On 20/01/2015 18:44, Cezary Jackiewicz wrote:
$ht variable is not passed. $htmode is.
With this, wpa_supplicant-phy0.conf contains htmode line if htmode is set in
config.
Signed-off-by: Cezary Jackiewicz cezary.jackiew...@gmail.com
---
diff --git
On 23/01/2015 18:27, Cezary Jackiewicz wrote:
Dnia 2015-01-22, o godz. 14:41:33
John Crispin blo...@openwrt.org napisał(a):
can you explain your wifi setup so that we can figure out how to
properly fix this ?
config wifi-device 'radio1'
option type 'mac80211'
option hwmode
On 04/02/2015 17:08, Roger Pueyo Centelles wrote:
Hi,
2015-02-04 12:44 GMT+01:00 Chuanhong Guo gch981...@gmail.com
mailto:gch981...@gmail.com:
From: 郭传鈜 gch981...@gmail.com mailto:gch981...@gmail.com
2ghz should be disabled on this router.
You're right. This should be
On 04/02/2015 07:04, John Crispin wrote:
On 04/02/2015 07:02, Cezary Jackiewicz wrote:
These file is not used by system.
erm, how is that unused ? people use it for hooking stuff into the
motion detection of the belkin webcams. if at all, move it into the
matching driver package
On 04/02/2015 07:02, Cezary Jackiewicz wrote:
These file is not used by system.
erm, how is that unused ? people use it for hooking stuff into the
motion detection of the belkin webcams. if at all, move it into the
matching driver package
Signed-off-by: Cezary Jackiewicz
On 04/02/2015 20:18, Roger Pueyo Centelles wrote:
Hi,
I tried with 0x8004 and I also got a random IP address. Actually,
I changed this block in in eeprom.c (line 571) [1]:
can you do a hexdump -C /dev/mtd2 and paste the output please ?
___
ff ff ff ff ff ff
|.EF.|
81f0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
||
*
0001
The MACs are there, at 0x4, 0x28 and 0x8004.
2015-02-04 20:29 GMT+01:00 John Crispin blo...@openwrt.org
mailto:blo...@openwrt.org:
On 04/02/2015 20
On 05/02/2015 04:56, INYO L wrote:
Hi,
How can I read the TX power, Signal, and others
root@WirelessRouter:/etc# iwinfo wlan0 ESSID: wifi Access
Point: 00:0F:02:70:3C:20 Mode: Master Channel: 11 (2.462 GHz)
Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise:
On 03/02/2015 09:01, Christian Lamparter wrote:
On Tue, Feb 3, 2015 at 8:43 AM, John Crispin blo...@openwrt.org
wrote:
On 03/02/2015 08:36, Christian Lamparter wrote:
Thing is: ralink-phy.c can use some more work!
elaborate on what needs work
Link to github-source:
https
On 19/12/2014 23:47, Eric Schultz wrote:
Currently, the feeds scripts provides no way to filter by packages
by license or no license. This patch adds a search feature to feeds
which can be used to search packages by license or by no license.
Signed-off-by: Eric Schultz
On 19/01/2015 13:40, Luigi Tarenga wrote:
Signed-off-by: Luigi Tarenga luigi.tare...@gmail.com
---
version 3. sent with git send-email to avoid tabs conversion from gmail
webmail.
crossing fingers :)
Luigi
looks good however ...
---
target/linux/ar71xx/base-files/etc/diag.sh
On 20/01/2015 01:21, Owen Kirby wrote:
Add hotplug support for tty devices in /etc/inittab that are specified
by the askfirst
keyword so that terminals attached after boot time get console processes
started.
This was tested on an AT91 target using the gadget serial subsystem and
on an
Hi,
thanks for the patch --
https://dev.openwrt.org/changeset/44055
also big thanks to Mingyu for spending so much time in fixing the
ethernet driver !
John
On 20/01/2015 07:07, wengbj wrote:
---
.../linux/ramips/base-files/etc/board.d/02_network |1 +
r44000 r44007 ??
