On Thu, 2015-02-26 at 09:06 +0100, John Crispin wrote:
you might want to consider the td8970. it works well for many people
but
also has the slow spi flash problem and takes ages the boot.
Considering that the whole target is heading for unsupported status, I
don't understand how switching to
On Sun, 15 Feb 2015 05:21:34 +, Daniel Gimpelevich wrote:
On Sat, 14 Feb 2015 19:55:03 +0100, John Crispin wrote:
ok, i think the spi clock is just really slow
m25p80@0 {
#address-cells = 1;
#size-cells = 1;
On Thu, 26 Feb 2015 07:23:20 +0100, John Crispin wrote:
no idea what the poblem is. you'll have to wait till someone comes a
long that has time to debug your problem.
Considering that nobody else is working on lantiq, :(
___
openwrt-devel mailing list
On 26/02/2015 02:57, Daniel Gimpelevich wrote:
On Sun, 15 Feb 2015 05:21:34 +, Daniel Gimpelevich wrote:
On Sat, 14 Feb 2015 19:55:03 +0100, John Crispin wrote:
ok, i think the spi clock is just really slow
m25p80@0 {
#address-cells = 1;
could you also show me the bootlog on 3.14 please
On 22/02/2015 20:40, Roger Pueyo Centelles wrote:
Sure.
U-Boot 2013.10-openwrt5-00014-g0b78b5c-dirty (Mar 11 2014 - 22:56:27)
arv7519rw
Board: Lantiq ARV7519RW VRX200 Family Board
SoC: Lantiq VRX288 v1.1
CPU: 500 MHz
IO:250 MHz
Hi John,
I tested Linux 3.18.7 on three different lantiq boards (ARV4518PW,
ARV7518PW, ARV7159RW22). Here are the results:
*ARV4518PW*
Boot: Yes (Linux OpenWrt 3.18.7 #1 Sun Feb 22 09:51:57 CET 2015 mips
GNU/Linux)
Ethernet: Yes
Switch: Yes
Wireless: Probably yes¹²
ADSL: Not tested, but
Sure.
U-Boot 2013.10-openwrt5-00014-g0b78b5c-dirty (Mar 11 2014 - 22:56:27) arv7519rw
Board: Lantiq ARV7519RW VRX200 Family Board
SoC: Lantiq VRX288 v1.1
CPU: 500 MHz
IO:250 MHz
BUS: 250 MHz
BOOT: NOR
DRAM: 128 MiB
Flash: 32 MiB
In:serial
Out: serial
Err: serial
Net:
On 22/02/2015 15:26, Roger Pueyo Centelles wrote:
*ARV7519RW22* Boot: No (kernel panic, see ³ and attached dmesg)
Works with 14.07 image.
can i see the full bootlog please
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On Sat, 14 Feb 2015 19:55:03 +0100, John Crispin wrote:
ok, i think the spi clock is just really slow
m25p80@0 {
#address-cells = 1;
#size-cells = 1;
compatible = s25fl129p0;
reg
ok, i think the spi clock is just really slow
m25p80@0 {
#address-cells = 1;
#size-cells = 1;
compatible = s25fl129p0;
reg = 0 0;
linux,modalias = m25p80,
PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console output) when trying to reboot from
cli/luci, but only when dsl_control is started at boot, without attached
line or with dsl_control excluded from running on boot, everything
works ok,
On Fri, 13 Feb 2015 09:23:16 +0100, Sylwester Petela wrote:
PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console output) when trying to reboot from
cli/luci, but only when dsl_control is started at boot, without
attached
line or with
look at /proc/cpuinfo please and tell us how many bogomips are reported
On 13/02/2015 19:32, Daniel Gimpelevich wrote:
On Fri, 13 Feb 2015 09:23:16 +0100, Sylwester Petela wrote:
PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console
On Fri, 13 Feb 2015 19:43:32 +0100, John Crispin wrote:
look at /proc/cpuinfo please and tell us how many bogomips are reported
system type : AR9 rev 1.2
machine : DGN3500 - Netgear DGN3500
processor : 0
cpu model : MIPS 34Kc V4.12
BogoMIPS
On 10/02/2015 10:40, Daniel Gimpelevich wrote:
Is there a patchset I could try?
