Hi,
Even jow@openwrt and blogic@openwrt do not exist anymore as of now.
Recipient address rejected: User unknown in virtual mailbox table
While for example juhosg@openwrt still exists.
I just hope this will not become another "ffmpeg vs libav"...
Cheers,
Vittorio
On 05/05/2016 02:00:29
Hi,
On 02/05/2016 21:54:06 CEST, Baptiste Jonglez wrote:
On Mon, May 02, 2016 at 09:37:07PM +0200, Baptiste Jonglez wrote:
On Mon, May 02, 2016 at 08:17:48PM +0200, Vittorio Gambaletta (VittGam) wrote:
> Since drop_invalid has been turned on by default, ICMPv6 echo requests
> to well-known
On 02/05/2016 10:06:49 CEST, John Crispin wrote:
On 02/05/2016 09:55, Vittorio G (VittGam) wrote:
Actually there's a problem with this patch: the tabs have been converted
to spaces by your mailer, so it does not apply directly...
The patch on GitHub is fine by the way.
Cheers,
Vittorio
you
Actually there's a problem with this patch: the tabs have been converted
to spaces by your mailer, so it does not apply directly...
The patch on GitHub is fine by the way.
Cheers,
Vittorio
On 01/05/2016 23:59:27 CEST, Vittorio G (VittGam) wrote:
On 01/05/2016 23:36:05 CEST, Saverio Proto
On 01/05/2016 23:36:05 CEST, Saverio Proto wrote:
This patch is also available here:
https://github.com/zioproto/openwrt15051-batman/commit/0281382bcaa139f0d1d3b589797af4c434747f3e
commit 0281382bcaa139f0d1d3b589797af4c434747f3e
Author: Saverio Proto
Date: Sun May 1
On 25/04/2016 23:10:22 CEST, Martin Blumenstingl wrote:
maybe you could document this in the wiki: [0]
Most people check the wiki when they are looking for configuration
hints like this
Done: https://wiki.openwrt.org/toh/tp-link/td-w8970#leds
Cheers,
Vittorio
Hello,
I've seen that Lantiq XRX200 trunk images are only being built for the VG3503J.
Is this intended, or a mistake?
Thank you.
Cheers,
Vittorio
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On 25/04/2016 15:14:31 CEST, John Crispin wrote:
i understand the problem, but the WPS led is for WPS and should be left
free for the WPS feature eventually. so nack on this one i am afraid.
Ok, thank you anyway.
For the record, if anyone wants the old behaviour they just need to put
this in
On 22/04/2016 08:34:41 CEST, Mathias Kresin wrote:
Am 21.04.2016 um 23:43 schrieb Vittorio Gambaletta (VittGam):
After recent patches, the status LED on this router would stay
switched off after boot is completed. A switched off status LED
often indicates a boot failure (eg. kernel panic), so
Hi P.Wassi,
The code itself does not seem to be broken.
But the whitespace on the beginning of every line is missing.
It is possible that your email client has mangled it.
So the patch cannot be applied with the "patch" tool, since that
whitespace is essential in diff files.
Also, on your site
Hello,
It seems that whitespace is broken in this patch.
Can you resend it, please?
Thank you,
Vittorio G
On 20/01/2016 10:05:20 CET, p.wa...@gmx.at wrote:
From: P.Wassi
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi
---
This patch adds:
* New machine type
* Code for
56 CET, John Crispin wrote:
Hi,
the patch/series does not apply to CC
John
On 01/01/2016 00:00, Vittorio G (VittGam) wrote:
Signed-off-by: Vittorio Gambaletta <open...@vittgam.net>
---
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ra
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device *pdev)
}
Line 461 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).
So, this patch fixes the comment in line 460.
Signed-off-by: Vittorio
This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.
Line 443 enables all ethernet ports, so line 486 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -57,6 +57,7 @@
esw@1011 {
This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.
Line 461 enables all ethernet ports, so line 508 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not
Line 443 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).
So, this patch fixes the comment in line 442.
Signed-off-by: Vittorio
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device *pdev)
}
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -63,6 +63,7 @@
esw@1011 {
The prefix used in the driver is now "mediatek" instead of "ralink".