On 20/01/2015 14:19, drEagle wrote:
Hi Luka,
Is this patch missed or lost ? I do not find any trace at
patchworks.
Do you need that I resubmit it ?
Regards, Gérald
Le 20/12/2014 03:51, Gerald Kerma a écrit :
Fix missing parameters in 01_leds
Signed-off-by:
I pushed the patch to BB and trunk and added the missing ar71xx:
prefix to the subject.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 21/01/2015 13:53, Duda, Lukasz wrote:
+ DEPENDS:=+kmod-bluetooth @!LINUX_3_3 @!LINUX_3_8 @!LINUX_3_10
+@!LINUX_3_13 @!LINUX_3_14
this is also wrong, @!(LINUX_3_3||LINUX_3_8||..)) is the correct syntax.
please resend a fixed version
___
On 21/01/2015 10:35, Ben Mulvihill wrote:
Hello,
This is a patch to go in target/linux/lantiq/patches-3.14/
please send a patch that adds the file instead of just sending the file
It corrects the fpi clock value on lantiq ar9. See this discussion
for further details:
On 21/01/2015 23:13, daniel wrote:
The current version of snort fails to build because the libuuid pkg
dependency is missing.
This little patch fixes the issue, please apply.
Signed-off-by: Daniel Danzberger dan...@dd-wrt.com
please send a pull request via github for packages inside the
This patch was not tested prior to sending it ... see inline
On 21/01/2015 13:53, Duda, Lukasz wrote:
Adding support 6LoWPAN over Bluetooth Low Energy in kernel 3.18.
Creating new bluetooth_6lowpan group with COFNIG_6LOWPAN and
CONFIG_BT_6LOWPAN.
Adding kernel object dependencies for
On 20/01/2015 23:20, Eric Schultz wrote:
Currently, the feeds scripts provides no way to filter by packages by license
or no license.
This patch adds a search feature to feeds which can be used to search
packages by license or by no license.
Calls to script/feeds which do not use the
On 22/01/2015 03:55, Mathieu Olivari wrote:
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package
in a feed but with a different name, which causes all kind of
problems related to dependencies (all packages
On 22/01/2015 09:48, Duda, Lukasz wrote:
Adding support 6LoWPAN over Bluetooth Low Energy in kernel 3.18.
Creating new bluetooth_6lowpan group with CONFIG_6LOWPAN and
CONFIG_BT_6LOWPAN.
Adding kernel object dependencies for 6LoWPAN over Bluetooth Low Energy.
the mail contains a
is this patch correct and should be merged or is it a RFC ?
http://patchwork.ozlabs.org/patch/431024/
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 22/01/2015 10:11, Ben Mulvihill wrote:
On Thu, 2015-01-22 at 08:34 +0100, John Crispin wrote:
On 21/01/2015 10:35, Ben Mulvihill wrote:
Hello,
This is a patch to go in target/linux/lantiq/patches-3.14/
please send a patch that adds the file instead of just sending the file
Sure
On 22/01/2015 10:16, Duda, Lukasz wrote:
Signed-off-by: Lukasz Duda lukasz.duda...@nordicsemi.com
is this email addr valid ? it is not the one you used for sending the
patch
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On 17/01/2015 19:19, Gianluca Anzolin wrote:
Il 17/01/2015 13:53, John Crispin ha scritto:
On 17/01/2015 08:42, Gianluca Anzolin wrote:
Il 17/01/2015 07:41, John Crispin ha scritto:
There is also a bugreport in the bug tracking system
pointing at this issue:
https://dev.openwrt.org
On 30/12/2014 06:01, Matthias Schiffer wrote:
I had read the mails regarding the issue and I've asked about it
in #openwrt-devel (but didn't get an answer yet). I didn't try
changing the channel though as I'm in a very noisy environment
(WLAN-wise) at the moment, so I can't really do any
On 19/01/2015 18:05, beeronice wrote:
John Crispin blo...@openwrt.org wrote:
On 19/01/2015 16:54, Karl Palsson wrote:
The wiki page for
http://wiki.openwrt.org/doc/howto/hardware.button refers to
https://dev.openwrt.org/changeset/37336 procd: make old
button hotplug rules work until
On 19/01/2015 16:54, Karl Palsson wrote:
Hi,
The wiki page for
http://wiki.openwrt.org/doc/howto/hardware.button refers to
https://dev.openwrt.org/changeset/37336 procd: make old button
hotplug rules work until all packages are migrated
Which imply that procd took over hotplug
nack, using magic delays is a no go
On 16/01/2015 04:15, Owen Kirby wrote:
If a process with a tty is specified in inittab, delay the worker
process until the tty exists.