try r44421 or newer
On Mon, 2015-02-09 at 12:44 -0800, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 21:27 +0100, John Crispin wrote:
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On
On Thu, 12 Feb 2015 18:38:09 +0100, John Crispin wrote:
ah i see, not even sure why we attach that info. the mtdsplid should
automatically set the root=
try removing the root= parameter please and see if it boots properly
That was there to override the root= from the bootloader, otherwise it
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin blo...@openwrt.org wrote:
On 10/02/2015 10:40, Daniel Gimpelevich wrote:
Is there a patchset I could try?
try r44421 or newer
Tried initramfs, bootlog attached.
[0.00] Linux version 3.18.6 (danielg4@chimera) (gcc version 4.8.3
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin blo...@openwrt.org wrote:
On 10/02/2015 10:40, Daniel Gimpelevich wrote:
Is there a patchset I could try?
try r44421 or newer
Tried
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us
mailto:dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin blo...@openwrt.org
mailto:blo...@openwrt.org
On Thu, Feb 12, 2015 at 9:33 AM, John Crispin blo...@openwrt.org wrote:
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us
mailto:dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12,
On 12/02/2015 18:33, John Crispin wrote:
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us
mailto:dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin
John Crispin j...@phrozen.org writes:
On 10/02/2015 19:35, Joerg Hollmann wrote:
Hello Daniel,
could it be, that the definition of the kernel partition in the dts
file of your device ist too small?
i think the problem is that spi-gpio is either not loaded or loaded
too late. i
Is there a patchset I could try?
On Mon, 2015-02-09 at 12:44 -0800, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 21:27 +0100, John Crispin wrote:
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or
On 10/02/2015 19:35, Joerg Hollmann wrote:
Hello Daniel,
could it be, that the definition of the kernel partition in the dts
file of your device ist too small?
i think the problem is that spi-gpio is either not loaded or loaded
too late. i wont have time to look at it till friday though.
Got problem with pci on P-2812HNU-F1, it was simply not initialized (missing
whole pci part in bootlog), I've added target/linux/lantiq/xrx200/config-3.18
from config-3.14(changed only UBI_GLUEBI to UBI_BLOCK), and pci went back, not
sure how build config is generated but that solved my
On 10/02/2015 21:40, Sylwester Petela wrote:
Got problem with pci on P-2812HNU-F1, it was simply not initialized (missing
whole pci part in bootlog), I've added target/linux/lantiq/xrx200/config-3.18
from config-3.14(changed only UBI_GLUEBI to UBI_BLOCK), and pci went back,
not sure how
On Mon, 2015-02-09 at 13:30 +0100, John Crispin wrote:
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack of a vdsl line.
could someone please do so.
@antii: can you rebase/resnd the dwc2 series ? it does not apply to
there is no ar9 target. can you give me your .config file please ?
On 09/02/2015 18:30, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 13:30 +0100, John Crispin wrote:
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack
On 09/02/2015 18:30, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 13:30 +0100, John Crispin wrote:
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack of a vdsl line.
could someone please do so.
@antii: can you
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or newer please
SPI flash is not detected, bricking the device.
___
openwrt-devel mailing list
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or newer please
SPI flash is not detected, bricking the device.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On Mon, 2015-02-09 at 21:27 +0100, John Crispin wrote:
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or newer please
SPI flash is not detected, bricking the device.
[0.00] Linux version
I'll test it today.
9 lut 2015 13:30 John Crispin blo...@openwrt.org napisał(a):
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack of a vdsl line.
could someone please do so.
@antii: can you rebase/resnd the dwc2 series
33 matches
Mail list logo