Am 18.02.2019 um 22:38 schrieb Hartmut Birr:
Hi,
this is my wireless configuration. I build hostapd with the internal radius
server enabled and set the expected
configuration for the internal radius server for hostapd if config value for
auth_server isn't given or empty.
config wifi-device
Hi,
this is my wireless configuration. I build hostapd with the internal radius
server enabled and set the expected
configuration for the internal radius server for hostapd if config value for
auth_server isn't given or empty.
config wifi-device 'radio0'
option type 'mac80211'
On Saturday, 16 February 2019 22:36:18 CET Christian Lamparter wrote:
> @Ben can you please take a peek into your wave-1 firmware and check if the
> mgmt_rate WMI (WMI_10X_VDEV_PARAM_MGMT_RATE) is supported, or if there is
> a bad interaction somewhere else?
I am using the same driver and
On 02/16/2019 01:36 PM, Christian Lamparter wrote:
Hello,
On Thursday, February 14, 2019 6:43:26 PM CET e9hack wrote:
a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi
on my Archer C7 router.
I get the following entries in the log file:
Firmware is:
ath10k_pci
Hello,
On Thursday, February 14, 2019 6:43:26 PM CET e9hack wrote:
> a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi
> on my Archer C7 router.
> I get the following entries in the log file:
>
> Firmware is:
> ath10k_pci :00:00.0: firmware ver
Am 16.02.2019 um 02:44 schrieb Jeff Kletsky:
> Are you running "classic" ath10k drivers and firmware, or the default
> ath10k-ct drivers and firmware?
It is the default ath10k-ct
> You should have a line similar to
>
> ath10k_pci :00:00.0: firmware ver 10.2.4-1.0-00041 api 5 features
>
Are you running "classic" ath10k drivers and firmware, or the default
ath10k-ct drivers and firmware?
You should have a line similar to
ath10k_pci :00:00.0: firmware ver 10.2.4-1.0-00041 api 5 features
no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 f43fa422
Which firmware version does it
Hi,
a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi
on my Archer C7 router. I get the
following entries in the log file:
Thu Feb 14 18:27:01 2019 daemon.err hostapd: Failed to set beacon parameters
Thu Feb 14 18:27:01 2019 daemon.err hostapd: Interface