Signed-off-by: Vittorio Gambaletta
---
--- /dev/null
+++
b/target/linux/ramips/patches-4.3/0514-Documentation-DT-net-mediatek-fix-documentation-for-.patch
@@ -0,0 +1,23 @@
+From: Vittorio Gambaletta
This patch configures the correct ath9k WLAN LED polarity for the TDW8970,
and for the TDW8980 as well.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/lantiq/dts/TDW8970.dts
+++ b/target/linux/lantiq/dts/TDW8970.dts
@@ -4,8 +4,4 @@
/ {
model =
On 16 December 2015 22:12:15 CET, Mathias Kresin wrote:
>The TDW8980 2.4 GHz Wireless LED is active high as well and your patch
>fixed the inverse lighting.
>
>Would you please move the definition to the dtsi!
Sure, I will update the patches then. Thanks for testing!
On 16 December 2015 23:13:16 CET, Mathias Kresin wrote:
>This look unnecessary to me.
>
>The default internet led configuration a few lines above, already adds
>an internet led with exactly the same values.
>
>The same applies to the wifi led. I can not yet explain
The TDW8970 has a AR9381, which is the bgn 3x3:3 variant of the AR938x family.
The TDW8980 has a AR9287, which is the bgn 2x2:2 variant of the AR928x family.
This means that the chip for both routers is 2.4 GHz only.
Anyway, the manufacturer didn't disable the 5 GHz band in the EEPROM partition
This patch configures the correct ath9k WLAN LED polarity for the TDW8970.
Signed-off-by: Vittorio Gambaletta
---
The TDW8970 LED is active high, but I'm not sure about the TDW8980 as
I don't have one. If the TDW8980 LED is active high as well, this can
be added to
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/generic/files/include/linux/ath9k_platform.h
+++ b/target/linux/generic/files/include/linux/ath9k_platform.h
@@ -36,6 +36,7 @@ struct ath9k_platform_data {
bool tx_gain_buffalo;
bool disable_2ghz;
Signed-off-by: Vittorio Gambaletta
---
---
a/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++
b/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -51,13 +51,14 @@ Signed-off-by: John
Signed-off-by: Vittorio Gambaletta
---
--- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
@@ -159,7 +159,7 @@
+ trigger = ieee80211_get_radio_led_name(sc->hw);
-
- Use common OpenWrt blink patterns instead of custom ones
- Add preinit_regular hook
- Handle the TDW89X0 that does not have a configurable power LED
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/lantiq/base-files/etc/diag.sh
+++
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -38,6 +38,10 @@ BTHOMEHUBV5A)
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband"
"pppoa-wan"
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
This is a backport of the patch for trunk.
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@
Line 461 is actually enabling all switch ports, so line 508 is always getting
zero ports to be disabled (except for port 5 in SoCs where this is not
implemented,
as it will be sticky disabled in register POC0).
Also, the bootloader on some routers sets all ports to disabled (which is
the case
Signed-off-by: Vittorio Gambaletta
---
Please apply to both trunk and CC.
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -1417,19 +1417,19 @@ static int esw_probe(struct
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
Please apply to trunk only, a backport will follow.
--- a/target/linux/ramips/dts/HT-TM02.dts
+++
Hi,
On 11/12/2015 10:32:08 CET, John Crispin wrote:
1) the subject and description dont match.
Well, the description is an addition to the subject, but okay.
2) why would we want to intermingle the portmap and register init
variables. they are 2 different things. imho that is not correct
On 11/12/2015 15:02:43 CET, John Crispin wrote:
On 11/12/2015 14:48, Vittorio G (VittGam) wrote:
We cannot use board.json data here: this code is called before mounting
the rootfs, in the preinit.
we can. i just spoke with jow and we will add a codepath to failsafe to
probe board.json
Hi,
On 11/12/2015 12:29:00 CET, John Crispin wrote:
On 05/12/2015 12:04, Vittorio G (VittGam) wrote:
esw@1011 {
ralink,portmap = <0x10>;
+ ralink,portdisable = <0x2f>;
};
i think it makes more sense to derive 0x2f from the
Hi,
On 11/12/2015 14:32:45 CET, John Crispin wrote:
hardcoding the board id here is not a good idea. we should rather use
the board.json data to probe if a switch is registered. if not we dont
apply the hack. i'll ask jow to tell us how to probe for a switch.
We cannot use board.json data
Hi,
On 11/12/2015 15:12:32 CET, Arjen de Korte wrote:
Because there are two __be32's used to fetch data from the device
tree; one is used only once for the portmap, while the other is
used three times, for the two registers and for the led_polarity.
Maybe the name should be tmp instead, but I
On 12/12/2015 08:23:24 CET, John Crispin wrote:
tl;dr
It does not change current behaviour because all ports get enabled before.
if you want this merged you will need to add a port_disabled variable
I don't like it this way, but okay I will add that variable.
