdisk/koen/firmware/builds/generic_glmifi/build_dir/target-mips_24kc_musl/linux-ar71xx_generic/ath10k-ct-2018-05-30-127f9818/ath10k-4.13/wmi.c:3993:7:
error: too few arguments to function
On 2018-07-30 14:55, Rafał Miłecki wrote:
On Mon, 30 Jul 2018 at 11:46, Koen Vandeputte
wrote:
I started building today's master this morning for 7 different targets,
and most of them failed. (some 4.9 and some 4.14 kernels)
On ar71xx (Rocket M5) :(Added Rafał in CC as I noticed he
On 2018-07-30 11:46, Koen Vandeputte wrote:
Hi All,
I started building today's master this morning for 7 different
targets, and most of them failed. (some 4.9 and some 4.14 kernels)
On ar71xx (Rocket M5) : (Added Rafał in CC as I noticed he worked
on this)
touch
/mnt/ramdisk/koen
Hi All,
I started building today's master this morning for 7 different targets,
and most of them failed. (some 4.9 and some 4.14 kernels)
On ar71xx (Rocket M5) : (Added Rafał in CC as I noticed he worked on
this)
touch
On 2018-07-12 10:27, David Johnson wrote:
It seems its quite hard to find a board that is fully supported by
openwrt that has 2x mini pci-express, 2x ethernet ports (WAN, LAN), >
64M flash
I want to plug in ath10k supported 802.11ac mini pci-e radios
Any thoughts suggestions
Thanks
David
On 2018-07-11 10:11, Kevin Darbyshire-Bryant wrote:
Really not convinced I agree with the "patch 335 removes the whole code block
where that one line changed in upstream”. Did a refresh myself, several times, and
patch 335 is a right confusing pain in the backside. I think the block in
On 2018-07-10 22:08, Stijn Segers wrote:
Refreshed patches. The bump from .53 to .54 introduced a minor change in
net/netfilter/nf_tables_api.c [1] but I am unable to
judge if this is a fluke or not, so I'd like a second pair of eyes on that.
It's a single 'table[0]' being replaced by
On 2018-07-10 13:12, Felix Fietkau wrote:
On 2018-07-10 12:37, Koen Vandeputte wrote:
Hi All,
Since the NASM additions, I'm getting this build error when compiling
for target x86_64:
I'm NOT getting the errors on builds for targets: ar71xx, cns3xxx, imx6
I did some more digging and figure
Hi All,
Since the NASM additions, I'm getting this build error when compiling
for target x86_64:
I'm NOT getting the errors on builds for targets: ar71xx, cns3xxx, imx6
--
Libraries have been installed in:
Hi Jo,
Since this morning, there seems to be a recursive dependency present.
Judging by the output and the changes in Luci repo, I suspect the source
is one of your latest commits?
tmp/.config-package.in:57794:error: recursive dependency detected!
For a resolution refer to
Fixed 12150m: 31 Mbit/s
Dynack:86 Mbit/s
Fixed 6300m: 55 Mbit/s
Dynack:87 Mbit/s
Fixed 3000m: 67 Mbit/s
Dynack:87 Mbit/s
Signed-off-by: Koen Vandeputte
---
package/kernel/mac80211/Makefile | 14 +-
1 file changed, 13 insertions(+), 1 deletion(-)
diff
On 2018-06-29 14:25, Bjørn Mork wrote:
Koen Vandeputte writes:
The original location seems unavailable, and the backup has a wrong hash ..
See
https://www.zdnet.com/article/gentoo-github-mirror-hacked-and-considered-compromised/
Bjørn
Thanks Bjørn!
This looks like a good up-to-date
The original location seems unavailable, and the backup has a wrong hash ..
make[3]: Entering directory
'/mnt/ramdisk/koen/firmware/builds/generic_x86_64/package/utils/usbutils'
mkdir -p /mnt/ramdisk/koen/firmware/builds/generic_x86_64/dl
SHELL= flock
Refreshed all patches
Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk| 4 ++--
...-cleanup-offload-hooks-on-netdev-unregister.patch | 9 ++---
...loc_node_mem_map
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk| 4 ++--
.../ar71xx/patches-4.9/500-MIPS-fw-myloader.patch| 2 +-
.../generic/pending-4.9/308-mips32r2_tune.patch | 2
Refreshed all patches
Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
.../950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch| 2 +-
.../patches-4.9/950-0195
Refreshed all patches
Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
.../950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch| 2 +-
.../patches-4.9/950-0195
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 +-
.../patches-4.9/910-unaligned_access_hacks.patch | 2 +-
..._pl011-Don-t-use-DT-aliases-for-numbering.patch | 2
Refreshed all patches
Compile-tested on: cns3xxx, imx6, x86-64
Runtime-tested on: cns3xxx, imx6, x86-64
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
.../324-v4.16-netfilter-flow-table-support-for-IPv6.patch | 2 +-
.../350-v4.18
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 +-
...adcom-Move-bcm54xx_auxctl_-read-write-to-.patch | 6 +-
...oadcom-Allow-enabling-or-disabling-of-EEE.patch | 2
Refreshed all patches
Compile-tested on: cns3xxx, imx6, x86-64
Runtime-tested on: cns3xxx, imx6, x86-64
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk | 4 ++--
.../patches-4.14/0035-MIPS-ath79-fix-QCA956x-boot.patch| 6 +++---
.../324-v4.16
101 - 200 of 217 matches
Mail list logo