This allows starting consoles with terminals that get delayed until
after procd is reads inittab,
and it also allows
Thanks, Owen
On 15-01-15 10:31 PM, John Crispin wrote:
nack, using magic delays is a no go
On 16/01/2015 04:15, Owen Kirby wrote:
If a process with a tty is specified in inittab, delay the
worker process until the tty exists.
This allows starting consoles with terminals that get delayed
On 16/01/2015 22:45, Mathieu Olivari wrote:
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package
in a feed but with a different name, which causes all kind of
problems related to dependencies (all packages
On 16/01/2015 19:57, Gianluca Anzolin wrote:
Hi,
I noticed that on Archer C7 the 2.4Ghz and 5Ghz leds are swapped:
this is the relevant section of /etc/config/system
config led 'led_wlan2g' option name 'WLAN2G' option sysfs
'tp-link:blue:wlan2g' option trigger 'phy0tpt'
config led
On 16/01/2015 13:04, Luigi Tarenga wrote:
Signed-off-by: Luigi Tarenga luigi.tare...@gmail.com
---
I send the patch again, maybe it was not formatted correctly.
please let me know if there is any problem in how i send it.
regards
Luigi
---
package/libs/openssl/Makefile
On 15/01/2015 22:47, Christian Lamparter wrote:
This adds support for a rt5350-based portable nas solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0-sata
bridge VLI VL701.
[]
diff --git
On 11/01/2015 12:48, open...@rogerpueyo.com wrote:
From: Roger Pueyo Centelles roger.pu...@guifi.net
description and SoB are missing
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 5 +
On 13/01/2015 18:00, Matti Laakso wrote:
Some Huawei mobile broadband sticks utilizing the NCM protocol expose
the control channel as a cdc-wdm device node instead of a virtual TTY.
This device node does not support the terminal ioctls. This patch
adds a check whether the provided device is
On 17/01/2015 08:42, Gianluca Anzolin wrote:
Il 17/01/2015 07:41, John Crispin ha scritto:
There is also a bugreport in the bug tracking system pointing at
this issue: https://dev.openwrt.org/ticket/18188
I looked at the ath9k implementation and I've come up with the
attached patch.
Do
On 25/12/2014 02:29, Vittorio G (VittGam) wrote:
It is not needed anymore as TCP packets get passed correctly now
even when VLAN is disabled.
are you sure this is the case for all rt3x5x, rt5350 and mt7628 units ?
This piece of code also broke routers where the LAN port is not
wired to
On 17/01/2015 14:49, Christian Lamparter wrote:
On Saturday, January 17, 2015 07:48:24 AM John Crispin wrote:
On 15/01/2015 22:47, Christian Lamparter wrote:
This adds support for a rt5350-based portable nas solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD
On 12/01/2015 20:16, Heiner Kallweit wrote:
Patches 1-3 are improvements w/o functional change.
merged 1-3
4-6 will need a bit more time and a closer look
Patches 4 allows to control EEE PHY sleep mode per port via swconfig.
Motivation is that as workaround for issues with certain
On 21/01/2015 11:32, Rafał Miłecki wrote:
I'm trying to use uclient to monitor my home network servers querying
http://ip/status . So far I was using bash + curl, but I'm trying to
learn libubox now.
So today I accidentally queried some unknown machine (random IP) and
my app crashed.
On 11/02/2015 15:42, Stefan Tomanek wrote:
Dies schrieb Stefan Tomanek (stefan.tomanek+open...@wertarbyte.de):
Any feedback regarding this backported feature?
this patch is fine, the log file one scares me though as there is no
log rotate logic.