Signed-off-by: Vittorio Gambaletta
---
At the end, let's leave port_map and reg_init, and in the next patch
reuse port_map for port_disable too.
Please apply to both trunk and CC.
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++
Line 461 is actually enabling all switch ports, so line 508 is always getting
zero ports to be disabled (except for port 5 in SoCs where this is not
implemented,
as it will be sticky disabled in register POC0).
Also, the bootloader on some routers sets all ports to disabled (which is
the case
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -63,6 +63,7 @@
esw@1011 {
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -57,6 +57,7 @@
esw@1011 {
Hi,
On 12/12/2015 07:20:43 CET, John Crispin wrote:
On 12/12/2015 07:19, John Crispin wrote:
why a semicolon ? i believe a "," needs to be added instead please also
remove the superfluous "," while you are at it to make the comment
orthographically correct. it seems to be have been copied from
Hi,
On 12/12/2015 07:16:09 CET, John Crispin wrote:
patch 1/3 and 3/3 seem to be missing for this eries
Patches 1/3 and 2/3 are the same for trunk and CC, and there is a
comment saying that on those patches. Patch 3/3 would not apply
cleanly to CC instead, so that's why it's splitted.
On 05/12/2015 23:48:07 CET, Christian Lamparter wrote:
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
+ mtd="/dev/$(nand_find_volume $ubidev $part)"
+ [ -n "$mtd" ] || \
+
Also avoid using two variables where one can be used.
Signed-off-by: Vittorio Gambaletta
---
Please apply to both trunk and CC.
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -63,6 +63,7 @@
esw@1011 {
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta
---
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -57,6 +57,7 @@
esw@1011 {
The failsafe VLAN workaround is not needed on HT-TM02 (RT5350); it actually
breaks
failsafe since this router has only one port and it is 4 and not 0.
Anyway, it seems that the workaround is still needed for other routers (see
https://patchwork.ozlabs.org/patch/424017/ for a previous attempt at
Line 461 is actually enabling all switch ports, so line 508 is always getting
zero ports to be disabled (except for port 5 in SoCs where this is not
implemented,
as it will be sticky disabled in register POC0).
Also, the bootloader on some routers sets all ports to disabled (which is
also the
Il 08.09.2015 10:15 Steven Barth ha scritto:
as of https://dev.openwrt.org/changeset/46809 telnet is no longer part of
the base images. As a replacement, it is now possible to login to the root-
account via SSH without a password prompt whenever no root password is set,
e.g. after a flash
Il 08.09.2015 20:34 Vittorio G (VittGam) ha scritto:
Maybe it would just be better to set the default root password to 'openwrt'
or 'insecure' or 'change_me!'?
Maybe along with a preauthentication banner that tells the user about the
default password and the fact that it should be changed
Il 08.09.2015 21:31 Michael Heimpold ha scritto:
I also remember that "long time ago" there were issues because of
not enough entropy available on embedded devices.
Is this still an issue? Should only delay the time when logging in is
possible, right?
The dropbearkey key generation will delay
Il 08.09.2015 18:31 Janusz Dziemidowicz ha scritto:
SSH time can be greatly reduced by using ECDSA host key. Dropbear can
be compiled with ECDSA support, however:
- it is disabled by default in OpenWRT
- startup script only generates RSA/DSA host keys, ECDSA host key must
be generated manually
Il 08.09.2015 20:06 Sami Olmari ha scritto:
Does Dropbeard support ether? I know OpenSSH does, but default
installation does not use that.
I just checked the changelog[1] and I remembered wrong about chacha20.
But it does support curve25519 indeed; it was added along ECDSA:
2013.61test -
Il 03.09.2015 16:59 demos ha scritto:
That is a possible list for further coordination of resistance:
http://lists.prplfoundation.org/cgi-bin/mailman/listinfo/fcc
Here is a wiki page from LibrePlanet that is explaining the problem
and its conseguences in depth and tries to coordinate
Hello,
Are we talking about E3372h or E3372s?
I've got E3372h working by doing this:
echo 6000 /sys/class/net/wwan0/cdc_ncm/tx_max
echo 0 /sys/class/net/wwan0/cdc_ncm/min_tx_pkt
But it seems it didn't help an E3372s owner unfortunately. :/
My stick is a E3372h-153 with firmware
Il 10.03.2015 20:42 John Crispin ha scritto:
we can hook this up with the board detect code. i'll put it on my todo
list. might take a bit till i find the time
That would be great!