What kind of log rotate logic do you
On 17/02/2015 18:16, Matthias Schiffer wrote:
On 01/28/2015 11:00 PM, John Crispin wrote:
On 28/01/2015 21:31, Matthias Schiffer wrote:
On 01/28/2015 11:54 AM, John Crispin wrote:
[...]
this should not break anything with multiple ubus calls. the
default behavior also wont change
yep, fixes the problem. please push it :)
On 12/02/2015 12:47, Rafał Miłecki wrote:
---
John can you give it a try, please?
---
.../generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c | 15
++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git
[0.564000] Creating 4 MTD partitions on spi32766.0:
[0.568000] 0x-0x0001 : uboot
[0.572000] 0x0001-0x0002 : uboot-env
[0.58] 0x0002-0x0003 : calibration
[0.584000] 0x0005-0x00ff : firmware
[0.596000]
On 12/02/2015 21:18, Rafał Miłecki wrote:
On 12 February 2015 at 21:04, John Crispin blo...@openwrt.org wrote:
[0.564000] Creating 4 MTD partitions on spi32766.0:
[0.568000] 0x-0x0001 : uboot
[0.572000] 0x0001-0x0002 : uboot-env
[0.58
Hi,
just bumped the kernel for the tl-wdr4900. i don't actually have the
unit. anyone around that feels like testing the images before i push the
series to trunk ?
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On 10/02/2015 10:40, Daniel Gimpelevich wrote:
Is there a patchset I could try?
try r44421 or newer
On Mon, 2015-02-09 at 12:44 -0800, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 21:27 +0100, John Crispin wrote:
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote
of?
i wish i had. best if you flash the image, see if wifi and ethernet
work, thats the best we can do right now i guess :-)
thanks,
John
Regards Philipp
On Thu, Feb 12, 2015 at 12:31:07PM +0100, John Crispin wrote:
Hi,
just bumped the kernel for the tl-wdr4900. i don't actually
On 12/02/2015 08:55, Rafał Miłecki wrote:
As you could notice I've improved mtdsplit_uimage a bit:
https://dev.openwrt.org/changeset/44412/
https://dev.openwrt.org/changeset/44413/
https://dev.openwrt.org/changeset/44414/
https://dev.openwrt.org/changeset/44415/
This should add support
Hi,
found something while merging the patches. see below ...
On 10/02/2015 13:10, Yousong Zhou wrote:
- Allow --command-line parameters of kexec-tools be parsed and used by
the kernel.
- For malta machine, mark kernel code and kernel data segments as
System RAM instead of reserved in
Hi Matti,
On 12/02/2015 20:34, Matti Laakso wrote:
Hi,
Is there a way to specify in a Makefile for a kernel module that the entry
under /etc/modules.d should be created with a specific option? For example
mymodule option=1
that syntax is already supported by kmodloader
I looked
this one is ok, just pulled it into my tree
On 11/02/2015 18:42, Stefan Tomanek wrote:
Dies schrieb John Crispin (blo...@openwrt.org):
Any more feedback regarding both patches?
still on my todo, sorry for the delay it'll take a few more days till i
can go over all the hostapd patches
nak on this one as it was rejected upstream aswell
On 21/01/2015 14:59, Stefan Tomanek wrote:
This change adds the configuration option assoc_log_file to hostapd, making
it possible to specify a log file to which clients joining and parting the
corresponding BSS are written.
Every BSS can
On 16/02/2015 21:47, Paul Blazejowski wrote:
On Mon, 2015-02-16 at 08:10 +0100, John Crispin wrote:
On 16/02/2015 00:15, Paul Blazejowski wrote:
00 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 21.73] cfg80211: (549 KHz - 573 KHz @ 16 KHz),
(N/A, 2000 mBm), (0 s)
[ 21.74
On 16/02/2015 21:47, Paul Blazejowski wrote:
On Mon, 2015-02-16 at 08:10 +0100, John Crispin wrote:
On 16/02/2015 00:15, Paul Blazejowski wrote:
00 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 21.73] cfg80211: (549 KHz - 573 KHz @ 16 KHz),
(N/A, 2000 mBm), (0 s)
[ 21.74
On 19/02/2015 03:29, Owen Kirby wrote:
The following are some fixes from testing the v3.18 update to the
at91 target. In particular, I found that the drivers for the
poweroff and reset controllers were missing (they were built
implicitly in 3.14), which would cause the router to hang when
On 19/02/2015 02:54, Owen Kirby wrote:
The directory layout of the USB gadget subsystem changed between kernels
3.14 and
3.18, so the makefile for kmod-usb-eth-gadget and kmod-usb-serial-gadget
need to
be adjusted to match.
i think this will break 3.14 builds and we should use the new
Hi,
On 27/01/2015 03:49, Matthias Schiffer wrote:
In larger networks, especially big batman-adv meshes, it may be desirable to
enable IGMP snooping on every bridge without enabling the multicast querier
to specifically put the querier on a well-connected node.
This patch adds a new UCI
On 27/01/2015 03:49, Matthias Schiffer wrote:
In larger networks, especially big batman-adv meshes, it may be desirable to
enable IGMP snooping on every bridge without enabling the multicast querier
to specifically put the querier on a well-connected node.
This patch adds a new UCI option
On 28/01/2015 13:30, Matthias Schiffer wrote:
On 01/28/2015 11:54 AM, John Crispin wrote:
Hi,
On 27/01/2015 03:49, Matthias Schiffer wrote:
In larger networks, especially big batman-adv meshes, it may be
desirable to enable IGMP snooping on every bridge without
enabling the multicast
On 28/01/2015 17:56, Stefan Tomanek wrote:
Dies schrieb Stefan Tomanek
(stefan.tomanek+open...@wertarbyte.de):
This change adds the configuration options bssid_whitelist and
bssid_blacklist used to limit the AP selection of a network to
a specified (finite) set or discard certain APs.
On 28/01/2015 21:31, Matthias Schiffer wrote:
On 01/28/2015 11:54 AM, John Crispin wrote:
Hi,
On 27/01/2015 03:49, Matthias Schiffer wrote:
In larger networks, especially big batman-adv meshes, it may be
desirable to enable IGMP snooping on every bridge without
enabling the multicast
On 09/01/2015 09:16, Vittorio G (VittGam) wrote:
Hi,
What is the reason has this been rejected? Do I need to change
something?
Thanks, Vittorio
Il 28.12.2014 13:34 Vittorio G (VittGam) ha scritto:
The mkhootoofw.sh is a shell script, because official factory
images are shell scripts
On 09/02/2015 21:56, Bruno Randolf wrote:
[0.00] Kernel command line: root=/dev/mtdblock/0
console=ttyS0,115200 root=/dev/mtdblock0 rootfstype=squashfs,jffs2
what does that look like on 3.14 ? on mediatek the bug was that the
wrong cmdline was used, causing a bad base_baud to be set
Hi,
the subject is wonky
On 09/02/2015 15:55, . wrote:
From d1f104b6fe94507a80b85943fd1d4ba895f4e0a0 Mon Sep 17 00:00:00
2001 From: Detlef Schmitt blubb...@nurfuerspam.de
not sure what to think of this email addr
Date: Mon, 9 Feb 2015 15:35:28 +0100 Subject: [PATCH 2/2]
daemon.notice
On 09/02/2015 21:56, Bruno Randolf wrote:
Hi John,
Something's wrong with the serial, but I was able to login via Ethernet.
I did not verify PCI yet, as I only have a PCI adapter on the cubes
which are in use.
Serial log below:
bruno
On 02/09/2015 12:26 PM, John Crispin wrote
On 09/02/2015 18:12, Florian Fainelli wrote:
Could you share the boot log to see if there is anything obvious?
Hi,
without uart i get no bootlog. i just see the coloured palette on the
hdmi. but the uart stays quiet. i am starting to wonder if the uart is dead.
John
there is no ar9 target. can you give me your .config file please ?