By the way, we should test if recent revisions fix the checksum issue so that
we can completely remove this
Il 10.03.2015 14:18 John Crispin ha scritto:
hi
can you send a version that has the pattern shown below please
and 0 1 2 3 4 5 6 is wrong, exclude the wan port from the list please.
John
The problem is that it's not easy to determine what number the LAN or WAN port(s) is/are.
On
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 52acc6b..fb047b4 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@
This patch fixes the failsafe switch workaround to avoid soft-bricking routers
where the only exposed Ethernet port is not 0 (it is 4 for the HT-TM02 for
instance).
This is a follow-up of http://patchwork.ozlabs.org/patch/424017/ (sorry for the
delay).
Signed-off-by: Vittorio Gambaletta
Please also backport to Barrier Breaker (this same patch applies there too).
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
index 8b03645..84b6937 100644
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -646,7 +646,7 @@
*TL-MR11U)
name=tl-mr11u
;;
- *TL-MR13U)
+ *TL-MR13U v1)
Hi,
Il 17.01.2015 14:55 John Crispin ha scritto:
On 25/12/2014 02:29, Vittorio G (VittGam) wrote:
It is not needed anymore as TCP packets get passed correctly now
even when VLAN is disabled.
are you sure this is the case for all rt3x5x, rt5350 and mt7628 units ?
I've tested it on my
Il 09.01.2015 16:17 Florian Fainelli ha scritto:
What about a statically linked binary at least?
Of course I've missed the obvious thing here. :) Thanks for the
suggestion! I'm going to try this as soon as I've some spare time (in a
week or so). Otherwise the code is on my github if you
Hi,
What is the reason has this been rejected? Do I need to change
something?
Thanks,
Vittorio
Il 28.12.2014 13:34 Vittorio G (VittGam) ha scritto:
The mkhootoofw.sh is a shell script, because official factory images
are shell scripts by themselves, and it made more sense to me to just
use
Hi everybody,
Is nobody else experiencing this on their ramips/rt5350-based router?
Cheers,
Vittorio G
Il 25.12.2014 02:55 Vittorio G (VittGam) ha scritto:
Hi everybody,
I've got some HooToo HT-TM02 rt5350-based routers, and I've noticed a
quite weird thing with LEDs.
It seems that the LED
This restores normal pre-r43715 200ms blink-period for the System LED we're all
accustomed to see while our OpenWrt routers are booting.
Failsafe possibility will now be signalled with a new 100ms blinking, which is
easily recognizable from the normal 200ms booting.
So no existing user will be
Il 09.01.2015 10:48 John Crispin ha scritto:
+mkhootoofw.sh $(DL_DIR)/hootoo_mtd_writer $(call
sysupname,$(1),$(2)) $(call imgname,$(1),$(2))-factory.bin
+endef +BuildFirmware/HooToo8M/initramfs=$(call
BuildFirmware/OF/initramfs,$(1),$(2),$(3)) +
this bit is really bad. you cannot install
Il 06.01.2015 12:18 Felix Fietkau ha scritto:
On 2014-12-25 02:28, Vittorio G (VittGam) wrote:
- Update terminal window title with current directory and hostname
like on Ubuntu.
- Add an optional colored prompt, in case user wants to enable it.
- Add ll, an useful alias to ls.
Signed-off
Il 29.12.2014 09:04 Rafał Miłecki ha scritto:
1) I think that most OpenWrt users, like me, are accustomed to see a
led
pattern of 200ms. I thought it was a bad flash or something else bad
when
I've seen that 500ms blinking...
Is there any reason for that? Was 200ms ever used or documented by
Hi,
Il 25.12.2014 12:37 Paul Fertser ha scritto:
Hello,
Few comments from a person that doesn't own this device (but owns an
MPR-A1 clone).
Vittorio G (VittGam) writes:
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP
packets get passed correctly now. (This router only
Il 25.12.2014 13:26 Paul Fertser ha scritto:
On Thu, Dec 25, 2014 at 12:46:20PM +0100, Vittorio G (VittGam) wrote:
And LAN port is 4, it can be seen from running: swconfig dev switch0
show.
Hm, ok, sure. Sorry for the noise.
No problem :)
Also this is not exactly an MPR-A1 clone
- Update terminal window title with current directory and hostname like on
Ubuntu.
- Add an optional colored prompt, in case user wants to enable it.
- Add ll, an useful alias to ls.