On 09/02/2015 18:30, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 13:30 +0100, John Crispin wrote:
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack
On 09/02/2015 18:30, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 13:30 +0100, John Crispin wrote:
Hi,
i bumped the lantiq support to v3.18 and tested it on 6 different
boards. I have not tested vdsl support due to lack of a vdsl line.
could someone please do so.
@antii: can you
look at /proc/cpuinfo please and tell us how many bogomips are reported
On 13/02/2015 19:32, Daniel Gimpelevich wrote:
On Fri, 13 Feb 2015 09:23:16 +0100, Sylwester Petela wrote:
PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console
wrote:
On Fri, 13 Feb 2015 19:43:32 +0100, John Crispin wrote:
look at /proc/cpuinfo please and tell us how many bogomips are reported
system type : AR9 rev 1.2
machine : DGN3500 - Netgear DGN3500
processor : 0
cpu model : MIPS 34Kc
On 14/02/2015 17:26, Russell Senior wrote:
fixes bug introduced by r44349 which prevents, e.g. AsiaRF AWM002
from booting.
oops my bad, the config files currently used are the ones for 3.18
i will push a different patch that adds the old files in a sec
Signed-off-by: Russell Senior
On 15/02/2015 00:31, David Lang wrote:
On Sat, 14 Feb 2015, Nikos Mavrogiannopoulos wrote:
Hello, I've added libseccomp into packages. That library allows
programs to easily restrict the system calls they are allowed to
use. In turn that uses the kernel's seccomp filter. That's one of
i folded all 4 patches into 1 prior to the commit
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Hi,
late reply, see below
On 01/02/2015 13:48, Chuanhong Guo wrote:
From: 郭传鈜 gch981...@gmail.com
This patch adds support for QCA953Xv2 SoC.
I got this patch from QSDK here:
wrote:
Is there a patchset I could try?
On Mon, 2015-02-09 at 12:44 -0800, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 21:27 +0100, John Crispin wrote:
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or newer
ship mine till the 13th, so i wont be able to play with it
till start of next week. patches welcome, as always ;)
El 10/02/2015 a las 20:02, John Crispin escribió:
On 10/02/2015 19:53, Álvaro Fernández Rojas wrote:
Okay, it's working now:
http://files.noltari.es/openwrt/bcm2708/bcm2708_3
On 10/02/2015 19:53, Álvaro Fernández Rojas wrote:
Okay, it's working now:
http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt
Patches:
http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz
:-) one less todo off my list. just merged it locally and started a test
build.
On 10/02/2015 22:42, Rafał Miłecki wrote:
On 10 February 2015 at 15:09, Daniel Golle dan...@makrotopia.org
wrote:
simple-framebuffer now works on the A20.
I'm really not sure about other developers opinion (will be happy
to hear it), but I guess you could try to generate a patch using
the problem is
has anyone got a line that uses ptm ? i had to make an api update to the
ptm driver to get it to compile
W dniu 2015-02-10 o 19:39, John Crispin pisze:
On 10/02/2015 19:35, Joerg Hollmann wrote:
Hello Daniel,
could it be, that the definition of the kernel partition in the dts
[...]
On 11/02/2015 03:38, Mathieu Olivari wrote:
.../0179-spi-qup-Add-DMA-capabilities.patch| 490 --
...ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch | 83 -
...1-mtd-nand-qcom-Align-clk-and-reset-names.patch | 41 -
...m-Kconfig-Make-drivers-mutually-exclusive.patch | 47 -
On 11/02/2015 12:42, Álvaro Fernández Rojas wrote:
From popcornmix: https://github.com/raspberrypi/linux/issues/22
Technically 2708 is the family, and 2835 is a specific
implementation. We now know that 2835 is the only implementation in
the family that can run linux, (and there won't be
On 11/02/2015 12:33, Álvaro Fernández Rojas wrote:
-BOARDNAME:=Broadcom BCM2708/BCM2835
should this not be
+BOARDNAME:=Broadcom BCM2708/BCM2835/BCM2709
i think BCM2835 is used on one of the B+ variants
John
___
openwrt-devel mailing list
On 11/02/2015 00:13, Daniel Golle wrote:
Is there anything wrong with that? Or did anyone feel offended by
that?
no just pointing out that this might lead to the work not being used,
which ended up being the case.
___
openwrt-devel mailing list
bootlog please
On 09/02/2015 21:25, Daniel Gimpelevich wrote:
On Mon, 2015-02-09 at 19:18 +0100, John Crispin wrote:
try r44366 or newer please
SPI flash is not detected, bricking the device.
___
openwrt-devel mailing list
openwrt-devel
the 3 patches sent are white space broken and patchwork failed to pick
them up. i have manually applied this patch, but please use git for
sending patches in future.
On 06/02/2015 12:27, Marcin Mikołajczak wrote:
This patch fixes LEDs in ZyXEL NBG6716
- POWER LED was missing
- USB LEDs
Hi,
i synced our rpi port with the upstream tree on github. it boots and i
can see the coloured palette test pic on the hdmi, however ethernet
fails to come up. i attached a uart just to find out that my rpi is
either broken or i am connecting it wrong.
has anyone managed to get uart working ?
On 09/02/2015 14:07, Etienne Champetier wrote:
Hi
2015-02-09 14:01 GMT+01:00 John Crispin blo...@openwrt.org
mailto:blo...@openwrt.org:
On 09/02/2015 13:57, Etienne Champetier wrote:
Hi all,
To follow r44328
(https://dev.openwrt.org/browser/trunk?rev=44328) (jow fix for
cmake
Hi,
after some very basic testing i would suggest that
On 10/02/2015 13:10, Yousong Zhou wrote:
create mode 100644
target/linux/generic/patches-3.10/330-MIPS-Malta-Mark-kernel-code-and-kernel-data-segments.patch
create mode 100644
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us
mailto:dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin blo...@openwrt.org
mailto:blo...@openwrt.org
On 12/02/2015 18:33, John Crispin wrote:
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
dan...@gimpelevich.san-francisco.ca.us
mailto:dan...@gimpelevich.san-francisco.ca.us wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin
blo
Hi,
i just pushed the v3.18 support for ar71xx. i have tested this on
carambola2, unifi and wndr4300. the default is still at 3.14. please
start testing on more hardware.
to do so you need to set the kernel to 3.18 in
target/linux/ar71xx/Makefile as the default is still at 3.14.
Hi,
On 15/02/2015 20:56, Daniel Petre wrote:
are there any extra big advantages for OpenWrt since 3.14 ?
eBPF is my personal favorite.
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
On 15/02/2015 21:44, Michaël Zweers wrote:
Hello,
I got a error message (kernel compile log included) when building v3.18
for wr703n.
If you need additional info let me know.
please retry, i just pushed a fix
___
openwrt-devel mailing
the partitions:
http://pastebin.com/GWFYrXnT
My patches:
http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz
Regards,
Álvaro.
El 09/02/2015 a las 18:12, Florian Fainelli escribió:
On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org
mailto:blo...@openwrt.org wrote:
Hi,
i
On 16/02/2015 11:52, Nicolas FERRE wrote:
John Crispin blogic at openwrt.org writes:
Hi,
does anyone have one of these -
http://www.atmel.com/tools/ATSAMA5D3-XPLD.aspx
that he wants to donate so that i have something to test at91 images on
Hi Josh,
Of course, I can surely do
On 16/02/2015 11:05, Michaël Zweers wrote:
I can confirm that it does work, i don't no where or why it didn't the
previous time. I did a clean clone and used a clean config and now
everything looks to be oké.
Bootlog is attached:
confirmed working:
Boot: Yes
Ethernet: Yes
On 16/02/2015 00:15, Paul Blazejowski wrote:
00 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 21.73] cfg80211: (549 KHz - 573 KHz @ 16 KHz),
(N/A, 2000 mBm), (0 s)
[ 21.74] cfg80211: (5735000 KHz - 5835000 KHz @ 8 KHz),
(N/A, 2000 mBm), (N/A)
[ 21.75] cfg80211:
801 - 900 of 2043 matches
Mail list logo