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git a/package/base-files/files/etc/profile
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git a/package/base-files/files/lib/functions/leds.sh
b/package/base-files/files/lib/functions/leds.sh
index 4ac8145..d4d4512 100644
--- a/package/base-files/files/lib/functions/leds.sh
+++
It is not needed anymore as TCP packets get passed correctly now even when VLAN
is disabled.
This piece of code also broke routers where the LAN port is not wired to port 0
of the internal switch.
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 9c49c5c..405a6c0 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets
get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN
MAC
this would be
fine?
Cheers,
Vittorio
Il 18.10.2014 21:37 Felix Fietkau ha scritto:
On 2014-10-14 20:05, Vittorio G (VittGam) wrote:
The uapsd
option sets the uapsd_advertisement_enabled flag in hostapd, only if the
phy actually supports the option. Signed-off-by: Vittorio Gambaletta
Hi Felix,
Yes, they will not be used again with the to-be-modified
http://patchwork.openwrt.org/patch/6468/ [2] patch.
I will send the new
patch along with the other one.
Cheers,
Vittorio
Il 18.10.2014 21:35
Felix Fietkau ha scritto:
On 2014-10-14 20:04, Vittorio G (VittGam)
wrote
I'm sorry, I've sent the wrong diff. Actually the code is right, but
the diff is based on the root filesystem and not on the source repo.
I'm going to send an updated patch (actually, two patches, so it is
cleaner :) ).
Regards,
Vittorio G
___
- Fix the call to hostapd_set_bss_options in mac80211.sh, since $vif is not
defined in the calling context, and $phy was not being passed to the function.
- Swap $vif and $phy in hostapd_set_bss_options, to be coherent with the old
function with the same name defined in the hostapd-common-old
The uapsd option sets the uapsd_advertisement_enabled flag in hostapd, only if
the phy actually supports the option.
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
---
package/network/services/hostapd/files/netifd.sh |9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
The wpa_psk_file option offers the possibility to use a different WPA-PSK key
for each client. The directive points to a file with the following syntax:
mac_address wpa_passphrase_or_hex_key
Example:
00:11:22:33:44:55 passphrase_for_client_1
00:11:22:33:44:67 passphrase_for_client_2
This patch fixes LED definitions for the DRAGINO2 board.
1. It renames the Router/USB led to System, as it is now marked SYS on the
board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN,
This patch adds uapsd and wpa_psk_file options to hostapd.
It also fixes the hostapd_set_bss_options call in mac80211.sh.
The uapsd option sets the uapsd_advertisement_enabled flag in hostapd, only if
the adapter actually supports the option.
The wpa_psk_file offers the possibility to use a
P.s.: This would fix ticket #15283. ___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Hi Joseph,
Thank you for the patch! But there is an error here:
On Mar 3, 2014 5:59 PM, Joseph CG Walker joe+open...@chubbypenguin.net
wrote:
+define Package/hostpad-common/conffiles
+/etc/config/hostpad.vlan
+endef
Hostpad instead of hostapd. ;)
Regards,
Vittorio G
Hi,
This patch fixes a regression introduced with r38787.
Before patching:
/usr/sbin/ntpd -n -l -p server1 server2 server3 server4
After patching:
/usr/sbin/ntpd -n -l -p server1 -p server2 -p server3 -p server4
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
---
---
Hello Kristian,
On 29 Nov 2013 16:41, Kristian Evensen kristian.even...@gmail.com wrote:
Hello,
I am currently working on an embedded project based on the Atheros
AR9344 SoC. As a prototype device, we are using the TP-Link TL-WDR4300
router (http://wiki.openwrt.org/toh/tp-link/tl-wdr4300)
On 29 Nov 2013 18:56, Vittorio G (VittGam) open...@vittgam.net wrote:
Also it could be a defective router; I once had a defective TL-MR3020
(AR9330-based) router that crashed on a 3G dongle with many different hubs
and power adapters. I bought another router of the same model but more
recent
Hi,
This patch adds require_ht parameter support to mac80211 uci config.
After applying this patch, the require_ht parameter can be used in the
wifi-device section like this:
config wifi-device 'radio0'
option type 'mac80211'
option channel '13'
option macaddr
Hi,
The TP-LINK TL-MR3220 v2 has a button on the left side labeled WIFI. This is
GPIO 24.
This patch adds the support for this button.
Signed-off-by: Vittorio Gambaletta open...@vittgam.net
---
--- trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
2012-12-19
96 matches
Mail list logo